Knock down von Desmoglein 2 durch induzierbare Cre-spezifische Rekombination in der Maus

Desmosomen sind hoch organisierte adhäsive interzelluläre Verbindungen, die benachbarte Zellen durch Verankerung mit den Intermediärfilamenten des Zytoskeletts miteinander verknüpfen und so Zellen und Geweben Stabilität verleihen. Die Adhäsionsmoleküle der Desmosomen sind die desmosomalen Cadherine. Diese transmembranen Glykoproteine gehen im Interzellulärraum Verbindungen mit den desmosomalen Cadherinen der Nachbarzelle ein und sind im zytoplasmatischen Bereich Anheftungspunkte für weitere an der Desmosomenbildung beteiligte Proteine. Ziel dieser Arbeit war die Untersuchung der Rolle von Desmoglein 2 (Dsg 2), einem in allen Epithelien exprimierten desmosomalen Cadherin. Da der konstitutive knock out von Dsg 2 embryonal letal ist, wurde im Rahmen dieser Doktorarbeit eine transgene Maus generiert, in der die Reduktion von Dsg 2 temporär regulierbar war (konditionaler knock down). Dazu wurde der Mechanismus der RNA Interferenz genutzt, wodurch Sequenz-spezifische, post-transkriptionelle Regulation von Genen möglich ist. Unter Verwendung eines über Cre/lox-induzierbaren Vektors wurden transgene Mäuse generiert, welche nach Induktion Dsg 2 shRNA exprimieren, die in der Zelle in siRNA umgewandelt wird und zum Abbau der Dsg 2 mRNA führt. Durch Verpaarung der generierten Dsg 2 knock down Maus mit der über Tamoxifen induzierbaren Cre Deleter knock in Mauslinie Rosa26CreERT2 konnte deutliche Reduktion der Dsg 2 Proteinmenge in Leber, Darm und Herz erreicht werden. In Immunfärbungen der Leber wurde zudem eine reduzierte Desmosomenbildung durch Expression der Dsg 2 shRNA detektiert. Die für diese Versuche generierte und getestete Rosa26CreERT2 Mauslinie ermöglichte jedoch nicht in allen Zellen eines Gewebes die komplette Aktivierung der Cre Rekombinase und damit die Expression der shRNA. Dadurch entstanden mosaikartige Wildtyp/knock down-Gewebe, in denen noch ausreichend Desmosomen gebildet wurden, um die Gewebestabilität und -struktur zu erhalten. Für eine funktionale Untersuchung von Dsg 2 in Zusammenhang mit der chronisch entzündlichen Darmerkrankung Colitis ulcerosa wurden die Dsg 2 knock down Mäuse mit Darm-spezifischen, induzierbaren Cre Deleter Mäusen (VillinCreERT2) verpaart. Nach Aktivierung der Cre Rekombinase mittels Tamoxifen wurde in bitransgenen Tieren über Gabe von Azoxymethan (AOM) und Dextransodiumsulfat (DSS) Colitis ulcerosa induziert. Diese entzündliche Erkrankung des Darms ist mit der Induktion von Darmtumoren assoziiert. Bereits nach einmaliger Induktion mit AOM/DSS wurde in der ersten endoskopischen Untersuchung eine starke Entzündung des Darmgewebes und die Ausbildung von flächig wachsenden Tumoren in den Dsg 2 knock down Tieren hervorgerufen. Es ist anzunehmen, dass durch knock down von Dsg 2, und die damit verbundene verminderte Desmosomenbildung und Zelladhäsion, Infiltration von Bakterien durch die epitheliale Barriere des Darms möglich war, und so die Entzündungsreaktion in der Darmmukosa verstärkte. In Zusammenhang mit Verlust der epithelialen Festigkeit durch verringerte Zellkontakte kam es zur Hyperproliferation der Darmmukosa, die sich in Ausbildung von flächigen Tumoren äußerte. In weiteren Experimenten müssen nun die Tumore und das entzündete Gewebe der Colitis-induzierten Mäuse mittels Immunfluoreszenz untersucht werden, um Veränderungen in der Desmosomenformation in situ detektieren zu können. Des Weiteren sind Verpaarungen der Dsg 2 knock down Maus mit anderen Cre Rekombinase exprimierenden Mauslinien möglich, um den Einfluss von Dsg 2 auch in anderen Geweben, beispielsweise im Herzen, zu untersuchen. Die hier vorgelegte Arbeit zeigt also erstmalig den ursächlichen Zusammenhang zwischen Dsg 2 und dem Auftreten von Colitis-assoziierten Tumoren in einem konditionalen RNAi-vermittelten knock down Tiermodell. Die Etablierung dieser Maus ist somit das erste konditionale Mausmodell, welches die bei vielen Krebspatienten gefundenen flachzellig wachsenden Tumore in vivo rekapituliert. Vorausschauend kann man sagen, dass mit Hilfe des im Rahmen dieser Doktorarbeit entwickelten Tiermodells wichtige Erkenntnisses über die Pathologie von Darmtumoren erbracht werden können, die unser Verständnis der Colitis-induzierten Tumorentstehung verbessern.

Synthesis and surface modification of semiconductor nanocrystals

The last decade has witnessed an exponential growth of activities in the field of nanoscience and nanotechnology worldwide, driven both by the excitement of understanding new science and by the potential hope for applications and economic impacts. The largest activity in this field up to date has been in the synthesis and characterization of new materials consisting of particles with dimensions in the order of a few nanometers, so-called nanocrystalline materials. [1-8] Semiconductor nanomaterials such as III/V or II/VI compound semiconductors exhibit strong quantum confinement behavior in the size range from 1 to 10 nm. Therefore, preparation of high quality semiconductor nanocrystals has been a challenge for synthetic chemists, leading to the recent rapid progress in delivering a wide variety of semiconducting nanomaterials. Semiconductor nanocrystals, also called quantum dots, possess physical properties distinctly different from those of the bulk material. Typically, in the size range from 1 to 10 nm, when the particle size is changed, the band gap between the valence and the conduction band will change, too. In a simple approximation a particle in a box model has been used to describe the phenomenon[9]: at nanoscale dimensions the degenerate energy states of a semiconductor separate into discrete states and the system behaves like one big molecule. The size-dependent transformation of the energy levels of the particles is called “quantum size-effect”. Quantum confinement of both the electron and hole in all three dimensions leads to an increase in the effective bandgap of the material with decreasing crystallite size. Consequently, both the optical absorption and emission of semiconductor nanaocrystals shift to the blue (higher energies) as the size of the particles gets smaller. This color tuning is well documented for CdSe nanocrystals whose absorption and emission covers almost the whole visible spectral range. As particle sizes become smaller the ratio of surface atoms to those in the interior increases, which has a strong impact on particle properties, too. Prominent examples are the low melting point [8] and size/shape dependent pressure resistance [10] of semiconductor nanocrystals. Given the size dependence of particle properties, chemists and material scientists now have the unique opportunity to change the electronic and chemical properties of a material by simply controlling the particle size. In particular, CdSe nanocrystals have been widely investigated. Mainly due to their size-dependent optoelectronic properties [11, 12] and flexible chemical processibility [13], they have played a distinguished role for a number of seminal studies [11, 12, 14, 15]. Potential technical applications have been discussed, too. [8, 16-27] Improvement of the optoelectronic properties of semiconductor nanocrystals is still a prominent research topic. One of the most important approaches is fabricating composite type-I core-shell structures which exhibit improved properties, making them attractive from both a fundamental and a practical point of view. Overcoating of nanocrystallites with higher band gap inorganic materials has been shown to increase the photoluminescence quantum yields by eliminating surface nonradiative recombination sites. [28] Particles passivated with inorganic shells are more robust than nanocrystals covered by organic ligands only and have greater tolerance to processing conditions necessary for incorporation into solid state structures or for other applications. Some examples of core-shell nanocrystals reported earlier include CdS on CdSe [29], CdSe on CdS, [30], ZnS on CdS, [31] ZnS on CdSe[28, 32], ZnSe on CdSe [33] and CdS/HgS/CdS [34]. The characterization and preparation of a new core-shell structure, CdSe nanocrystals overcoated by different shells (CdS, ZnS), is presented in chapter 4. Type-I core-shell structures as mentioned above greatly improve the photoluminescence quantum yield and chemical and photochemical stability of nanocrystals. The emission wavelengths of type-I core/shell nanocrystals typically only shows a small red-shift when compared to the plain core nanocrystals. [30, 31, 35] In contrast to type-I core-shell nanocrystals, only few studies have been conducted on colloidal type-II core/shell structures [36-38] which are characterized by a staggered alignment of conduction and valence bands giving rise to a broad tunability of absorption and emission wavelengths, as was shown for CdTe/CdSe core-shell nanocrystals. [36] The emission of type-II core/shell nanocrystals mainly originates from the radiative recombination of electron-hole pairs across the core-shell interface leading to a long photoluminescence lifetime. Type-II core/shell nanocrystals are promising with respect to photoconduction or photovoltaic applications as has been discussed in the literature.[39] Novel type-II core-shell structures with ZnTe cores are reported in chapter 5. The recent progress in the shape control of semiconductor nanocrystals opens new fields of applications. For instance, rod shaped CdSe nanocrystals can enhance the photo-electro conversion efficiency of photovoltaic cells, [40, 41] and also allow for polarized emission in light emitting diodes. [42, 43] Shape control of anisotropic nanocrystals can be achieved by the use of surfactants, [44, 45] regular or inverse micelles as regulating agents, [46, 47] electrochemical processes, [48] template-assisted [49, 50] and solution-liquid-solution (SLS) growth mechnism. [51-53] Recently, formation of various CdSe nanocrystal shapes has been reported by the groups of Alivisatos [54] and Peng, [55] respectively. Furthermore, it has been reported by the group of Prasad [56] that noble metal nanoparticles can induce anisotropic growth of CdSe nanocrystals at lower temperatures than typically used in other methods for preparing anisotropic CdSe structures. Although several approaches for anisotropic crystal growth have been reported by now, developing new synthetic methods for the shape control of colloidal semiconductor nanocrystals remains an important goal. Accordingly, we have attempted to utilize a crystal phase control approach for the controllable synthesis of colloidal ZnE/CdSe (E = S, Se, Te) heterostructures in a variety of morphologies. The complex heterostructures obtained are presented in chapter 6. The unique optical properties of nanocrystals make them appealing as in vivo and in vitro fluorophores in a variety of biological and chemical investigations, in which traditional fluorescence labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple emission colours [References]. The ability to prepare water soluble nanocrystals with high stability and quantum yield has led to promising applications in cellular labeling, [57, 58] deep-tissue imaging, [59, 60] and assay labeling [61, 62]. Furthermore, appropriately solubilized nanocrystals have been used as donors in fluorescence resonance energy transfer (FRET) couples. [63-65] Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible (bio-) conjugation techniques. Based on multi-shell CdSe nanocrystals, several new solubilization and ligand exchange protocols have been developed which are presented in chapter 7. The organization of this thesis is as follows: A short overview describing synthesis and properties of CdSe nanocrystals is given in chapter 2. Chapter 3 is the experimental part providing some background information about the optical and analytical methods used in this thesis. The following chapters report the results of this work: synthesis and characterization of type-I multi-shell and type-II core/shell nanocrystals are described in chapter 4 and chapter 5, respectively. In chapter 6, a high–yield synthesis of various CdSe architectures by crystal phase control is reported. Experiments about surface modification of nanocrystals are described in chapter 7. At last, a short summary of the results is given in chapter 8.

Ansatz zur Generierung einer konditionalen, reversiblen Wt1 k.o.-Maus

Ansatz zur Generierung einer konditionalen, reversiblen Wt1 k.o.-Maus Der Wilms-Tumor (WT, Nephroblastom) ist ein embryonaler Nierentumor, der durch die maligne Transformation von undifferenziertem Nierengewebe, sog. nephrogenen Resten, entsteht. WT treten mit einer Inzidenz von 1 in 10.000 Lebendgeburten auf. Das Hauptmanifestationsalter, der normalerweise einseitig und sporadisch auftretenden Tumore, liegt zwischen dem 3. und 4. Lebensjahr. Etwa 10 % der Patienten entwickeln jedoch bilaterale Tumore. In diesen Fällen ist eine Assoziation mit komplexen genetischen Krankheitsbildern (u. a. WAGR-, Denys-Drash-, Frasier- und Beckwith-Wiedemann-Syndrom) festzustellen. In 15 % der sporadischen WT sind Mutationen im WT1 (Wilms-Tumor 1)-Gen beschrieben. WT1 besteht aus zehn Exons und weist typische Merkmale von Transkriptionsfaktoren (z. B. vier Zinkfinger) auf. Zwei alternative Spleißereignisse betreffen Exon 5 (+/−Exon 5) und Exon 9 (Transkripte mit bzw. ohne die codierenden Sequenzen für die AS Lysin-Threonin-Serin; +/−KTS). Die Lage der drei alternativ vorhandenen AS zwischen den Zinkfingern 3 und 4 bestimmt die verschiedenen Funktionen der WT1-Proteine (4 Isoformen) als Transkriptionsfaktor (−KTS) bzw. als RNA-bindendes Protein (+KTS). Das zunächst im Zusammenhang mit WT als Tumorsuppressorgen identifizierte WT1 ist ein Entwicklungsgen mit einem sehr komplexen Expressionsmuster in der Embryonalentwicklung. Dabei ist v. a. die Bedeutung in der Urogenitalentwicklung entscheidend. Konstitutive, homozygote Wt1−/− k.o.-Mäuse sind embryonal (~ E12,5 dpc) letal und bilden u. a. keine Gonaden und keine Nieren. Aus diesem Grund existiert bisher kein Wilms-Tumormodell. Die Herstellung eines konditionalen murinen Tiermodells auf Basis des Tet on/off-Systems zur Untersuchung der Nierenentwicklung bzw. zur Analyse der Wilms-Tumorpathogenese war Ziel dieser Arbeit. Hierfür wurden drei Mauslinien generiert: Zwei transgene sog. Responder-Linien, die eine chimäre spleißbare Wt1-cDNA der Variante musWt1+Exon 5;+/−KTS unter der Kontrolle eines Tet-responsiven Promotors im Genom tragen. Dieses tTA/Dox-abhängig regulierbare Wt1-Transgen (tgWt1) sollte (exogen regulierbar) die Expression des endogenen Wt1-Lokus ausreichend nachahmen, um die kritischen Phasen der Embryogenese zu überwinden und lebensfähige Tiere zu erhalten. Parallel dazu wurde die Wt1-Effektor-Mauslinie (WE2) generiert. Diese trägt einen tetrazyklinabhängigen Transaktivator (tTA) zur Steuerung Tet-regulierbarer Transgene unter der Kontrolle des endogenen Wt1-Promotors. Die durch homologe Rekombination in ES-Zellen erreichte Integration des tTA direkt am Translationsstartpunkt des Wt1-Lokus hat in den Tieren einen heterozygoten Wt1 knock out/tTA knock in zur Folge. Die bisher vorgenommenen Verpaarungen doppelt transgener Wt1-tTA+/−/Resp-Mäuse ergaben keinen Rescue des letalen Wt1 k.o. und es konnten bislang keine Wilms-Tumore induziert werden. Alle im Verlauf der Arbeit generierten Mauslinien wurden umfassend charakterisiert. So konnte für die Tiere der Responder-Linien Wt1-Resp1 (mit zusätzlichen Isolator-Sequenzen zum Schutz des Transgens vor Positionseffekten) und Wt1-Resp2 (ohne Isolatoren) konnte die Tet-induzierbare Expression und die Spleißbarkeit des tgWt1 in MEF-Assays und mittels Effektor-Mäusen auf RNA-Ebene nachgewiesen werden. Die genomische Charakterisierung der WE2-Linie ergab eine ungeklärte etwa 120 kb große Inversion am Wt1-Lokus, die alle 5'-regulatorischen Sequenzen mitsamt des tTA vom Rest von Wt1 trennt. Tiere dieser Linie weisen aber dennoch einen funktionalen Wt1 k.o. auf: Unter den Nachkommen aus Intercross-Verpaarungen von Wt1-tTA+/−-Mäusen lassen sich auf Grund der Letalität keine Wt1−/−-Genotypen nachweisen. Die Charakterisierung der Effektor-Linie auf RNA-Ebene und mittels Reporter-Mäusen liefert ein Wt1-analoges tTA-Expressionsmuster: So findet man eine deutliche tTA-Expression u. a. in Niere (Glomeruli), Uterus, Ovar und Testis. Die hier vorgestellten Experimente ergeben darüber hinaus eindeutige Hinweise einer Beteiligung von Wt1 in der Entstehung der glatten Muskulatur bzw. in der Vaskulogenese.

The coupling between electron transfer and Protein/Solvent Dynamics in Photosynthetic Reaction Centers: Spectroscopic Studies in Amorphous Matrices

We investigated at the molecular level protein/solvent interactions and their relevance in protein function through the use of amorphous matrices at room temperature. As a model protein, we used the bacterial photosynthetic reaction center (RC) of Rhodobacter sphaeroides, a pigment protein complex which catalyzes the light-induced charge separation initiating the conversion of solar into chemical energy. The thermal fluctuations of the RC and its dielectric conformational relaxation following photoexcitation have been probed by analyzing the recombination kinetics of the primary charge-separated (P+QA-) state, using time resolved optical and EPR spectroscopies. We have shown that the RC dynamics coupled to this electron transfer process can be progressively inhibited at room temperature by decreasing the water content of RC films or of RC-trehalose glassy matrices. Extensive dehydration of the amorphous matrices inhibits RC relaxation and interconversion among conformational substates to an extent comparable to that attained at cryogenic temperatures in water-glycerol samples. An isopiestic method has been developed to finely tune the hydration level of the system. We have combined FTIR spectral analysis of the combination and association bands of residual water with differential light-minus-dark FTIR and high-field EPR spectroscopy to gain information on thermodynamics of water sorption, and on structure/dynamics of the residual water molecules, of protein residues and of RC cofactors. The following main conclusions were reached: (i) the RC dynamics is slaved to that of the hydration shell; (ii) in dehydrated trehalose glasses inhibition of protein dynamics is most likely mediated by residual water molecules simultaneously bound to protein residues and sugar molecules at the protein-matrix interface; (iii) the local environment of cofactors is not involved in the conformational dynamics which stabilizes the P+QA-; (iv) this conformational relaxation appears to be rather delocalized over several aminoacidic residues as well as water molecules weakly hydrogen-bonded to the RC.

Konditionale Mutagenese von Desmoglein 2 in der Maus

Desmosomen sind hoch organisierte interzelluläre Verbindungen, die Zellverbänden eine mechanische Stabilität verleihen. Die Intermediärfilamentnetzwerke benachbarter Zellen werden mit Hilfe der desmosomalen Cadherine vom Desmoglein- und Desmocollin-Typ miteinander verknüpft. Diese Glykoproteine interagieren miteinander im Interzellularspalt zwischen benachbarten Zellen und stellen mit ihren zytoplasmatischen Domänen einen Ankerpunkt für desmosomale Brückenproteine dar, an welche wiederum die Proteine des Intermediärfilament-Zytoskeletts binden. Bei der Maus spielt das desmosomale Cadherin Desmoglein 2 (DSG2) bereits in frühen Stadien der Embryogenese eine entscheidende Rolle. Homozygote DSG2-Knockout-Mäuse sterben bereits vor der Implantation des Embryos ab. Im adulten Tier ist Dsg2 die am weitesten verbreitete Isoform, in Darm, Leber und Herzmuskel wird es zudem exklusiv exprimiert. Ziel dieser Arbeit war es, die Bedeutung von Dsg2 in differenzierten Gewebeverbänden adulter Tiere zu untersuchen. Im Rahmen dieser Doktorarbeit wurden mehrere transgene Mauslinien hergestellt, in denen mit Hilfe des Cre/loxP-Systems eine Deletion im DSG2-Gen konditional und gewebsspezifisch induziert werden konnte. Dazu wurden zuerst zwei loxP-Sequenzen und eine mit zwei FRT-Stellen flankierte Neomyzinresistenzgen-Kassette in das DSG2-Gen von embryonalen Stammzellen durch homologe Rekombination eines Targeting-Konstrukts inseriert. Diese Zellen wurden in Blastozysten injiziert und Mauslinien hergestellt. Mit Hilfe der Flpe-Rekombinase wurde anschließend die Resistenzenzgen-Kassette entfernt. Diese Stämme wurden mit Mäusen verpaart, die eine induzierbare und gewebsspezifische Synthese der Cre-Rekombinase ermöglichen. Im Darmepithel und der Leber konnte eine gewebsspezifische Rekombination des DSG2-Gens induziert werden. Untersuchungen der DSG2-mRNA zeigten, dass die DSG2-Rekombination in der Darmschleimhaut nahezu vollständig erfolgte. Immunfluoreszenz-Analysen an Gewebsfragmenten induzierter Tiere mit Isotyp-spezifischen Antikörpern, die im Rahmen dieser Arbeit hergestellt worden waren, zeigten jedoch keine signifikanten Unterschiede der Desmosomenzahl und -verteilung. Daher wurden eGFP-Hybride des zu erwartenden mutierten Dsg2-Proteins in Zellen exprimiert und mit wildtypischem Dsg2 verglichen. Es konnte hinsichtlich der Verteilung und Morphologie der Desmosomen keine Unterschiede zwischen beiden Dsg2-Proteinen festgestellt werden. Der Dsg2-Mutante fehlen wichtige Proteinbereiche, die für die trans-Interaktion der extrazellulären Domäne verantwortlich sind, die Haupt-N-Glykosylierungsstelle, sowie eine der insgesamt vier Kalzium-Bindestellen. Dies sind Eigenschaften, von denen man bisher annahm, dass sie eine zentrale Bedeutung für die desmosomale Adhäsion besitzen. Weitere Experimente werden zeigen, inwieweit die hergestellte Dsg2-Mutante in „Stresssituationen“, wie sie z.B. bei Regenerationsvorgängen oder der Tumorgenese auftreten, zu veränderten adhäsiven Eigenschaften führt.

An alternative blocking layer for titanium dioxide (TiO 2) solar cell applications

In hybrid organic solar cells a blocking layer between transparent electrode and nanocrystalline titania particles is essential to prevent short-circuiting and current loss through recombination at the electrode interface. Here the preparation of a uniform hybrid blocking layer which is composed of conducting titania nanoparticles embedded in an insulating polymer derived ceramic is presented. This blocking layer is prepared by sol-gel chemistry where an amphiphilic block copolymer is used as a templating agent. A novel poly(dimethylsiloxane) containing amphiphilic block copolymer poly(ethyleneglycol)methylethermethacrylate-block-poly(dimethylsiloxane)-block-poly(ethyleneglycol)methylethermethacrylate has been synthesized to act as the templating agent. Plasma treatment uncovered titania surface from any polymer. Annealing at 450°C under nitrogen resulted in anatase titania with polymer derived silicon oxycarbide ceramic. Electrical characterization by conductive scanning probe microscopy experiments revealed a percolating titania network separated by an insulating ceramic matrix. Scanning Kelvin probe force microscopy showed predominant presence of titania particles on the surface creating a large surface area for dye absorption. The uniformity of the percolating structures was proven by microbeam grazing incidence small angle x-ray scattering. First applications in hybrid organic solar cells in comparison with conventional titanium dioxide blocking layer containing devices revealed 15 fold increases in corresponding efficiencies. Poly(dimethylsiloxane)-block-poly(ethyleneglycol)methylethermethacrylate and poly(ethyleneoxide)-poly(dimethylsiloxane)methylmethacrylate diblock copolymers were also synthesized. Their titania nanocomposite films were compared with the integrated blocking layer. Liner poly(ethyleneoxide) containing diblock copolymer resulted in highly ordered foam like structures. The effect of heating temperature rise to 600°C and 1000°C on titania morphology was investigated by scanning electron and force microscopy and x-ray scattering. Sol-gel contents, hydrochloric acid, titania precursor and amphiphilic triblock copolymer were altered to see their effect on titania morphology. Increase in block copolymer content resulted in titania particles of diameter 15-20 nm.

Epidemiology and population genetics of Podosphaera fusca and Golovinomyces orontii, causal agents of cucurbit powdery mildew

In 2010, 2011 and 2012 growing seasons, the occurrence of the ascomycetes Podosphaera fusca and Golovinomyces orontii, causal agents of powdery mildew disease, was monitored on cultivated cucurbits located in Bologna and Mantua provinces to determine the epidemiology of the species. To identify the pathogens, both morphological and molecular identifications were performed on infected leaf samples and a Multiplex-PCR was performed to identify the mating type genes of P. fusca isolates. The investigations indicated a temporal succession of the two species with the earlier infections caused by G. orontii, that seems to be the predominant species till the middle of July when it progressively disappears and P. fusca becomes the main species infecting cucurbits till the end of October. The temporal variation is likely due to the different overwintering strategies of the two species instead of climatic conditions. Only chasmothecia of P. fusca were recorded and mating type alleles ratio tended to be 1:1. Considering that only chasmothecia of P. fusca were found, molecular-genetic analysis were carried out to find some evidence of recombination within this species by MLST and AFLP methods. Surprisingly, no variations were observed within isolates for the 8 MLST markers used. According to this result, AFLP analysis showed a high similarity within isolates, with SM similarity coefficient ranging between 0.91-1.00 and also, sequencing of 12 polymorphic bands revealed identity to some gene involved in mutation and selection. The results suggest that populations of P. fusca are likely to be a clonal population with some differences among isolates probably due to agricultural practices such as fungicides treatments and cultivated hosts. Therefore, asexual reproduction, producing a lot of fungal biomass that can be easily transported by wind, is the most common and useful way to the spread and colonization of the pathogen.

Phylogenie und Biogeographie der Linoideae (Linaceae) - Evolution von Heterostylie, Homostylie in Linum

Die Linaceae-Linoideae, vor allem die Gattung Linum, wurden unter Verwendung von zwei molekularen Markern (rbcL und ITS) bzgl. ihrer Phylogenie und Biogeographie untersucht. Die Linaceae entstanden während der mittleren Kreide in den frühen tropischen Regenwäldern, von wo aus sich die monophyletischen Linoideae vor etwa 51-46 Mill. Jahren über die temperaten Gebiete der Nordhemisphäre ausbreiteten. Während die drei basal abspaltenden Gattungen Anisadenia, Reinwardtia und Tirpitzia bzgl. ihrer Verbreitung auf Südostasien beschränkt sind, ist die Gattung Linum heute auf allen Kontinenten vertreten. Der Ursprung von Linum liegt wahrscheinlich in Südwestasien bzw. dem östlichen Mediterraneum, wo es im Oligozän zur Aufspaltung in zwei Entwicklungslinien kam ('Blaue Gruppe' und 'Gelbe Gruppe'). Während die überwiegend blaublühenden Linum-Arten ('Blaue Gruppe') vor allem in Europa und Südwestasien vorkommen, weisen die Vertreter der 'Gelben Gruppe' ein wesentlich größeres Verbreitungsgebiet auf. Gelbblühende Linum Arten findet man auf allen Kontinenten mit Diversitätszentren in Nordostamerika und Südwestasien. Interessanterweise wurde Amerika zweimal unabhängig voneinander besiedelt. Während die gelbblühenden Arten vor etwa 22-20 Mill. Jahren von Westeuropa über den Atlantik den amerikanischen Kontinent erreichten, wanderten Vertreter der 'Blauen Gruppe' im Pliozän (vor 3.78-3.33 Mill Jahren) über die Bering-Landbrücke in die Neue Welt ein. Auch in Südafrika sind einige gelbblühende Linum-Arten zu verzeichnen, die nicht über Nordafrika (wo einige Arten der 'Gelben Gruppe' beheimatet sind) die südliche Spitze des Kontinents erreichten, sondern von Amerika aus. Die molekularphylogenetischen Ergebnisse legen eine Eingliederung der Gattungen Cliococca, Hesperolinon, Radiola und Sclerolinon in Linum nahe, die durch morphologische Merkmale gestützt wird. Linopsis, die artenreichste Sektion der Gattung Linum, bedarf einiger Umstrukturierungen auf der Basis der molekularen und morphologischen Daten. Ein interessantes Phänomen innerhalb der Linaceae ist das Vorkommen von heterostylen und homostylen Arten innerhalb der Familie. Die Kombination der molekular-phylogenetischen Ergebnisse mit morphologischen Beobachtungen des Reproduktionssystems lassen darauf schließen, dass sich Homostylie innerhalb von Linum mehrfach unabhängig voneinander entwickelt hat. Das Modell von Primula wurde als Grundlage verwendet, um Aufschluss über die Entstehung der Homostylie innerhalb von Linum zu erlangen. Aus Primula ist bekannt, dass eine Kopplungsgruppe aus mindestens drei Genen an der Vererbung von Heterostylie beteiligt ist: G/g kodiert hierbei die Griffellänge und die Selbstinkompatibilitäts-reaktion der Narbe, A/a die Länge der Filamente und P/p die Selbst-inkompatibilitätsreaktion des Pollens. Umfangreiche Kreuzungs-experimente einer homostylen und einer heterostylen Linum-Art deuten darauf hin, dass die Genotypen der beiden Blütenformen in heterostylen Linum-Arten denen in Primula entsprechen. Langgriffel sind hiernach homozygot rezessiv (gpa/gpa), während die Kurzgriffel heterozygot sind (GPA/gpa). Selbstkompatible, homostyle Arten können theoretisch durch verschiedene Rekombinations-ereignisse entstehen. Erste Ergebnisse der rasterelektronen-mikroskopischen Betrachtung der Pollenkornoberflächen und Narbenpapillen deuten darauf hin, dass innerhalb von Linum Homostylie durch unterschiedliche Rekombinations-ereignisse mehrfach aus heterostylen Arten entstanden ist. So besitzt die homostyle Linum leonii den Genotyp gPA/gPA, während für die homostylen L. tenuifolium und L. nodiflorum der Genotyp Gpa/Gpa wahrscheinlich ist.

Nanoscopic studies of conjugated polymer blends by (electric) scanning probe microscopy

Conjugated polymers and conjugated polymer blends have attracted great interest due to their potential applications in biosensors and organic electronics. The sub-100 nm morphology of these materials is known to heavily influence their electromechanical properties and the performance of devices they are part of. Electromechanical properties include charge injection, transport, recombination, and trapping, the phase behavior and the mechanical robustness of polymers and blends. Electrical scanning probe microscopy techniques are ideal tools to measure simultaneously electric (conductivity and surface potential) and dielectric (dielectric constant) properties, surface morphology, and mechanical properties of thin films of conjugated polymers and their blends.rnIn this thesis, I first present a combined topography, Kelvin probe force microscopy (KPFM), and scanning conductive torsion mode microscopy (SCTMM) study on a gold/polystyrene model system. This system is a mimic for conjugated polymer blends where conductive domains (gold nanoparticles) are embedded in a non-conductive matrix (polystyrene film), like for polypyrrole:polystyrene sulfonate (PPy:PSS), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). I controlled the nanoscale morphology of the model by varying the distribution of gold nanoparticles in the polystyrene films. I studied the influence of different morphologies on the surface potential measured by KPFM and on the conductivity measured by SCTMM. By the knowledge I gained from analyzing the data of the model system I was able to predict the nanostructure of a homemade PPy:PSS blend.rnThe morphologic, electric, and dielectric properties of water based conjugated polymer blends, e.g. PPy:PSS or PEDOT:PSS, are known to be influenced by their water content. These properties also influence the macroscopic performance when the polymer blends are employed in a device. In the second part I therefore present an in situ humidity-dependence study on PPy:PSS films spin-coated and drop-coated on hydrophobic highly ordered pyrolytic graphite substrates by KPFM. I additionally used a particular KPFM mode that detects the second harmonic electrostatic force. With this, I obtained images of dielectric constants of samples. Upon increasing relative humidity, the surface morphology and composition of the films changed. I also observed that relative humidity affected thermally unannealed and annealed PPy:PSS films differently. rnThe conductivity of a conjugated polymer may change once it is embedded in a non-conductive matrix, like for PPy embedded in PSS. To measure the conductivity of single conjugated polymer particles, in the third part, I present a direct method based on microscopic four-point probes. I started with metal core-shell and metal bulk particles as models, and measured their conductivities. The study could be extended to measure conductivity of single PPy particles (core-shell and bulk) with a diameter of a few micrometers.

Charge transport properties of organic conjugated polymers for photovoltaic applications

Charge transport in conjugated polymers as well as in bulk-heterojunction (BHJ) solar cells made of blends between conjugated polymers, as electron-donors (D), and fullerenes, as electron-acceptors (A), has been investigated. It is shown how charge carrier mobility of a series of anthracene-containing poly(p-phenylene-ethynylene)-alt-poly(p-phenylene-vinylene)s (AnE-PVs) is highly dependent on the lateral chain of the polymers, on a moderate variation of the macromolecular parameters (molecular weight and polydispersity), and on the processing conditions of the films. For the first time, the good ambipolar transport properties of this relevant class of conjugated polymers have been demonstrated, consistent with the high delocalization of both the frontier molecular orbitals. Charge transport is one of the key parameters in the operation of BHJ solar cells and depends both on charge carrier mobility in pristine materials and on the nanoscale morphology of the D/A blend, as proved by the results here reported. A straight correlation between hole mobility in pristine AnE-PVs and the fill factor of the related solar cells has been found. The great impact of charge transport for the performance of BHJ solar cells is clearly demonstrated by the results obtained on BHJ solar cells made of neat-C70, instead of the common soluble fullerene derivatives (PCBM or PC70BM). The investigation of neat-C70 solar cells was motivated by the extremely low cost of non-functionalized fullerenes, compared with that of their soluble derivatives (about one-tenth). For these cells, an improper morphology of the blend leads to a deterioration of charge carrier mobility, which, in turn, increases charge carrier recombination. Thanks to the appropriate choice of the donor component, solar cells made of neat-C70 exhibiting an efficiency of 4.22% have been realized, with an efficiency loss of just 12% with respect to the counterpart made with costly PC70BM.

Photokathoden mit internem DBR-Reflektor als Quellen hochintensiver spinpolarisierter Elektronenstrahlen

Die Erzeugung von Elektronenstrahlen hoher Intensität (I$geq$2,mA) und hoher Spinpolarisation (P$geq$85%) ist für die Experimente an den geplanten glqq Linac Ringgrqq Electron--Ion--Collidern (z.B. eRHIC am Brookhaven National Laboratory) unabdingbar, stellt aber zugleich eine enorme Herausforderung dar. Die Photoemission aus ce{GaAs}--basierten Halbleitern wie z.B. den in dieser Arbeit untersuchten GaAlAs/InGaAlAs Quanten--Übergittern zeichnet sich zwar durch eine hohe Brillanz aus, die geringe Quantenausbeute von nur ca. 1% im Bereich maximaler Polarisation erfordert jedoch hohe Laserintensitäten von mehreren Watt pro $text{cm}^{2}$, was erhebliche thermische Probleme verursacht. rnrnIn dieser Arbeit konnte zunächst gezeigt werden, dass die Lebensdauer einer Photokathode mit steigender Laserleistung bzw. Temperatur exponentiell abnimmt. Durch Einbringen eines DBR--Spiegels zwischen die aktive Zone der Photokathode und ihr Substrat wird ein Großteil des ungenutzten Laserlichts wieder aus dem Kristall herausreflektiert und trägt somit nicht zur Erwärmung bei. Gleichzeitig bildet der Spiegel zusammen mit der Grenzfläche zum Vakuum eine Resonator--Struktur aus, die die aktive Zone umschließt. Dadurch kommt es für bestimmte Wellenlängen zu konstruktiver Interferenz und die Absorption in der aktiven Zone erhöht sich. Beide Effekte konnten durch vergleichenden Messungen an Kathoden mit und ohne DBR--Spiegel nachgewiesen werden. Dabei ergibt sich eine gute Übereinstimmung mit der Vorhersage eines Modells, das auf der dielektrischen Funktion der einzelnen Halbleiterstrukturen beruht. Von besonderer praktischer Bedeutung ist, dass die DBR--Kathode für einen gegebenen Photoemissions-strom eine um einen Faktor $geq$,3{,}5 kleinere Erwärmung aufweist. Dies gilt über den gesamten Wellenlängenbereich in dem die Kathode eine hohe Strahlpolarisation (P$>$80%) produzieren kann, auch im Bereich der Resonanz.rnAus zeitaufgelösten Messungen der Ladungsverteilung und Polarisation lassen sich sowohl Rückschlüsse über die Transportmechanismen im Inneren einer Kathode als auch über die Beschaffenheit ihrer Oberfläche ziehen. Im Rahmen dieser Dissertation konnte die Messgeschwindigkeit der verwendeten Apparatur durch den Einbau eines schnelleren Detektors und durch eine Automatisierung der Messprozedur entscheidend vergrößert und die resultierende Zeitauflösung mit jetzt 1{,}2 Pikosekunden annähernd verdoppelt werden.rnrnDie mit diesen Verbesserungen erhaltenen Ergebnisse zeigen, dass sich der Transport der Elektronen in Superlattice--Strukturen stark vom Transport in den bisher untersuchten Bulk--Kristallen unterscheidet. Der Charakter der Bewegung folgt nicht dem Diffusionsmodell, sondern gibt Hinweise auf lokalisierte Zustände, die nahe der Leitungsbandunterkante liegen und Elektronen für kurze Zeit einfangen können. Dadurch hat die Impulsantwort einer Kathode neben einem schnellen Abfall des Signals auch eine größere Zeitkonstante, die selbst nach 30,ps noch ein Signal in der Größenordnung von ca. 5textperthousand der Maximalintensität erzeugt.

Cellular localization and mechanism of amyloid precursor protein (APP) homodimer formation in an oxidizing environment

The amyloid precursor protein (APP) is a type I transmembrane glycoprotein, which resembles a cell surface receptor, comprising a large ectodomain, a single spanning transmembrane part and a short C-terminal, cytoplasmic domain. It belongs to a conserved gene family, with over 17 members, including also the two mammalian APP homologues proteins APLP1 and APLP2 („amyloid precursor like proteins“). APP is encoded by 19 exons, of which exons 7, 8, and 15 can be alternatively spliced to produce three major protein isoforms APP770, APP751 and APP695, reflecting the number of amino acids. The neuronal APP695 is the only isoform that lacks a Kunitz Protease Inhibitor (KPI) domain in its extracellular portion whereas the two larger, peripheral APP isoforms, contain the 57-amino-acid KPI insert. rnRecently, research effort has suggested that APP metabolism and function is thought to be influenced by homodimerization and that the oligomerization state of APP could also play a role in the pathology of Alzheimer's disease (AD), by regulating its processing and amyloid beta production. Several independent studies have shown that APP can form homodimers within the cell, driven by motifs present in the extracellular domain, as well as in the juxtamembrane (JM) and transmembrane (TM) regions of the molecule, whereby the exact molecular mechanism and the origin of dimer formation remains elusive. Therefore, we focused in our study on the actual subcellular origin of APP homodimerization within the cell, an underlying mechanism, and a possible impact on dimerization properties of its homologue APLP1. Furthermore, we analyzed homodimerization of various APP isoforms, in particular APP695, APP751 and APP770, which differ in the presence of a Kunitz-type protease inhibitor domain (KPI) in the extracellular region. In order to assess the cellular origin of dimerization under different cellular conditions, we established a mammalian cell culture model-system in CHO-K1 (chinese hamster ovary) cells, stably overexpressing human APP, harboring dilysine based organelle sorting motifs at the very C-terminus [KKAA-Endoplasmic Reticulum (ER); KKFF-Golgi]. In this study we show that APP exists as disulfide-bound, SDS-stable dimers, when it was retained in the ER, unlike when it progressed further to the cis-Golgi, due to the KKFF ER exit determinant. These stable APP complexes were isolated from cells, and analyzed by SDS–polyacrylamide gel electrophoresis under non-reducing conditions, whereas strong denaturing and reducing conditions completely converted those dimers to monomers. Our findings suggested that APP homodimer formation starts early in the secretory pathway and that the unique oxidizing environment of the ER likely promotes intermolecular disulfide bond formation between APP molecules. We particularly visualized APP dimerization employing a variety of biochemical experiments and investigated the origin of its generation by using a Bimolecular Fluorescence Complementation (BiFC) approach with split GFP-APP chimeras. Moreover, using N-terminal deletion constructs, we demonstrate that intermolecular disulfide linkage between cysteine residues, exclusively located in the extracellular E1 domain, represents another mechanism of how an APP sub-fraction can dimerize within the cell. Additionally, mutational studies revealed that cysteines at positions 98 and 105, embedded in the conserved loop region within the E1 domain, are critical for interchain disulfide bond formation. Using a pharmacological treatment approach, we show that once generated in the oxidative environment of the ER, APP dimers remain stably associated during transport, reaching the plasma membrane. In addition, we demonstrate that APP isoforms, encompassing the KPI domain, exhibit a strongly reduced ability to form cis-directed dimers in the ER, whereas trans-directed cell aggregation of Drosophila Schneider (S2)-cells was isoform independent, mediating cell-cell contacts. Thus, suggesting that steric properties of KPI-APP might be the cause for weaker cis-interaction in the ER, compared to APP695. Finally, we provide evidence that APP/APLP1 heterointeractions are likewise initiated in the ER, suggesting a similar mechanism for heterodimerization. Therefore, dynamic alterations of APP between monomeric, homodimeric, and possibly heterodimeric status could at least partially explain some of the variety in the physiological functions of APP.rn

Application of a hybrid blocking layer in dye-sensitized solar cells

In dye-sensitized solar cells a blocking layer between the transparent electrode and the mesoporous titanium dioxide film is used to prevent short-circuits between the hole-conductor and the front electrode. The conventional approach is to use a compact layer of titanium dioxide prepared by spin coating or spray pyrolysis. The thickness of the blocking layer is critical. On one hand, the layer has to be thick enough to cover the rough substrate completely. On the other hand, the serial resistance increases with increasing film thickness, because the layer acts as an ohmic resistance itself. In this thesis an amphiphilic diblock copolymer is used as a functional template to produce an alternative, hybrid blocking layer. The hybrid blocking layer is thinner than the conventional, compact titanium dioxide film and thereby possesses a higher conductivity. Still, this type of blocking layer covers the rough electrode material completely and avoids current loss through charge recombination. The novel blocking layer is prepared using a tailored, amphiphilic block copolymer in combination with sol-gel chemistry. While the hydrophilic poly(ethylene oxide) part of the polymer coordinates a titanium dioxide precursor to form a percolating network of titania particles, the hydrophobic poly(dimethylsiloxane) part turns into an insulating ceramic layer. With this technique, crack-free films with a thickness down to 24 nm are obtained. The presence of a conductive titanium dioxide network for current flow, which is embedded in an insulating ceramic material, is validated by conductive scanning force microscopy. This is the first time that such a hybrid blocking layer is implemented in a solar cell. With this approach the efficiency could be increased up to 27 % compared to the conventional blocking layer. Thus, it is demonstrated that the hybrid blocking layer represents a competitive alternative to the classical approach.

Charge-transport simulations in organic semiconductors

In this thesis we have extended the methods for microscopic charge-transport simulations for organic semiconductors. In these materials the weak intermolecular interactions lead to spatially localized charge carriers, and the charge transport occurs as an activated hopping process between diabatic states. In addition to weak electronic couplings between these states, different electrostatic environments in the organic material lead to a broadening of the density of states for the charge energies which limits carrier mobilities.rnThe contributions to the method development includern(i) the derivation of a bimolecular charge-transfer rate,rn(ii) the efficient evaluation of intermolecular (outer-sphere) reorganization energies,rn(iii) the investigation of effects of conformational disorder on intramolecular reorganization energies or internal site energiesrnand (iv) the inclusion of self-consistent polarization interactions for calculation of charge energies.These methods were applied to study charge transport in amorphous phases of small molecules used in the emission layer of organic light emitting diodes (OLED).rnWhen bulky substituents are attached to an aromatic core in order to adjust energy levels or prevent crystallization, a small amount of delocalization of the frontier orbital to the substituents can increase electronic couplings between neighboring molecules. This leads to improved charge-transfer rates and, hence, larger charge-mobility. We therefore suggest using the mesomeric effect (as opposed to the inductive effect) when attaching substituents to aromatic cores, which is necessary for example in deep blue OLEDs, where the energy levels of a host molecule have to be adjusted to those of the emitter.rnFurthermore, the energy landscape for charges in an amorphous phase cannot be predicted by mesoscopic models because they approximate the realistic morphology by a lattice and represent molecular charge distributions in a multipole expansion. The microscopic approach shows that a polarization-induced stabilization of a molecule in its charged and neutral states can lead to large shifts, broadening, and traps in the distribution of charge energies. These results are especially important for multi-component systems (the emission layer of an OLED or the donor-acceptor interface of an organic solar cell), if the change in polarizability upon charging (or excitation in case of energy transport) is different for the components. Thus, the polarizability change upon charging or excitation should be added to the set of molecular parameters essential for understanding charge and energy transport in organic semiconductors.rnWe also studied charge transport in self-assembled systems, where intermolecular packing motives induced by side chains can increase electronic couplings between molecules. This leads to larger charge mobility, which is essential to improve devices such as organic field effect transistors, where low carrier mobilities limit the switching frequency.rnHowever, it is not sufficient to match the average local molecular order induced by the sidernchains (such as the pitch angle between consecutive molecules in a discotic mesophase) with maxima of the electronic couplings.rnIt is also important to make the corresponding distributions as narrow as possible compared to the window determined by the closest minima of thernelectronic couplings. This is especially important in one-dimensional systems, where charge transport is limited by the smallest electronic couplings.rnThe immediate implication for compound design is that the side chains should assist the self-assemblingrnprocess not only via soft entropic interactions, but also via stronger specific interactions, such as hydrogen bonding.rnrnrnrn

Production of antihydrogen via double charge exchange

Spectroscopy of the 1S-2S transition of antihydrogen confined in a neutral atom trap and comparison with the equivalent spectral line in hydrogen will provide an accurate test of CPT symmetry and the first one in a mixed baryon-lepton system. Also, with neutral antihydrogen atoms, the gravitational interaction between matter and antimatter can be tested unperturbed by the much stronger Coulomb forces.rnAntihydrogen is regularly produced at CERN's Antiproton Decelerator by three-body-recombination (TBR) of one antiproton and two positrons. The method requires injecting antiprotons into a cloud of positrons, which raises the average temperature of the antihydrogen atoms produced way above the typical 0.5 K trap depths of neutral atom traps. Therefore only very few antihydrogen atoms can be confined at a time. Precision measurements, like laser spectroscopy, will greatly benefit from larger numbers of simultaneously trapped antihydrogen atoms.rnTherefore, the ATRAP collaboration developed a different production method that has the potential to create much larger numbers of cold, trappable antihydrogen atoms. Positrons and antiprotons are stored and cooled in a Penning trap in close proximity. Laser excited cesium atoms collide with the positrons, forming Rydberg positronium, a bound state of an electron and a positron. The positronium atoms are no longer confined by the electric potentials of the Penning trap and some drift into the neighboring cloud of antiprotons where, in a second charge exchange collision, they form antihydrogen. The antiprotons remain at rest during the entire process, so much larger numbers of trappable antihydrogen atoms can be produced. Laser excitation is necessary to increase the efficiency of the process since the cross sections for charge-exchange collisions scale with the fourth power of the principal quantum number n.rnThis method, named double charge-exchange, was demonstrated by ATRAP in 2004. Since then, ATRAP constructed a new combined Penning Ioffe trap and a new laser system. The goal of this thesis was to implement the double charge-exchange method in this new apparatus and increase the number of antihydrogen atoms produced.rnCompared to our previous experiment, we could raise the numbers of positronium and antihydrogen atoms produced by two orders of magnitude. Most of this gain is due to the larger positron and antiproton plasmas available by now, but we could also achieve significant improvements in the efficiencies of the individual steps. We therefore showed that the double charge-exchange can produce comparable numbers of antihydrogen as the TBR method, but the fraction of cold, trappable atoms is expected to be much higher. Therefore this work is an important step towards precision measurements with trapped antihydrogen atoms.