Energy and delay trade-off of the GTS allocation mechanism in IEEE 802.15.4 for wireless sensor networks

The IEEE 802.15.4 protocol proposes a flexible communication solution for Low-Rate Wireless Personal Area Networks (LR-WPAN) including wireless sensor networks (WSNs). It presents the advantage to fit different requirements of potential applications by adequately setting its parameters. When in beaconenabled mode, the protocol can provide timeliness guarantees by using its Guaranteed Time Slot (GTS) mechanism. However, power-efficiency and timeliness guarantees are often two antagonistic requirements in wireless sensor networks. The purpose of this paper is to analyze and propose a methodology for setting the relevant parameters of IEEE 802.15.4-compliant WSNs that takes into account a proper trade-off between power-efficiency and delay bound guarantees. First, we propose two accurate models of service curves for a GTS allocation as a function of the IEEE 802.15.4 parameters, using Network Calculus formalism. We then evaluate the delay bound guaranteed by a GTS allocation and express it as a function of the duty cycle. Based on the relation between the delay requirement and the duty cycle, we propose a power-efficient superframe selection method that simultaneously reduces power consumption and enables meeting the delay requirements of real-time flows allocating GTSs. The results of this work may pave the way for a powerefficient management of the GTS mechanism in an IEEE 802.15.4 cluster.

Hospitalization flow in the public and private systems in the state of Sao Paulo, Brazil

OBJECTIVE To describe the migration flows of demand for public and private hospital care among the health regions of the state of Sao Paulo, Brazil. METHODS Study based on a database of hospitalizations in the public and private systems of the state of Sao Paulo, Southeastern Brazil, in 2006. We analyzed data from 17 health regions of the state, considering people hospitalized in their own health region and those who migrated outwards (emigration) or came from other regions (immigration). The index of migration effectiveness of patients from both systems was estimated. The coverage (hospitalization coefficient) was analyzed in relation to the number of inpatient beds per population and the indexes of migration effectiveness. RESULTS The index of migration effectiveness applied to the hospital care demand flow allowed characterizing health regions with flow balance, with high emigration of public and private patients, and with high attraction of public and private patients. CONCLUSIONS There are differences in hospital care access and opportunities among health regions in the state of Sao Paulo, Brazil.

Palaeomagnetic study of a subaerial volcanic ridge (São Jorge Island, Azores) for the cobb mountain subhron, volcano flank instability and tectonomagmatic implications

We present a palaeomagnetic study on 38 lava flows and 20 dykes encompassing the past 1.3 Myr on S. Jorge Island (Azores ArchipelagoNorth Atlantic Ocean). The sections sampled in the southeastern and central/western parts of the island record reversed and normal polarities, respectively. They indicate a mean palaeomagnetic pole (81.3 degrees N, 160.7 degrees E, K= 33 and A95= 3.4 degrees) with a latitude shallower than that expected from Geocentric Axial Dipole assumption, suggesting an effect of non-dipolar components of the Earth magnetic field. Virtual Geomagnetic Poles of eight flows and two dykes closely follow the contemporaneous records of the Cobb Mountain Subchron (ODP/DSDP programs) and constrain the age transition from reversed to normal polarity at ca. 1.207 +/- 0.017 Ma. Volcano flank instabilities, probably related to dyke emplacement along an NNWSSE direction, led to southwestward tilting of the lava pile towards the sea. Two spatially and temporally distinct dyke systems have been recognized on the island. The eastern is dominated by NNWSSE trending dykes emplaced before the end of the Matuyama Chron, whereas in the central/western parts the eruptive fissures oriented WNWESE controlled the westward growth of the S. Jorge Island during the Brunhes Chron. Both directions are consistent with the present-day regional stress conditions deduced from plate kinematics and tectonomorphology and suggest the emplacement of dykes along pre-existing fractures. The distinct timing and location of each dyke system likely results from a slight shift of the magmatic source.

Reconstructing the architectural evolution of volcanic islands from combined K/AR, morphologic, tectonic, and magnetic data. The Faial Island exemple (Azores)

The morpho-structural evolution of oceanic islands results from competition between volcano growth and partial destruction by mass-wasting processes. We present here a multi-disciplinary study of the successive stages of development of Faial (Azores) during the last 1 Myr. Using high-resolution digital elevation model (DEM), and new K/Ar, tectonic, and magnetic data, we reconstruct the rapidly evolving topography at successive stages, in response to complex interactions between volcanic construction and mass wasting, including the development of a graben. We show that: (1) sub-aerial evolution of the island first involved the rapid growth of a large elongated volcano at ca. 0.85 Ma, followed by its partial destruction over half a million years; (2) beginning about 360 ka a new small edifice grew on the NE of the island, and was subsequently cut by normal faults responsible for initiation of the graben; (3) after an apparent pause of ca. 250 kyr, the large Central Volcano (CV) developed on the western side of the island at ca 120 ka, accumulating a thick pile of lava flows in less than 20 kyr, which were partly channelized within the graben; (4) the period between 120 ka and 40 ka is marked by widespread deformation at the island scale, including westward propagation of faulting and associated erosion of the graben walls, which produced sedimentary deposits; subsequent growth of the CV at 40 ka was then constrained within the graben, with lava flowing onto the sediments up to the eastern shore; (5) the island evolution during the Holocene involves basaltic volcanic activity along the main southern faults and pyroclastic eruptions associated with the formation of a caldera volcano-tectonic depression. We conclude that the whole evolution of Faial Island has been characterized by successive short volcanic pulses probably controlled by brief episodes of regional deformation. Each pulse has been separated by considerable periods of volcanic inactivity during which the Faial graben gradually developed. We propose that the volume loss associated with sudden magma extraction from a shallow reservoir in different episodes triggered incremental downward graben movement, as observed historically, when immediate vertical collapse of up to 2 m was observed along the western segments of the graben at the end of the Capelinhos eruptive crises (1957-58).

Melhoria do processo produtivo

A dissertação descreve o levantamento e otimização do processo de fabrico de uma peça plástica para um automóvel. A otimização deste processo produtivo tem em vista a rentabilização de recursos humanos, a redução de custos associados e a redução de atividades ao longo do processo, tais como armazenamento de produto semiacabado, uma vez que este deixa de existir, a eliminação de fluxos logísticos e a eliminação do posto de montagem de componentes desta peça. A metodologia utilizada neste projeto centra-se na aplicação de ferramentas que permitem a análise e melhoria de processos produtivos, tais como o diagrama de processo, o diagrama spaghetti, o PDCA, a cronometragem dos tempos por tarefa e a aplicação de uma heurística para o balanceamento do futuro posto de trabalho da peça em estudo. O diagrama de processo, o diagrama de spaghetti e a cronometragem dos tempos por tarefas mostraram o estado atual do processo produtivo. Da análise do atual estado verifica-se que existe muito desperdício de mão-de-obra nas duas estações de trabalho, injeção e montagem. A eliminação do posto de trabalho exclusivo para montagem e junção dos processos de injeção e montagem no mesmo posto de trabalho, com a aplicação de uma heurística para balanceamento do novo posto de trabalho, demonstra que os ganhos são muito significativos. A aplicação do ciclo PDCA, na base da qual está a elaboração de um plano de ações, tornará esta mudança possível e bem-sucedida. A intenção deste projeto é demonstrar que o estado atual pode sempre ser melhorado se se usarem as ferramentas corretas para análise e proposta de melhorias que trarão ganhos à empresa a curto prazo. Usando esta sugestão, a empresa poderá dar início a um novo ciclo em que o espírito de melhoria esteja presente todos os dias em toda a organização.

Avaliação da dispneia e padrões ventílatórios num grupo de doentes com limitação crónica do débito aéreo candidatos a um programa de reabilitação

Revista Portuguesa de Pneumologia 1995; 1:p. 119-127.

Caracterização do desempenho das redes rodoviárias com base em modelos de afetação de tráfego: aplicação à Rede Rodoviária Nacional

Relatório de estágio para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Vias de Comunicação e Transportes

Otimização de uma cadeia de logística interna

Atualmente qualquer organização que se queira manter no ativo, tem que obrigatoriamente inovar, reduzir o desperdício associado ao processo produtivo e simultaneamente simplificar as tarefas diárias dos seus colaboradores. E é sobre estes princípios que este trabalho é baseado, ou seja, pretende-se através da aplicação de ferramentas Lean, a melhoria contínua do processo de produção da Schmitt Elevadores. Numa fase inicial foi necessário um estudo dos diferentes fluxos de materiais, que permitiu a conceção do VSM (Value Stream Mapping). O VSM juntamente com o diagrama de Spaghetti permitiram a identificação de algumas das fontes de desperdício, relacionadas essencialmente com o excesso de movimentações. Considerando o âmbito do estágio, logística interna, e reunidas as causas de desperdício verificadas nesta área, procedeu-se à criação de um ciclo de entrega de materiais, por parte do operador logístico, baseado no conceito de milk run. Verificaram-se também problemas ao nível da gestão de stocks, pelo que também foi necessária intervenção nesta área. A aplicação das medidas mencionadas anteriormente irá traduzir-se em ganhos para o processo produtivo, nomeadamente, na criação de rotinas para os operadores logísticos; evitar deslocações por parte dos operadores de cada processo e manter em supermercado a quantidade suficiente de cada artigo, para fazer face à variabilidade da procura.

Lean na gestão de fluxos logísticos da Dorel Portugal, Lda.

O presente trabalho debruça-se sobre a análise de fluxos de informação e materiais na empresa Dorel Portugal, Lda.. Mais concretamente, são analisados os fluxos de transmissão de informação e os fluxos de movimentação de materiais nos duais fornecedores/armazém e armazém/setor de montagem. O estudo referido terá como propósito a identificação de elementos, associados ao estado atual, passíveis e/ou carentes de melhoria. Identificados e nomeados os pontos de intervenção, desenvolvem-se propostas de solução, as quais assentam predominantemente nos princípios e ferramentas que se associam à filosofia Lean. A escolha desta filosofia, para fundamentação de propostas, prende-se com o facto de a mesma assentar numa lógica de criação de valor pela melhoria de processo, o que espelha bem a intensão subjacente a este exercício. Foram implementadas as sugestões apresentadas e validadas junto da entidade alvo de estudo. No seguimento das implementações realizadas foi executada uma análise que permite enaltecer o ganho, seja de forma quantitativa ou qualitativa, a fim de criar impacto e sensibilizar para a importância das ações executadas. Para finalizar, importa demarcar a criação de um plano de controlo, contemplado nas ações levadas a cabo, o qual é direcionado para a manutenção do processo e concretização de medidas de melhoria contínua.

Project, modelling and simulation of air stripping columns for the treatment of groundwater contaminated with volatile organic compounds

Volatile organic compounds are a common source of groundwater contamination that can be easily removed by air stripping in columns with random packing and using a counter-current flow between the phases. This work proposes a new methodology for the column design for any particular type of packing and contaminant avoiding the necessity of a pre-defined diameter used in the classical approach. It also renders unnecessary the employment of the graphical Eckert generalized correlation for pressure drop estimates. The hydraulic features are previously chosen as a project criterion and only afterwards the mass transfer phenomena are incorporated, in opposition to conventional approach. The design procedure was translated into a convenient algorithm using C++ as programming language. A column was built in order to test the models used either in the design or in the simulation of the column performance. The experiments were fulfilled using a solution of chloroform in distilled water. Another model was built to simulate the operational performance of the column, both in steady state and in transient conditions. It consists in a system of two partial non linear differential equations (distributed parameters). Nevertheless, when flows are steady, the system became linear, although there is not an evident solution in analytical terms. In steady state the resulting system of ODE can be solved, allowing for the calculation of the concentration profile in both phases inside the column. In transient state the system of PDE was numerically solved by finite differences, after a previous linearization.

A New Approach in the Design of Air Stripping Columns for the Treatment of Groundwater Contaminated With Volatile Organic Compounds

Volatile organic compounds are a common source of groundwater contamination that can be easily removed by air stripping in columns with random packing and using a counter-current flow between the phases. This work proposes a new methodology for column design for any type of packing and contaminant which avoids the necessity of an arbitrary chosen diameter. It also avoids the employment of the usual graphical Eckert correlations for pressure drop. The hydraulic features are previously chosen as a project criterion. The design procedure was translated into a convenient algorithm in C++ language. A column was built in order to test the design, the theoretical steady-state and dynamic behaviour. The experiments were conducted using a solution of chloroform in distilled water. The results allowed for a correction in the theoretical global mass transfer coefficient previously estimated by the Onda correlations, which depend on several parameters that are not easy to control in experiments. For best describe the column behaviour in stationary and dynamic conditions, an original mathematical model was developed. It consists in a system of two partial non linear differential equations (distributed parameters). Nevertheless, when flows are steady, the system became linear, although there is not an evident solution in analytical terms. In steady state the resulting ODE can be solved by analytical methods, and in dynamic state the discretization of the PDE by finite differences allows for the overcoming of this difficulty. To estimate the contaminant concentrations in both phases in the column, a numerical algorithm was used. The high number of resulting algebraic equations and the impossibility of generating a recursive procedure did not allow the construction of a generalized programme. But an iterative procedure developed in an electronic worksheet allowed for the simulation. The solution is stable only for similar discretizations values. If different values for time/space discretization parameters are used, the solution easily becomes unstable. The system dynamic behaviour was simulated for the common liquid phase perturbations: step, impulse, rectangular pulse and sinusoidal. The final results do not configure strange or non-predictable behaviours.

Microteatro : o teatro rápido : dissertação

Dissertação submetida à Escola Superior de Teatro e Cinema para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Teatro - especialização em Artes Performativas

Gestão de stocks e armazém de matérias-primas

Relatório de Estágio apresentado ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Logística Orientadores do Instituto: Professor Doutor Luís Barreto e Mestre Jonas Lima Orientador da empresa: Engenheiro Vítor Carvalho

O Impacto do investimento direto estrangeiro no crescimento económico de Angola

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto, para a obtenção do Grau de Mestre em Empreendedorismo e Internacionalização Orientação: Prof. Doutora Maria Clara Dias Pinto Ribeiro Prof. Doutora Celsa Maria Carvalho Machado

Management Driven Hybrid Multicast Framework for Content Aware Networks

The need for better adaptation of networks to transported flows has led to research on new approaches such as content aware networks and network aware applications. In parallel, recent developments of multimedia and content oriented services and applications such as IPTV, video streaming, video on demand, and Internet TV reinforced interest in multicast technologies. IP multicast has not been widely deployed due to interdomain and QoS support problems; therefore, alternative solutions have been investigated. This article proposes a management driven hybrid multicast solution that is multi-domain and media oriented, and combines overlay multicast, IP multicast, and P2P. The architecture is developed in a content aware network and network aware application environment, based on light network virtualization. The multicast trees can be seen as parallel virtual content aware networks, spanning a single or multiple IP domains, customized to the type of content to be transported while fulfilling the quality of service requirements of the service provider.