Kehittyneiden ydinpolttoainekiertojen ympäristövaikutusten ja taloudellisuuden arviointia

Kaikkein yleisin käytössä oleva ydinpolttoainekierto on nykyisin avoin, jossa käytetty ydinpolttoaine loppusijoitetaan suoraan ilman jälleenkäsittelyä. Nykyisin kehitteillä olevat uuden sukupolven ydinreaktorit ovat kuitenkin pääosin suunniteltu osittain tai kokonaan suljetuille ydinpolttoainekierroille, jossa käytetty polttoaine jälleenkäsitellään ja osa materiaaleista kierrätetään. Tämän työn tavoitteena oli arvioida näitä kehittyneitä ydinpolttoainekiertoja ympäristövaikutusten ja taloudellisuuden suhteen. Työn yleisluonteista vertailua varten valittiin neljä erilaista kehittynyttä polttoainekiertoskenaariota, joita verrattiin avoimeen polttoainekiertoon erilaisten parametrien avulla. Parametreinä käytettiin muun muassa uraanin kulutusta, loppusijoitettavan jätteen määrää, aktiivisuutta ja lämmöntuottoa sekä käytönaikaisten radioaktiivisten päästöjen määrää. Yleislounteisen arvioinnin lisäksi työssä tarkasteltiin polttoainekiertoa myös Suomen näkökulmasta. Nykyistä polttoainekiertoa verrattiin kahteen erilaiseen tulevaisuuden versioon. Kestävän kehityksen osalta kehittyneet polttoainekierrot vähensivät ympäristövaikutusten määrää avoimeen polttoainekiertoon verrattuna. Kehittyneiden polttoainekiertojen kustannukset olivat avoimen polttoainekierron kustannuksia suuremmat. Kokonaiskustannuksissa ero oli kaikilla vertailuskenaarioilla alle 20 %, mutta polttoainekiertokustannuksissa kustannusten kasvu oli välillä 27-45 % riippuen skenaariosta. Suomen tapauksessa tulokset olivat hyvin samankaltaisia. Uraanin kulutus ja loppusijoitettavan jätteen määrä väheni kehittyneempien polttoainekiertojen johdosta. Polttoainekiertokustannukset nousivat noin puolitoistakertaisiksi, mutta vaikutus kokonaiskustannuksiin oli vain noin 10 %. Johtopäätöksenä voidaan todeta, ettäydinpolttoainekierron ympäristövaikutuksia on mahdollista vähentää osittain tai kokonaan suljettujen polttoainekiertojen avulla. Vaikka polttoainekierron kustannukset kasvavat, niiden vaikutus ydinsähkön kokonaiskustannuksiin ei ole niin merkittävä.

Potential of the Osteoclast’s Proton Pump as a Drug Target in Osteoporosis

Decreasing bone mass during aging predisposes to fractures and it is estimated that every second woman and one in five men will suffer osteoporotic fractures during their lifetime. Bone is an adaptive tissue undergoing continuous remodeling in response to physical and metabolic stimuli. Bone mass decreases through a net negative balance in the bone remodeling process of bone, in which the new bone incompletely replaces the resorbed bone mass. Bone resorption is carried out by the osteoclasts; the bone mineral is solubilized by acidification and the organic matrix is subsequently degraded by proteases. Several classes of drugs are available for prevention of osteoporotic fractures. They act by different mechanisms to increase bone mass, and some of them act mainly as antiresorptives by inhibition of osteoclast formation or their function. Optimally, a drug should act selectively on a specific process, since other processes affected usually result in adverse effects. The purpose of this study was to evaluate whether the osteoclastic vacuolar adenosine trisphosphatases (V-ATPase), which drives the solubilization of bone mineral, can be selectively inhibited despite its ubiquitous cellular functions. The V-ATPase is a multimeric protein composed of 13 subunits of which six possesses two or more isoforms. Selectivity for the osteoclastic V-ATPase could be provided if it has some structural uniqueness, such as a unique isoform combination. The a3 isoform of the 116kDa subunit is inevitable for bone resorption; however, it is also present in, and mainly limited to, the lysosomes of other cells. No evidence of a structural uniqueness of the osteoclastic V-ATPase compared to the lysosomal V-ATPase was found, although this can not yet be excluded. Thus, an inhibitor selective for the a3 isoform would target the lysosomal V-ATPase as well. However, the results suggest that selectivity for bone resorption over lysosomal function can be obtained by two other mechanisms, suggesting that isoform a3 is a valid target. The first is differential compensation; bone resorption depends on the high level of a3 expression, and is not compensated for by other isoforms, while the lower level of a3 in lysosomes of other cells may be partly compensated for. The second mechanism is because the bone resorption process itself is fundamentally different from lysosomal acidification because of the chemistry of bone dissolution and the anatomy of the resorbing osteoclast. By this mechanism, full inhibition of bone resorption is obtained with more than tenfold lower inhibitor concentration than those needed to fully inhibit lysosomal acidification. The two mechanisms are additive. Based on the results, we suggest that bone resorption can be selectively inhibited if VATPase inhibitors that are sufficiently selective for the a3 isoform over the other isoforms are developed.

Methods for construction and analysis of computational models in systems biology : applications to the modelling of the heat shock response and the self-assembly of intermediate filaments

Systems biology is a new, emerging and rapidly developing, multidisciplinary research field that aims to study biochemical and biological systems from a holistic perspective, with the goal of providing a comprehensive, system- level understanding of cellular behaviour. In this way, it addresses one of the greatest challenges faced by contemporary biology, which is to compre- hend the function of complex biological systems. Systems biology combines various methods that originate from scientific disciplines such as molecu- lar biology, chemistry, engineering sciences, mathematics, computer science and systems theory. Systems biology, unlike “traditional” biology, focuses on high-level concepts such as: network, component, robustness, efficiency, control, regulation, hierarchical design, synchronization, concurrency, and many others. The very terminology of systems biology is “foreign” to “tra- ditional” biology, marks its drastic shift in the research paradigm and it indicates close linkage of systems biology to computer science. One of the basic tools utilized in systems biology is the mathematical modelling of life processes tightly linked to experimental practice. The stud- ies contained in this thesis revolve around a number of challenges commonly encountered in the computational modelling in systems biology. The re- search comprises of the development and application of a broad range of methods originating in the fields of computer science and mathematics for construction and analysis of computational models in systems biology. In particular, the performed research is setup in the context of two biolog- ical phenomena chosen as modelling case studies: 1) the eukaryotic heat shock response and 2) the in vitro self-assembly of intermediate filaments, one of the main constituents of the cytoskeleton. The range of presented approaches spans from heuristic, through numerical and statistical to ana- lytical methods applied in the effort to formally describe and analyse the two biological processes. We notice however, that although applied to cer- tain case studies, the presented methods are not limited to them and can be utilized in the analysis of other biological mechanisms as well as com- plex systems in general. The full range of developed and applied modelling techniques as well as model analysis methodologies constitutes a rich mod- elling framework. Moreover, the presentation of the developed methods, their application to the two case studies and the discussions concerning their potentials and limitations point to the difficulties and challenges one encounters in computational modelling of biological systems. The problems of model identifiability, model comparison, model refinement, model inte- gration and extension, choice of the proper modelling framework and level of abstraction, or the choice of the proper scope of the model run through this thesis.

”Jos tietää, mitä haluaa.” Seurantatutkimus lukio-opiskelijoiden itsesäätelystä, opiskelun kulusta ja odotusten toteutumisesta

Tutkimuksen päätarkoituksena on selvittää lukio-opiskelijoiden käsityksiä oppimisensa itsesäätelystrategioista. Lukiokoulutuksessa toteutetut muutokset kuten valinnanmahdollisuuksien lisääntyminen ovat antaneet lukio-opiskelijoille kasvaneen mahdollisuuden omanlaisensa lukio-opiskelupolun suunnitteluun ja yksilölliseen tavoitteenasetteluun. Työssä tarkastellaan myös lukio-opiskelijoiden opintojen kulkua, erilaisia opiskeluodotuksia ja niiden toteutumista sekä näiden yhteyttä itsesäätelyyn. Tutkimus toteutettiin seurantatutkimuksena, jossa kyselylomakkeilla kerättiin tietoa syksyllä 2004 Turun kaupungin suomenkielisissä päivälukioissa (10 koulua) opintonsa aloittavilta opiskelijoilta kahdesti; ensimmäisenä ja kolmantena opiskeluvuotena. Tutkimuksessa oli mukana 245 opiskelijaa, 142 tyttöä ja 103 poikaa. Tutkimuksen vastausprosentti oli 84 %. Kyselylomakkeiden itsesäätelyä ja oppimisorientaatioita koskevat kysymykset pohjautuivat Jan Vermuntin ILS-oppimistyylimittariin (Inventory of Learning Styles) (Vermunt 1994; 1996). Lisäksi haastateltiin 15 tutkimuksessa mukana ollutta opiskelijaa. Kyselylomakeaineisto analysoitiin ristiintaulukoinneilla, korrelaatiokertoimilla, t-testeillä ja erilaisilla varianssianalyyseillä. Itsesäätelystrategiamittarin neljän summamuuttujan oletus testattiin erikseen mittauksissa 1 ja 2 konfirmatorisen faktorianalyysin avulla. Tutkimuksessa identifioitiin klusterianalyysillä tehdyssä ryhmittelyssä neljä erilaista lukio-opiskelijaryhmää: menestyvät navigoijat, tavalliset tasapainoilijat, säätelemättömät kulkeutujat ja ylikuormittuneet avuntarvitsijat. Navigoijille on tyypillistä niin prosessin/ tulosten kuin sisällön suhteen korkea itsesäätely. Tyypillinen piirre navigoijien kohdalla on myös ulkoisen säätelyn korkea taso. Avuntarvitsijat eroavat muista ryhmistä selkeästi korkeampien puutteellisten säätelystrategioidensa perusteella, vaikka heidän itsesäätelynsä on suhteellisesti niihin ja muihin ryhmiin nähden melko korkealla tasolla. Tasapainoilijat sijoittuvat itsesäätelyn ja ulkoisen säätelyn osalta ryhmien keskitasolle. Kulkeutujien itsesäätely samoin kuin ulkoinen säätely ovat ryhmien matalinta tasoa. Tuloksista nähdään, että kehittyneemmällä itsesäätelyllä on selvä yhteys lukio-opintojen sujuvuuteen ja opintomenestykseen, mutta noin kolmasosalle opiskelijoista itsesäätelevä, suunnitelmallinen tavoitteenasettelu on vaikeaa. Navigoijilla ja tasapainoilijoilla opiskelu on sekä heille itselleen mielekästä että ulkoisesti arvioituna tehokasta. Joidenkin opiskelijoiden erityisesti avuntarvitsijoiden ja kulkeutujien keskuudessa opintojen kulku sen sijaan hapuilee. Lukiolaisten opiskeluun kohdistuvien odotusten voidaan tämän tutkimuksen tuloksen perusteella katsoa ennustavan todellista opintojen kulkua ja opintomenestystä melko hyvin. Eroja on sekä tavoitetasossa, opiskeluprosessiin liittyvissä kokemuksissa että jatko-opintosuunnitelmissa ja ne ovat yhteydessä sukupuoleen, isän sosioekonomiseen asemaan, erikoislinjalla opiskeluun sekä lukion alun itsesäätelyryhmiin.

Exiles and Constituents: Baltic Refugees and American Cold War Politics, 1948- 1960

This dissertation explores the complicated relations between Estonian, Latvian, and Lithuanian postwar refugees and American foreign policymakers between 1948 and 1960. There were seemingly shared interests between the parties during the first decade of the Cold War. Generally, Eastern European refugees refused to recognize Soviet hegemony in their homelands, and American policy towards the Soviet bloc during the Truman and Eisenhower administrations sought to undermine the Kremlin’s standing in the region. More specifically, Baltic refugees and State Department officials sought to preserve the 1940 non-recognition policy towards the Soviet annexation of the Baltic States. I propose that despite the seemingly natural convergence of interests, the American experiment of constructing a State-Private network revolving around fostering relations with exile groups was fraught with difficulties. These difficulties ultimately undermined any ability that the United States might have had to liberate the Baltic States from the Soviet Union. As this dissertation demonstrates, Baltic exiles were primarily concerned with preserving a high level of political continuity to the interwar republics under the assumption that they would be able to regain their positions in liberated, democratic societies. American policymakers, however, were primarily concerned with maintaining the non-recognition policy, the framework in which all policy considerations were analyzed. I argue that these two motivating factors created unnecessary tensions in American policy towards the Baltic republics in the spheres of psychological warfare as well as exile unity in the United States and Europe. Despite these shortcomings, I argue that out of the exiles’ failings was born a generation of Baltic constituents that blurred the political legitimacy line between exiles who sought to return home and ethnic Americans who were loyal to the United States. These Baltic constituents played an important role in garnering the support of the United States Congress, starting in the 1950s, but became increasingly influential after the 1956 Hungarian Revolution, despite the seemingly less important role Eastern Europe played in the Cold War. The actions of the Baltic constituents not only prevented the Baltic question from being forever lost in the memory hole of history, but actually created enough political pressure on the State Department that it was impossible to alter the long-standing policy of not recognizing the Soviet annexation of the Baltic States.

Bag-of-Features Approach to Unsupervised Visual Object Categorisation

The large and growing number of digital images is making manual image search laborious. Only a fraction of the images contain metadata that can be used to search for a particular type of image. Thus, the main research question of this thesis is whether it is possible to learn visual object categories directly from images. Computers process images as long lists of pixels that do not have a clear connection to high-level semantics which could be used in the image search. There are various methods introduced in the literature to extract low-level image features and also approaches to connect these low-level features with high-level semantics. One of these approaches is called Bag-of-Features which is studied in the thesis. In the Bag-of-Features approach, the images are described using a visual codebook. The codebook is built from the descriptions of the image patches using clustering. The images are described by matching descriptions of image patches with the visual codebook and computing the number of matches for each code. In this thesis, unsupervised visual object categorisation using the Bag-of-Features approach is studied. The goal is to find groups of similar images, e.g., images that contain an object from the same category. The standard Bag-of-Features approach is improved by using spatial information and visual saliency. It was found that the performance of the visual object categorisation can be improved by using spatial information of local features to verify the matches. However, this process is computationally heavy, and thus, the number of images must be limited in the spatial matching, for example, by using the Bag-of-Features method as in this study. Different approaches for saliency detection are studied and a new method based on the Hessian-Affine local feature detector is proposed. The new method achieves comparable results with current state-of-the-art. The visual object categorisation performance was improved by using foreground segmentation based on saliency information, especially when the background could be considered as clutter.

COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i) drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii) physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

On the impact of rigorous approaches on the quality of development

Software systems are expanding and becoming increasingly present in everyday activities. The constantly evolving society demands that they deliver more functionality, are easy to use and work as expected. All these challenges increase the size and complexity of a system. People may not be aware of a presence of a software system, until it malfunctions or even fails to perform. The concept of being able to depend on the software is particularly significant when it comes to the critical systems. At this point quality of a system is regarded as an essential issue, since any deficiencies may lead to considerable money loss or life endangerment. Traditional development methods may not ensure a sufficiently high level of quality. Formal methods, on the other hand, allow us to achieve a high level of rigour and can be applied to develop a complete system or only a critical part of it. Such techniques, applied during system development starting at early design stages, increase the likelihood of obtaining a system that works as required. However, formal methods are sometimes considered difficult to utilise in traditional developments. Therefore, it is important to make them more accessible and reduce the gap between the formal and traditional development methods. This thesis explores the usability of rigorous approaches by giving an insight into formal designs with the use of graphical notation. The understandability of formal modelling is increased due to a compact representation of the development and related design decisions. The central objective of the thesis is to investigate the impact that rigorous approaches have on quality of developments. This means that it is necessary to establish certain techniques for evaluation of rigorous developments. Since we are studying various development settings and methods, specific measurement plans and a set of metrics need to be created for each setting. Our goal is to provide methods for collecting data and record evidence of the applicability of rigorous approaches. This would support the organisations in making decisions about integration of formal methods into their development processes. It is important to control the software development, especially in its initial stages. Therefore, we focus on the specification and modelling phases, as well as related artefacts, e.g. models. These have significant influence on the quality of a final system. Since application of formal methods may increase the complexity of a system, it may impact its maintainability, and thus quality. Our goal is to leverage quality of a system via metrics and measurements, as well as generic refinement patterns, which are applied to a model and a specification. We argue that they can facilitate the process of creating software systems, by e.g. controlling complexity and providing the modelling guidelines. Moreover, we find them as additional mechanisms for quality control and improvement, also for rigorous approaches. The main contribution of this thesis is to provide the metrics and measurements that help in assessing the impact of rigorous approaches on developments. We establish the techniques for the evaluation of certain aspects of quality, which are based on structural, syntactical and process related characteristics of an early-stage development artefacts, i.e. specifications and models. The presented approaches are applied to various case studies. The results of the investigation are juxtaposed with the perception of domain experts. It is our aspiration to promote measurements as an indispensable part of quality control process and a strategy towards the quality improvement.

Patenttien vaikutus suomalaisten pörssiyritysten markkina-arvoon - reaalioptiosovellutus

Tutkielman tavoitteena oli tutkia onko patenteilla positiivinen vaikutus yrityksen markkina-arvoon. Aihetta tutkittiin reaalioptionäkökulmasta: miten patentit voidaan nähdä reaalioptioiden ilmentymänä ja millainen vaikutus niillä on yrityksen suoriutumiseen. Lisäksi tutkittiin onko patenttien vaikutuksessa toimialakohtaisia eroja. Tavoitteena oli myös selvittää onko patenttien vaikutus erilainen talouden eri suhdanteissa. Empiriana tutkimuksessa olivat suomalaiset pörssiyritykset ja niiden Suomeen myönnetyt patentit. Tutkittavana ajanjaksona oli 2001–2010. Tutkimusongelmista johdettuja hypoteeseja testattiin regressioanalyysien avulla. Selitettävänä muuttujana oli yrityksen Tobin’s q ja selittävänä muuttujana yrityksen voimassa olleiden patenttien ja tasearvon suhdeluku. Kontrollimuuttujina käytettiin vuotta ja toimialaa. Tulokseksi saatiin, että patenteilla on ollut positiivinen vaikutus suomalaisten pörssiyritysten markkina-arvoon 2000-luvulla. Varsinkin teknologian ja perusmateriaalien toimialoilla yhteys oli vahvempi kuin muilla toimialoilla. Saadut tulokset ovat yhdenmukaisia aiempien tutkimusten kanssa. Aineiston erityispiirteet toivat tutkimukseen omat haasteensa, jotka vaikuttivat muun muassa toimialaryhmien muodostamiseen sekä makroekonomisen ympäristön merkityksen tutkimiseen.

Fuzzy rule-based system for evaluation of uncertainty transaction in cassava chain

A fuzzy ruled-based system was developed in this study and resulted in an index indicating the level of uncertainty related to commercial transactions between cassava growers and their dealers. The fuzzy system was developed based on Transaction Cost Economics approach. The fuzzy system was developed from input variables regarding information sharing between grower and dealer on “Demand/purchase Forecasting”, “Production Forecasting” and “Production Innovation”. The output variable is the level of uncertainty regarding the transaction between seller and buyer agent, which may serve as a system for detecting inefficiencies. Evidences from 27 cassava growers registered in the Regional Development Offices of Tupa and Assis, São Paulo, Brazil, and 48 of their dealers supported the development of the system. The mathematical model indicated that 55% of the growers present a Very High level of uncertainty, 33% present Medium or High. The others present Low or Very Low level of uncertainty. From the model, simulations of external interferences can be implemented in order to improve the degree of uncertainty and, thus, lower transaction costs.

Molecular Systematics of Noctuoidea (Insecta, lepidoptera)

In this thesis, I conduct a series of molecular systematic studies on the large phytophagous moth superfamily Noctuoidea (Insecta, Lepidoptera) to clarify deep divergences and evolutionary affinities of the group, based on material from every zoogeographic region of the globe. Noctuoidea are the most speciose radiations of butterflies and moths on earth, comprising about a quarter of all lepidopteran diversity. The general aim of these studies was to apply suitably conservative genetic markers (DNA sequences of mitochondrial—mtDNA—and nuclear gene— nDNA—regions) to reconstruct, as the initial step, a robust skeleton phylogenetic hypothesis for the superfamily, then build up robust phylogenetic frameworks for those circumscribed monophyletic entities (i.e., families), as well as clarifying the internal classification of monophyletic lineages (subfamilies and tribes), to develop an understanding of the major lineages at various taxonomic levels within the superfamily Noctuoidea, and their inter-relationships. The approaches applied included: i) stabilizing a robust family-level classification for the superfamily; ii) resolving the phylogeny of the most speciose radiation of Noctuoidea: the family Erebidae; iii) reconstruction of ancestral feeding behaviors and evolution of the vampire moths (Erebidae, Calpinae); iv) elucidating the evolutionary relationships within the family Nolidae and v) clarifying the basal lineages of Noctuidae sensu stricto. Thus, in this thesis I present a wellresolved molecular phylogenetic hypothesis for higher taxa of Noctuoidea consisting of six strongly supported families: Oenosandridae, Notodontidae, Euteliidae, Erebidae, Nolidae, and Noctuidae. The studies in my thesis highlight the importance of molecular data in systematic and phylogenetic studies, in particular DNA sequences of nuclear genes, and an extensive sampling strategy to include representatives of all known major lineages of entire world fauna of Noctuoidea from every biogeographic region. This is crucial, especially when the model organism is as species-rich, highly diverse, cosmopolitan and heterogeneous as the Noctuoidea, traits that represent obstacles to the use of morphology at this taxonomic level.

Hazard Risk Management in Large Nordic Companies' Operations in Russia

The objective of this research was to describe how Nordic companies manage hazard risks in their operations in Russia and how the local business environment is considered to affect the hazard risks. Research methods used in this research were literature review and expert interviews. Twelve Nordic industrial companies operating in different fields of industry were interviewed. Large Nordic companies typically guide risk management centralized from the parent company on behalf of the whole company group and the risk management standards and policies are integrated in all subsidiaries. Parent companies typically control hazard risk management in Russia by regular risk management reporting, auditing the Russian sites and by training local managers and employees to risk management work. Many companies have experienced several losses in the first years of operating in Russia before the risk management policies have been implemented in Russian subsidiaries. The companies have learned to take local characteristics better into account by experience and most companies are quite satisfied with their current risk management standards in Russia. The interviews indicate that companies experience especially the poor quality of infrastructure, some features in Russian organizational culture and high level of criminality to increase hazard risks in Russia. However, understanding these features and risks in the business environment makes the management of these risks possible. Risks related to infrastructure can be managed in advance by decreasing dependencies of infrastructure and considering the infrastructure quality already when planning the business operations. Also good local network is often considered critical in order to overcome the complications related to infrastructure. Russian personnel has typically different attitude towards risk management than Nordic personnel and neglecting safety and maintenance and concealing losses is more typical in Russia. By training and guiding the local personnel risk management and safety work and desired ways of actions these risks can be decreased. Criminality risks are often managed to certain extent by investing in security, increasing supervising and paying attention to reliability of the employees and other interest groups of the company.

The Finnish Paper Workers' Union at a crossroads: Labor union representativeness in a changing environment, 1980-2008

This thesis consists of four articles and an introductory section. The main research questions in all the articles refer to the changes in the representativeness of the Finnish Paper Workers' Union. Representativeness stands for the entire entity of external, internal, legal and reputational factors that enable the labor union to represent its members and achieve its goals. This concept is based on an extensive reading of quantitative and qualitative industrial relations literature, which includes works based on Marxist labor-capital relations (such as Hyman's industrial relations studies), and more recent union density studies as well as gender- and ethnic diversity-based 'union revitalization' studies. Müller-Jentsch's German studies of industrial relations have been of particular importance as well as Streeck's industrial unionism and technology studies. The concept of representativeness is an attempt to combine the insights of these diverse strands of literature and bring the scientific discussion of labor unions back to the core of a union's function: representing its members. As such, it can be seen as a theoretical innovation. The concept helps to acknowledge both the heterogeneity of the membership and the totality of a labor union organization. The concept of representativeness aims to move beyond notions of 'power'. External representativeness can be expressed through the position of the labor union in the industrial relations system and the economy. Internal representativeness focuses on the aspects of labor unions that relate to the function of the union as an association with members, such as internal democracy. Legal representativeness lies in the formal legal position of the union – its rights and instruments. This includes collective bargaining legislation, co-decision rules and industrial conflict legislation. Reputational representativeness is related to how the union is seen by other actors and the general public, and can be approximated using data on strike activity. All these aspects of representativeness are path-dependent, and show the results of previous struggles over issues. The concept of representativeness goes beyond notions of labor union power and symbolizes an attempt to bring back the focus of industrial relations studies to the union's basic function of representing its members. The first article shows in detail the industrial conflict of the Finnish paper industry in 2005. The intended focus was the issue of gender in the negotiations over a new collective agreement, but the focal point of the industrial conflict was the issue of outsourcing and how this should be organized. Also, the issue of continuous shifts as an issue of working time was very important. The drawn-out conflict can be seen as a struggle over principles, and under pressure the labor union had to concede ground on the aforementioned issues. The article concludes that in this specific conflict, the union represented its' female members to a lesser extent, because the other issues took such priority. Furthermore, because of the substantive concessions. the union lost some of its internal representativeness, and the stubbornness of the union may have even harmed the reputation of the union. This article also includes an early version of the representativeness framework, through which this conflict is analyzed. The second article discusses wage developments, union density and collective bargaining within the context of representativeness. It is shown that the union has been able to secure substantial benefits for its members, regardless of declining employment. Collective agreements have often been based on centralized incomes policies, but the paper sector has not always joined these. Attention is furthermore paid to the changing competition of the General Assembly, with a surprisingly strong position of the Left Alliance still. In an attempt to replicate analysis of union density measures, an analysis of sectoral union density shows that similar factors as in aggregate data influence this measure, though – due to methodological issues – the results may not be robust. On this issue, it can be said that the method of analysis for aggregate union density is not suitable for sectoral union density analysis. The increasingly conflict-ridden industrial relations predicted have not actually materialized. The article concludes by asking whether the aim of ever-increasing wages is a sustainable one in the light of the pressures of globalization, though wage costs are a relatively small part of total costs. The third article discusses the history and use of outsourcing in the Finnish paper industry. It is shown using Hyman's framework of constituencies that over time, the perspective of the union changed from 'members of the Paper Workers' Union' to a more specific view of who is a core member of the union. Within the context of the industrial unionism that the union claims to practice, this is an important change. The article shows that the union more and more caters for a core group, while auxiliary personnel is less important to the union's identity and constituencies, which means that the union's internal representativeness has decreased. Maintenance workers are an exception; the union and employers have developed a rotating system that increases the efficient allocation of these employees. The core reason of the exceptional status of maintenance personnel is their high level of non-transferable skills. In the end it is debatable whether the compromise on outsourcing solves the challenges facing the industry. The fourth article shows diverging discourses within the union with regard to union-employer partnership for competitiveness improvements and instruments of local union representatives. In the collective agreement of 2008, the provision regulating wage effects of significant changes in the organization or content of work was thoroughly changed, though this mainly reflected decisions by the Labor Court on the pre-2008 version of the provision. This change laid bare the deep rift between the Social Democratic and Left Alliance (ex-Communist) factions of the union. The article argues that through the changed legal meaning of the provision, the union was able to transform concession bargaining into a basis for partnership. The internal discontent about this issue is nonetheless substantial and a threat to the unity of the union, both locally and at the union level. On the basis of the results of the articles, other factors influencing representativeness, such as technology and EU law and an overview of the main changes in the Finnish paper industry, it is concluded that, especially in recent years, the Finnish Paper Workers' Union has lost some of its representativeness. In particular, the loss of the efficiency of strikes is noted, the compromise on outsourcing which may have alienated a substantial part of the union's membership, and the change in the collective agreement of 2008 have caused this decline. In the latter case, the internal disunion on that issue shows the constraints of the union's internal democracy. Furthermore, the failure of the union to join the TEAM industrial union (by democratic means), the internal conflicts and a narrow focus on its own sector may also hurt the union in the future, as the paper industry in Finland is going through a structural change. None of these changes in representativeness would have been so drastic without the considerable pressure of globalization - in particular changing markets, changing technology and a loss of domestic investments to foreign investments, which in the end have benefited the corporations more than the Finnish employees of these corporations. Taken together, the union risks becoming socially irrelevant in time, though it will remain formally very strong on the basis of its institutional setting and financial situation.

Infecção por micobactérias de crescimento rápido após procedimentos videocirúrgicos - a hipótese do glutaraldeído

Between August 2006 and February 2007, in the state of Rio de Janeiro, Brazil, a massive outbreak of RGM infections after video laparoscopy was mainly associated to the recently described Mycobacterium massiliense species. All confirmed and probable cases reports described the use of high-level disinfection of medical devices by using 2% glutaraldehyde (2% GA) for 30 min before the surgical procedures. We investigated the susceptibility of the M. massiliense isolates recovered during the outbreak to high-level disinfection after 30 min, 1h, 6h and 10h of exposure to the commercial disinfectants. Reference strains for official mycobactericidal tests such as Mycobacterium abscessus, Mycobacterium bovis, Mycobacterium chelonae, Mycobacterium neoaurum and Mycobacterium smegmatis were included as controls. Although all the reference strains were eliminated in 30 min of exposure to 2% GA, we observed the recovery of all M. massiliense clinical isolates even after 10h of exposure. This study suggests that failures in high-level disinfection and the high tolerance of these M. massiliense clinical strains to the 2% GA were strongly associated to the magnitude of the outbreak.

Software Development Process Modeling. Developers Perspective to Contemporary Modeling Techniques

Formal software development processes and well-defined development methodologies are nowadays seen as the definite way to produce high-quality software within time-limits and budgets. The variety of such high-level methodologies is huge ranging from rigorous process frameworks like CMMI and RUP to more lightweight agile methodologies. The need for managing this variety and the fact that practically every software development organization has its own unique set of development processes and methods have created a profession of software process engineers. Different kinds of informal and formal software process modeling languages are essential tools for process engineers. These are used to define processes in a way which allows easy management of processes, for example process dissemination, process tailoring and process enactment. The process modeling languages are usually used as a tool for process engineering where the main focus is on the processes themselves. This dissertation has a different emphasis. The dissertation analyses modern software development process modeling from the software developers’ point of view. The goal of the dissertation is to investigate whether the software process modeling and the software process models aid software developers in their day-to-day work and what are the main mechanisms for this. The focus of the work is on the Software Process Engineering Metamodel (SPEM) framework which is currently one of the most influential process modeling notations in software engineering. The research theme is elaborated through six scientific articles which represent the dissertation research done with process modeling during an approximately five year period. The research follows the classical engineering research discipline where the current situation is analyzed, a potentially better solution is developed and finally its implications are analyzed. The research applies a variety of different research techniques ranging from literature surveys to qualitative studies done amongst software practitioners. The key finding of the dissertation is that software process modeling notations and techniques are usually developed in process engineering terms. As a consequence the connection between the process models and actual development work is loose. In addition, the modeling standards like SPEM are partially incomplete when it comes to pragmatic process modeling needs, like light-weight modeling and combining pre-defined process components. This leads to a situation, where the full potential of process modeling techniques for aiding the daily development activities can not be achieved. Despite these difficulties the dissertation shows that it is possible to use modeling standards like SPEM to aid software developers in their work. The dissertation presents a light-weight modeling technique, which software development teams can use to quickly analyze their work practices in a more objective manner. The dissertation also shows how process modeling can be used to more easily compare different software development situations and to analyze their differences in a systematic way. Models also help to share this knowledge with others. A qualitative study done amongst Finnish software practitioners verifies the conclusions of other studies in the dissertation. Although processes and development methodologies are seen as an essential part of software development, the process modeling techniques are rarely used during the daily development work. However, the potential of these techniques intrigues the practitioners. As a conclusion the dissertation shows that process modeling techniques, most commonly used as tools for process engineers, can also be used as tools for organizing the daily software development work. This work presents theoretical solutions for bringing the process modeling closer to the ground-level software development activities. These theories are proven feasible by presenting several case studies where the modeling techniques are used e.g. to find differences in the work methods of the members of a software team and to share the process knowledge to a wider audience.