Molecular dynamics studies of nanoparticle impacts

This thesis concerns the dynamics of nanoparticle impacts on solid surfaces. These impacts occur, for instance, in space, where micro- and nanometeoroids hit surfaces of planets, moons, and spacecraft. On Earth, materials are bombarded with nanoparticles in cluster ion beam devices, in order to clean or smooth their surfaces, or to analyse their elemental composition. In both cases, the result depends on the combined effects of countless single impacts. However, the dynamics of single impacts must be understood before the overall effects of nanoparticle radiation can be modelled. In addition to applications, nanoparticle impacts are also important to basic research in the nanoscience field, because the impacts provide an excellent case to test the applicability of atomic-level interaction models to very dynamic conditions. In this thesis, the stopping of nanoparticles in matter is explored using classical molecular dynamics computer simulations. The materials investigated are gold, silicon, and silica. Impacts on silicon through a native oxide layer and formation of complex craters are also simulated. Nanoparticles up to a diameter of 20 nm (315000 atoms) were used as projectiles. The molecular dynamics method and interatomic potentials for silicon and gold are examined in this thesis. It is shown that the displacement cascade expansionmechanism and crater crown formation are very sensitive to the choice of atomic interaction model. However, the best of the current interatomic models can be utilized in nanoparticle impact simulation, if caution is exercised. The stopping of monatomic ions in matter is understood very well nowadays. However, interactions become very complex when several atoms impact on a surface simultaneously and within a short distance, as happens in a nanoparticle impact. A high energy density is deposited in a relatively small volume, which induces ejection of material and formation of a crater. Very high yields of excavated material are observed experimentally. In addition, the yields scale nonlinearly with the cluster size and impact energy at small cluster sizes, whereas in macroscopic hypervelocity impacts, the scaling 2 is linear. The aim of this thesis is to explore the atomistic mechanisms behind the nonlinear scaling at small cluster sizes. It is shown here that the nonlinear scaling of ejected material yield disappears at large impactor sizes because the stopping mechanism of nanoparticles gradually changes to the same mechanism as in macroscopic hypervelocity impacts. The high yields at small impactor size are due to the early escape of energetic atoms from the hot region. In addition, the sputtering yield is shown to depend very much on the spatial initial energy and momentum distributions that the nanoparticle induces in the material in the first phase of the impact. At the later phases, the ejection of material occurs by several mechanisms. The most important mechanism at high energies or at large cluster sizes is atomic cluster ejection from the transient liquid crown that surrounds the crater. The cluster impact dynamics detected in the simulations are in agreement with several recent experimental results. In addition, it is shown that relatively weak impacts can induce modifications on the surface of an amorphous target over a larger area than was previously expected. This is a probable explanation for the formation of the complex crater shapes observed on these surfaces with atomic force microscopy. Clusters that consist of hundreds of thousands of atoms induce long-range modifications in crystalline gold.

Local numerical modelling of magnetoconvection and turbulence - implications for mean-field theories

During the last decades mean-field models, in which large-scale magnetic fields and differential rotation arise due to the interaction of rotation and small-scale turbulence, have been enormously successful in reproducing many of the observed features of the Sun. In the meantime, new observational techniques, most prominently helioseismology, have yielded invaluable information about the interior of the Sun. This new information, however, imposes strict conditions on mean-field models. Moreover, most of the present mean-field models depend on knowledge of the small-scale turbulent effects that give rise to the large-scale phenomena. In many mean-field models these effects are prescribed in ad hoc fashion due to the lack of this knowledge. With large enough computers it would be possible to solve the MHD equations numerically under stellar conditions. However, the problem is too large by several orders of magnitude for the present day and any foreseeable computers. In our view, a combination of mean-field modelling and local 3D calculations is a more fruitful approach. The large-scale structures are well described by global mean-field models, provided that the small-scale turbulent effects are adequately parameterized. The latter can be achieved by performing local calculations which allow a much higher spatial resolution than what can be achieved in direct global calculations. In the present dissertation three aspects of mean-field theories and models of stars are studied. Firstly, the basic assumptions of different mean-field theories are tested with calculations of isotropic turbulence and hydrodynamic, as well as magnetohydrodynamic, convection. Secondly, even if the mean-field theory is unable to give the required transport coefficients from first principles, it is in some cases possible to compute these coefficients from 3D numerical models in a parameter range that can be considered to describe the main physical effects in an adequately realistic manner. In the present study, the Reynolds stresses and turbulent heat transport, responsible for the generation of differential rotation, were determined along the mixing length relations describing convection in stellar structure models. Furthermore, the alpha-effect and magnetic pumping due to turbulent convection in the rapid rotation regime were studied. The third area of the present study is to apply the local results in mean-field models, which task we start to undertake by applying the results concerning the alpha-effect and turbulent pumping in mean-field models describing the solar dynamo.

Towards a typology of hashtag publics: A large-scale comparative study of user engagement across trending topics

Twitter’s hashtag functionality is now used for a very wide variety of purposes, from covering crises and other breaking news events through gathering an instant community around shared media texts (such as sporting events and TV broadcasts) to signalling emotive states from amusement to despair. These divergent uses of the hashtag are increasingly recognised in the literature, with attention paid especially to the ability for hashtags to facilitate the creation of ad hoc or hashtag publics. A more comprehensive understanding of these different uses of hashtags has yet to be developed, however. Previous research has explored the potential for a systematic analysis of the quantitative metrics that could be generated from processing a series of hashtag datasets. Such research found, for example, that crisis-related hashtags exhibited a significantly larger incidence of retweets and tweets containing URLs than hashtags relating to televised events, and on this basis hypothesised that the information-seeking and -sharing behaviours of Twitter users in such different contexts were substantially divergent. This article updates such study and their methodology by examining the communicative metrics of a considerably larger and more diverse number of hashtag datasets, compiled over the past five years. This provides an opportunity both to confirm earlier findings, as well as to explore whether hashtag use practices may have shifted subsequently as Twitter’s userbase has developed further; it also enables the identification of further hashtag types beyond the “crisis” and “mainstream media event” types outlined to date. The article also explores the presence of such patterns beyond recognised hashtags, by incorporating an analysis of a number of keyword-based datasets. This large-scale, comparative approach contributes towards the establishment of a more comprehensive typology of hashtags and their publics, and the metrics it describes will also be able to be used to classify new hashtags emerging in the future. In turn, this may enable researchers to develop systems for automatically distinguishing newly trending topics into a number of event types, which may be useful for example for the automatic detection of acute crises and other breaking news events.

Evaluation and modelling of the spatial and temporal variability of particulate matter in urban areas

This thesis contains three subject areas concerning particulate matter in urban area air quality: 1) Analysis of the measured concentrations of particulate matter mass concentrations in the Helsinki Metropolitan Area (HMA) in different locations in relation to traffic sources, and at different times of year and day. 2) The evolution of traffic exhaust originated particulate matter number concentrations and sizes in local street scale are studied by a combination of a dispersion model and an aerosol process model. 3) Some situations of high particulate matter concentrations are analysed with regard to their meteorological origins, especially temperature inversion situations, in the HMA and three other European cities. The prediction of the occurrence of meteorological conditions conducive to elevated particulate matter concentrations in the studied cities is examined. The performance of current numerical weather forecasting models in the case of air pollution episode situations is considered. The study of the ambient measurements revealed clear diurnal variation of the PM10 concentrations in the HMA measurement sites, irrespective of the year and the season of the year. The diurnal variation of local vehicular traffic flows seemed to have no substantial correlation with the PM2.5 concentrations, indicating that the PM10 concentrations were originated mainly from local vehicular traffic (direct emissions and suspension), while the PM2.5 concentrations were mostly of regionally and long-range transported origin. The modelling study of traffic exhaust dispersion and transformation showed that the number concentrations of particles originating from street traffic exhaust undergo a substantial change during the first tens of seconds after being emitted from the vehicle tailpipe. The dilution process was shown to dominate total number concentrations. Minimal effect of both condensation and coagulation was seen in the Aitken mode number concentrations. The included air pollution episodes were chosen on the basis of occurrence in either winter or spring, and having at least partly local origin. In the HMA, air pollution episodes were shown to be linked to predominantly stable atmospheric conditions with high atmospheric pressure and low wind speeds in conjunction with relatively low ambient temperatures. For the other European cities studied, the best meteorological predictors for the elevated concentrations of PM10 were shown to be temporal (hourly) evolutions of temperature inversions, stable atmospheric stability and in some cases, wind speed. Concerning the weather prediction during particulate matter related air pollution episodes, the use of the studied models were found to overpredict pollutant dispersion, leading to underprediction of pollutant concentration levels.

Formation of structure in dark energy cosmologies

Acceleration of the universe has been established but not explained. During the past few years precise cosmological experiments have confirmed the standard big bang scenario of a flat universe undergoing an inflationary expansion in its earliest stages, where the perturbations are generated that eventually form into galaxies and other structure in matter, most of which is non-baryonic dark matter. Curiously, the universe has presently entered into another period of acceleration. Such a result is inferred from observations of extra-galactic supernovae and is independently supported by the cosmic microwave background radiation and large scale structure data. It seems there is a positive cosmological constant speeding up the universal expansion of space. Then the vacuum energy density the constant describes should be about a dozen times the present energy density in visible matter, but particle physics scales are enormously larger than that. This is the cosmological constant problem, perhaps the greatest mystery of contemporary cosmology. In this thesis we will explore alternative agents of the acceleration. Generically, such are called dark energy. If some symmetry turns off vacuum energy, its value is not a problem but one needs some dark energy. Such could be a scalar field dynamically evolving in its potential, or some other exotic constituent exhibiting negative pressure. Another option is to assume that gravity at cosmological scales is not well described by general relativity. In a modified theory of gravity one might find the expansion rate increasing in a universe filled by just dark matter and baryons. Such possibilities are taken here under investigation. The main goal is to uncover observational consequences of different models of dark energy, the emphasis being on their implications for the formation of large-scale structure of the universe. Possible properties of dark energy are investigated using phenomenological paramaterizations, but several specific models are also considered in detail. Difficulties in unifying dark matter and dark energy into a single concept are pointed out. Considerable attention is on modifications of gravity resulting in second order field equations. It is shown that in a general class of such models the viable ones represent effectively the cosmological constant, while from another class one might find interesting modifications of the standard cosmological scenario yet allowed by observations. The thesis consists of seven research papers preceded by an introductory discussion.

Measurements of Volatile Organic Compounds - from Biogenic Emissions to Concentrations in Ambient Air

Volatile organic compounds (VOCs) affect atmospheric chemistry and thereafter also participate in the climate change in many ways. The long-lived greenhouse gases and tropospheric ozone are the most important radiative forcing components warming the climate, while aerosols are the most important cooling component. VOCs can have warming effects on the climate: they participate in tropospheric ozone formation and compete for oxidants with the greenhouse gases thus, for example, lengthening the atmospheric lifetime of methane. Some VOCs, on the other hand, cool the atmosphere by taking part in the formation of aerosol particles. Some VOCs, in addition, have direct health effects, such as carcinogenic benzene. VOCs are emitted into the atmosphere in various processes. Primary emissions of VOC include biogenic emissions from vegetation, biomass burning and human activities. VOCs are also produced in secondary emissions from the reactions of other organic compounds. Globally, forests are the largest source of VOC entering the atmosphere. This thesis focuses on the measurement results of emissions and concentrations of VOCs in one of the largest vegetation zones in the world, the boreal zone. An automated sampling system was designed and built for continuous VOC concentration and emission measurements with a proton transfer reaction - mass spectrometer (PTR-MS). The system measured one hour at a time in three-hourly cycles: 1) ambient volume mixing-ratios of VOCs in the Scots-pine-dominated boreal forest, 2) VOC fluxes above the canopy, and 3) VOC emissions from Scots pine shoots. In addition to the online PTR-MS measurements, we determined the composition and seasonality of the VOC emissions from a Siberian larch with adsorbent samples and GC-MS analysis. The VOC emissions from Siberian larch were reported for the fist time in the literature. The VOC emissions were 90% monoterpenes (mainly sabinene) and the rest sesquiterpenes (mainly a-farnesene). The normalized monoterpene emission potentials were highest in late summer, rising again in late autumn. The normalized sesquiterpene emission potentials were also highest in late summer, but decreased towards the autumn. The emissions of mono- and sesquiterpenes from the deciduous Siberian larch, as well as the emissions of monoterpenes measured from the evergreen Scots pine, were well described by the temperature-dependent algorithm. In the Scots-pine-dominated forest, canopy-scale emissions of monoterpenes and oxygenated VOCs (OVOCs) were of the same magnitude. Methanol and acetone were the most abundant OVOCs emitted from the forest and also in the ambient air. Annually, methanol and mixing ratios were of the order of 1 ppbv. The monoterpene and sum of isoprene 2-methyl-3-buten-2-ol (MBO) volume mixing-ratios were an order of magnitude lower. The majority of the monoterpene and methanol emissions from the Scots-pinedominated forest were explained by emissions from Scots pine shoots. The VOCs were divided into three classes based on the dynamics of the summer-time concentrations: 1) reactive compounds with local biological, anthropogenic or chemical sources (methanol, acetone, butanol and hexanal), 2) compounds whose emissions are only temperaturedependent (monoterpenes), 3) long-lived compounds (benzene, acetaldehyde). Biogenic VOC (methanol, acetone, isoprene MBO and monoterpene) volume mixing-ratios had clear diurnal patterns during summer. The ambient mixing ratios of other VOCs did not show this behaviour. During winter we did not observe systematical diurnal cycles for any of the VOCs. Different sources, removal processes and turbulent mixing explained the dynamics of the measured mixing-ratios qualitatively. However, quantitative understanding will require longterm emission measurements of the OVOCs and the use of comprehensive chemistry models. Keywords: Hydrocarbons, VOC, fluxes, volume mixing-ratio, boreal forest

Theoretical modeling of ionospheric electrodynamics including induction effects

This thesis deals with theoretical modeling of the electrodynamics of auroral ionospheres. In the five research articles forming the main part of the thesis we have concentrated on two main themes: Development of new data-analysis techniques and study of inductive phenomena in the ionospheric electrodynamics. The introductory part of the thesis provides a background for these new results and places them in the wider context of ionospheric research. In this thesis we have developed a new tool (called 1D SECS) for analysing ground based magnetic measurements from a 1-dimensional magnetometer chain (usually aligned in the North-South direction) and a new method for obtaining ionospheric electric field from combined ground based magnetic measurements and estimated ionospheric electric conductance. Both these methods are based on earlier work, but contain important new features: 1D SECS respects the spherical geometry of large scale ionospheric electrojet systems and due to an innovative way of implementing boundary conditions the new method for obtaining electric fields can be applied also at local scale studies. These new calculation methods have been tested using both simulated and real data. The tests indicate that the new methods are more reliable than the previous techniques. Inductive phenomena are intimately related to temporal changes in electric currents. As the large scale ionospheric current systems change relatively slowly, in time scales of several minutes or hours, inductive effects are usually assumed to be negligible. However, during the past ten years, it has been realised that induction can play an important part in some ionospheric phenomena. In this thesis we have studied the role of inductive electric fields and currents in ionospheric electrodynamics. We have formulated the induction problem so that only ionospheric electric parameters are used in the calculations. This is in contrast to previous studies, which require knowledge of the magnetospheric-ionosphere coupling. We have applied our technique to several realistic models of typical auroral phenomena. The results indicate that inductive electric fields and currents are locally important during the most dynamical phenomena (like the westward travelling surge, WTS). In these situations induction may locally contribute up to 20-30% of the total ionospheric electric field and currents. Inductive phenomena do also change the field-aligned currents flowing between the ionosphere and magnetosphere, thus modifying the coupling between the two regions.

Lightcurve inversion for asteroid spins and shapes

Knowledge of the physical properties of asteroids is crucial in many branches of solar-system research. Knowledge of the spin states and shapes is needed, e.g., for accurate orbit determination and to study the history and evolution of the asteroids. In my thesis, I present new methods for using photometric lightcurves of asteroids in the determination of their spin states and shapes. The convex inversion method makes use of a general polyhedron shape model and provides us at best with an unambiguous spin solution and a convex shape solution that reproduces the main features of the original shape. Deriving information about the non-convex shape features is, in principle, also possible, but usually requires a priori information about the object. Alternatively, a distribution of non-convex solutions, describing the scale of the non-convexities, is also possible to be obtained. Due to insufficient number of absolute observations and inaccurately defined asteroid phase curves, the $c/b$-ratio, i.e., the flatness of the shape model is often somewhat ill-defined. However, especially in the case of elongated objects, the flatness seems to be quite well constrained, even in the case when only relative lightcurves are available. The results prove that it is, contrary to the earlier misbelief, possible to derive shape information from the lightcurve data if a sufficiently wide range of observing geometries is covered by the observations. Along with the more accurate shape models, also the rotational states, i.e., spin vectors and rotation periods, are defined with improved accuracy. The shape solutions obtained so far reveal a population of irregular objects whose most descriptive shape characteristics, however, can be expressed with only a few parameters. Preliminary statistical analyses for the shapes suggests that there are correlations between shape and other physical properties, such as the size, rotation period and taxonomic type of the asteroids. More shape data of, especially, the smallest and largest asteroids, as well as the fast and slow rotators is called for in order to be able to study the statistics more thoroughly.

Gasifier stoves - science, technology and field outreach

Development of a new class of single pan high efficiency, low emission stoves, named gasifier stoves, that promise constant power that can be controlled using any solid biomass fuel in the form of pellets is reported here. These stoves use battery-run fan-based air supply for gasification (primary air) and for combustion (secondary air).Design with the correct secondary air flow ensures near-stoichiometric combustion that allows attainment of peak combustion temperatures with accompanying high water boiling efficiencies (up to 50% for vessels of practical relevance) and very low emissions (of carbon monoxide, particulate matter and oxides of nitrogen). The use of high density agro-residue based pellets or coconut shell pieces ensures operational duration of about an hour or more at power levels of 3 kWth (similar to 12 g/min). The principles involved and the optimization aspects of the design are outlined. The dependence of efficiency and emissions on the design parameters are described. The field imperatives that drive the choice of the rechargeable battery source and the fan are brought out. The implications of developments of Oorja-Plus and OorjaSuper stoves to the domestic cooking scenario of India are briefly discussed. The process development, testing and internal qualification tasks were undertaken by Indian Institute of Science. Product development and the fuel pellet production were dealt with by First Energy Private Ltd.Close interaction at several times during this period has helped progress the project from the laboratory to large scale commercial operation. At this time, over four hundred thousand stoves and 30 kilotonnes fuel have been sold in four states in India.

Characterisation of cellulose- and lignin-based materials using x-ray scattering methods

Wood is an important material for the construction and pulping industries. Using x-ray diffraction the microfibril angle of Sitka spruce wood was studied in the first part of this thesis. Sitka spruce (Picea sitchensis [Bong.] Carr.) is native to the west coast of North America, but due to its fast growth rate, it has also been imported to Europe. So far, its nanometre scale properties have not been systematically characterised. In this thesis the microfibril angle of Sitka spruce was shown to depend significantly on the origin of the tree in the first annual rings near the pith. Wood can be further processed to separate lignin from cellulose and hemicelluloses. Solid cellulose can act as a reducer for metal ions and it is also a porous support for nanoparticles. By chemically reducing nickel or copper in the solid cellulose support it is possible to get small nanoparticles on the surfaces of the cellulose fibres. Cellulose supported metal nanoparticles can potentially be used as environmentally friendly catalysts in organic chemistry reactions. In this thesis the size of the nickel and copper containing nanoparticles were studied using anomalous small-angle x-ray scattering and wide-angle x-ray scattering. The anomalous small-angle x-ray scattering experiments showed that the crystallite size of the copper oxide nanoparticles was the same as the size of the nanoparticles, so the nanoparticles were single crystals. The nickel containing nanoparticles were amorphous, but crystallised upon heating. The size of the nanoparticles was observed to be smaller when the reduction of nickel was done in aqueous ammonium hydrate medium compared to reduction made in aqueous solution. Lignin is typically seen as the side-product of wood industries. Lignin is the second most abundant natural polymer on Earth, and it possesses potential to be a useful material for many purposes in addition to being an energy source for the pulp mills. In this thesis, the morphology of several lignins, which were produced by different separation methods from wood, was studied using small-angle and ultra small-angle x-ray scattering. It was shown that the fractal model previously proposed for the lignin structure does not apply to most of the extracted lignin types. The only lignin to which the fractal model could be applied was kraft lignin. In aqueous solutions the average shape of the low molar mass kraft lignin particles was observed to be elongated and flat. The average shape does not necessarily correspond to the shape of the individual particles because of the polydispersity of the fraction and due to selfassociation of the particles. Lignins, and especially lignosulfonate, have many uses as dispersants, binders and emulsion stabilisers. In this thesis work the selfassociation of low molar mass lignosulfonate macromolecules was observed using small-angle x-ray scattering. By taking into account the polydispersity of the studied lignosulfonate fraction, the shape of the lignosulfonate particles was determined to be flat by fitting an oblate ellipsoidal model to the scattering intensity.

Creative Labor in Cinema and Media Industries

Introduction The rapidly burgeoning popularity of cinema at the beginning of the 20th century favored industrialized modes of creativity organized around large production studios that could churn out a steady stream of narrative feature films. By the mid-1910s, a handful of Hollywood studios became leaders in the production, distribution, and exhibition of popular commercial movies. In order to serve incessant demand for new titles, the studios relied on a set of conventions that allowed them to regularize production and realize workplace efficiencies. This entailed a socialized mode of creativity that would later be adopted by radio and television broadcasters. It would also become a model for cinema and media production around the world, both for commercial and state-supported institutions. Even today the core tenets of industrialized creativity prevail in most large media enterprises. During the 1980s and 1990s, however, media industries began to change radically, driven by forces of neoliberalism, corporate conglomeration, globalization, and technological innovation. Today, screen media are created both by large-scale production units and by networked ensembles of talent and skilled labor. Moreover, digital media production may take place in small shops or via the collective labor of media users or fans who have attracted attention due to their hyphenated status as both producers and users of media (i.e., “prosumers”). Studies of screen media labor fall into five conceptual and methodological categories: historical studies of labor relations, ethnographically inspired investigations of workplace dynamics, critical analyses of the spatial and social organization of labor, and normative assessments of industrialized creativity.

Non local scale effects on ultrasonic wave characteristics nanorods

In this paper, the nonlocal elasticity theory has been incorporated into classical Euler-Bernoulli rod model to capture unique features of the nanorods under the umbrella of continuum mechanics theory. The strong effect of the nonlocal scale has been obtained which leads to substantially different wave behaviors of nanorods from those of macroscopic rods. Nonlocal Euler-Bernoulli bar model is developed for nanorods. Explicit expressions are derived for wavenumbers and wave speeds of nanorods. The analysis shows that the wave characteristics are highly over estimated by the classical rod model, which ignores the effect of small-length scale. The studies also shows that the nonlocal scale parameter introduces certain band gap region in axial wave mode where no wave propagation occurs. This is manifested in the spectrum cures as the region where the wavenumber tends to infinite (or wave speed tends to zero). The results can provide useful guidance for the study and design of the next generation of nanodevices that make use of the wave propagation properties of single-walled carbon nanotubes. (C) 2010 Elsevier B.V. All rights reserved.

The Finnish Competition State and Entrepreneurial Policies in the Helsinki Region

The thesis examines the intensification and characteristics of a policy that emphasises economic competitiveness in Finland during the 1990s and early 2000s. This accentuation of economic objectives is studied at the level of national policy-making as well as at the regional level through the policies and strategies of cities and three universities in the Helsinki region. By combining the analysis of state policies, urban strategies and university activities, the study illustrates the pervasiveness of the objective of economic competitiveness and growth across these levels and sheds light on the features and contradictions of these policies on a broad scale. The thesis is composed of five research articles and a summary article. At the level of national policies, the central focus of the thesis is on the growing role of science and technology policy as a state means to promote structural economic change and its transformation towards a broader, yet ambivalent concept of innovation policy. This shift brings forward a tension between an increasing emphasis on economic aspects – innovations and competitiveness – as well as the expanding scope of issues across a wide range of policy sectors that are being subsumed under this market- and economy oriented framework. Related to science and technology policy, attention is paid to adjustments in university policy in which there has been increasing pressure for efficiency, rationalisation and commercialisation of academic activities. Furthermore, political efforts to build an information society through the application of information and communication technologies are analysed with particular attention to the balance between economic and social objectives. Finally, changes in state regional policy priorities and the tendency towards competitiveness are addressed. At the regional level, the focus of the thesis is on the policies of the cities in Finland’s capital region as well as strategies of three universities operating in the region, namely the University of Helsinki, Helsinki University of technology and Helsinki School of Economics. As regards the urban level, the main focus is on the changes and characteristics of the urban economic development policy of the City of Helsinki. With respect to the universities, the thesis examines their attempts to commercialise research and thus bring academic research closer to economic interests, and pays particular attention to the contradictions of commercialisation. Related to the universities, the activities of three intermediary organisations that the universities have established in order to increase cooperation with industry are analysed. These organisations are the Helsinki Science Park, Otaniemi International Innovation Centre and LTT Research Ltd. The summary article provides a synthesis of the material presented in the five original articles and relates the results of the articles to a broader discussion concerning the emergence of competition states and entrepreneurial cities and regions. The main points of reference are Bob Jessop’s and Neil Brenner’s theses on state and urban-regional restructuring. The empirical results and considerations from Finland and the Helsinki region are used to comment on, specify and criticise specific parts of the two theses.

Uuden median murros Alma Mediassa, Sanoma Oy:ssä ja Yleisradiossa 1994-2004

This is a qualitative and multimethodological comparative study, which consists of two main parts: examining the development of new media and analysing and comparing the new media strategies of the three companies studied (Alma Media, Sanoma and the Finnish Broadcasting Company Yleisradio). The study includes the first large-scale review in Finnish of the development of new media, paying attention to the birth of the Internet as well as to mobile media, web TV and any other element of new media. It also concentrates on the function of electronic distribution channels before the age of the Internet, e.g. cable text and videotext. Answers about how the three traditional Finnish media houses began spreading their content to the Internet and wireless applications in 1994–2004 are also given. In researching the new media strategies the study pays special attention to the attitudes that the three media companies adopted towards the Internet and other forms of new media in their strategies during the years in question. By analysing and comparing, e.g., the companies’ strategies and their investments, the study ascertains whether the companies had a joint functional model in adopting new media or acted totally on their own without taking too much notice of the media field overall. The study makes extensive use of previously published material. The researcher has also interviewed almost twenty people who were involved in getting the companies’ new media functions under way. The methods for the interviews were dialogue and snowball sampling. The researcher has created a classification in which he divides the business strategies into four different categories: active strategy, careful strategy, permissive strategy, and passive strategy. In comparing and analysing the companies the researcher has used the classification devised by Allan Afuah & Christopher L. Tucci. The seven element classification consists of dominant managerial logic, competency trap, fear of cannibalisation and loss of revenue, channel conflict, political power, co-opetitor power and emotional attachment. In analysing the company strategies the researcher has also noted the classifications of convergence made by Everette E. Dennis and Graham Murdock as well as the aspects formulated by Sylvia Chan-Olmsted and Louisa Ha concerning the success of the companies in adopting the Internet into their functions. Based on all these classifications and by further developing them the researcher analyses and compares the success of the new media strategies of the three Finnish companies. The outcome of the study is a conclusion as to what kind of strategies the companies have carried out their new media functions and how they have succeeded in it.

Work Stress in the Nursing Profession : An Evaluation of Organizational Causal Attribution

The goal of this study was to examine the role of organizational causal attribution in understanding the relation of work stressors (work-role overload, excessive role responsibility, and unpleasant physical environment) and personal resources (social support and cognitive coping) to such organizational-attitudinal outcomes as work engagement, turnover intention, and organizational identification. In some analyses, cognitive coping was also treated as an organizational outcome. Causal attribution was conceptualized in terms of four dimensions: internality-externality, attributing the cause of one’s successes and failures to oneself, as opposed to external factors, stability (thinking that the cause of one’s successes and failures is stable over time), globality (perceiving the cause to be operative on many areas of one’s life), and controllability (believing that one can control the causes of one’s successes and failures). Several hypotheses were derived from Karasek’s (1989) Job Demands–Control (JD-C) model and from the Job Demands–Resources (JD-R) model (Demerouti, Bakker, Nachreiner & Schaufeli, 2001). Based on the JD-C model, a number of moderation effects were predicted, stating that the strength of the association of work stressors with the outcome variables (e.g. turnover intentions) varies as a function of the causal attribution; for example, unpleasant work environment is more strongly associated with turnover intention among those with an external locus of causality than among those with an internal locuse of causality. From the JD-R model, a number of hypotheses on the mediation model were derived. They were based on two processes posited by the model: an energy-draining process in which work stressors along with a mediating effect of causal attribution for failures deplete the nurses’ energy, leading to turnover intention, and a motivational process in which personal resources along with a mediating effect of causal attribution for successes foster the nurses’ engagement in their work, leading to higher organizational identification and to decreased intention to leave the nursing job. For instance, it was expected that the relationship between work stressors and turnover intention could be explained (mediated) by a tendency to attribute one’s work failures to stable causes. The data were collected from among Finnish hospital nurses using e-questionnaires. Overall 934 nurses responded the questionnaires. Work stressors and personal resources were measured by five scales derived from the Occupational Stress Inventory-Revised (Osipow, 1998). Causal attribution was measured using the Occupational Attributional Style Questionnaire (Furnham, 2004). Work engagement was assessed through the Utrecht Work Engagement Scale (Schaufeli & al., 2002), turnover intention by the Van Veldhoven & Meijman (1994) scale, and organizational identification by the Mael & Ashforth (1992) measure. The results provided support for the function of causal attribution in the overall work stress process. Findings related to the moderation model can be divided into three main findings. First, external locus of causality along with job level moderated the relationship between work overload and cognitive coping. Hence, this interaction was evidenced only among nurses in non-supervisory positions. Second, external locus of causality and job level together moderated the relationship between physical environment and turnover intention. An opposite pattern of interaction was found for this interaction: among nurses, externality exacerbated the effect of perceived unpleasantness of the physical environment on turnover intention, whereas among supervisors internality produced the same effect. Third, job level also disclosed a moderation effect for controllability attribution over the relationship between physical environment and cognitive coping. Findings related to the mediation model for the energetic process indicated that the partial model in which work stressors have also a direct effect on turnover intention fitted the data better. In the mediation model for the motivational process, an intermediate mediation effect in which the effects of personal resources on turnover intention went through two mediators (e.g., causal dimensions and organizational identification) fitted the data better. All dimensions of causal attribution appeared to follow a somewhat unique pattern of mediation effect not only for energetic but also for motivational processes. Overall findings on mediation models partly supported the two simultaneous underlying processes proposed by the JD-R model. While in the energetic process the dimension of externality mediated the relationship between stressors and turnover partially, all the dimensions of causal attribution appeared to entail significant mediator effects in the motivational process. The general findings supported the moderation effect and the mediation effect of causal attribution in the work stress process. The study contributes to several research traditions, including the interaction approach, the JD-C, and the JD-R models. However, many potential functions of organizational causal attribution are yet to be evaluated by relevant academic and organizational research. Keywords: organizational causal attribution, optimistic / pessimistic attributional style, work stressors, organisational stress process, stressors in nursing profession, hospital nursing, JD-R model, personal resources, turnover intention, work engagement, organizational identification.