Classification and inventory management of abnormal demand items

The main objective of the study is to form a framework that provides tools to recognise and classify items whose demand is not smooth but varies highly on size and/or frequency. The framework will then be combined with two other classification methods in order to form a three-dimensional classification model. Forecasting and inventory control of these abnormal demand items is difficult. Therefore another object of this study is to find out which statistical forecasting method is most suitable for forecasting of abnormal demand items. The accuracy of different methods is measured by comparing the forecast to the actual demand. Moreover, the study also aims at finding proper alternatives to the inventory control of abnormal demand items. The study is quantitative and the methodology is a case study. The research methods consist of theory, numerical data, current state analysis and testing of the framework in case company. The results of the study show that the framework makes it possible to recognise and classify the abnormal demand items. It is also noticed that the inventory performance of abnormal demand items differs significantly from the performance of smoothly demanded items. This makes the recognition of abnormal demand items very important.

State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Management Control for Corporate Sustainability Execution: The Role of Employee Compensation

The research described in this thesis examines the characteristics, the benefits and the challenges associated with the implementation of management accounting systems in the field of Corporate Social Responsibility (CSR). Applied to the CSR context, management accounting relates to the identification, elaboration and communication of information about an organization's interactions with the society and the environment. Based on this information, firms are able to make decisions to achieve social and environmental objectives and provide evidence justifying the benefits and the costs of such actions. The study begins by focusing on green management and exploring the characteristics of Environmental Management Accounting (EMA) systems within firms. The first chapter informs the reader about the growing body of EMA research and reveals unexplored relevant aspects that need to be further investigated. The work also emphasizes the importance of developing new theoretical hypotheses and appropriate research designs to empirically tackle new aspects of EMA and gain understanding on the use of these practices. Subsequently, given the acknowledged importance of control systems in influencing the behaviour of individuals within organizations, the remaining two chapters of the dissertation focus on the functioning of CSR-linked incentives assigned to employees in the form of compensation plans. The second chapter examines the determinants influencing corporate provision of incentives for the attainment of environmental targets. Empirical analysis of a sample of international firms reveals that companies are likely to use green incentives as mechanisms to increase the efficacy in contracting with their employees as well as to respond to social influences. Finally, the third chapter investigates the effectiveness of contracting associated with the use of CSR-linked executive compensation. Empirical analysis of a sample of US-based companies shows that corporate choice to tie senior executives' pay to CSR targets promotes the firm's CSR performance. Cette thèse examine les caractéristiques, avantages et défis associés à l'utilisation des systèmes de contrôle de gestion dans le domaine de la Responsabilité Sociale des Entreprises (RSE). Dans le contexte de la RSE, les activités du contrôle de gestion impliquent l'identification, l'élaboration et la communication d'informations qui concernent les interactions des organisations avec la société et l'environnement. Avec ces informations les entreprises sont en mesure de prendre des décisions visant à atteindre les objectifs sociaux et environnementaux de l'organisation et de documenter les bénéfices et coûts de ces actions. Dès le début, la thèse se concentre sur les caractéristiques des systèmes de contrôle de gestion environnementale au sein des entreprises. Le premier chapitre passe en revue la littérature existante et révèle des aspects inexplorés. Pour ce faire, le travail suggère le développement de nouvelles théories ainsi que l'utilisation de méthodes appropriées. Ces dernières doivent permettre d'aborder empiriquement de nouveaux aspects des systèmes de contrôle environnemental et faciliter la compréhension sur l'utilisation de ces pratiques. Considérant l'importance des systèmes de contrôle pour influencer le comportement des individus au sein des organisations, la suite du travail se concentre sur le fonctionnement des contrats de rémunération des employées liées aux résultats de la RSE. Plus particulièrement, le deuxième chapitre examine les facteurs qui influencent la décision des entreprises d'assigner des objectifs environnementaux aux employées. L'analyse empirique d'un échantillon d'entreprises internationales montre que les entreprises sont susceptibles d'utiliser des mécanismes incitatifs écologiques pour augmenter l'efficacité des contrats ainsi que pour répondre aux influences sociales. Finalement, le troisième chapitre analyse l'efficacité des contrats de rémunération des dirigeants liés aux résultats de la RSE. L'analyse empirique d'un échantillon de sociétés américaines indique que le choix de l'entreprise de lier la rémunération des dirigeants à des objectifs de la RSE favorise la performance RSE de l'organisation.

Anthropomorphic model observer performance in three-dimensional detection task for low-contrast computed tomography.

X-ray medical imaging is increasingly becoming three-dimensional (3-D). The dose to the population and its management are of special concern in computed tomography (CT). Task-based methods with model observers to assess the dose-image quality trade-off are promising tools, but they still need to be validated for real volumetric images. The purpose of the present work is to evaluate anthropomorphic model observers in 3-D detection tasks for low-contrast CT images. We scanned a low-contrast phantom containing four types of signals at three dose levels and used two reconstruction algorithms. We implemented a multislice model observer based on the channelized Hotelling observer (msCHO) with anthropomorphic channels and investigated different internal noise methods. We found a good correlation for all tested model observers. These results suggest that the msCHO can be used as a relevant task-based method to evaluate low-contrast detection for CT and optimize scan protocols to lower dose in an efficient way.

Governance mode vs. governance fit: Performance implications of make-or-ally choices for product innovation in the worldwide aircraft industry, 1942-2000

We examine the impact of governance mode and governance fit on performance in make-or-ally decisions. We argue that while horizontal collaboration and autonomous governance have direct and countervailing performance implications, the alignment of make-or-ally choices with the focal firm's resource endowment and the activity's resource requirements leads to better performance. Data on the aircraft industry show that relative to aircraft developed autonomously, collaborative aircraft exhibit greater sales but require longer time-to-market. However, governance fit increases unit sales and reduces time-to-market. We contribute to the alliance and economic organization literatures. (Copyright © 2013 John Wiley & Sons, Ltd.)

Performance of diagnostic centers in the classification of opportunistic screening mammograms from the Brazilian public health system (SUS)

Objective To evaluate the performance of diagnostic centers in the classification of mammography reports from an opportunistic screening undertaken by the Brazilian public health system (SUS) in the municipality of Goiânia, GO, Brazil in 2010. Materials and Methods The present ecological study analyzed data reported to the Sistema de Informação do Controle do Câncer de Mama (SISMAMA) (Breast Cancer Management Information System) by diagnostic centers involved in the mammographic screening developed by the SUS. Based on the frequency of mammograms per BI-RADS® category and on the limits established for the present study, the authors have calculated the rate of conformity for each diagnostic center. Diagnostic centers with equal rates of conformity were considered as having equal performance. Results Fifteen diagnostic centers performed mammographic studies for SUS and reported 31,198 screening mammograms. The performance of the diagnostic centers concerning BI-RADS classification has demonstrated that none of them was in conformity for all categories, one center presented conformity in five categories, two centers, in four categories, three centers, in three categories, two centers, in two categories, four centers, in one category, and three centers with no conformity. Conclusion The results of the present study demonstrate unevenness in the diagnostic centers performance in the classification of mammograms reported to SISMAMA from the opportunistic screening undertaken by SUS.

Tasolohkolinjan läpäisyaikojen tarkastelu ja kehittäminen Lean management periaatteita soveltaen

Diplomityön tavoitteena oli Aker Yardsin Turun telakan tasolohkolinjan läpäisyajan parantaminen. Työssä selvitettiin lohkotehtaan nykyinen läpimenoaika ja pyrittiin parantamaan sitä Lean management periaatteita soveltaen. Työssä suoritettiin perusteellinen työntutkimus yhdessä työnjohdon kanssa, jossa selvitettiin eri työvaiheiden läpimenoajat ja työtunnit. Tuloksista löydettiin kolme selvää kehityskohdetta, joilla saadaan nykyistä läpimenoaikaa ja alihankintakustannuksia pienemmäksi. Nämä kehityskohteet olivat jäykkääjien asennuksen ja hitsauksen parantaminen, myynnin jälkeisten töiden minimointi sekä nostotukien asennuksen tehostaminen. Lisäksi tutkimustyön ohella havaittiin neljäs kehityskohde, osavalmistuksen ajoittaminen oikeaan aikaan. Tämä ei tullut ilmi tutkimustuloksista vaan ihmisiä haastattelemalla. Kehityskohtien tunnistamisen perusteella luotiin investointiehdotus jäykkääjien toiminnan tehostamiseen, sekä uusia toimintatapoja myynnin jälkeisten töiden minimoimiseksi ja nostotukien asennuksen tehostamiseksi. Osavalmistuksen ajoittamisella oikeaan aikaan, pyritään tehostamaan toimintaa lohkonkoontipaikalla.

The role of alliance capabilities in alliance portfolio management

The question of why some firms perform better in managing their alliances has raised interest among scholars and managers. Whereas inter-firm factors influencing the alliance performance such as strategic fit between partners and the existence of complementarities have been studied extensively, research on firm-level antecedents is rather scarce. Therefore this study investigates the role of firm’s alliance capability in the alliance success equation. Particularly it analyses the specialized mechanisms and processes set up by firm in order to facilitate alliancerelated know-how leverage organization-wise. Evidence from a cross-industry sample of R&D intensive Finnish companies supports the fact that firms which have invested in institutionalizing alliance capabilities outperform their counterparts in alliance portfolio management. Results also suggest that firms need to adjust alliance management tools depending on the alliance portfolio size, prior experience with inter-firm partnerships and the strategic importance of alliances. Furthermore, absorptive capacity is found to be crucial for successful alliance management, its role being complementary to that of alliance capability. Finally, firms that have successful alliances also enjoy higher financial, market and innovation performance.

Fouling management and retention in nanofiltration of integrated paper mill effluents

Nanofiltration performance was studied with effluents from the pulp and paper industry and with model substances. The effect of filtration conditions and membrane properties on nanofiltration flux, retention, and fouling was investigated. Generally, the aim was to determine the parameters that influence nanofiltration efficiency and study how to carry out nanofiltration without fouling by controlling these parameters. The retentions of the nanofiltration membranes studied were considerably higher than those of tight ultrafiltration membranes, and the permeate fluxes obtained were approximately the same as those of tight ultrafiltration membranes. Generally, about 80% retentions of total carbon and conductivity were obtained during the nanofiltration experiments. Depending on the membrane and the filtration conditions, the retentions of monovalent ions (chloride) were between 80 and 95% in the nanofiltrations. An increase in pH improved retentions considerably and also the flux to some degree. An increase in pressure improved retention, whereas an increase in temperature decreased retention if the membrane retained the solute by the solution diffusion mechanism. In this study, more open membranes fouled more than tighter membranes due to higher concentration polarization and plugging of the membrane material. More irreversible fouling was measured for hydrophobic membranes. Electrostatic repulsion between the membrane and the components in the solution reduced fouling but did not completely prevent it with the hydrophobic membranes. Nanofiltration could be carried out without fouling, at least with the laboratory scale apparatus used here when the flux was below the critical flux. Model substances had a strong form of the critical flux, but the effluents had only a weak form of the critical flux. With the effluents, some fouling always occurred immediately when the filtration was started. However, if the flux was below the critical flux, further fouling was not observed. The flow velocity and pH were probably the most important parameters, along with the membrane properties, that influenced the critical flux. Precleaning of the membranes had only a small effect on the critical flux and retentions, but it improved the permeability of the membranes significantly.

Merchandising Strategies and Retail Performance for Seasonal Fashion Products

This study presents mathematical methods for evaluation of retail performance with special regard to product sourcing strategies. Forecast accuracy, process lead time, offshore / local sourcing mix and up front / replenishment buying mix are defined as critical success factors in connection with sourcing seasonal products with a fashion content. As success measures, this research focuses on service level, lost sales, product substitute percentage, gross margin, gross margin return on inventory and mark down rate. The accuracy of demand forecast is found to be a fundamental success factor. Forecast accuracy depends on lead time. Lead times are traditionally long and buying decisions are made seven to eight months prior to the start of the selling season. Forecast errors cause stockouts and lost sales. Some of the products bought for the selling season will not be sold and have to be marked down and sold at clearance, causing loss of gross margin. Gross margin percentage is not the best tool for evaluating sourcing decisions and in the context of this study gross margin return on inventory, which combines profitability and assets management, is used. The findings of this research suggest that there are more profitable ways of sourcing products than buying them from low cost offshore sources. Mixing up front and inseason replenishment deliveries, especially when point of sale information is used for improving forecast accuracy, results in better retail performance. Quick Response and Vendor Managed Inventory strategies yield better results than traditional up front buying from offshore even if local purchase prices are higher. Increasing the number of selling seasons, slight over buying for the season in order to

An analytic approach to distribution logistics strategic management

Logistics management is increasingly being recognised by many companies to be of critical concern. The logistics function includes directly or indirectly many of the new areas for achieving or maintaining competitive advantage that companies have been forced to develop due to increasing competitive pressures. The key to achieving a competitive advantage is to manage the logistics function strategically which involves determining the most cost effective method of providing the necessary customer service levels from the many combinations of operating procedures in the areas of transportation, warehousing, order processing and information systems, production, and inventory management. In this thesis, a comprehensive distribution logistics strategic management process is formed by integrating the periodic strategic planning process with a continuous strategic issues management process. Strategic planning is used for defining the basic objectives for a company and assuring co operation and synergy between the different functions of a company while strategic issues management is used on a continuous basis in order to deal with environmental and internal turbulence. The strategic planning subprocess consists of the following main phases: (1) situational analyses, (2) defining the vision and strategic goals for the logistics function, (3) determining objectives and strategies, (4) drawing up tactical action plans, and (5) evaluating the implementation of the plans and making the needed adjustments. The aim of the strategic issues management subprocess is to continuously scan the environment and the organisation for early identification of the issues having a significant impact on the logistics function using the following steps: (1) the identification of trends, (2) assessing the impact and urgency of the identified trends, (3) assigning priorities to the issues, and (4) planning responses to the, issues. The Analytic Hierarchy Process (AHP) is a systematic procedure for structuring any problem. AHP is based on the following three principles: decomposition, comparative judgements, and synthesis of priorities. AHP starts by decomposing a complex, multicriteria problem into a hierarchy where each level consists of a few manageable elements which are then decomposed into another set of elements. The second step is to use a measurement methodology to establish priorities among the elements within each level of the hierarchy. The third step in using AHP is to synthesise the priorities of the elements to establish the overall priorities for the decision alternatives. In this thesis, decision support systems are developed for different areas of distribution logistics strategic management by applying the Analytic Hierarchy Process. The areas covered are: (1) logistics strategic issues management, (2) planning of logistic structure, (3) warehouse site selection, (4) inventory forecasting, (5) defining logistic action and development plans, (6) choosing a distribution logistics strategy, (7) analysing and selecting transport service providers, (8) defining the logistic vision and strategic goals, (9) benchmarking logistic performance, and (10) logistic service management. The thesis demonstrates the potential of AHP as a systematic and analytic approach to distribution logistics strategic management.

Managing through measurement : A framework for successful operative level performance measurement

The research around performance measurement and management has focused mainly on the design, implementation and use of performance measurement systems. However, there is little evidence about the actual impacts of performance measurement on the different levels of business and operations of organisations, as well as the underlying factors that lead to a positive impact of performance measurement. The study thus focuses on this research gap, which can be considered both important and challenging to cover. The first objective of the study was to examine the impacts of performance measurement on different aspects of management, leadership and the quality of working life, after which the factors that facilitate and improve performance and performance measurement at the operative level of an organisation were examined. The second objective was to study how these factors operate in practice. The third objective focused on the construction of a framework for successful operative level performance measurement and the utilisation of the factors in the organisations. The research objectives have been studied through six research papers utilising empirical data from three separate studies, including two sets of interview data and one of quantitative data. The study applies mainly the hermeneutical research approach. As a contribution of the study, a framework for successful operative level performance measurement was formed by matching the findings of the current study and performance measurement theory. The study extents the prior research regarding the impacts of performance measurement and the factors that have a positive effect on operative level performance and performance measurement. The results indicate that under suitable circumstances, performance measurement has positive impacts on different aspects of management, leadership, and the quality of working life. The results reveal that for example the perception of the employees and the management of the impacts of performance measurement on leadership style differ considerably. Furthermore, the fragmented literature has been reorganised into six factors that facilitate and improve the performance of the operations and employees, and the use of performance measurement at the operative level of an organisation. Regarding the managerial implications of the study, managers who operate around performance measurement can utilise the framework for example by putting the different phases of the framework into practice.

Competitors' Financial Performance Monitoring Model

The objective of the thesis was to develop a competitors’ financial performance monitoring model for management reporting. The research consisted of the selections of the comparison group and the performance meters as well as the actual creation of the model. A brief analysis of the current situation was also made. The aim of the results was to improve the financial reporting quality in the case organization by adding external business environment observation to the management reports. The comparison group for the case company was selected to include five companies that were all involved in power equipment engineering and project type business. The most limiting factor related to the comparison group selection was the availability of quarterly financial reporting. The most suitable performance meters were defined to be the developments of revenue, order backlog and EBITDA. These meters should be monitored systematically on quarterly basis and reported to the company management in a brief and informative way. The monitoring model was based on spreadsheet construction with key characteristics being usability, flexibility and simplicity. The model acts as a centered storage for financial competitor information as well as a reporting tool. The current market situation is strongly affected by the economic boom in the recent years and future challenges can be clearly seen in declining order backlogs. The case company has succeeded well related to its comparison group during the observation period since its business volume and profitability have developed in the best way.

Supplier relationship management capability in the firm's global integration

Organizing is a general problem for global firms. Firms are seeking a balance between responsiveness at the local level and efficiency through worldwide integration. In this, supply management is the focal point where external commercial supply market relations are connected with the firm's internal functions. Here, effective supplier relationship management (SRM) is essential. Global supply integration processes create new challenges for supply management professionals and new capabilities are required. Previous research has developed several models and tools for managers to manage and categorize different supplier relationship types, but the role of the firm's internal capability of managing supplier relationships in their global integration has been a clearly neglected issue. Hence, the main objective of this dissertation is to clarify how the capability of SRM may influence the firm's global competitiveness. This objective is divided into four research questions aiming to identify the elements of SRM capability, the internal factors of integration, the effect of SRM capability on strategy and how SRM capability is linked with global integration. The dissertation has two parts. The first part presents the theoretical approaches and practical implications from previous research and draws a synthesis on them. The second part comprises four empirical research papers addressing the research questions. Both qualitative and quantitative methods are utilized in this dissertation. The main contribution of this dissertation is that it aggregates the theoretical and conceptual perspectives applied to SRM research. Furthermore, given the lack of valid scales to measure capability, this study aimed to provide a foundation for an SRM capability scale by showing that the construct of SRM capability is formed of five separate elements. Moreover, SRM capability was found to be the enabler in efforts toward value chain integration. Finally, it was found that the effect of capability on global competitiveness is twofold: it reduces conflicts between responsiveness and integration, and it creates efficiency. Thus, by identifying and developing the firm's capabilities it is possible to improve performance, and hence, global competitiveness.

Performance Indicators in Sourcing : Case: Mainospyörä Ltd

The business environment has rapidly become more global and more competitive. It sets new requirements for the company management. It is not enough to look at the financial information of the company, but one need to analyse also the internal processes as well. Sourcing exists in every company. It is no longer just a supporting function in a company chain of operations. By sourcing company can affect the profitability of the company in both direct and indirect ways The thesis overviewed the role of strategic accounting, sourcing and performance measurements in particularly, in company strategic steering. The study is qualitative, where the meaning was to describe true life. In the same time it is an explanatory case study. The aim of the study was to build up a set of sourcing performance indicators for the case company.