The Strategic Intent and Launching of a Knowledge Management Tool in a Complex Organisation, case Stora Enso Consumer Boards

Informaatiotulva ja organisaation monimutkaisuus luoneet tarpeen tietämyksen hallinnalle. Tämän tutkimuksen tavoitteena on tunnistaa muutostarpeet, jotka portaalin käyttöönotto tietämyksenhallintatyökaluna luo. Tutkimuksessa verrataan myös uusia työkaluja olemassa oleviin sekä arvioidaan organisaation kykyä siirtää tietämystä virtuaalisesti. Kirjallisuutta vastaavanlaisista projekteista ei ole ollut saatavilla, sillä käyttöönotettava teknologia on melko uutta. Samaa teknologiaa on käytössä hieman eri alueella, kuin tässä projektissa on tavoitteena. Tutkimus on tapaustutkimus, jonka pääasialliset lähteet ovat erilaisissa kokouksissa tuotettuja dokumentteja. Tutkija on osallistunut aktiivisesti projektityöhön, joten osa taustatiedoista perustuu tutkijan huomioihin sekä vielä keskusteluihin. Teoriaosassa käsitellään tietämyksen jakamista tietämyksen hallinnan ja virtuaalisuuden näkökulmasta. Muutoksen hallintaa on käsitelty lyhyesti tietämyksenhallintatyökalun käyttöönotossa. Tutkimus liittyy Stora Enso Consumer Boardsin tietämyksen hallintaprojektiin.

Generation of supercoils in nicked and gapped DNA drives DNA unknotting and postreplicative decatenation.

Due to the helical structure of DNA the process of DNA replication is topologically complex. Freshly replicated DNA molecules are catenated with each other and are frequently knotted. For proper functioning of DNA it is necessary to remove all of these entanglements. This is done by DNA topoisomerases that pass DNA segments through each other. However, it has been a riddle how DNA topoisomerases select the sites of their action. In highly crowded DNA in living cells random passages between contacting segments would only increase the extent of entanglement. Using molecular dynamics simulations we observed that in actively supercoiled DNA molecules the entanglements resulting from DNA knotting or catenation spontaneously approach sites of nicks and gaps in the DNA. Type I topoisomerases, that preferentially act at sites of nick and gaps, are thus naturally provided with DNA-DNA juxtapositions where a passage results in an error-free DNA unknotting or DNA decatenation.

Effect of aerobic exercise on skeletal muscle mitochondrial content and function in older adults

Regular aerobic exercise training, which is touted as a way to ameliorate metabolic diseases, increases aerobic capacity. Aerobic capacity usually declines with advanced age. The decline in aerobic capacity is typically associated by a decrease in the quality of skeletal muscle. At the molecular level, this decreased quality comes in part from perturbations in skeletal muscle mitochondria. Of particular is a decrease in the total amount of mitochondria that occupy the skeletal muscle volume. What is not well established is if this decrease in mitochondrial content is due to inactive lifestyle or the process of aging. Herein, the work of the thesis shows a clear connection between mitochondrial content and aerobic capacity. This indicates that active individuals with higher VChmax levels also contain higher volumes of mitochondria inside their muscle as opposed to sedentary counterparts who have lower levels of mitochondrial content. Upon taking these previously sedentary individuals and entering them into an aerobic exercise intervention, they are able to recover their mitochondrial content as well as function to similar levels of lifelong athletes of the same age. Furthermore, the results of this thesis show that mitochondrial content and function also correlate with exercise efficiency. If one is more efficient, he/she is able to expend less energy for a similar power output. Furthermore, individuals who increase in efficiency also increase in the ability to oxidize and utilize fat during pro-longed exercise. This increased reliance on fat after the intervention is associated with an increased amount of mitochondria, particularly in the intermyofibrillar region of skeletal muscle. Therefore, elderly adults who were once sedentary were able to recover mitochondrial content and function and are able to reap other health benefits from regular aerobic exercise training. Aging per se does not seem to be the culprit that will lead to metabolic diseases but rather it seems to be a lack of physical activity. -- Un entraînement sportif d'endurance, connu pour réduire le risque de développer des maladies métaboliques, augmente notre capacité aérobie. La capacité aérobie diminue généralement avec l'âge. Ce déclin est typiquement associé d'une diminution de la qualité du muscle squelettique. Au niveau moléculaire, cette diminution est due à des perturbations dans les mitochondries du muscle squelettique,, ce qui conduit à une diminution de la quantité totale des mitochondries présentes dans le muscle squelettique. Il n'a pas encore été établi si cette diminution de la teneur mitochondriale est due à un mode de vie sédentaire ou au processus du vieillissement. Ce travail de thèse montre un lien clair entre le contenu mitochondrial et la capacité aérobie. Il indique que des personnes âgées actives, avec des niveaux de V02max plus élevés, possèdent également un volume plus élevé de mitochondries dans leurs muscles en comparaison à leurs homologues sédentaires. En prenant des individus sédentaires et leur faisant pratiquer une activité physique aérobie, il est possible d'accroître leur contenu de même que leur fonction mitochondriale à des niveaux similaires à ceux d'athlètes du même âge ayant pratiqué une activité physique tout au long de leur vie. De plus, les résultats de ce travail démontrent que le contenu et la fonction mitochondriale sont en corrélation avec l'efficiscience lors d'exercice physique. En agumentant l'effiscience, les personnes sont alors capables de dépenser moins d'énergie pour une puissance d'exercice similaire. Donc, un volume mitochondrial accru dans le muscle squelettique, associé à une fonction mitochondriale améliorée, est associté à une augmentation de l'effiscience. En outre, les personnes qui augmentent leur effiscience, augmentent aussi leur capacité à oxyder les graisses durant l'exercice prolongé. Une augmentation du recours au graisses après l'intervention est associée à une quantité accrue de mitochondries, en particulier dans la région inter-myofibrillaire du muscle squelettique. Par conséquent, les personnes âgées autrefois sédentaires sont en mesure de récupérer leur contenu et leur fonction mitochondriale ainsi que d'autres avantages pour la santé grâce à un entraînement aérobie régulier. Le vieillissement en soi ne semble donc pas être le coupable conduisant aux maladies métaboliques qui semblent plutôt être lié à un manque d'activité physique.

Innovation process management of complex consumer products and services in new innovation paradigm – case location based business

Innovation is the word of this decade. According to innovation definitions, without positive sales impact and meaningful market share the company’s product or service has not been an innovation. Research problem of this master thesis is to find out what is the innovation process of complex new consumer products and services in new innovation paradigm. The objective is to get answers to two research questions: 1) What are the critical success factors what company should do when it is implementing the paradigm change in mass markets consumer business with complex products and services? 2) What is the process or framework one firm could follow? The research problem is looked from one company’s innovation creation process, networking and organization change management challenges point of views. Special focus is to look the research problem from an existing company perspective which is entering new business area. Innovation process management framework of complex new consumer products and services in new innovation paradigm has been created with support of several existing innovation theories. The new process framework includes the critical innovation process elements companies should take into consideration in their daily activities when they are in their new business innovation implementing process. Case company location based business implementation activities are studied via the new innovation process framework. This case study showed how important it is to manage the process, look how the target market and the competition in it is developing during company’s own innovation process, make decisions at right time and from beginning plan and implement the organization change management as one activity in the innovation process. In the end this master thesis showed that all companies need to create their own innovation process master plan with milestones and activities. One plan does not fit all, but all companies can start their planning from the new innovation process what was introduced in this master thesis.

Soil quality assessment through a multi-approach analysis in soils of abandoned terraced land in NE Spain

The abandonment of agricultural land in mountainous areas has been an outstanding problem along the last century and has captured the attention of scientists, technicians and administrations, for the dramatic consequences sometimes occurred due to soil instability, steep slopes, rainfall regimes and wildfires. Hidromorfological and pedological alterations causing exceptional floods and accelerated erosion processes has therefore been studied, identifying the cause in the loss of landscape heterogeneity. Through the disappearance of agricultural works and drainage maintenance, slope stability has resulted severely affected. The mechanization of agriculture has caused the displacement of vines, olives and corks trees cultivation in terraced areas along the Mediterranean catchment towards more economically suitable areas. On the one hand, land use and management changes have implicated sociological changes as well, transforming areas inhabited by agricultural communities into deserted areas where the colonization of disorganized spontaneous vegetation has buried a valuable rural patrimony. On the other hand, lacking of planning and management of the abandoned areas has produced badlands and infertile soils due to wildfire and high erosion rates strongly degrading the whole ecosystems. In other cases, after land abandonment a process of soil regeneration has been recorded. Investigations have been conducted in a part of NE Spain where extended areas of terraced soils previously cultivated have been abandoned in the last century. The selected environments were semi-abandoned vineyards, semi-abandoned olive groves, abandoned stands of cork trees, abandoned stands of pine trees, scrubland of Cistaceaea, scrubland of Ericaceaea, and pasture. The research work was focused on the study of most relevant physical, chemical and biological soil properties, as well as runoff and erosion under soils with different plant cover to establish the abandonment effect on soil quality, due to the peculiarity and vulnerability of these soils with a much reduced depth. The period of observation was carried out from autumn 2009 to autumn 2010. The sediment concentration of soil erosion under vines was recorded as 34.52 g/l while under pasture it was 4.66 g/l. In addition, the soil under vines showed the least amount of organic matter, which was 12 times lower than all other soil environments. The carbon dioxide (CO2) and total glomalin (TG) ratio to soil organic carbon (SOC) in this soil was 0.11 and 0.31 respectively. However, the soil under pasture contained a higher amount of organic matter and showed that the CO2 and TG ratio to SOC was 0.02 and 0.11 respectively indicating that the soil under pasture better preserves the soil carbon pool. A similar trend was found in the intermediate soils in the sequence of land use change and abandonment. Soil structural stability increased in the two soil fractions investigated (0.25-2.00 mm, 2.0-5.6 mm) especially in those soils that did not undergo periodical perturbations like wildfires. Soil quality indexes were obtained by using relevant physical and chemical soil parameters. Factor analysis carried out to study the relationship between all soil parameters allowed to related variables and environments and identify those areas that better contribute to soil quality towards others that may need more attention to avoid further degradation processes

Population ageing and ICT: An exploratory review of technology innovation trough digital applications

The multidimensional process of physical, psychological, and social change produced by population ageing affects not only the quality of life of elderly people but also of our societies. Some dimensions of population ageing grow and expand over time (e.g. knowledge of the world events, or experience in particular situations), while others decline (e.g. reaction time, physical and psychological strength, or other functional abilities like reduced speed and tiredness). Information and Communication Technologies (ICTs) can help elderly to overcome possible limitations due to ageing. As a particular case, biometrics can allow the development of new algorithms for early detection of cognitive impairments, by processing continuous speech, handwriting or other challenged abilities. Among all possibilities, digital applications (Apps) for mobile phones or tablets can allow the dissemination of such tools. In this article, after presenting and discussing the process of population ageing and its social implications, we explore how ICTs through different Apps can lead to new solutions for facing this major demographic challenge.

Challenges and Opportunities of Online Entertainment. Proceedings of the 7th International Conference on Internet, Law & Politics. Universitat Oberta de Catalunya, Barcelona, 9-10 July, 2012.

El VIII Congrés Internacional Internet, Dret i Política (IDP 2012) que s'ha dut a terme a Barcelona els dies 9 i 10 de juliol de 2012 sota el títol genèric de "Reptes i oportunitats de l'entreteniment en línia", ha abordat alguns dels principals reptes als que s'enfronta la societat de la informació des de la perspectiva jurídica i politològica. Concretament, els temes centrals han estat el debat sobre l'entreteniment a la xarxa, així com altres qüestions relacionades amb Internet i els drets de propietat intel·lectual, la privacitat, la seguretat o la llibertat d'expressió.

Approximation to the theory of affinities to manage the problems of the groupping process

New economic and enterprise needs have increased the interest and utility of the methods of the grouping process based on the theory of uncertainty. A fuzzy grouping (clustering) process is a key phase of knowledge acquisition and reduction complexity regarding different groups of objects. Here, we considered some elements of the theory of affinities and uncertain pretopology that form a significant support tool for a fuzzy clustering process. A Galois lattice is introduced in order to provide a clearer vision of the results. We made an homogeneous grouping process of the economic regions of Russian Federation and Ukraine. The obtained results gave us a large panorama of a regional economic situation of two countries as well as the key guidelines for the decision-making. The mathematical method is very sensible to any changes the regional economy can have. We gave an alternative method of the grouping process under uncertainty.

Calcium phosphate glasses: silanation process and effect on the bioactivity behavior of Glass-PMMA composites

This article presents the results of a study of the efficiency of silanation process of calcium phosphate glasses particles and its effect on the bioactivity behavior of glasspoly( methyl methacrylate) (PMMA) composites. Two different calcium phosphate glasses: 44.5CaO-44.5P2O5-11Na2O (BV11) and 44.5CaO-44.5P2O5-6Na2O-5TiO2 (G5) were synthesized and treated with silane coupling agent. The glasses obtained were characterized by Microprobe and BET while the efficiency of silanation process was determined using Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Thermal Analysis (DTA and TG)techniques. The content of coupling agent chemically tightly bond to the silanated glasses ascended to 1.69 6 0.02 wt % for BV11sil glass and 0.93 6 0.01 wt % for G5sil glass. The in vitro bioactivity test carried out in Simulated Body Fluid (SBF) revealed certain bioactive performance with the use of both silanated glasses in a 30% (by weight) as filler of the PMMA composites because of a superficial deposition of an apatite-like layer with low content of CO3 22 and HPO4 22 in its structure after soaking for 30 days occurred. VC 2013 Wiley Periodicals,Inc. J Biomed Mater Res Part B: Appl Biomater 00B: 000-000, 2013.

Role of references in international industrial marketing : a theory-building case study about supplier’s processes of utilizing references

Scientific studies regarding specifically references do not seem to exist. However, the utilization of references is an important practice for many companies involved in industrial marketing. The purpose of the study is to increase the understanding about the utilization of references in international industrial marketing in order to contribute to the development of a theory of reference behavior. Specifically, the modes of reference usage in industry, the factors affecting a supplier's reference behavior, and the question how references are actually utilized, are explored in the study. Due to the explorative nature of the study, a research design was followed where theory and empirical studies alternated. An Exploratory Framework was developed to guide a pilot case study that resulted in Framework 1. Results of the pilot study guided an expanded literature review that was used to develop first a Structural Framework and a Process Framework which were combined in Framework 2. Then, the second empirical phase of the case study was conducted in the same (pilot) case company. In this phase, Decision Systems Analysis (DSA) was used as the analysis method. The DSA procedure consists of three interviewing waves: initial interviews, reinterviews, and validating interviews. Four reference decision processes were identified, described and analyzed in the form of flowchart descriptions. The flowchart descriptions were used to explore new constructs and to develop new propositions to develop Framework 2 further. The quality of the study was ascertained by many actions in both empirical parts of the study. The construct validity of the study was ascertained by using multiple sources of evidence and by asking the key informant to review the pilot case report. The DSA method itself includes procedures assuring validity. Because of the choice to conduct a single case study, external validity was not even pursued. High reliability was pursued through detailed documentation and thorough reporting of evidence. It was concluded that the core of the concept of reference is a customer relationship regardless of the concrete forms a reference might take in its utilization. Depending on various contingencies, references might have various tasks inside the four roles of increasing 1) efficiency of sales and sales management, 2) efficiency of the business, 3) effectiveness of marketing activities, and 4) effectiveness in establishing, maintaining and enhancing customer relationships. Thus, references have not only external but internal tasks as well. A supplier's reference behavior might be affected by many hierarchical conditions. Additionally, the empirical study showed that the supplier can utilize its references as a continuous, all pervasive decision making process through various practices. The process includes both individual and unstructured decision making subprocesses. The proposed concept of reference can be used to guide a reference policy recommendable for companies for which the utilization of references is important. The significance of the study is threefold: proposing the concept of reference, developing a framework of a supplier's reference behavior and its short term process of utilizing references, and conceptual structuring of an unstructured and in industrial marketing important phenomenon to four roles.

The Emerging Human Rights Revolution: The Beginning of the Fifth Historical Process in the Consolidation of Human Rights

Emerging human rights are destined to modify, improve and transform a number of already traditional concepts so as to achieve greater guarantees and protection for the rights of individuals and collectivities. One of the big changes that will be brought about by the concept and conception of emerging human rights is that, following on from the processes of positivization, generalization, internationalization and specification, they represent the beginning of the fifth historical process in the consolidation of human rights, namely the process of interaction. A number of breakthroughs have already been achieved, such as the recognition of emerging biocultural rights in the recently adopted Nagoya Protocol on access to genetic resources and shared benefits.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

Performance Measurement of the Logistics Process

The objective of the thesis was to create a performance measurement system for the logistics process of a company. In addition, one goal was to make suggestions for improvements based on description and analysis of the process and current measures. The logistics process was described in detail, and the objectives for it were derived from the company strategy and goals. Suggestions for performance measurement system and process improvement were made based on current state analysis. As a result of the thesis, three new performance measures were decided to take into use. In addition, several improvements were suggested to the ERP system to make process smoother. Some of the improvements have already been added to the system and the rest will be added in the near future.

Customized agile development process for embedded software development

Agile software development has grown in popularity starting from the agile manifesto declared in 2001. However there is a strong belief that the agile methods are not suitable for embedded, critical or real-time software development, even though multiple studies and cases show differently. This thesis will present a custom agile process that can be used in embedded software development. The reasons for presumed unfitness of agile methods in embedded software development have mainly based on the feeling of these methods providing no real control, no strict discipline and less rigor engineering practices. One starting point is to provide a light process with disciplined approach to the embedded software development. Agile software development has gained popularity due to the fact that there are still big issues in software development as a whole. Projects fail due to schedule slips, budget surpassing or failing to meet the business needs. This does not change when talking about embedded software development. These issues are still valid, with multiple new ones rising from the quite complex and hard domain the embedded software developers work in. These issues are another starting point for this thesis. The thesis is based heavily on Feature Driven Development, a software development methodology that can be seen as a runner up to the most popular agile methodologies. The FDD as such is quite process oriented and is lacking few practices considered commonly as extremely important in agile development methodologies. In order for FDD to gain acceptance in the software development community it needs to be modified and enhanced. This thesis presents an improved custom agile process that can be used in embedded software development projects with size varying from 10 to 500 persons. This process is based on Feature Driven Development and by suitable parts to Extreme Programming, Scrum and Agile Modeling. Finally this thesis will present how the new process responds to the common issues in the embedded software development. The process of creating the new process is evaluated at the retrospective and guidelines for such process creation work are introduced. These emphasize the agility also in the process development through early and frequent deliveries and the team work needed to create suitable process.

Hallinnollinen sanktiointi

Tausta Suomessa lainsäätäjä reagoi helposti yhteiskunnalliseen häiriötekijään rikosoikeuden keinoin. Tästä on osoituksena se, että syksyllä 2010 varsinaisen rikoslain lisäksi rikoksesta oli säädetty 256 eri laissa. Suomalainen, lähtökohdiltaan maltillinen kontrolli- ja kriminaalipolitiikka on 1970-luvulla linjatun vastaisesti johtanut 2000-luvulle tultaessa rikosoikeudellisen kontrollin lisääntymiseen ja jopa kiristymiseen. Raja rikosten ja rikkomusten välillä on liudentunut ja paikoitellen kadonnut ja erityisesti turvallisuudesta on kehittynyt – käsitteeseen liittyvistä oikeudellisista jännitteistä huolimatta – keskeinen rikosoikeudellisen sääntelyn oikeutusperuste. Rikosoikeuden käyttäminen vähäisten rikosten kontrollointiin on aiheuttanut Suomeen viivästymisen ongelman. Yleisessä tiedossa on se, että Euroopan ihmisoikeustuomioistuin on antanut 2000-luvulla Suomelle kymmeniä tuomioita siksi, että rikosjuttuja on käsitelty viranomaisissa ja tuomioistuimissa liian kauan. Vähemmän on sen sijaan keskusteltu siitä, että myös vähäiset rikokset viivästyvät rikosoikeuden alan laajetessa ja viranomaisten voimavarojen ehtyessä. Suomessa ongelmaa on pyritty hoitamaan rikosoikeudellista toimivaltaa hallintoviranomaisille delegoimalla tilanteen ollessa nyt se, että uuden sakkomenettelylain voimaan tullessa noin 90 % rikosoikeudellisesta kompetenssista on poliisilla ja muilla hallintoviranomaisilla. Se taasen on ongelmallista perustuslain 3 §:ssä säädetyn vallanjakoperiaatteen kannalta. Välttämätöntä on korostaa myös sitä, että pääosin rikosoikeudelliseen kontrolliin perustuva systeemi aiheuttaa rikosoikeuden inflaatiota: rikosoikeuden arvostuksen vähenemisestä aiheutuvia ei-mittavissa olevia kuluja. Rikosoikeuden laajenemista vastaan esitetään kuitenkin harvoin kritiikkiä. Rikosoikeustieteen piirissäkään sille ei ole esitetty vakavasti otettavaa vaihtoehtoa. Esimerkiksi hallinnollisia sanktioita ei ole Suomessa – ei tosin muissa Pohjoismaissakaan – koettu rikosoikeuden vaihtoehtona, vaan usein rikosoikeutta täydentävänä järjestelmänä. Hallinnollisten sanktioiden käyttäminen rikosoikeuden ohessa ei ole ollut yksiselitteistä ja jäsenneltyä, yleisiin oppeihin perustuvaa. Kontrollin erityisille alueille, esimerkiksi sotilaskontrolliin, on lisäksi kehittynyt rikos- ja hallinto-oikeuden sekajärjestelmiä. Tutkimuskysymykset Käsillä olevassa artikkelimuotoisessa väitöskirjatutkimuksessa pyritään hahmottelemaan rikos- ja hallinto-oikeudellisten rangaistusjärjestelmien välisiä eroavaisuuksia Suomessa. Tutkimuksen keskeisin tehtävä on sen pohtiminen, millä tavalla 2010-luvulle tultaessa olisi tutkimuksen empiiriset ja teoreettiset lähtökohdat huomioon ottaen järkevää ja tarkoituksenmukaista rangaista. Tällä perusteella kehitetään yksikertaista hallintosanktiointiteoreettista mallia, että sitä hyväksikäyttäen lainvalmisteluprosessin sanktiointitilanteessa, sanktiosta päätettäessä, olisi mahdollista asettaa oikeusturvan vähimmäistakeet täyttävällä tavalla oikeus- ja muilta vaikutuksiltaan rationaalinen seuraamus sekä säätää sen määräämiseksi yhteiskunnallisilta vaikutuksiltaan tehokas ja riittävän oikeusturvallinen menettely. Tutkimustehtävä on tiivistetysti 1) hallinnollisten sanktioiden ja rikosoikeudellisten rangaistusten ja niiden alan määrittäminen, 2) hallinnollisten sanktioiden sääntelymallien valintaperusteluiden selvittäminen, 3) hallintosanktioteoreettisen mallin kehittäminen lainvalmisteluprosessia varten sekä 4) de lege ferenda -suositusten tekeminen rangaistavuuden hyväksyttävyyden ja joutuisuuden parantamiseksi. Menetelmä ja aineistot Tutkimus kytkeytyy teoreettisen rikosoikeustieteen, hallinto-oikeustieteen ja prosessioikeustieteen alalle ja se on luonteeltaan ongelmakeskeinen. Tieteenalojen väliset painotukset ja niiden vaikutus vaihtelevat tutkimuksessa. Vaikka tutkimus on monella tavalla luonteeltaan teoreettinen, siinä rakennetaan nimenomaan lainsäädäntötyötä ja lainvalmistelua tukevaa tutkimusta ja teoriaa. Tältä osin näkökulma liittyy kriminalisointiteoreettisessa tutkimuksessa hahmotettuun lainsäätäjän oikeuslähdeoppia koskevaan uuteen näkökulmaan, jolla on yhteyksiä lainsäädäntötutkimukseen ja oikeusteoriassa hahmotettuun legisprudence-tutkimusuuntaukseen, näkökulman suuntautuessa lainsäädäntötasolle. Tutkimuksen lähteistä suurin osa on oikeustieteellistä kirjallisuutta, jonka pääosa muotoutuu suomalaisesta oikeustieteellisestä kirjallisuudesta. Myös pohjoismaalaista, saksalaista ja hieman myös anglosaksista kirjallisuutta on käytetty. Kansainvälisten kirjallisuuslähteiden merkitys ei ole ollut merkittävä, koska kattava eurooppalainen näkemys aihepiiristä on pyritty saamaan Euroopan ihmisoikeustuomioistuimen ratkaisukäytäntöä hyödyntäen. Tutkimuksen lähteinä on käytetty laajasti myös kansallista lainvalmisteluaineistoa, erityisesti hallituksen esityksiä ja perustuslakivaliokunnan lausuntokäytäntöä. Johtopäätökset Kriminaali- ja/tai kontrollipolitiikassa on juuri nyt tärkeää pohtia, millä tavalla 2010-luvulle tultaessa on järkevää ja tarkoituksenmukaista rangaista. Tähän voisi olla mahdollista vastata tutkimuksessa kehitettävällä hallintosanktiointiteoreettisella mallilla. Mallin kehittäminen on edellyttänyt yhteiskunnallisten sanktiokäytäntöjen oikeusvaltioopillista tarkastelua, jolloin sanktioiden yhteiskunnalliseen merkitykseen pureutuminen kuvailee myös sitä, millainen modernin oikeusvaltion tila tällä hetkellä on. Perinteisten oikeusvaltioiden paradigmojen käyttäminen ei välttämättä edistä relevantin oikeusvaltiollisen sanktiointiteoreettisen mallin kehittämistä. Voi olla niinkin, että klassinen oikeusvaltio-oppi ja oletetunlaiset rikosoikeuden erityiset elementit eivät enää vastaa yhteiskuntatodellisuutta. Näin rankaisemisen yleiset opit voivat nousta kehittämisen kohteeksi oikeusvaltiollisuuden elementtien toteuttamiseksi valtavasta kasvaneessa hallintoyhteiskunnassa – hallinto-johtoisessa yhteiskunnallisessa todellisuudessa. Suomen rikoslaki sisältää laajassa merkityksessä sadoittain erilaatuisia kriminalisointeja, joiden merkitys on usein hallinnon toimintaa subventoiva, symbolinen tai jonkin toisen kriminalisoinnin vaikutusta tehostamaan pyrkivä. Tällainen rikoslaki on tehtävänsä, vaikuttavuutensa ja hyväksyttävyytensä kannalta ongelmallinen. Suomalainen hallinnollisten sanktioiden järjestelmä ei sekään ole järkevä ja tarkoituksenmukainen, yleisiin oppeihin perustuva systeemi. Myös yleiseurooppalainen kehitys näyttäisi viittaavan siihen, että Suomessa on tarve kehittää sekä rikosoikeutta että sille vaihtoehtoista hallintosanktioiden järjestelmää, sanktio-oikeutta. Tämä edellyttää lainsäädäntöuudistuksia.