Model-based study of a chemical-looping combustion process

Chemical-looping combustion (CLC) is a novel combustion technology with inherent separation of the greenhouse gas CO2. The technique typically employs a dual fluidized bed system where a metal oxide is used as a solid oxygen carrier that transfers the oxygen from combustion air to the fuel. The oxygen carrier is looping between the air reactor, where it is oxidized by the air, and the fuel reactor, where it is reduced by the fuel. Hence, air is not mixed with the fuel, and outgoing CO2 does not become diluted by the nitrogen, which gives a possibility to collect the CO2 from the flue gases after the water vapor is condensed. CLC is being proposed as a promising and energy efficient carbon capture technology, since it can achieve both an increase in power station efficiency simultaneously with low energy penalty from the carbon capture. The outcome of a comprehensive literature study concerning the current status of CLC development is presented in this thesis. Also, a steady state model of the CLC process, based on the conservation equations of mass and energy, was developed. The model was used to determine the process conditions and to calculate the reactor dimensions of a 100 MWth CLC system with bunsenite (NiO) as oxygen carrier and methane (CH4) as fuel. This study has been made in Oxygen Carriers and Their Industrial Applications research project (2008 – 2011), funded by the Tekes – Functional Material program. I would like to acknowledge Tekes and participating companies for funding and all project partners for good and comfortable cooperation.

Developing A Knowledge Management Process Model for Internal IT Organization, Case: Stora Enso Oyj, Corporate IT

The objectives of this Master’s Thesis were to find out what kind of knowledge management strategy would fit best an IT organization that uses ITIL (Information Technology Infrastructure Library) framework for IT Service Management and to create a knowledge management process model to support chosen strategy. The empirical material for this research was collected through qualitative semi-structured interviews of a case organization Stora Enso Corporate IT. The results of the qualitative interviews indicate that codification knowledge management strategy would fit best for the case organization. The knowledge management process model was created based on earlier studies and a literature of knowledge management. The model was evaluated in the interview research and the results showed that the created process model is realistic, useful, and it responds to a real life phenomenon.

Optical and microstructural properties of MgF2 UV coatings grown by ion beam sputtering process

The optical, mechanical, and microstructural properties of MgF2 single layers grown by ion beam sputtering have been investigated by spectrophotometric measurements, film stress characterization, x-ray photoelectron spectroscopy (XPS), x-ray diffraction, and transmission electron microscopy. The deposition conditions, using fluorine reactive gas or not, have been found to greatly influence the optical absorption and the stress of the films as well as their microstructure. The layers grown with fluorine compensation exhibit a regular columnar microstructure and an UV-optical absorption which can be very low, either as deposited or after thermal annealings at very low temperatures. On the contrary, layers grown without fluorine compensation exhibit a less regular microstructure and a high ultraviolet absorption which is particularly hard to cure. On the basis of calculations, it is shown that F centers are responsible for this absorption, whereas all the films were found to be stoichiometric, in the limit of the XPS sensitivity. On the basis of external data taken from literature, our experimental curves are analyzed, so we propose possible diffusion mechanisms which could explain the behaviors of the coatings.

The process of basic training, applied training, maintaining the performance of an observer

In the field of observational methodology the observer is obviously a central figure, and close attention should be paid to the process through which he or she acquires, applies, and maintains the skills required. Basic training in how to apply the operational definitions of categories and the rules for coding, coupled with the opportunity to use the observation instrument in real-life situations, can have a positive effect in terms of the degree of agreement achieved when one evaluates intra- and inter-observer reliability. Several authors, including Arias, Argudo, & Alonso (2009) and Medina and Delgado (1999), have put forward proposals for the process of basic and applied training in this context. Reid y De Master (1982) focuses on the observer's performance and how to maintain the acquired skills, it being argued that periodic checks are needed after initial training because an observer may, over time, become less reliable due to the inherent complexity of category systems. The purpose of this subsequent training is to maintain acceptable levels of observer reliability. Various strategies can be used to this end, including providing feedback about those categories associated with a good reliability index, or offering re-training in how to apply those that yield lower indices. The aim of this study is to develop a performance-based index that is capable of assessing an observer's ability to produce reliable observations in conjunction with other observers.

Games in Education and Process Development

The aim of the thesis is to devise a framework for analyzing simulation games, in particular introductory supply chain simulation games which are used in education and process development. The framework is then applied to three case examples which are introductory supply chain simulation games used at Lappeenranta University of Technology. The theoretical part of the thesis studies simulation games in the context of education and training as well as of process management. Simulation games can be seen as learning processes which comprise of briefing, micro cycle, and debriefing which includes observation and reflection as well as conceptualization. The micro cycle, i.e. the game itself, is defined through elements and characteristics. Both briefing and debriefing ought to support the micro cycle. The whole learning process needs to support learning objectives of the simulation game. Based on the analysis of the case simulation games, suggestions on how to boost the debriefing and promote long term effects of the games are made. In addition, a framework is suggested to be used in designing simulation games and characteristics of introductory supply chain simulation games are defined. They are designed for general purposes, are simple and operated manually, are multifunctional interplays, and last about 2.5 4 hours. Participants co operate during a game run and competition arises between different runs or game sessions.

A Fair and Secure Cluster Formation Process for Ad Hoc Networks

An efficient approach for organizing large ad hoc networks is to divide the nodesinto multiple clusters and designate, for each cluster, a clusterhead which is responsible forholding intercluster control information. The role of a clusterhead entails rights and duties.On the one hand, it has a dominant position in front of the others because it manages theconnectivity and has access to other node¿s sensitive information. But on the other hand, theclusterhead role also has some associated costs. Hence, in order to prevent malicious nodesfrom taking control of the group in a fraudulent way and avoid selfish attacks from suitablenodes, the clusterhead needs to be elected in a secure way. In this paper we present a novelsolution that guarantees the clusterhead is elected in a cheat-proof manner.

Branding and Marketing Communications of Lifestyle Prescription Drugs in a Strict Legislative Environment

This thesis discusses the different possibilities to brand and promote a patented prescription lifestyle drug through different marketing communications practices. This thesis aims in explaining how branding procedures can be built in circumstances, where the legislative environment is strickt and furthermore, the environment consists of both B-to-B and B-to-C market characteristics simultaneously.

El Papel de la motivación de los asesores y profesores en el proceso de asesoramiento = The figure of the motivation of the advisers and professors in the advice process

El escenario de asesoramiento colaborativo es un espacio sociocultural donde lo que se hace y se dice condiciona el tipo de interacción que se va a dar entre las personas que participan así como la actividad que llevan a cabo de manera conjunta. En este artículo vamos a reflexionar sobre el papel de la motivación de los profesores y asesores para mantener el asesoramiento así como en las posibilidades que tiene el asesor para crear y mantener un contexto que resulte motivante para asesor y asesorados

Gestão integrada de resíduos químicos em instituições de ensino superior

Since chemical residues management must be seriously considered at institutions of higher education and due to the relevance of this subject for students, this work proposes the involvement of the scientific community in the establishment of a program for management of chemical residues at universities, starting with a committee, to coordinate the process. The program should integrate the entire scientific community in an organized effort. The program involves legislative, educational and environmental management aspects, with environmental education as an important tool to integrate all the administrative areas of a chemistry department.

Conversioni al cattolicesimo a Roma tra Sei e Settecento. La presenza degli scandinavi nell’Ospizio dei Convertendi.

In my PhD dissertation, I have examined a group of people of Scandinavian origin received by Ospizio dei Convertendi. This group has been hitherto largely unknown to historical research. The Ospizio was an institute founded by the Oratorian Congregation in Rome in 1673 to provide religious instruction and material aid to both recent and aspirant converts to Roman Catholicism. My research traces the profile of converts and a typology of motives, examining different factors which influenced the conversion process. I show that the key factors were often of a social rather than a religious nature. Moreover, I have analyzed the hospice in the context of Counter-Reformation charity as well. In terms of numbers, the Scandinavians formed a somewhat marginal yet not insignificant group within the Roman hospice. Out of a total of 2203 guests received between 1673 and 1706, 4.6 % were Scandinavians: 74 Swedes (including Finland and Livonia) and 27 Danes (including Norway). They came from a rigorously Protestant region which reacted to Catholicism with severe legislative measures. Converts to Catholicism risked confiscation of their goods, expulsion or even capital punishment. Since both Sweden and Denmark were practically impenetrable to Catholicism at the time and clandestine missionary attempts often failed before they had even properly started, the Roman Catholic Church shifted its interest towards Northerners arriving in Rome, a preferred destination for young noblemen, artists and migrant craftsmen. The material related to Ospizio dei Convertendi, conserved in the Vatican archives, is a scarcely known yet unusually rich source, not only for the religious history of our continent, but also for social history and the study of migration in early modern Europe. It contains a wealth of information about members of the subordinate classes, of their travels and lives in Europe. The profile delineated in these documents is of individuals who had a wide range of different professions and different aspirations. These documents encompass a vast social spectrum that was highly mobile on a continent which by that time had become pluriconfessional. Therefore, these migrants faced the complex religious reality in their everyday life. The principal corpus of my research consists of two types of manuscript sources created for administrative and in a way also for apologetic purposes of the Roman Catholic Church. My starting point is the Primo registro generale of Ospizio dei Convertendi. This is a volume in which the following information about each guest was registered: name, nationality, city of origin, age, sex, profession, confession professed before converting, date of arrival, departure, abjuration and baptism. Typically, the convert was male, originating from Stockholm or Copenhagen, from 21 to 30 years of age. The biggest occupational groups in descending order were soldiers, noblemen, craftsmen and sailors. Thus the data reflects a multiform reality of interurban and long distance migration, ideals regarding the education of young noblemen and gentry as well as the need of European armies to hire foreign mercenaries in their various campaigns. Against this background the almost total absence of women is hardly surprising: there is only one woman in the material I have studied. The second main source, Nota degl’ospiti ricevuti e spese fatte per essi, sheds more light on the choices of the converts, their motivations and their lives outside Scandinavia before reaching Rome. This narrative material permits an analysis which completes but also goes far beyond the columns of the Institute’s general register. This material consists of reports written by Catholic priests based on an interview conducted upon each guest’s arrival. The material frequently includes information on what the converts would do following their departure from the Institute as well. These sources have a specific narrative form and contain short biographies, list reasons for converting and information about the journey from the North to the Mediterranean - a journey which in many cases took several years. Moreover, they show that certain unorthodox practices such as calling on the saints and pleading for help from them were not uncommon in the Protestant popular religion. The recording of information on conversions from Protestantism to Catholicism reflects both religious and social interest on the part of the receiving institute. The information obtained was used for the purposes of religious teaching, for finding adequate ways of inserting the convert into Italian society so that he could earn a living, and to find effective methods to convert others with a similar cultural and geographical background. The stories recorded were based on interviews with the newly-arrived, information obtained from a travel companion or fellow countrymen, or from written documents the aspirant converts carried with them. These sources illustrate, although sometimes in rather simplified ways, the circumstances and motivations which were relevant to the choice of changing one’s confession. In addition, I have examined petitions addressed to the hospice and other Roman authorities in order to get financial aid. These petitions were written by Italian scrittori, and they contain certain conventions and topoi of presenting the conversion with the purpose of improving the chances of obtaining financial aid. It is through these filters, which may seem initially almost invisible, that the remote voice of the converts reaches us. The results of the analysis are particularly interesting because they disagree with some of the principal conclusions of previous work on the subject. First, earlier research has focused almost exclusively on the conversions of noblemen, and has argued, second, that the Queen Christina of Sweden was the driving force behind their change of confession. The sources examined for this dissertation present a profile of long-distance migrants, many of them members of the subordinate classes, who were looking for ways to make their living in Europe. These people had in many cases left their country of origin several years earlier and not for religious reasons, so, crucially, we are not dealing with confessional migration in these cases. Rather, conversion was a complex process, intricately tied up with strategies of survival, integration and upward social mobility. At the same time, while these components are significant on their own right, they do not necessarily point to the absence of motivations of a more clearly religious nature.

Biochemical properties of Bacillus sp. ITP-001 lipase immobilized with a sol gel process

This work presents biochemical characterization of a lipase from a new strain of Bacillus sp. ITP-001, immobilized using a sol gel process (IB). The results from the biochemical characterization of IB showed increased activity for hydrolysis, with 526.63 U g-1 at pH 5.0 and 80 ºC, and thermal stability at 37 ºC. Enzymatic activity was stimulated by ions such as EDTA, Fe+3, Mn+2, Zn+2, and Ca+2, and in various organic solvents. Kinetic parameters obtained for the IB were Km = 14.62 mM, and Vmax = 0.102 mM min-1 g-1. The results of biochemical characterization revealed the improved catalytic properties of IB.

Determination of sulfate in the wet-process of phosphoric acid by reverse flow injection

An improved method based on reverse flow injection is proposed for determining sulfate concentration in the wet-process of phosphoric acid (WPA). The effect of reagent composition, flow rate, temperature, acid concentration, length of the reaction coil, and linear response range on the flow system is discussed in detail. Optimal conditions are established for determining sulfate in the WPA samples. Baseline drift is avoided by a periodic washing step with EDTA in an alkaline medium. A linear response is observed within a range of 20 - 360 mg L-1, given by the equation A = 0.0020C (mg L-1) + 0.0300, R² = 0.9991. The detection limit of the proposed method for sulfate analysis is 3 mg L-1, and the relative standard deviation (n = 12) of sulfate absorbance peak is less than 1.60%. This method has a rate of up to 29 samples per hour, and the results compare well with those obtained with gravimetric method.

THE ROLE OF NANOMATERIALS IN COSMETICS: NATIONAL AND INTERNATIONAL LEGISLATIVE ASPECTS

Nanotechnology is currently one of the fastest growing scientific fields. The products of this science have become part of our everyday lives. However, to date, regulatory agencies have not yet established a single definition for nanomaterials and nanotechnology. Therefore, each country has its own definitions and legislation to control products containing nanomaterials. Being relatively new materials, there are no long-term studies showing their impact on human health and the environment. Consequently, countries control the amount of nanomaterials present in cosmetics, allowing the end consumer to choose which cosmetic to use, by choosing products with or without nanomaterials. Therefore, the primary objective of this study was to identify the most used nanomaterials in cosmetics and verify whether these formulations are in accordance with the laws in force in the United States, the European Union and Brazil, thereby determining if the cosmetics on the market are in line with the existing laws in these three economic powers. This study is unique and will contribute to furthering the discussion on existing laws pertinent to the use of nanotechnology in cosmetics.

Performance Measurement of the Logistics Process

The objective of the thesis was to create a performance measurement system for the logistics process of a company. In addition, one goal was to make suggestions for improvements based on description and analysis of the process and current measures. The logistics process was described in detail, and the objectives for it were derived from the company strategy and goals. Suggestions for performance measurement system and process improvement were made based on current state analysis. As a result of the thesis, three new performance measures were decided to take into use. In addition, several improvements were suggested to the ERP system to make process smoother. Some of the improvements have already been added to the system and the rest will be added in the near future.

Potentials of process intensification in the Finnish petrochemical industry

This research was motivated by the need to examine the potential application areas of process intensification technologies in Neste Oil Oyj. According to the company’s interest membrane reactor technology was chosen and applicability of this technology in refining industry was investigated. Moreover, Neste Oil suggested a project which is related to the CO2 capture from FCC unit flue gas stream. The flowrate of the flue gas is 180t/h and consist of approximately 14% by volume CO2. Membrane based absorption process (membrane contactor) was chosen as a potential technique to model CO2 capture from fluid catalytic cracking (FCC) unit effluent. In the design of membrane contactor, a mathematical model was developed to describe CO2 absorption from a gas mixture using monoethanole amine (MEA) aqueous solution. According to the results of literature survey, in the hollow fiber contactor for laminar flow conditions approximately 99 % percent of CO2 can be removed by using a 20 cm in length polyvinylidene fluoride (PDVF) membrane. Furthermore, the design of whole process was performed by using PRO/II simulation software and the CO2 removal efficiency of the whole process obtained as 97 %. The technical and economical comparisons among existing MEA absorption processes were performed to determine the advantages and disadvantages of membrane contactor technology.