Corporate sustainability reporting for water : water footprint, global reporting initiative and the water accounting framework

Three initiatives with respect to water reporting in the mining sector are compared in this paper to understand the quantities that are asked for by each initiative and the guidelines of those initiatives through means of a case study. The Global Reporting Initiative (GRI) was chosen because it has achieved widespread acceptance amongst mining companies and its water-related indicators are widely reported in corporate sustainability reporting. In contrast, the Water Footprint Network, which has been an important initiative in food and agricultural industries, has had low acceptance in the mining industry. The third initiative is the Water Accounting Framework, a collaboration between The Minerals Council of Australia and the Sustainable Minerals Institute of the University of Queensland. A water account had previously been created according to the Water Accounting Framework for the case study site, an open pit coal mine in the Bowen Basin. The resulting account provided consistent data for the Global Reporting Initiative (GRI) and the Water Footprint attributable to mining but in particular, a deficiency in the GRI indicator of EN10 reuse and recycling efficiency was illustrated quantitatively. This has far-reaching significance due to the widespread use of GRI indicators in mining corporate reports.

Industry based rehabilitation and closure knowledge management system : scoping study

The Central Queensland Mine Rehabilitation Group (CQMRG) has hosted mine site rehabilitation inspections combined with technical workshops for more than 20 years. It was recognised at CQMRG's anniversary meeting in April 2013 that the vast body of knowledge held by rehabilitation and closure planning practitioners was being lost as senior rehabilitation experts retire from the industry. It was noted that even more knowledge could be readily lost unless a knowledge management platform was developed to capture, store and enable retrieval of this information. This loss of knowledge results in a significant cost to industry. This project was therefore undertaken to review tools which have the capability to gather the less formal knowledge as well as to make links to existing resources and bibliographic material. This scoping study evaluated eight alternative knowledge management systems to provide guidance on the best method of providing the industry with an up-to-date, good practice, knowledge management system for rehabilitation and closure practices, with capability for information sharing via a portal and discussion forum. This project provides guidance for a larger project which will implement the knowledge management system to meet the requirements of the CQMRG and be transferrable to other regions if applicable. It will also provide the opportunity to identify missing links between existing tools and their application. That is, users may not be aware of how these existing tools can be used to assist with mine rehabilitation planning and implementation and the development of a new platform will help to create those linkages. The outcomes of this project are directed toward providing access to a live repository of rehabilitation practice information which is Central Queensland coal mine-specific, namely: highlighting best practice activities, results of trials and innovative practices; updated legislative requirements; links to practices elsewhere; and informal anecdotal information relevant to particular sites which may be of assistance in the development of rehabilitation of new areas. Solutions to the rehabilitation of challenging spoils/soils will also be provided. The project will also develop a process which can be applied more broadly within the mining sector to other regions and other commodities. Providing a platform for uploading information and holding discussion forums which can be managed by a regional practitioner network enables the new system to be kept alive, driven by users and information needs as they evolve over time. Similar internet-based platforms exist and are managed successfully. The preferred knowledge management system will capture the less formal and more difficult to access knowledge from rehabilitation and mine closure practitioners and stakeholders through the CQMRG and other contributors. It will also provide direct links, and greater accessibility, to more formal sources of knowledge with anticipated cost savings to the industry and improved rehabilitation practices with successful transitioning to closure and post-mining land use.

Automation of underground truck haulage

This paper reviews the state-of-the-art in the automation of underground truck haulage. Past attempts at automating LHDs and haul trucks are described and their particular strengths and weaknesses are listed. We argue that the simple auto-tramming systems currently being commercialised, that follow rail-type guides placed along the back, cannot match the performance, flexibility and reliability of systems based on modern mobile robotic principles. In addition, the lack of collision detection research in the underground environment is highlighted.

A crop productivity research protocol for long wall mining

Springsure Creek Coal (SCC) intends to develop a coal mine using the long wall mining process under grain farming land near Emerald in Central Queensland (CQ). While this technology will result in some subsidence of the land surface, SCC wishes to maintain productivity of the grain cropping land in the precinct after coal mining. However, the impact of the surface subsidence resulting from that mining process on productivity of cropping land in any Australian landscape is currently unclear. A research protocol to investigate the impacts of subsidence on grain productivity for when the SCC project becomes operational is proposed. The protocol has wider application for other similar mining projects throughout the country. A copy of the full report is accessible on www.aginstitute.com.au.

Quantification of the inevitable: the influence of soil macrofauna on soil water movement in rehabilitated open-cut mined lands

Recolonisation of soil by macrofauna (especially ants, termites and earthworms) in rehabilitated open-cut mine sites is inevitable and, in terms of habitat restoration and function, typically of great value. In these highly disturbed landscapes, soil invertebrates play a major role in soil development (macropore configuration, nutrient cycling, bioturbation, etc.) and can influence hydrological processes such as infiltration, seepage, runoff generation and soil erosion. Understanding and quantifying these ecosystem processes is important in rehabilitation design, establishment and subsequent management to ensure progress to the desired end goal, especially in waste cover systems designed to prevent water reaching and transporting underlying hazardous waste materials. However, the soil macrofauna is typically overlooked during hydrological modelling, possibly due to uncertainties on the extent of their influence, which can lead to failure of waste cover systems or rehabilitation activities. We propose that scientific experiments under controlled conditions and field trials on post-mining lands are required to quantify (i) macrofauna–soil structure interactions, (ii) functional dynamics of macrofauna taxa,and (iii) their effects on macrofauna and soil development over time. Such knowledge would provide crucial information for soil water models, which would increase confidence in mine waste cover design recommendations and eventually lead to higher likelihood of rehabilitation success of open-cut mining land.

榆神府煤田开采对地下水和植被的影响

在简要说明榆神府矿区生态脆弱性和煤田开发对我国国民经济发展的重要性基础上,概述了矿区生态环境的现状、地下水的基本特征、采煤对地下水和植被的影响、以及矿区地下水与植被的相互关系;说明地下水资源是支撑矿区生态环境可持续发展的重要因子,采煤对地下水的破坏会严重影响矿区植被的恢复与重建;指出了目前矿区地下水与植被互动关系研究的不足,并提出了今后该领域应着重研究的方向.

神府东胜煤田复垦区土壤入渗特性的试验研究

土壤入渗性能是最基本的土壤物理特性之一。复垦区土壤的结构组成复杂,入渗特性有别于非矿区土壤。本文以神府东胜煤田马家塔复垦区为研究对象,利用圆盘入渗仪分别测定了复垦区乔木、林地、荒地、灌木林地和草地的土壤入渗特性,用经典统计学方法对复垦区土壤入渗性能的空间变异性进行了分析。实测结果表明,不同土地利用方式下的土壤入渗特性有较大的差异;在测定范围内,乔木林地、荒地、草地和灌木林地的稳定入渗率均表现出0 cm>—3 cm>—15 cm的规律性,其中草地稳定入渗率随吸力的变化更明显。研究表明:乔木林地稳定入渗率和累积入渗量的变异系数分别为0.58和0.49.属于中等变异。

KEL-TI介质的地震波场响应与成像方法研究

To deal with the problems in multi-component converted seismic wave exploration in coal fields, the wave propagating features and imaging methods of multi-component converted waves in coal measure strata are researched in this thesis firstly. The relations between viscoelasticity and anisotropy in coal measure strata are analyzed to build KEL-TI model, and which seismic wave propagating and attenuating features are researched. The disadvantages of converted wave imaging methods based on common converted point gather are analyzed and constant velocity no NMO converted wave imaging method based on common scattering point gather is put forward, according to Huygens-Fresnel principle, which applicabilities in the elastic isotropic, elastic TI and KEL-TI situations are discussed. To different model simulation data, the common scattering point gathers’ and stacked profiles’ features are analyzed. The results show that the method can image compressional waves and converted waves with high precision. Secondly, the resolution enhancing theories and methods of converted wave are researched by Rayleigh wave suppressing, converted wave static correction and poststack inverse-Q filtering. 1) The polarization filter is designed by the instantaneous polarization information of seismic waves, and the Rayleigh wave suppressing method is researched. From the spectrum analysis before and after filtering, it can be derived that the amplitudes are kept relatively. 2) To constant velocity no NMO converted wave imaging method, the static correction method based on common equivalent offset point gather is put forward and tested to the actual converted waves. 3) The relation between equivalent quality factor of converted wave, compressional wave quality factor and the ratio of compressional to shear wave velocity is derived. The compressional wave quality inversion method by first arrivals of none-offset VSP is researched, and which is then transformed to the equivalent quality factor to perform inverse-Q filtering of actual converted waves. The result has shown that the method can recover the high frequency energy of converted waves. At last, the theories and methods researched in this thesis are practiced to the 3D3C seismic exploration in Guqiao coal mine in Huainan and achieve good results.

煤系地层三维三分量地震数据解释方法研究

Conventional 3D seismic exploration cannot meet the demand of high yield and high efficiency safe production in coal mine any more. Now it is urgent to improve the discovery degree of coal mine geological structures for coal production in China. Based on 3D3C seismic exploration data, multi-component seismic information is fully excavated. First systematic research on 3D3C seismic data interpretation of coal measure strata is carried out. Firstly, by analyzing the coal measure strata, the seismic-geologic model of coal measure strata is built. Shear wave logging is built by using regression analysis. Horizon calibration methods of PP-wave and PS-wave are studied and the multi-wave data are used together to interpret small faults. Using main amplitude analysis technology, small faults which cannot be found from PP-wave sections can be interpreted from the low frequency PS-wave sections. Thus, the purpose to applying PS-wave data to fine structure assistant interpretation is achieved. Secondly, PP- and PS-wave post-stack well constrained inversion methods of coal measure strata are studied. Joint PP- and PS-wave post-stack inversion flow is established. More attribute parameters, which are applied in fine lithology interpretation of coal measure strata, are obtained from combinations of the inversion results. Exploring the relation between rock with negative Poisson’s ratio and anisotropy, fracture development in coal seam are predicted. Petrophysical features of coal measure strata are studied, and the relations between elastic parameters and lithology, fluid and physical properties are established. Inversions of the physical parameters such as porosity, permeability and water saturation, which reflect lithology and fluid property, are obtained. Finally, the approaches of shear wave splitting and Thomsen parameters inversion, which provide new ideas for seismic anisotropy interpretation of coal measure strata, are studied to predict fracture development. The results of practical application indicate that the methods in this paper have good feasibility and applicability. They have positive significance for high yield and high efficiency safe production in coal mine.

内陆湖沼相和近海沼泽相沉积环境煤中微量元素和矿物的对比研究—以辽宁北票、江西建新和桥头煤研究为例

Using knowledge of geology, geochemistry, coal petrology, mineralogy, by means of a variety of advanced measuring methods such as inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled atomic emission spectrometry (ICP-AES), X-ray powder diffraction (XRD), scanning electron microscopy with energy-dispersive spectrometer(SEM-EDS), sequential chemical extract and density fractions, the characteristics of trace elements and minerals in Jurassic Beipiao coal mine under inland limnetic sedimentary environment and in late Permian Jianxin and Qiaotou coal mines under paralic swamp sedimentary environment were studied. Compared with the average concentration in the world bituminous coals, the Beipiao coal was characterized by relatively high contents of Sc, Ti, Cr, Co, Ni, Zn, Se, Sr, Zr, Y, Ba, REE and Th, and lower contents of V, Rb, Cd, Sn, Pb, Bi and U; while the Jianxin coal was relatively enriched in Li, Sc, Ga, Sr, Y, Nb, Sb, Th and U, with low concentration of Be, Co, Ni, Cu, Ge, Zr, Mo, Cd, Cs, Ba, Pb and Bi; and the Qiaotou coal was enriched in Li, Sc, Sr, Nb, Ta, Zr, REE, Hf, Th and U, with low concentration of Be, V, Co, Ni, Cu, Ge, Mo, Cd, Cs, Ba, Tl, Pb and Bi. The concentrations of Ca, Mg and K in Beipiao coal are higher than those in Jianxin coal and Qiaotou coal, while Fe, S and Ti in Beipiao coal are lower than those in Jianxin coal and Qiaotou coal. The proximate analysis of coal samples was carried out, which indicated that Beipiao coal was medium- to high- ash (5.92-60.68%) with low sulphur coal, and Jianxin coal and Qiaotou coal was medium to high ash (8.85-46.33%) with high sulphur. The reflectivity was measured, which explained that Beipiao coal belonged to high volatile bituminous coal, Jianxin coal was low volatile bituminous coal and Qiaotou coal was low volatile anthracite. Quantitative maceral analyses were studied. The characteristics of rare earth elements (REE) were investigated, which showed that the total contents of REE were higher than that of the world's average content. With the increase of coal's metamorphic grade, the total contents of REE decreased from 98.5 X 10"6 of Beipiao coal to 94.2 X 10"6 of Jianxin coal, and to 75.9 X 10"6 of Qiaotou coal, and 5Eu reduced which indicated that the element Eu depleted. The characteristics of REE was controlled by the metamorphic grade of coal. And REE were mainly absorbed in clay minerals in Beipiao coal samples, while in Jianxin and Qiaotou coal mines, REE were primarily related to clay mineral and pyrite. The variation of trace elements in vertical direction of coal seams was studied, and the results showed that different trace elements differed greatly. The correlation between trace elements and ash were determined. Four major trace elements (aluminium-silicates, sulphide, carbonate and phosphate) accounted for the occurrence and distribution of most elements studied were determined. Coal samples were separated by density fraction, which showed that Cr, Cu, Mo and Pb were closely related to inorganic matters mainly distributed in P >2.6 and dropped remarkably in the density fractions P <2.3 . The occurrences of Co, Cr, Ni, As, Se, Mo, U were studied directly and quantitatively using sequential chemical extract with six steps, which showed that Co. Ni, Mo and U were mainly in the form of mineral, and As, Se chiefly in the form of organic state, while Cr mostly in the form of organic state and mineral. Major mineral phases presented in the Beipiao coal were Kaolinite, illite, quartz, calcite, and small amount of siderite, barite. While major mineral phases in Jianxin and Qiaotou coal were pyrite, kaolinite, and small amount of marcasite, rutile, sphalerite. This is the first time that the chromite in the coal was discovered in China, which indicates that Cr occurrence appeared in the form of chromite. The ratio of Sr/Ba, Sr/Ca and V/Ni in Beipiao coal mine under inland limnetic is smaller than that of in Jianxin and Qiaotou coal mines under paralic swamp. The ratio of K/Na and Th/U of Beipiao coal mine is higher than that of Jianxin and Qiaotou coal mine, which proved that Beipiao coal was not affected by sea water and Jianxin and Qiaotou coal were affected by sea water. Trace elements such as Cr, Ni, Mo in minerals were analyzed by SEM-EDS. The factors controlling the enrichment of trace elements can be divided into syngenetic stage factors and epigenetic stage factors.

K/E之交环境地球化学元素的演化与全球变化及恐龙绝灭的关系-以黑龙江中下游地区和俄罗斯远东地区为例

In this paper, We analyzed the geological and geographical settings of dinosaurs extinction at the end of Cretaceous, especially the effect of the change of the elements contents on dinosaurs extinction. We studied basis on the two typical sections-Cretaceous-Paleocene boundary (Baishantou section (in Jiayin, Heilongjiang province of China) and Arkhara-Boguchan Coal Mine section (in Far East of Russian)) and Longgushan section (in Jiayin, Heilongjiang province of China) mainly. This work provided some evidences for forecasting the effects of global environmental change on bio-circle. The followings are the primary gains: According to the paleo-climate indexes (CaO/MgO,Sr/Ba) and the results of Factor Analysis, we found that there were similar climate in Baishantou section and Arkhara-Boguchan Coal Mine section near the K/E boundary, and both of them took on the trend of temperature declining and precipitation heightening after transitory high-temperature and drought. There are similar change and evlution rule of the elements contents near the boundary in the both sections (Baishantou section and Arkhara-Boguchan Coal Mine section). Both iron group elements and chalcophile elements appeared obvious abnormity. There are not visible correlation between the change of elements contents and climate indexes. This shows that the elements abnormity maybe came from the factors excluding climate or the factors were too many to conceal the influence of climate. --The result of cluster analysis showed that the boundary between BST3-8 and BST3-9 may be the K/E boundary of Baishantou section, and the top of twofold coal were the K/E boundary of Arkhara-Boguchan Coal Mine section which was consistent with accepted conclusion formerly. By contrast of elements contents in dinosaur bones and general organism, in surrounding rock and general sand stone, the regulation of the change of elements contents in dinosaur bones and surrounding rock, we confirmed that dinosaur extinction in Jiayin were relative with the high abnormities of Sr, Ba, Pb, Cr and the low abnormity of Zn, at least, it was them which speeded up dinosaurs extinction. After a series of analysis, we concluded that dinosaurs extinction of this areas tied up with the relative high background values of geo-chemical elements , paleo-climate and disaster incidents. First of all, high background values provided the necessary condition for the accumulation of the elements. Secondly, the drought climate adverse to the survival of dinosaurs, and led them to extinct gradually. finally, disaster incidents, the eruption of volcano or the collision of aerolites, made them exit this planet.

Impacto del proceso de eliminación del doble conteo del material importado por Carbones del Cerrejón Limited en términos de eficiencia y efectividad en el proceso de nacionalización y liberación del material

La operación de mega minería que abarca CERREJON se desarrolla bajo lo más altos estándares de seguridad y calidad, con el compromiso de entregar al mercado un excelente producto y evitando el deterioro del entorno. Uno de los puntos más fuertes de la compañía se haya en la integración de los procesos productivos entre la mina de carbón, el ferrocarril y el puerto, logrando que la operación sea eficiente y que garantice niveles altos de óptimos resultados y que los porcentajes de falla no existan o cada vez sean menores en el proceso de explotación y transporte del carbón de Colombia hacia el mundo. El departamento de MATERIALES es el punto de origen para garantizar que se desarrolle la operación, dado que el departamento tiene la gran labor de adquirir y entregar los bienes y servicios requeridos por la Compañía al más bajo costo total evaluado, en el menor tiempo posible y bajo el marco de la legislación Colombiana en el proceso de nacionalización, con un alto énfasis en el desarrollo de relaciones fuertes y sinérgicas entre todos los eslabones de la cadena. Todo el proceso del departamento se enmarca dentro de un ciclo que debe encaminarse a ser cada vez más efectivo y eficiente; de allí que se busquen opciones de mejoramiento para afinar los procesos. Para que sea posible y factible manejar una mega operación como esta se requiere afinar al máximo la red que se establece en su cadena de abastecimiento, buscando lograr un flujo de producto, información y fondos que garanticen disponibilidad del producto, para así generar una rentabilidad alta a la compañía, y controlar los costos por la operación. Dado que la cadena de suministro es susceptible a mejoras, gracias a la interacción con los proveedores, colaboradores y clientes; se pretende sacar el mejor provecho de esto, a través del análisis de la cadena actual de CERREJON; presentando una opción de mejora en uno de los eslabones del proceso productivo, esta opción ha sido contemplada desde años anteriores, pero en esta ocasión gracias a la integración de afinamientos en los sistemas de información, y la participación activa de los proveedores, se encuentra una opción viable de la eliminación de un reproceso, que garantiza eficiencia y efectividad en la agilización del ciclo de producción en CERREJON. A través de la ejecución del proyecto de reforma del conteo, se presenta la oportunidad de mejoramiento en la cadena del departamento; el proceso de reconteo en la mina, realizado posteriormente al conteo inicial en Puerto Bolívar, de los materiales que llegan importados vía marítima. El proceso de afinamiento del recibo documental en el consolidador de carga y los mayores proveedores de entrega directa (HITACHI y MCA) al transportador, genera la opción del uso de terminales portátiles, que de la mano con los ajustes documentales, permitirán que la carga sea contada y separada por localización, para enviarla vía tren a LMN, reduciendo tiempo de entrega al cliente final, los costos de remanejo al volver a contar, y los costos asociados a las entregas no oportunas de devolución de contenedores.

Exposición acumulada de polvo respirable como predictor de enfermedad respiratoria

En la minería de carbón se presenta exposición prolongada a polvo de carbón y a polvo de sílice en diferentes porcentajes, encontrándose una asociación con las alteraciones obstructivas, bronquitis crónica, Neumoconiosis de los trabajadores de carbón y Silicosis. Se han establecido varias formas de estimar el riesgo de desarrollar dichas enfermedades respiratorias no malignas secundarias a la exposición a estos polvos (carbón y sílice) en el ámbito ocupacional, siendo el cálculo de la exposición acumulada, la que ha demostrado mayor utilidad. Con el fin de establecer el riesgo de desarrollar alteraciones funcionales, a partir de la exposición acumulada de polvo respirable - y en los trabajadores de una empresa de minería a cielo abierto en Colombia, se estructuró este estudio de cohorte. Se contó con el registro de 566 trabajadores distribuidos en 29 Grupos de Exposición Similar (GES). El cálculo de la dosis acumulada se realizó considerando las medianas de exposición para cada GES y el tiempo de exposición de cada trabajador. Y posteriormente se estimó el riesgo empleando una regresión de poisson con varianza robusta. Los resultados más importantes del estudio muestran la exposición acumulada en niveles inferiores a los reportados en la literatura, sin embargo se encuentra un riesgo ligeramente elevado, IRR 1.000124 (IC95% 1 - 1.000248) en los expuestos, estimando que por cada unidad de medición de la exposición acumulada que se incremente, el riesgo de que aparezca una alteración respiratoria funcional se incrementa en 1.000124 veces entre los trabajadores expuestos y los no expuestos.

Síntomas respiratorios y neumoconiosis por polvo de carbón diagnosticada radiológicamente, en los trabajadores de minería subterránea en Boyacá en el año 2014

Introducción Las neumoconiosis son un grupo de enfermedades respiratorias ocupacionales, debidas a la acumulación de polvo en los pulmones. Colombia pese a ser un país minero, no cuenta con datos oficiales sobre la prevalencia de la neumoconiosis que permitan implementar medidas preventivas para evitar el desarrollo de enfermedades asociadas a la explotación minera y que disminuyan la incidencia y prevalencia de la neumoconiosis. Objetivos Determinar la prevalencia de neumoconiosis a partir del diagnóstico radiológico y describir síntomas respiratorios referidos por los trabajadores de las minas subterráneas de carbón en el departamento de Boyacá. Materiales y métodos Se realizó un estudio descriptivo de corte transversal en 232 trabajadores de minería subterránea del departamento de Boyacá; teniendo como fuente de información los datos obtenidos en el proyecto “Evaluación de la exposición a polvo de carbón en tres departamentos de Colombia, 2012-2015”, financiado por el Instituto Nacional de Salud, Universidad de Los Andes, la Universidad del Rosario, Positiva ARL y Colciencias. El análisis de los datos del estudio se realizó a través del software Stata versión 11. Resultados El 100% de la población estudio fueron de sexo masculino. La mediana para la edad fue de 40.5 años (20 – 73). La labor más comúnmente desempañada por los mineros fue: picadores 168 (72,41%). Los síntomas respiratorios más frecuentemente encontrados en este estudio fueron expectoración y tos. En cuanto a expectoración fue más frecuente en la mañana durante el invierno: 66.38% (154) y la tos de día o de noche durante el invierno: 53.88% (125). Para el hábito de fumar el 17.67% fumaba al momento del estudio. En 69 mineros (29.74%) se encontraron anormalidades parenquimatosas en la Radiografía de Tórax.