Survival, growth, and yield of brown trout stocked as fingerlings in Hot Creek, California

Four groups of fin clipped brown trout (Salmo trutta) fingerlings were planted in Hot Creek over a six year period. Survival and growth were estimated by fall and/or spring mark-and-recapture surveys. Yield to the angler for two of the tour groups stocked was estimated by stratified random creel surveys. Fingerling survival from the midsummer stocking period to fall averaged 51 %. Overwinter survival from young-of-the-year to yearling fish averaged 49%. Angler harvest of two groups of fingerlings stocked at densities of 16,082 fish/mile averaged 1,704 trout/mile (10.6%) and 194 lbs/acre. Abundant cover and microhabitat suitable tor young trout, ice-free winters, and rapid growth were factors viewed as contributing to high yields. Results do not suggest a change is needed in the general policy of not stocking brown trout fingerlings in California streams. Results do show that fingerlings stocked in Hot Creek, and presumably other productive streams with abundant cover, can effectively fill a void created by limited recruitment. (PDF contains 24 pages.)

Silver King Creek Paiute cutthroat trout restoration, 1991 through 1993

Silver King Creek, Alpine County, is the native range of the Federally-threatened Paiute cutthroat trout, Oncorhynchus clarki seleniris. Paiute cutthroat currently inhabit Coyote Valley and Corral Valley creeks, which are tributaries to Silver King Creek below Llewellyn Falls, and also Silver King Creek and tributaries aboye Llewellyn Falls. Rainbow trout, O. mykiss, were introduced into the basin during 1949 and became hybridized with Paiute cutthroat. Chemical treatments attempted by the California Department of Fish and Game (CDFG) in 1964 and 1976 failed to eliminate hybrid trout. A chemical treatment project was again conducted by the CDFG from 1991 through 1993 to eliminate hybrid trout from within the range of Paiute cutthroat. This report presents a summary of events for the first two years of the Silver King Paiute Cutthroat Trout Restoration Project; a more thorough analysis is made of the third and final year of the project. (PDF contains 39 pages.)

Relative importance of Deep Creek Lake to other areas in respect to certain recreational and economic aspects

Presents a review of the recreational values and economic importance of Maryland Fishing waters. (PDF contains 5 pages)

Observations on the ecology of Hepsetus odoe, Bloch, 1794 (Pisces: Hepsetidae) in Epie Creek floodplain, Niger Delta, Nigeria

The distribution, abundance, age and growth, the food and feeding habits, condition factor and reproduction of Hepsetus odoe in the Epie Creek Floodplain (Nigeria) was studied. H. odoe occur in the creek, swamp channel and lake. It is a very common, abundant and one of the major commercial species. A total of 457 specimens weighing 76.90 kg were caught during the period of investigation. The catches were more abundant in the dry season than in the wet season. The total length ranged from 10 cm to 46 cm while the weight varied between 50 g and 900 g. Six distinct components or year classes were observed using Bhattacharya's method. A growth exponential value 'b' was 3.35 with condition factor, 'k' values ranging from 0.69 to 0.83. The main diets of Hepsetus odoe were fish, including crustaceans (shrimps) and insects. The mean fecundity was 6060 plus or minus 358 eggs (range 2,769 to 6.667 eggs). The ova diameter of H. odoe was found to range from 2.2 mm to 2.6 mm with overall mean = 2.4 plus or minus 0.1)

Three-dimensional self-assembly of brush block copolymers to photonic crystals

The development of Ring Opening Metathesis Polymerization has allowed the world of block copolymers to expand into brush block copolymers. Brush block copolymers consist of a polymer backbone with polymeric side chains, forcing the backbone to hold a stretched conformation and giving it a worm-like shape. These brush block copolymers have a number of advantages over tradition block copolymers, including faster self-assembly behavior, larger domain sizes, and much less entanglement. This makes them an ideal candidate in the development of a bottom-up approach to forming photonic crystals. Photonic crystals are periodic nanostructures that transmit and reflect only certain wavelengths of light, forming a band gap. These are used in a number of coatings and other optical uses. One and two dimensional photonic crystals are commercially available, though are often expensive and difficult to manufacture. Previous work has focused on the creation of one dimensional photonic crystals from brush block copolymers. In this thesis, I will focus on the synthesis and characterization of asymmetric brush block copolymers for self-assembly into two and three dimensional photonic crystals. Three series of brush block copolymers were made and characterized by Gel Permeation Chromatography and Nuclear Magnetic Resonance spectroscopy. They were then made into films through compressive thermal annealing and characterized by UV-Vis Spectroscopy and Scanning Electron Microscopy. Evidence of non-lamellar structures were seen, indicating the first reported creation of two or three dimensional photonic crystals from brush block copolymers.

Self-assembly of brush polymers

The unique structure and properties of brush polymers have led to increased interest in them within the scientific community. This thesis describes studies on the self-assembly of these brush polymers.

Chapter 2 describes a study on the rapid self-assembly of brush block copolymers into nanostructures with photonic bandgaps spanning the entire visible spectrum, from ultraviolet to near infrared. Linear relationships are observed between the peak wavelengths of reflection and polymer molecular weights. This work enables "bottom-up" fabrication of photonic crystals with application-tailored bandgaps, through synthetic control of the polymer molecular weight and the method of self-assembly.

Chapter 3 details the analysis of the self-assembly of symmetrical brush block copolymers in bulk and thin films. Highly ordered lamellae with domain spacing ranging from 20 to 240 nm are obtained by varying molecular weight of the backbone. The relationship between degree of polymerization and the domain spacing is reported, and evidence is provided for how rapidly the brush block copolymers self-assemble and achieve thermodynamic equilibrium.

Chapter 4 describes investigations into where morphology transitions take place as the volume fraction of each block is varied in asymmetrical brush block copolymers. Imaging techniques are used to observe a transition from lamellar to a cylindrical morphology as the volume fraction of one of the blocks exceeds 70%. It is also shown that the asymmetric brush block copolymers can be kinetically trapped into undulating lamellar structures by drop casting the samples.

Chapter 5 explores the capability of macromolecules to interdigitate into densely grafted molecular brush copolymers using stereocomplex formation as a driving force. The stereocomplex formation between complementary linear polymers and brush copolymers is demonstrated, while the stereocomplex formation between complementary brush copolymers is shown to be restricted.

A study of the proposed Diamond Creek Reservoir

Politically the Colorado river is an interstate as well as an international stream. Physically the basin divides itself distinctly into three sections. The upper section from head waters to the mouth of San Juan comprises about 40 percent of the total of the basin and affords about 87 percent of the total runoff, or an average of about 15 000 000 acre feet per annum. High mountains and cold weather are found in this section. The middle section from the mouth of San Juan to the mouth of the Williams comprises about 35 percent of the total area of the basin and supplies about 7 percent of the annual runoff. Narrow canyons and mild weather prevail in this section. The lower third of the basin is composed of mainly hot arid plains of low altitude. It comprises some 25 percent of the total area of the basin and furnishes about 6 percent of the average annual runoff.

The proposed Diamond Creek reservoir is located in the middle section and is wholly within the boundary of Arizona. The site is at the mouth of Diamond Creek and is only 16 m. from Beach Spring, a station on the Santa Fe railroad. It is solely a power project with a limited storage capacity. The dam which creats the reservoir is of the gravity type to be constructed across the river. The walls and foundation are of granite. For a dam of 290 feet in height, the back water will be about 25 m. up the river.

The power house will be placed right below the dam perpendicular to the axis of the river. It is entirely a concrete structure. The power installation would consist of eighteen 37 500 H.P. vertical, variable head turbines, directly connected to 28 000 kwa. 110 000 v. 3 phase, 60 cycle generators with necessary switching and auxiliary apparatus. Each unit is to be fed by a separate penstock wholly embedded into the masonry.

Concerning the power market, the main electric transmission lines would extend to Prescott, Phoenix, Mesa, Florence etc. The mining regions of the mountains of Arizona would be the most adequate market. The demand of power in the above named places might not be large at present. It will, from the observation of the writer, rapidly increase with the wonderful advancement of all kinds of industrial development.

All these things being comparatively feasible, there is one difficult problem: that is the silt. At the Diamond Creek dam site the average annual silt discharge is about 82 650 acre feet. The geographical conditions, however, will not permit silt deposites right in the reservoir. So this design will be made under the assumption given in Section 4.

The silt condition and the change of lower course of the Colorado are much like those of the Yellow River in China. But one thing is different. On the Colorado most of the canyon walls are of granite, while those on the Yellow are of alluvial loess: so it is very hard, if not impossible, to get a favorable dam site on the lower part. As a visitor to this country, I should like to see the full development of the Colorado: but how about THE YELLOW!

Why brush up your Shakespeare and your theory?: an Angela Carter companion to myths

Essa dissertação visa estudar a formação do que veio a ser conhecido como o mito Shakespeariano e sua relação com a produção literária contemporânea, exemplificada pelo romance Wise Children, da romancista inglesa Angela Carter. Tal objetivo pretende ser alcançado por meio uma revisão teórica de elementos relacionados à concepção de mito desenvolvida pelo filósofo francês Roland Barthes, tais quais a concepção tradicional de mito, o Estruturalismo, o Pós-estruturalismo, a crítica ideológica marxista e os Estudos Culturais. Um estudo dos processos históricos que deram origem ao e ajudaram a propagar o mito Shakespeariano também é levado a cabo nessa dissertação: a apropriação da figura e da obra de William Shakespeare feita pelos pré-românticos e pelos românticos em geral; a associação da figura de Shakespeare com a identidade nacional do Império Britânico; o advento da industria Shakespeariana e o papel das adaptações das peças de Shakespeare na propagação do mito Shakespeariano

P2O5-B2O3-R2O-MO-Al2O3系统玻璃物化性质的研究

以Yb^3+-Er^3+共掺的P2O5-B2O3-R2O-MO-Al2O3(R=Li，Na，K；M=Zn，Ca，Sr，Ba)系统玻璃为研究对象，分别分析了改变B2O3，的含量，以及加入不同种类的碱金属和碱土金属氧化物对玻璃的物理化学性质的影响。研究结果表明，当B2O3的含量增加，玻璃的Tg，Tf上升，热膨胀系数下降；随着修饰体阳离子半径减小，玻璃的溶解速率下降，化学稳定性变好。

Mo���子溅射能量对Mo���Si薄膜微结构的影响

用磁控溅射法制备了Mo���Si薄膜，用AFM和XRD分别研究了Mo���子的溅射能量不同时，Mo���Si薄膜表面形貌和晶相的变化。通过比较发现，随着Mo���子溅射能量的增大，Mo���Si薄膜表面粗糙度增加，Mo���Si的特征X射线衍射峰也越来越强，并且Mo���层和Si膜层之间生成了Mo-Si2。Mo���子的溅射能量是诱导非晶Si结晶和MoSi2生成的主要原因。

纳米Mo���的光学特性及最小连续膜厚研究

利用Lambda-900分光光度计，在波长为310～1250nm范围内测量了离子束溅射沉积不同厚度纳米Mo���的反射率和透射率。选定波长为310nm，350nm，400nm，500nm，550nm，632nm，800nm，1200nm时对薄膜的反射率、透射率和吸收率随膜厚变化的关系进行了讨论。实验结果显示，纳米Mo���的光学特性有明显的尺寸效应。提出将薄膜对光波长为550nm时的反射率和透射率随Mo���厚度变化关系的交点对应的厚度作为特征厚度，该厚度可认为是纳米Mo���生长从不连续膜进入连续膜的最小连续膜厚。利用

不同膜层数的Mo/Si多层膜的表界面粗糙度和软X射线反射率

用磁控溅射法制备了顶层分别是Mo���层和Si膜层的两个系列的Mo/Si多层膜，它们的周期厚度相同但是膜层数各不相同。Mo/Si多层膜的周期厚度和界面粗糙度由小角X射线衍射（SAXRD）曲线拟和得到。用原子力显微镜测量了Mo/Si多层膜的表面粗糙度。在国家同步辐射实验室测量了Mo/Si多层膜的软X射线反射率。通过理论和试验研究，发现Mo/Si多层膜的软X射线反射率主要由周期数和界面粗糙度决定，表面粗糙度对Mo/Si多层膜的软X射线反射率影响较小。

研究扩散屏障层对Mo/Si多层膜软X射线反射率影响的模拟

在特定波长下,用四层结构模型模拟了Mo/Si多层膜的软X射线反射率.研究了扩散屏障层dMo-on-Si和dSi-on-Mo���Mo/Si多层膜软X射线反射率的影响.研究发现,扩散屏障层并不总是损害Mo/Si多层膜的光学性能,通过合理设计dMo-on-Si和dSi-on-Mo���度,增加dMo-on-Si与dSi-on-Mo���比值,也能提高多层膜的软X射线反射率.

用不同的Mo���溅射功率制备Mo���Si多层膜

用磁控溅射法制备了周期厚度和周期数均相同的Mo���Si多层膜，用原子力显微镜和小角X射线衍射分别研究了Mo���溅射功率不相同时，Mo���Si多层膜表面形貌和晶相的变化。随后在国家同步辐射实验室测量了Mo���Si多层膜的软X射线反射率。研究发现，随着Mo���溅射功率的增大，Mo���Si多层膜的表面粗糙度增加，Mo���特征X射线衍射峰也增强，Mo���Si多层膜的软X射线峰值反射率先增大后减小。

Mo���Si软X射线多层膜的界面粗糙度研究

用磁控溅射法分别制备了以Mo���层和Si膜层为顶层的Mo���Si多层膜系列，利用小角X射线衍射确定了各多层膜的周期厚度。以不同周期数的Mo���Si多层膜的新鲜表面近似等同于同一多层膜的内界面，通过原子力显微镜研究了多层膜界面粗糙度随膜层数的变化规律。并在国家同步辐射实验室测量了各多层膜的软X射线反射率。研究表明：随着膜层数的增加，Mo���层和Si膜层的界面粗糙度先减小后增加然后再减小，多层膜的峰值反射率先增加后减小。