948 resultados para Águas residuais de estações de eliminação


Relevância:

100.00% 100.00%

Publicador:

Resumo:

One of the biggest environmental problems of the population is the lack of sewage treatment, especially in rural communities and low-income. The development of technologies for efficient, low-cost sanitation need to be developed to meet the disadvantaged people of this basic service. This work was the implementation proposal of a technology called constructed wetlands, also known as Wastewater Treatment Plant for Roots Zone - ETEZR. The objective was to develop a non- formal environmental education proposal for redevelopment, using outreach methods for residents and deployment of this technology ETEZR in the rural community of Cologne Grebe in Sao Jose dos Pinhais - PR. With technical support from the Paranaense Technical Assistance and Rural Extension Institute -EMATER and the Federal Technological University of Paraná - UTFPR, 5 ETEZR were deployed in the colony through three theoretical and practical workshops, which involved total 67 people from the community 5 technicians EMATER and 13 of the Municipal Town Hall. Após4 months of implementation were carried out two collections of raw wastewater and treated to analyze physical, chemical and biological parameters. The results evaluated by chemical parameters BOD, COD, phosphorus, ammonia nitrogen comparing raw and treated sewage, demonstrate that ETEZR are effective in the treatment of sewage. 5 Seasons minimum and maximum efficiency between the basic parameters analyzed were 52.2 to 95.5% for BOD; 47 to 94.5% for COD; 21.5 to 96% phosphorus; 30-98% for ammonia nitrogen. Oils and greases, and a series of solid also achieved a significant reduction in their values when comparing the raw sewage and treated sewage, and biological parameters evaluated by means of coliforms showed a reduction of 80 to 99%. With the implementation of environmental education process aimed sanitation was possible to evaluate the perception of the population to accept the environmental sanitation technology using the ETEZR, understand the needs and sanitation concepts for the community. This research evaluated the development of the methodology applied by the non-formal environmental education in order to provide subsidies for rural sanitation plan process for the municipality.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tese de Doutoramento, Ciências do Mar da Terra e do Ambiente, Ramo: Ciências e Tecnologias do Ambiente, Especialidade em Biotecnologia, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tese de Doutoramento, Ciências do Mar, da Terra e do Ambiente, Ramo: Ciências e Tecnologias do Ambiente, Especialização em Ecotoxicologia, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fonte de riquezas supostamente inesgotáveis, os oceanos e as zonas costeiras há muito tempo servem de depósito para todo tipo de resíduo produzido pelo homem, desde águas residuais a todo tipo de resíduos sólidos descartados inadequadamente e que acabam por originar o lixo marinho. A Baía de Guanabara é um reflexo histórico dessas ações mal geridas em terra e que acabam refletidas em seu espelho dágua. O presente estudo procura fazer uma analise sobre as origens do lixo marinho na Enseada de Jurujuba, localizada na Baía de Guanabara, e seu principal canal de drenagem, o Canal de São Francisco (CSF), com ênfase ao descarte de resíduos nas comunidades localizadas a montante do canal. Apresenta também uma avaliação da experiência de projetos de intervenção e prevenção à geração do lixo marinho, com destaque a um projeto de coleta de lixo flutuante com uso de embarcação, bem como a iniciativa da Prefeitura de Niterói em um Projeto de Gestão Integrada de Resíduos no alto da bacia contribuinte ao CSF. O trabalho foi estruturado através de observações de campo, entrevistas, analise de relatórios dos projetos envolvidos, bem como consulta a sites e blogs relacionados ao assunto. O fato de resíduos sólidos terminarem em um corpo hídrico torna sua retirada e destinação adequadas muito mais complicadas do que em terra, evidenciando a complexidade do lixo marinho. Os resultados apontam para a necessidade de mais estudos nas áreas periféricas, que abrangem a maior parte da população, com vista à integração de politicas públicas no planejamento de ações por bacias ou microbacias hidrográficas e como forma de prevenção à geração do lixo marinho e melhora da qualidade de vida dessas populações.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Environmental transport of pollutants comprises distinct processes such as volatilization, leaching and surface runoff. Sorption is one of the most important phenomena that affects leaching, and thus the fate of hydrophobic organic pollutants in soils and also control their distribution in the soil/water environment. The work developed focuses the optimization of analytical techniques for monitoring the sorption behaviour of organic pollutants, 17α- ethinylestradiol (EE2) and atrazine, and their fate in aqueous environment. Initially, the development of several analytical techniques, such as micellar electrokinetic chromatography, spectral deconvolution, using UV-Vis and fluorescence spectroscopy, and also enzyme linked immunosorbent assay was performed. Optimization, method performance and recovery tests are described and results discussed. Moreover, in order to evaluate the applicability of the previously optimized method, atrazine and EE2 sorption to soil samples was performed. The work developed provide several options, in terms of methodology to follow sorption of atrazine onto soils, however the choice depends on the laboratory conditions and on the analyst preferences. The advantages and disadvantages of each methodology should be evaluated first. The second part of this work consisted in the sorption behaviour study of those two different hydrophobic organic pollutants onto different soil samples. Soil organic matter chemical characterization, being essential to understand the binding mechanism responsible for the interactions, was made. The results of atrazine binding to organic matter pointed out that carboxyl units and aromaticrich organic matter are the most efficient binding agents for atrazine. EE2 adsorbs strongly to soil organic matter and is mainly stabilized by hydrophobic interactions, through aromatic nuclei face to face with surface and/or another EE2 molecule association. Farmyard manure soil contains higher aromatic and carboxyl units, indicating that this type of manure can be effectively used to minimize the residual toxicity of EE2 and atrazine present in soils, increasing the sorption and reducing leaching onto water resources. Since the final destination of organic pollutants can be ground, surface and/or waste water, atrazine and 17α-ethinylestradiol were quantified in several water samples.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O Homem sempre utilizou processos produtivos com o intuito de satisfazer as suas necessidades básicas. Com o aumento da população mundial, atualmente superior a sete mil milhões de indivíduos, a quantidade de resíduos produzidos pela atividade humana, através da atividade industrial e descarga de resíduos domésticos e agrícolas, tomou dimensões desmesuradas, que são responsáveis por gerar um elevado volume de resíduos contendo diversos elementos e compostos prejudiciais ao ambiente, e, consequentemente, para a saúde humana, entre os quais se incluem alguns metais. O presente trabalho tem como principais objetivos estudar a remoção de mercúrio pela cortiça em águas sintéticas (agua MilliQ) e naturais (água de abastecimento público), na presença de outros metais (Cd, Pb e Cu) e avaliar a influência destes metais no processo de remoção. Os resultados permitiram verificar que 2,5mg/L de cortiça é uma quantidade adequada para remover mercúrio de uma solução com concentração inicial de 50μg/L de metal (percentagem de remoção de 70%), na ausência de outros contaminantes (cádmio, chumbo e cobre). Nestas condições, a quantidade máxima de mercúrio removido pela cortiça após 96 horas de contacto foi de 11,6mg de mercúrio por grama de cortiça. A presença de chumbo e cobre ou uma mistura deles reduziu a taxa de remoção de mercúrio pela cortiça e a velocidade inicial de remoção; a presença de cádmio afetou a velocidade inicial de remoção. Mesmo com a adição de outros contaminantes, como cádmio, chumbo e cobre e na presença de água de abastecimento público, observou-se que a cortiça apresenta capacidade de remoção de mercúrio. O modelo de pseudo segunda ordem foi o que apresentou um melhor ajuste aos resultados obtidos e o processo de remoção de mercúrio pela cortiça aparenta ser controlado quer pela difusão no filme quer pela difusão no poro.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O tratamento físico-químico de águas residuais, de origem industrial, mais comum é o tratamento baseado na adição de coagulante e floculante a um efluente. No entanto, o tratamento eletroquímico é um tipo de tratamento que tem vindo a ser explorado e estudado com mais ênfase ao longo dos últimos anos. O tratamento eletroquímico é uma tecnologia AOP (Processos de Oxidação Avançada) e divide-se em eletrólise direta (oxidação e redução) e indireta (eletrocoagulação-flotação e eletrooxidação). A eletrocoagulação e eletrooxidação divergem apenas pelo tipo de reações que ocorrem, devido ao material que constitui os elétrodos. São processos complexos com uma multiplicidade de mecanismos que operam sinergicamente para remover poluentes da água. Tendo em conta a sua complexidade e ainda dificuldade de compreensão, existem na literatura diferentes versões acerca de quais os mecanismos chave, assim como diversas configurações geométricas de reatores e elétrodos. Atualmente, este tipo de tratamento tem vindo a evoluir, tornando-se num método economicamente viável para o tratamento de uma grande variedade de águas residuais, nomeadamente, aquelas que possuem compostos recalcitrantes na sua composição. O presente trabalho foi realizado nas instalações da VentilAQUA S.A. e, tendo em conta a sua área de especialidade, o trabalho exposto focou-se no desenvolvimento de soluções técnicas de AOP, nomeadamente na área eletroquímica (eletrocoagulação e eletrooxidação),para estudo dos parâmetros operacionais numa nova configuração geométrica para os elétrodos. Tendo por base os contributos da revisão bibliográfica, o estudo incidiu num reator tubular, com elétrodos de inox dispostos de forma concêntrica, à mesma distância entre si. Com este reator foram executados variados testes, com diferentes efluentes, que permitiram obter resultados operacionais de otimização de funcionamento, tendo em vista a remoção de poluentes. O estudo financeiro associado permitiu concluir que a eletrooxidação é significativamente mais económica que o tratamento físico-químico, nas condições operacionais e para os efluentes tratados. Relativamente ao Acompanhamento e Gestão de ETAR’s (Capítulo 4) foi possível verificar que todos os casos em estudo apresentam uma boa eficiência de remoção de matéria orgânica, permitindo a descarga do seu efluente com uma carga poluente que cumpre com os requisitos legais de descarga em meio hídrico.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação mest., Engenharia Biológica, Universidade do Algarve, 2008

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de Mestrado, Gestão da Água e da Costa, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2010

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work describes the synthesis of nanosized metal sulfides and respective SiO2 and/or TiO2 composites in high yield via a straightforward process, under ambient conditions (temperature and pressure), by adding to aqueous metals a nutrient solution containing biologically generated sulfide from sulfate-reducing bacteria (SRB). The nanoparticles‘ (NPs) morphological properties were shown not to be markedly altered by the SRB growth media composition neither by the presence of bacterial cells. We further extended the work carried out, using the effluent of a bioremediation system previously established. The process results in the synthesis of added value products obtained from metal rich effluents, such as Acid Mine Drainage (AMD), when associated with the bioremediation process. Precipitation of metals using sulfide allows for the possibility of selective recovery, as different metal sulfides possess different solubilities. We have evaluated the selective precipitation of CuS, ZnS and FeS as nanosized metal sulfides. Again, we have also tested the precipitation of these metal sulfides in the presence of support structures, such as SiO2. Studies were carried out using both artificial and real solutions in a continuous bioremediation system. We found that this method allowed for a highly selective precipitation of copper and a lower selectivity in the precipitation of zinc and iron, though all metals were efficiently removed (>93% removal). This research has also demonstrated the potential of ZnS-TiO2 nanocomposites as catalysts in the photodegradation of organic pollutants using the cationic dye, Safranin-T, as a model contaminant. The influence of the catalyst amount, initial pH and dye concentration were also evaluated. Finally, the efficiency of the precipitates as catalysts in sunlight mediated photodegradation was investigated, using different volumes of dye-contaminated water (150 mL and 10 L). This work demonstrates that all tested composites have the potential to be used as photocatalysts for the degradation of Safranin-T.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologias, Universidade do Algarve, 2015

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de mestrado, Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação de Mestrado, Finanças Empresariais, Faculdade de Economia, Universidade do Algarve, 2015

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tese de doutoramento, Química (Química Tecnológica), Universidade de Lisboa, Faculdade de Ciências, 2016