Predation in the marine intertidal amphipod Echinogammarus marinus Leach: implications of inter- and intra-individual variation

Studies of competition, predator–prey dynamics and food webs typically consider conspecifics as equal, however, individuals from the same population that are seemingly identical can show considerable variation with regards to a number of processes. Such phenomena may be demonstrated in terms of diet, and the quantities and types of resources that are consumed are commonly considered. The marine amphipod Echinogammarus marinus, a recently demonstrated predator on intertidal rocky shores, has been shown to consume a wide range of food types but it is unknown how this may vary between individuals. Here, we investigated the variation that occurs both among and within individuals of a population of E. marinus with respect to the mean numbers consumed of a common prey item, the isopod Jaera nordmanni. First, by comparing the length of starvation times, used as a proxy for hunger level, individuals maintained without food for up to 24 h consumed significantly less prey during feeding trials than those starved for 48 h and longer. The degree of inter-individual variation within each starvation period was also found to differ, with greater variation among individuals starved for shorter periods of time than those starved for longer time periods. Secondly, we tested whether individual amphipods tracked over time consumed consistently similar numbers of prey or whether they showed intra-individual variation, and if so, to what degree. We found that the numbers of prey consumed per individual could be predicted in the short-term between consecutive feeding trials, however over the long-term this relationship broke down. These results are discussed with respect to potential physiological and behavioural mechanisms, as well as the implications that such variation may have for stability of prey populations in the field.

Process-variation resilient and voltage-scalable dct architecture for robust low-power computing

In this paper, we present a novel discrete cosine transform (DCT) architecture that allows aggressive voltage scaling for low-power dissipation, even under process parameter variations with minimal overhead as opposed to existing techniques. Under a scaled supply voltage and/or variations in process parameters, any possible delay errors appear only from the long paths that are designed to be less contributive to output quality. The proposed architecture allows a graceful degradation in the peak SNR (PSNR) under aggressive voltage scaling as well as extreme process variations. Results show that even under large process variations (±3σ around mean threshold voltage) and aggressive supply voltage scaling (at 0.88 V, while the nominal voltage is 1.2 V for a 90-nm technology), there is a gradual degradation of image quality with considerable power savings (71% at PSNR of 23.4 dB) for the proposed architecture, when compared to existing implementations in a 90-nm process technology. © 2006 IEEE.

VEDA:Variation-aware energy-efficient discrete Wavelet Transform architecture

In this paper, we present a unified approach to an energy-efficient variation-tolerant design of Discrete Wavelet Transform (DWT) in the context of image processing applications. It is to be noted that it is not necessary to produce exactly correct numerical outputs in most image processing applications. We exploit this important feature and propose a design methodology for DWT which shows energy quality tradeoffs at each level of design hierarchy starting from the algorithm level down to the architecture and circuit levels by taking advantage of the limited perceptual ability of the Human Visual System. A unique feature of this design methodology is that it guarantees robustness under process variability and facilitates aggressive voltage over-scaling. Simulation results show significant energy savings (74% - 83%) with minor degradations in output image quality and avert catastrophic failures under process variations compared to a conventional design. © 2010 IEEE.

Process variation tolerant low power DCT architecture

2-D Discrete Cosine Transform (DCT) is widely used as the core of digital image and video compression. In this paper, we present a novel DCT architecture that allows aggressive voltage scaling by exploiting the fact that not all intermediate computations are equally important in a DCT system to obtain "good" image quality with Peak Signal to Noise Ratio(PSNR) > 30 dB. This observation has led us to propose a DCT architecture where the signal paths that are less contributive to PSNR improvement are designed to be longer than the paths that are more contributive to PSNR improvement. It should also be noted that robustness with respect to parameter variations and low power operation typically impose contradictory requirements in terms of architecture design. However, the proposed architecture lends itself to aggressive voltage scaling for low-power dissipation even under process parameter variations. Under a scaled supply voltage and/or variations in process parameters, any possible delay errors would only appear from the long paths that are less contributive towards PSNR improvement, providing large improvement in power dissipation with small PSNR degradation. Results show that even under large process variation and supply voltage scaling (0.8V), there is a gradual degradation of image quality with considerable power savings (62.8%) for the proposed architecture when compared to existing implementations in 70 nm process technology.

Low-Power Process-Variation Tolerant Arithmetic Units Using Input-Based Elastic Clocking

In this paper we propose a design methodology for low-power high-performance, process-variation tolerant architecture for arithmetic units. The novelty of our approach lies in the fact that possible delay failures due to process variations and/or voltage scaling are predicted in advance and addressed by employing an elastic clocking technique. The prediction mechanism exploits the dependence of delay of arithmetic units upon input data patterns and identifies specific inputs that activate the critical path. Under iso-yield conditions, the proposed design operates at a lower scaled down Vdd without any performance degradation, while it ensures a superlative yield under a design style employing nominal supply and transistor threshold voltage. Simulation results show power savings of upto 29%, energy per computation savings of upto 25.5% and yield enhancement of upto 11.1% compared to the conventional adders and multipliers implemented in the 70nm BPTM technology. We incorporated the proposed modules in the execution unit of a five stage DLX pipeline to measure performance using SPEC2000 benchmarks [9]. Maximum area and throughput penalty obtained were 10% and 3% respectively.

Significance Driven Computation: A Voltage-Scalable, Variation-Aware, Quality-Tuning Motion Estimator

In this paper we present a design methodology for algorithm/architecture co-design of a voltage-scalable, process variation aware motion estimator based on significance driven computation. The fundamental premise of our approach lies in the fact that all computations are not equally significant in shaping the output response of video systems. We use a statistical technique to intelligently identify these significant/not-so-significant computations at the algorithmic level and subsequently change the underlying architecture such that the significant computations are computed in an error free manner under voltage over-scaling. Furthermore, our design includes an adaptive quality compensation (AQC) block which "tunes" the algorithm and architecture depending on the magnitude of voltage over-scaling and severity of process variations. Simulation results show average power savings of similar to 33% for the proposed architecture when compared to conventional implementation in the 90 nm CMOS technology. The maximum output quality loss in terms of Peak Signal to Noise Ratio (PSNR) was similar to 1 dB without incurring any throughput penalty.

Containing the Nanometer "Pandora-Box": Cross-Layer Design Techniques for Variation Aware Low Power Systems

The demand for richer multimedia services, multifunctional portable devices and high data rates can only been visioned due to the improvement in semiconductor technology. Unfortunately, sub-90 nm process nodes uncover the nanometer Pandora-box exposing the barriers of technology scaling-parameter variations, that threaten the correct operation of circuits, and increased energy consumption, that limits the operational lifetime of today's systems. The contradictory design requirements for low-power and system robustness, is one of the most challenging design problems of today. The design efforts are further complicated due to the heterogeneous types of designs ( logic, memory, mixed-signal) that are included in today's complex systems and are characterized by different design requirements. This paper presents an overview of techniques at various levels of design abstraction that lead to low power and variation aware logic, memory and mixed-signal circuits and can potentially assist in meeting the strict power budgets and yield/quality requirements of future systems.

Progressive deformation of glacial till due to viscoplastic straining and pore pressure variation

The stress regime in a cutting (slope) is complex, with different principle stresses acting in different directions along the potential failure plane. For example, stresses may be primarily in extension near the toe and in compression near the crest of a slope. Cuttings in heavily overconsolidated clays are known to be susceptible to progressive failure which usually starts at the toe of the slope. Softening and the development of rupture surfaces have been observed in the field and are well documented for London Clays. However, this failure mechanism is yet to be established for glacial tills. To better understand the progressive failure mechanism, this paper discusses a series of laboratory tests conducted on reconstituted glacial till samples from Northern Ireland. Initial observations indicate that, a soil with insitu stress states between 80-90% of peak strength may undergo significant viscoplastic straining as a result of the combination of pore-pressure cycling and elevated stress level.

Regional variation in five indicators of health in early childhood: a cohort study

Background Persistent and marked differences in adult morbidity and mortality between regions in the United Kingdom (UK) are often referred to as the north-south gradient (or divide) and the Scottish effect, and are only partly explained by adult levels of socioeconomic status (SES) or risk factors which suggests variation arising earlier in life. The aim of the current study was to examine regional variations in five health indicators in children in England and Scotland at birth and three years of age.
Methods Respondents were 10,500 biological Caucasian mothers of singleton children recruited to the Millennium Cohort Study (MCS). Outcome variables were: gestational age and weight at birth, and height, body mass index (BMI), and externalising behaviour at age three. Region/Country was categorised as: South (reference), Midlands, North, and Scotland. Respondents provided information on child, maternal, household, and socioeconomic characteristics when the cohort infant/child was aged nine months and again when aged three years. 
Results There were no significant regional variations for gestational age or birthweight. However, at age three there was a north-south gradient for externalising behaviour and a north-south divide in BMI which attenuated on adjustment. However, a north-south divide in height was not fully explained by the adjusted model. There was also evidence of a ‘Midlands effect’, with increased likelihoods of shorter stature and behaviour problems. Results showed a Scottish effect for height and BMI in the unadjusted models, and height in the adjusted model. However, Scottish children were less likely to show behaviour problems in crude and adjusted models. 
Conclusions Findings indicated no marked regional differences in children at birth, but by age three some regional health differences were evident, and though not distinct north-south gradients or Scottish effects, are evidence of health inequalities appearing at an early age and dependent on geographic location.

Defining the role of common variation in the genomic and biological architecture of adult human height

Using genome-wide data from 253,288 individuals, we identified 697 variants at genome-wide significance that together explained one-fifth of the heritability for adult height. By testing different numbers of variants in independent studies, we show that the most strongly associated 1/42,000, 1/43,700 and 1/49,500 SNPs explained 1/421%, 1/424% and 1/429% of phenotypic variance. Furthermore, all common variants together captured 60% of heritability. The 697 variants clustered in 423 loci were enriched for genes, pathways and tissue types known to be involved in growth and together implicated genes and pathways not highlighted in earlier efforts, such as signaling by fibroblast growth factors, WNT/I 2-catenin and chondroitin sulfate-related genes. We identified several genes and pathways not previously connected with human skeletal growth, including mTOR, osteoglycin and binding of hyaluronic acid. Our results indicate a genetic architecture for human height that is characterized by a very large but finite number (thousands) of causal variants.

Large panel-survey data demonstrated country-level and ethnic minority variation in consent for health record linkage

Objectives
To investigate individual, household and country variation in consent to health record linkage.

Study Design and Setting
Data from 50,994 individuals aged 16-74 years recruited to wave 1 of a large UK general purpose household survey (January 2009 – December 2010) were analysed using multi-level logistic regression models.

Results
Overall, 70.7% of respondents consented to record linkage. Younger age, marriage, tenure, car ownership and education were all significantly associated with consent, though there was little deviation from 70% in subgroups defined by these variables. There were small increases in consent rates in individuals with poor health when defined by self-reported long term limiting illness (adjusted OR 1.11; 95%CIs 1.06, 1.16), less so when defined by General Health Questionnaire score (adjusted OR=1.05; 95%CIs 1.00, 1.10), but the range in absolute consent rates between categories was generally less than 10%. Larger differences were observed for those of non-white ethnicity who were 38% less likely to consent (adjusted OR 0.62; 95%CIs 0.59, 0.66). Consent was higher in Scotland than England (adjusted OR 1.17; 95%CIs 1.06, 1.29) but lower in Northern Ireland (adjusted OR 0.56; 95%CIs 0.50, 0.63).

Conclusion
The modest overall level of systematic bias in consent to record linkage provides reassurance for record linkage potential in general purpose household surveys. However, the low consent rates amongst non-white ethnic minority survey respondents will further compound their low survey participation rates. The reason for the country-level variation requires further study.

Methylated Arsenic Species in Rice:Geographical Variation, Origin, and Uptake Mechanisms

Rice is a major source of inorganic arsenic (iAs) in the human diet because paddy rice. efficient at accumulating As Rice As speciation is dominated by iAs and dimethylarsinic acid (DMA). Here we review the global pattern in rice As speciation and the factors causing the variation. Rice produced in Asia shows a strong linear relationship between iAs and total As concentration with a slope of 0.78. Rice produced in Europe and the United States shows a more variable, but generally hyperbolic relationship with DMA being predominant in U.S. rice. Although there is significant genotypic variation in grain As speciation, the regional Variations are primarily attributed to environmental factors. Emerging evidence also indicates that methylated. As species in rice are derived from the soil, while rice plants lack the As methylation ability. Soil flooding and additions of organic matter increase microbial methylation of As, although the microbial community responsible for methylafion is poorly understood. Compared with iAs, methylated As species are taken up by rice roots less efficiently but are transported to the grain much, more efficiently, which may be an important factor responsible for the spikelet sterility disorder (straight head disease) in rice. DMA is a weak carcinogen, but the level of ingestion from rice consumption is much lower than that of concern. Questions that require further investigations are identified.

SURFACE ENHANCED RAMAN-SCATTERING FROM MILDLY ROUGHENED SURFACES - VARIATION OF SIGNAL WITH METAL GRAIN-SIZE

The intensity of surface enhanced Raman scattering from benzoic acid derivatives on mildly roughened, thermally evaporated Ag films shows a remarkably strong dependence on metal grain size. Large grained (slowly deposited) films give a superior response, by up to a factor of 10, to small grained (quickly deposited) films, with films of intermediate grain size yielding intermediate results. The optical field amplification underlying the enhancement mechanism is due to the excitation of surface plasmon polaritons (SPPs). Since surface roughness characteristics, as determined by STM, remain relatively constant as a function of deposition rate, it is argued that the contrast in Raman scattering is due to differences in elastic grain boundary scattering of SPPs (leading to different degrees of internal SPP damping), rather than differences in the interaction of SPPs with surface inhomogeneities.