Studio delle proprieta ottiche ed elettriche di dispositivi led a confinamento quantico

In questa tesi viene descritto il funzionamento delle sorgenti di luce LED (Light Emitting Diode) a confinamento quantico, che rappresentano la nuova frontiera dell'illuminazione ad alta efficienza e durata. Nei capitoli introduttivi è descritta brevemente la storia dei LEDs dalla loro invenzione agli sviluppi più recenti. Il funzionamento di tali dispositivi fotonici è spiegato a partire dal concetto di sorgente di luce per elettroluminescenza, con particolare riferimento alle eterostrutture a confinamento quantico bidimensionale (quantum wells). I capitoli centrali riguardano i nitruri dei gruppi III-V, le cui caratteristiche e proprietà hanno permesso di fabbricare LEDs ad alta efficienza e ampio spettro di emissione, soprattutto in relazione al fatto che i LEDs a nitruri dei gruppi III-V emettono luce anche in presenza di alte densità di difetti estesi, nello specifico dislocazioni. I capitoli successivi sono dedicati alla presentazione del lavoro sperimentale svolto, che riguarda la caratterizzazione elettrica, ottica e strutturale di LEDs a confinamento quantico basati su nitruri del gruppo III-V GaN e InGaN, cresciuti nei laboratori di Cambridge dal Center for Gallium Nitride. Lo studio ha come obiettivo finale il confronto dei risultati ottenuti su LEDs con la medesima struttura epitassiale, ma differente densità di dislocazioni, allo scopo di comprendere meglio il ruolo che tali difetti estesi ricoprono nella determinazione dell'effcienza delle sorgenti di luce LED. L’ultimo capitolo riguarda la diffrazione a raggi X dal punto di vista teorico, con particolare attenzione ai metodi di valutazioni dello strain reticolare nei wafer a nitruri, dal quale dipende la densità di dislocazioni.

Klonierung und Charakterisierung der Luziferase und des Luziferin regenerierenden Enzyms aus dem marinen Schwamm Suberites domuncula

Bereits 1971 erkannte Reiswig bei einigen Schwämmen in der Kontraktion des Osculums eine Reaktion auf Licht. Nachfolgend konnte für eine Reihe von Schwämmen die Existenz von Lichtreaktionen beobachtet werden (Wapstra & van Soest, 1987). In dieser Arbeit sollten Gene eines Luziferin/Luziferase Systems im marinen Schwamm Suberites domuncula identifiziert werden, die eine Rolle bei der Bio¬lumineszenz spielen. Mit Hilfe der PCR-Technik konnten die in der cDNA-Bank identifizierten Fragmente einer Luziferase und eines Luziferin regenerierenden Enzyms erfolgreich vervollständigt, kloniert und analysiert werden. Datenbank¬analysen der abgeleiteten Aminosäuresequenzen ergeben sowohl für die Luziferase als auch für das Luziferin regenerierende Enzym Ähnlichkeiten zu den entsprechenden Proteinen aus Leuchtkäfern, wie z. B. Photinus pyralis. Ausgehend von der cDNA wurden zunächst beide Enzyme in E. coli rekombinant exprimiert und affinitätschromatographisch aufgereinigt. Für die Luziferase gelang es, spezifische Antikörper herzustellen, die im Anschluss an den im Western Blot durchgeführten Nachweis eine Identifizierung in histologischen Schwamm¬schnitten ermöglichte. Weitere Analysen konnten für Suberites domuncula sowohl im Schwammgewebe, im Proteinextrakt als auch für das rekombinante Protein die Licht-generierende Fähigkeit nachweisen. Das ermittelte in vitro Biolumineszenz-Emissionsspektrum der rekombinanten Luziferase weist eine Lichtemission im gelb-grünen Bereich des Spektrums mit einem Maximum bei 548 nm und einer Schulter bei 590 nm auf. Ausserdem bestätigte die Funktionanalyse des rekombinanten Enzyms die für Luziferasen bekannte ATP- und Temperatur¬abhängigkeit sowie den stimulierenden Effekt von Coenzym A. Die Existenz einer bioaktiven Luziferase in einem der ältesten, rezent vertretenen Metazoa deutet darauf hin, dass sich die Oxygenasefunktion der Luziferasen bereits früher entwickelte, als bisher von Viviani* vermutet. Die bisherigen Daten über die optischen Eigenschaften der Spiculae liefern gemeinsam mit den Ergebnissen dieser Arbeit – einer Licht-emittierenden Luziferase in S. domuncula – die Voraussetzungen für die mögliche Existenz eines Photorezeptionssystems in Schwämmen.

Studio di leds con diverse densita di dislocazioni tramite l'analisi del coefficiente di poole-frenkel

E' stato considerato un High-Dislocation Density Light Emitting Diode (HDD LED)ed è stato analizzato l'andamento di corrente a varie temperature. Dai risultati ottenuti è stato possibile ricavare il coefficiente di Poole-Frenkel, e da esso risalire alla densità di dislocazioni del dispositivo.

Triphenylene-based polymers for organic electronics

An efficient synthesis has been developed toward a novel series of conjugated blue emitting polymers containing triphenylene as repeating unit for polymer light emitting diodes (PLEDs). Soluble triphenylene-based co- and homo-polymers have been synthesized by the palladium-catalyzed Suzuki-Miyaura and the nickel-catalysed Yamamoto polycondensation reactions, respectively. The photophysical properties as well as the application of the polymers in PLED devices are presented here.rnIn addition a simple GNR fabrication method that allows for the production of atomically precise GNRs of different topologies and widths is introduced. This bottom-up approach consists in the surface-assisted coupling of suitably designed molecular triphenylene precursors into linear polyphenylenes and their subsequent cyclodehydrogenation and results in GNRs whose topology, width and edge periphery are defined by the precursor monomers. Various types of atomically precise GNRs thus eventually become available for experimental investigation and exploitation of their many predicted and technologically highly interesting properties. Furthermore, it is anticipated that this bottom-up approach of GNR fabrication will allow the engineering of chemical and electronic properties and the yet elusive realization of theoretically predicted structures such as intraribbon quantum dots, superlattice structures, or magnetic devices based on specific GNR edge states.rn

Übergangsmomente zwischen angeregten Zuständen mit der RI-CC2-Methode: Implementierung und Anwendung auf Triplett-Excimere

Die Themengebiete dieser Arbeit umfassen sowohl methodische Weiterentwicklungen im Rahmen der ab initio zweiter Ordnungsmethoden CC2 und ADC(2) als auch Anwendungen dieser Weiterentwick-lungen auf aktuelle Fragestellungen. Die methodischen Erweiterungen stehen dabei hauptsächlich im Zusammenhang mit Übergangsmomenten zwischen angeregten Zuständen. Durch die Implementie-rung der selbigen ist nun die Berechnung transienter Absorptionsspektren möglich. Die Anwendungen behandeln vorwiegend das Feld der organischen Halbleiter und deren photo-elektronische Eigen-schaften. Dabei spielen die bislang wenig erforschten Triplett-Excimere eine zentrale Rolle.rnDie Übergangsmomente zwischen angeregten Zuständen wurden in das Programmpaket TUR-BOMOLE implementiert. Dadurch wurde die Berechnung der Übergangsmomente zwischen Zustän-den gleicher Multiplizität (d.h. sowohl Singulett-Singulett- als auch Triplett-Triplett-Übergänge) und unterschiedlicher Multiplizität (also Singulett-Triplett-Übergänge) möglich. Als Erweiterung wurde durch ein Interface zum ORCA Programm die Berechnung von Spin-Orbit-Matrixelementen (SOMEs) implementiert. Des Weiteren kann man mit dieser Implementierung auch Übergänge in offenschaligen Systemen berechnen. Um den Speicherbedarf und die Rechenzeit möglichst gering zu halten wurde die resolution-of-the-identity (RI-) Näherung benutzt. Damit lässt sich der Speicherbedarf von O(N4) auf O(N3) reduzieren, da die mit O(N4) skalierenden Größen (z. B. die T2-Amplituden) sehr effizient aus RI-Intermediaten berechnet werden können und daher nicht abgespeichert werden müssen. Dadurch wird eine Berechnung für mittelgroße Moleküle (ca. 20-50 Atome) mit einer angemessenen Basis möglich.rnDie Genauigkeit der Übergangsmomente zwischen angeregten Zuständen wurde für einen Testsatz kleiner Moleküle sowie für ausgewählte größere organische Moleküle getestet. Dabei stellte sich her-aus, dass der Fehler der RI-Näherung sehr klein ist. Die Vorhersage der transienten Spektren mit CC2 bzw. ADC(2) birgt allerdings ein Problem, da diese Methoden solche Zustände nur sehr unzureichend beschreiben, welche hauptsächlich durch zweifach-Anregungen bezüglich der Referenzdeterminante erzeugt werden. Dies ist für die Spektren aus dem angeregten Zustand relevant, da Übergänge zu diesen Zuständen energetisch zugänglich und erlaubt sein können. Ein Beispiel dafür wird anhand eines Singulett-Singulett-Spektrums in der vorliegenden Arbeit diskutiert. Für die Übergänge zwischen Triplettzuständen ist dies allerdings weniger problematisch, da die energetisch niedrigsten Doppelan-regungen geschlossenschalig sind und daher für Tripletts nicht auftreten.rnVon besonderem Interesse für diese Arbeit ist die Bildung von Excimeren im angeregten Triplettzu-stand. Diese können aufgrund starker Wechselwirkungen zwischen den π-Elektronensystemen großer organischer Moleküle auftreten, wie sie zum Beispiel als organische Halbleiter in organischen Leucht-dioden eingesetzt werden. Dabei können die Excimere die photo-elktronischen Eigenschaften dieser Substanzen signifikant beeinflussen. Im Rahmen dieser Dissertation wurden daher zwei solcher Sys-teme untersucht, [3.3](4,4’)Biphenylophan und das Naphthalin-Dimer. Hierzu wurden die transienten Anregungsspektren aus dem ersten angeregten Triplettzustand berechnet und diese Ergebnisse für die Interpretation der experimentellen Spektren herangezogen. Aufgrund der guten Übereinstimmung zwischen den berechneten und den experimentellen Spektren konnte gezeigt werden, dass es für eine koplanare Anordnung der beiden Monomere zu einer starken Kopplung zwischen lokal angereg-ten und charge-transfer Zuständen kommt. Diese Kopplung resultiert in einer signifikanten energeti-schen Absenkung des ersten angeregten Zustandes und zu einem sehr geringen Abstand zwischen den Monomereinheiten. Dabei ist der angeregte Zustand über beide Monomere delokalisiert. Die star-ke Kopplung tritt bei einem intermolekularen Abstand ≤4 Å auf, was einem typischen Abstand in orga-nischen Halbleitern entspricht. In diesem Bereich kann man zur Berechnung dieser Systeme nicht auf die Förster-Dexter-Theorie zurückgreifen, da diese nur für den Grenzfall der schwachen Kopplung gültig ist.

Trasporto di carica in cristalli organici semiconduttori

Uno dei settori che più si stanno sviluppando nell'ambito della ricerca applicata è senza dubbio quello dell'elettronica organica. Nello specifico lo studio è sospinto dagli indubbi vantaggi che questi dispositivi porterebbero se venissero prodotti su larga scala: basso costo, semplicità realizzativa, leggerezza, flessibilità ed estensione. È da sottolineare che dispositivi basati su materiali organici sono già stati realizzati: si parla di OLED (Organic Light Emitting Diode) LED realizzati sfruttando le proprietà di elettroluminescenza di alcuni materiali organici, OFET (Organig Field Effect Transistor) transistor costruiti con semiconduttori organici, financo celle solari che sfruttano le buone proprietà ottiche di questi composti. Oggetto di analisi di questa tesi è lo studio delle proprietà di trasporto di alcuni cristalli organici, al fine di estrapolarne la mobilità intrinseca e verificare come essa cambi se sottoposti a radiazione x. I due cristalli su cui si è focalizzata questa trattazione sono il 1,5-Dinitronaphtalene e il 2,4-Dinitronaphtol; su di essi è stata eseguita una caratterizzazione ottica e una elettrica, in seguito interpretate con il modello SCLC (Space Charge Limited Current). I risultati ottenuti mostrano che c'è una differenza apprezzabile nella mobilità nei due casi con e senza irraggiamento con raggi x.

Novel porphyrin amino acids as building blocks for artificial photosynthetic reaction centers : photoinduced energy and electron transfer

This thesis reports on the synthesis and characterisation of trans-(M)AB2C meso-substituted porphyrin amino acid esters (PAr) (M = 2H or Zn) with tunable electron donating and electron withdrawing Ar substituents at B positions (Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5). These porphyrins were used as key building blocks for photosynthetic LHC (LHC = light-harvesting antenna complex) and RC (RC = reaction center) model compounds.rnBased on free-base or zinc(II) porphyrin amino acid esters and porphyrin acids several amide linked free-base bis(porphyrins) PAr1-PAr2 (Ar1 = 2,4,6-C6H2Me3, C6F5 and Ar2 = 2,4,6-C6H2Me3, 4-C6H4F, 4-C6H4CF3, C6F5), mono metallated bis(porphyrin) PAr1-(Zn)PAr2 (Ar1 = 2,4,6-C6H2Me3 and Ar2 =4-C6H4F) and its doubly zincated complexes (Zn)PAr1-(Zn)PAr2 were prepared. In the fluorescence spectra of free-base bis(porphyrins) the porphyrin with the strongest electron donating power of Ar substituents at B positions is the light emitting unity. The emission of mono metallated bis(porphyrin) occurs only from the free-base porphyrin building block. This phenomenon is caused by an efficient energy transfer likely via the Dexter through-bond mechanism.rnLinking of anthraquinone (Q) as electron acceptor (A) to the N-terminus of porphyrin amino acid esters ((M)PAr) and aminoferrocene (Fc) as electron donor (D) to the C-terminus of the porphyrin resulting in Q-(M)PAr-Fc triads (M = 2H or Zn, Ar = 4-C6H4OnBu, 4-C6H4OMe, 2,4,6-C6H2Me3, 4-C6H4Me, C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) with tunable electron density at the porphyrin chromophore. In these triads initial oxidative PET (Q←(M)PAr) and reductive PET ((M)PAr→Fc) (PET = photoinduced electron transfer) are possible. Both processes leads to an emission quenching of (M)PAr. The efficiency of the PET pathways occurring in the Marcus normal region is controlled by the specific porphyrin electron density.rnAmide-linked conjugates PAr-Fc (Ar = 2,4,6-C6H2Me3, C6F5) and Fmoc-Fc-PAr1 (N-Fmoc-Fc = N-Fmoc protected 1,1’-ferrocene amino acid; Ar1 = C6H5, 4-C6H4F, 4-C6H4CF3, C6F5) as well as hinges PAr2-Fc-PAr1 (Ar1 = C6H5, 4-C6H4F and Ar2 = 2,4,6-C6H2Me3) were studied with respect to the reductive PET. The PET driving force (−GET) in dyads increases with the increasing electron withdrawing character of Ar substituents. Additionally, intramolecular energy transfer between porphyrins PAr1 and PAr2 is feasible in the hinges via the Förster mechanism.rn

Dotierte Nanographenstreifen mit definierten Randstrukturen

Die in der vorliegenden Dissertation entwickelten organochemischen Protokolle und Konzepte erweitern die Bottom-Up-Synthese von atompräzisen Nanographenstreifen (GNR) um zwei fundamentale Bereiche. Zum einen die Dotierung der halbleitenden GNR mit Schwefel oder Stickstoffatomen und zum anderen ein Protokoll für eine lösungsbasierte Synthese von stickstoffdotierten Zickzack-Streifen.rnDie Dotierung von GNR beinhaltet die Synthese von monomeren Bausteinen bei denen, im Gegensatz zu ihren reinen Kohlenstoffhomologen, definierte Positionen am Rand mit zwei oder vier Stickstoff- beziehungsweise zwei Schwefelatomen ersetzt wurden. Die Synthese atompräziser GNR konnte mit verschiedenen experimentellen Methoden analysiert und anschaulich über STM visualisiert werden. Neben einer n-Dotierung gelang so auch erstmals eine Bottom-Up-Synthese von schwefeldotierten GNR. Eine mögliche Anwendung in der Nanoelektronik aufbauend auf dotierten GNR wurde bestätigt, indem durch Co-Polymerisation von stickstoffhaltigen mit reinen Kohlenstoffmonomeren Heteroschnittstellen zwischen dotierten und undotierten Bereichen hergestellt werden konnten. Solche Heteroschnittstellen sind fundamentale Grundlage von Dioden und damit Basis einer Vielzahl elektronischer Elemente wie Solarzellen oder Leuchtdioden.rnWährend für halbleitende GNR mit einer Armlehnen-Form ein breites Spektrum an organischen Syntheseprotokollen zur Verfügung stand, existierte zu Beginn dieser Arbeit keines für GNR mit Zickzack-Struktur. Innerhalb dieser Arbeit konnte eine Bottom-Up-Synthese zur Erschließung stickstoffdotierter GNR mit Zickzack-Randstruktur erarbeitet werden. Durch die Verwendung eines (2-Hydroxymethyl)phenylboronsäureesters werden Hydroxymethylsubsituenten entlang eines Polyphenylenrückgrats eingebaut, die nach Kondensation mit dem Stickstoffatom eine Zickzack-Kante ergeben. Innerhalb der synthetisierten Zielstrukturen kann das 9a-Azaphenalen als letztes, bislang nicht erschlossenes Isomer der Azaphenalene, als wiederkehrende Struktur, gefunden werden. Die Reaktivität der Zickzackkante konnte zudem zum Aufbau einer Vielzahl bislang unzugänglicher, polycyclischer Heteroaromaten über 1,3-dipolare Addition dieses polycyclischen Azomethin Ylides (PAMY) genutzt werden.rn

Sintesi di complessi luminescenti anionici di Ir(III)

Negli ultimi anni si è osservato un crescente sviluppo della ricerca nel campo dei materiali luminescenti per le loro diverse applicazioni reali e potenziali, fra cui l’impiego in dispositivi elettroluminescenti, quali OLEDs (Organic Light-Emitting Diodes) e LECs (Light-Emitting Electrochemical Cells). In modo particolare, si rivolge grande attenzione ai complessi ciclometallati di Ir(III) grazie alle peculiari caratteristiche che li contraddistinguono fra i materiali luminescenti, come l'emissione fosforescente, alte rese quantiche di emissione, lunghi tempi di vita e buona stabilità nei dispositivi. Oltre a tali caratteristiche uno dei principali vantaggi presentati dai complessi di Ir(III) è la possibilità di modulare la lunghezza d'onda di emissione modificando la struttura dei leganti ciclometallanti e ancillari. Considerata la versatilità di questi sistemi e la loro conseguente rilevanza, diverse sono state le strategie applicate per l'ottenimento di complessi di Ir(III) generalmente neutri e cationici; al contrario pochi esempi di complessi di Ir(III) anionici sono attualmente riportati in letteratura. Lo scopo del mio lavoro di tesi è stato quindi quello di sintetizzare tre nuovi complessi anionici luminescenti di Ir(III) con tre diversi leganti ciclometallanti. Il piano di lavoro è stato suddiviso in stadi successivi, partendo dalla sintesi dei tre leganti ciclometallanti, impiegati poi nella preparazione dei dimeri di Ir(III) precursori dei miei complessi; infine facendo reagire questi ultimi con un legante ancillare bisanionico, derivato dal di(1H-tetrazol-5-il)metano, si è giunti all'ottenimento di tre complessi anionici luminescenti di Ir(III). Dopo questa prima parte, il lavoro di tesi è proseguito con la caratterizzazione spettroscopica dei tre complessi anionici e la determinazione delle loro proprietà fotofisiche tramite la registrazione di spettri di assorbimento, di emissione e la determinazione delle rese quantiche di emissione e dei tempi di vita. Infine si è preparato un “soft salt” costituito da un complesso anionico e uno cationico di Ir(III) le cui caratteristiche sono tutt'ora oggetto di studio del gruppo di ricerca presso il quale ho svolto il mio lavoro di tesi.

Curing lights for orthodontic bonding: a systematic review and meta-analysis

INTRODUCTION Light cure of resin-based adhesives is the mainstay of orthodontic bonding. In recent years, alternatives to conventional halogen lights offering reduced curing time and the potential for lower attachment failure rates have emerged. The relative merits of curing lights in current use, including halogen-based lamps, light-emitting diodes (LEDs), and plasma arc lights, have not been analyzed systematically. In this study, we reviewed randomized controlled trials and controlled clinical trials to assess the risks of attachment failure and bonding time in orthodontic patients in whom brackets were cured with halogen lights, LEDs, or plasma arc systems. METHODS Multiple electronic database searches were undertaken, including MEDLINE, EMBASE, and the Cochrane Oral Health Group's Trials Register, CENTRAL. Language restrictions were not applied. Unpublished literature was searched on ClinicalTrials.gov, the National Research Register, Pro-Quest Dissertation Abstracts, and Thesis database. Search terms included randomized controlled trial, controlled clinical trial, random allocation, double blind method, single blind method, orthodontics, LED, halogen, bond, and bracket. Authors of primary studies were contacted as required, and reference lists of the included studies were screened. RESULTS Randomized controlled trials and clinical controlled trials directly comparing conventional halogen lights, LEDs, or plasma arc systems involving patients with full arch, fixed, or bonded orthodontic appliances (not banded) with follow-up periods of a minimum of 6 months were included. Using predefined forms, 2 authors undertook independent extraction of articles; disagreements were resolved by discussion. The assessment of the risk of bias of the randomized controlled trials was based on the Cochrane Risk of Bias tool. Ten studies met the inclusion criteria; 2 were excluded because of high risk of bias. In the comparison of bond failure risk with halogen lights and plasma arc lights, 1851 brackets were included in both groups. Little statistical heterogeneity was observed in this analysis (I(2) = 4.8%; P = 0.379). There was no statistical difference in bond failure risk between the groups (OR, 0.92; 95% CI, 0.68-1.23; prediction intervals, 0.54, 1.56). Similarly, no statistical difference in bond failure risk was observed in the meta-analysis comparing halogen lights and LEDs (OR, 0.96; 95% CI, 0.64-1.44; prediction intervals, 0.07, 13.32). The pooled estimates from both comparisons were OR, 0.93; 95% CI, 0.74-1.17; and prediction intervals, 0.69, 1.17. CONCLUSIONS There is no evidence to support the use of 1 light cure type over another based on risk of attachment failure.

Formation of supramolecular polymers by chrysene oligomers

Supramolecular assembly of π-conjugated systems is of large interested due to the possibility to use them in electronic devices.[1] Chrysene is a polyaromatic hydrocarbon which has been studied e.g for organic light-emitting diodes (OLEDs).[2] In continuation of our previous work involving the supramolecular polymerisation of pyrene oligomers [3] an oligomer consisting of three chrysenes linked by phophodiesters was synthesised (Chry3). UV-Vis measurements show that aggregates of Chry3 are formed in aqueous medium. This is illustrated by general hypochromicity, a change in vibronic band intensities and, in particular, the appearance of a red-shifted absorption band in the S0 → S2 transition. The data suggest the formation of J-aggregates. The formation of supramolecular polymers is further studied by temperature-dependent absorption- and fluorescence measurements, and by atomic force microscopy (AFM).

Establishing a fiber-optic-based optical neural interface.

Selective expression of opsins in genetically defined neurons makes it possible to control a subset of neurons without affecting nearby cells and processes in the intact brain, but light must still be delivered to the target brain structure. Light scattering limits the delivery of light from the surface of the brain. For this reason, we have developed a fiber-optic-based optical neural interface (ONI), which allows optical access to any brain structure in freely moving mammals. The ONI system is constructed by modifying the small animal cannula system from PlasticsOne. The system for bilateral stimulation consists of a bilateral cannula guide that has been stereotactically implanted over the target brain region, a screw cap for securing the optical fiber to the animal's head, a fiber guard modified from the internal cannula adapter, and a bare fiber whose length is customized based on the depth of the target region. For unilateral stimulation, a single-fiber system can be constructed using unilateral cannula parts from PlasticsOne. We describe here the preparation of the bilateral ONI system and its use in optical stimulation of the mouse or rat brain. Delivery of opsin-expressing virus and implantation of the ONI may be conducted in the same surgical session; alternatively, with a transgenic animal no opsin virus is delivered during the surgery. Similar procedures are useful for deep or superficial injections (even for neocortical targets, although in some cases surface light-emitting diodes or cortex-apposed fibers can be used for the most superficial cortical targets).

Periodontal and peri-implant wound healing following laser therapy

Laser irradiation has numerous favorable characteristics, such as ablation or vaporization, hemostasis, biostimulation (photobiomodulation) and microbial inhibition and destruction, which induce various beneficial therapeutic effects and biological responses. Therefore, the use of lasers is considered effective and suitable for treating a variety of inflammatory and infectious oral conditions. The CO2 , neodymium-doped yttrium-aluminium-garnet (Nd:YAG) and diode lasers have mainly been used for periodontal soft-tissue management. With development of the erbium-doped yttrium-aluminium-garnet (Er:YAG) and erbium, chromium-doped yttrium-scandium-gallium-garnet (Er,Cr:YSGG) lasers, which can be applied not only on soft tissues but also on dental hard tissues, the application of lasers dramatically expanded from periodontal soft-tissue management to hard-tissue treatment. Currently, various periodontal tissues (such as gingiva, tooth roots and bone tissue), as well as titanium implant surfaces, can be treated with lasers, and a variety of dental laser systems are being employed for the management of periodontal and peri-implant diseases. In periodontics, mechanical therapy has conventionally been the mainstream of treatment; however, complete bacterial eradication and/or optimal wound healing may not be necessarily achieved with conventional mechanical therapy alone. Consequently, in addition to chemotherapy consisting of antibiotics and anti-inflammatory agents, phototherapy using lasers and light-emitting diodes has been gradually integrated with mechanical therapy to enhance subsequent wound healing by achieving thorough debridement, decontamination and tissue stimulation. With increasing evidence of benefits, therapies with low- and high-level lasers play an important role in wound healing/tissue regeneration in the treatment of periodontal and peri-implant diseases. This article discusses the outcomes of laser therapy in soft-tissue management, periodontal nonsurgical and surgical treatment, osseous surgery and peri-implant treatment, focusing on postoperative wound healing of periodontal and peri-implant tissues, based on scientific evidence from currently available basic and clinical studies, as well as on case reports.

Evidence of charge carrier number fluctuations in InN thin films?

Due to its small band-gap and its high mobility, InN is a promising material for a large number of key applications like band-gap engineering for high efficiency solar cells, light emitting diodes, and high speed devices. Unfortunately, it has been reported that this material exhibits strong surface charge accumulation which may depend on the type of surface. Current investigations are conducted in order to explain the mechanisms which govern such a behavior and to look for ways of avoiding it and/or finding applications that may use such an effect. In this framework, low frequency noise measurements have been performed at different temperatures on patterned MBE grown InN layers. The evolution of the 1/f noise level with temperature in the 77 K-300 K range is consistent with carrier number fluctuations thus indicating surface mechanisms: the surface charge accumulation is confirmed by the noise measurements.

E-beam nanopatterning for the selective area growth of III-V nitride nanorods

GaN/InGaN nanorods have attracted much scientific interest during the last decade because of their unique optical and electrical properties [1,2]. The high crystal quality and the absence of extended defects make them ideal candidates for the fabrication of high efficiency opto-electronic devices such as nano-photodetectors, light-emitting diodes, and solar cells [1-3]. Nitrides nanorods are commonly grown in the self-assembled mode by plasma-assisted molecular beam epitaxy (MBE) [4]. However, self-assembled nanorods are characterized by inhomogeneous heights and diameters, which render the device processing very difficult and negatively affect the electronic transport properties of the final device. For this reason, the selective area growth (SAG) mode has been proposed, where the nanorods preferentially grow on pre-defined sites on a pre-patterned substrate [5].