Living benthic foraminifers from the central Arctic Ocean

Fifty short sediment cores collected with a multiple corer and five box cores from the central Arctic Ocean were analysed to study the ecology and distribution of benthic foraminifers. To work out living faunal associations, standing stock and diversity, separate analyses of living (Rose Bengal stained) and dead foraminifers were carried out for the sediment surface. The size fractions between 63 and 125 µm and >125 µm were counted separately to allow comparison with former Arctic studies and with studies from the adjacent Norwegian-Greenland Sea, Barents Sea and the North Atlantic Ocean. Benthic foraminiferal associations are mainly controlled by the availability of food, and competition for food, while water mass characteristics, bottom current activity, substrate composition, and water depth are of minor importance. Off Spitsbergen in seasonally ice-free areas, high primary production rates are reflected by high standing stocks, high diversities, and foraminiferal associations (>125 µm) that are similar to those of the Norwegian-Greenland Sea. Generally, in seasonally ice-free areas standing stock and diversity increase with increasing food supply. In the central Arctic Ocean, the oligotrophic permanently ice-covered areas are dominated by epibenthic species. The limited food availability is reflected by very low standing stocks and low diversities. Most of these foraminiferal associations do not correspond to those of the Norwegian-Greenland Sea. The dominant associations include simple agglutinated species such as Sorosphaerae, Placopsilinellae, Komokiacea and Aschemonellae, as well as small calcareous species such as Stetsonia horvathi and Epistominella arctica. Those of the foraminiferal species that usually thrive under seasonally ice-free conditions in middle bathyal to lower bathyal water depth are found under permanently ice-covered conditions in water depths about 1000 m shallower, if present at all.

"Lancea", Lusitanian Word, and the "Lancienses" Ethnogenesis

Analysis of the word lancea, of Hispanic origin after Varro, and of place names, people´s names and personal names derived from it. It confirms that the spear was the most important weapon in the Bronze Age, belonging to the iuventus and used as heroic and divine symbol. This analysis confirms also the personality of the Lusitanians, a people related to the Celts but with more archaic archaeological, linguistic and cultural characteristics originated in the tradition of the Atlantic Bronze in the II millennium BC. It is also relevant to better know the organisation of Broze and Iron Age societies and the origin of Indo-Europeans peoples in Western Europe and of pre-Roman peoples of Iberia.

Profesionales de la educación en la Hispania romana

La epigrafía latina nos ha legado el recuerdo de doce docentes y un grupo de maestros de escuela en Hispania. Los diferentes textos, la mayoría de carácter funerario y procedente del ámbito urbano, nos aportan información acerca de las funciones que estos profesionales desempeñaron en la sociedad hispana, así como del contexto socio-jurídico del que provenían. En este sentido, la pieza más valiosa es la inscripción dedicada a un gramático llamado L. Memmius Probus en la antigua Tritium Magallum, gracias a la cual conocemos las circunstancias concretas en las que trabajó este educador.

Modèles de dépendance hiérarchique pour l’évaluation des passifs et la tarification en actuariat

Dans cette thèse on s’intéresse à la modélisation de la dépendance entre les risques en assurance non-vie, plus particulièrement dans le cadre des méthodes de provisionnement et en tarification. On expose le contexte actuel et les enjeux liés à la modélisation de la dépendance et l’importance d’une telle approche avec l’avènement des nouvelles normes et exigences des organismes réglementaires quant à la solvabilité des compagnies d’assurances générales. Récemment, Shi et Frees (2011) suggère d’incorporer la dépendance entre deux lignes d’affaires à travers une copule bivariée qui capture la dépendance entre deux cellules équivalentes de deux triangles de développement. Nous proposons deux approches différentes pour généraliser ce modèle. La première est basée sur les copules archimédiennes hiérarchiques, et la deuxième sur les effets aléatoires et la famille de distributions bivariées Sarmanov. Nous nous intéressons dans un premier temps, au Chapitre 2, à un modèle utilisant la classe des copules archimédiennes hiérarchiques, plus précisément la famille des copules partiellement imbriquées, afin d’inclure la dépendance à l’intérieur et entre deux lignes d’affaires à travers les effets calendaires. Par la suite, on considère un modèle alternatif, issu d’une autre classe de la famille des copules archimédiennes hiérarchiques, celle des copules totalement imbriquées, afin de modéliser la dépendance entre plus de deux lignes d’affaires. Une approche avec agrégation des risques basée sur un modèle formé d’une arborescence de copules bivariées y est également explorée. Une particularité importante de l’approche décrite au Chapitre 3 est que l’inférence au niveau de la dépendance se fait à travers les rangs des résidus, afin de pallier un éventuel risque de mauvaise spécification des lois marginales et de la copule régissant la dépendance. Comme deuxième approche, on s’intéresse également à la modélisation de la dépendance à travers des effets aléatoires. Pour ce faire, on considère la famille de distributions bivariées Sarmanov qui permet une modélisation flexible à l’intérieur et entre les lignes d’affaires, à travers les effets d’années de calendrier, années d’accident et périodes de développement. Des expressions fermées de la distribution jointe, ainsi qu’une illustration empirique avec des triangles de développement sont présentées au Chapitre 4. Aussi, nous proposons un modèle avec effets aléatoires dynamiques, où l’on donne plus de poids aux années les plus récentes, et utilisons l’information de la ligne corrélée afin d’effectuer une meilleure prédiction du risque. Cette dernière approche sera étudiée au Chapitre 5, à travers une application numérique sur les nombres de réclamations, illustrant l’utilité d’un tel modèle dans le cadre de la tarification. On conclut cette thèse par un rappel sur les contributions scientifiques de cette thèse, tout en proposant des angles d’ouvertures et des possibilités d’extension de ces travaux.

Entre o pessoal e o histórico: as epígrafes na obra de Yêda Schmaltz

v. 19, n. 2, p. 191-210, jul./dez. 2015.

Probabilistic Graphical Modelling for Software Product Lines: A Frameweork for Modeling and Reasoning under Uncertainty

This work provides a holistic investigation into the realm of feature modeling within software product lines. The work presented identifies limitations and challenges within the current feature modeling approaches. Those limitations include, but not limited to, the dearth of satisfactory cognitive presentation, inconveniency in scalable systems, inflexibility in adapting changes, nonexistence of predictability of models behavior, as well as the lack of probabilistic quantification of model’s implications and decision support for reasoning under uncertainty. The work in this thesis addresses these challenges by proposing a series of solutions. The first solution is the construction of a Bayesian Belief Feature Model, which is a novel modeling approach capable of quantifying the uncertainty measures in model parameters by a means of incorporating probabilistic modeling with a conventional modeling approach. The Bayesian Belief feature model presents a new enhanced feature modeling approach in terms of truth quantification and visual expressiveness. The second solution takes into consideration the unclear support for the reasoning under the uncertainty process, and the challenging constraint satisfaction problem in software product lines. This has been done through the development of a mathematical reasoner, which was designed to satisfy the model constraints by considering probability weight for all involved parameters and quantify the actual implications of the problem constraints. The developed Uncertain Constraint Satisfaction Problem approach has been tested and validated through a set of designated experiments. Profoundly stating, the main contributions of this thesis include the following: • Develop a framework for probabilistic graphical modeling to build the purported Bayesian belief feature model. • Extend the model to enhance visual expressiveness throughout the integration of colour degree variation; in which the colour varies with respect to the predefined probabilistic weights. • Enhance the constraints satisfaction problem by the uncertainty measuring of the parameters truth assumption. • Validate the developed approach against different experimental settings to determine its functionality and performance.

Study and comparison on freshwater snail fauna in the paddy fields and related river and lake (Babolroad & Parishan) water supply in Mazandaran & Frace provinces of Iran

As a result of this investigation, for the first time from Babolroud river in Iran is 15 species identified, which they belong to 8 genera, from 7 families. The most and least distribution, 13 and 5 species, belong to Miandasht and Rostaye Anarestane Babol stations respectively, which they are 50 kilometers away from each other. Also 20 species belong to 10 genera from 6 families were identified in Parishan lake. The most the distribution belong to stations 1 and 5 with 6 and 18 species respectively. The most commonly distributed family is Lymnaeidae with 6 species: Lyamnaea truncatula, L. auricularia, L. palustris, L. pereger, L. stagnalis and L. gedrosiana, which L. trancatula is identified as the most frequent and has medical importance. L. stagnalis is identified to be the most important to agriculture. Planorbis planorhis, Physa acuta, Lymnaea pereger, Bithynia tenculata and Vavata piscinalis are reported for the first time from this region.

The status of weed biological control in Vanuatu

Biological control of weeds in Vanuatu began in 1935, with the introduction of the tingid Teleonemia scrupulosa to control Lantana camara. To date, nine biological control agents have been intentionally introduced to control eight weed species. Seven of these agents have established on their respective hosts while an eighth, Zygogramma bicolorata, an agent for Parthenium hysterophorus has only recently been released and establishment is unlikely. The fate of a ninth agent, Heteropsylla spinulosa, released for the control of Mimosa diplotricha is unclear. Six other biological control agents, including Epiblema strenuana which was first detected in 2014 on P. hysterophorus on Efate have spread into the country unintentionally. Control of the target weeds range from inadequate to very good. By far the most successful agent has been Calligrapha pantherina which was introduced to control Sida acuta and Sida rhombifolia. The beetle was released on 14 islands and managed to spread to at least another 10 islands where it has effectively controlled both Sida spp. Control of the two water weeds, Eichhornia crassipes by Neochetina bruchi and N. eichhorniae and Pistia stratiotes by Neohydronomus affinis, has also been fairly good in most areas. Two agents, T. scrupulosa and Uroplata girardi, were released on L. camara, and four other agents have been found on the weed, but L. camara is still not under adequate control. The rust Puccinia spegazzinii was first released on Mikania micrantha in 2012 and successfully established. Anecdotal evidence suggests that it is having an impact on M. micrantha, but detailed monitoring is required to determine its overall impact. Future prospects for weed biological control in Vanuatu are positive, with the expected greater spread of recently released agents and the introduction of new agents for P. hysterophorus, L. camara, Dolichandra unguis-cati and Spathodea campanulata.

Biological control of weeds in the 22 Pacific island countries and territories: current status and future prospects

Biological control of introduced weeds in the 22 Pacific island countries and territories (PICTs) began in 1911, with the lantana seed-feeding fly introduced into Fiji and New Caledonia from Hawaii. To date, a total of 62 agents have been deliberately introduced into the PICTs to control 21 weed species in 17 countries. A further two agents have spread naturally into the region. The general impact of the 36 biocontrol agents now established in the PICTs ranges from none to complete control of their target weed(s). Fiji has been most active in weed biocontrol, releasing 30 agents against 11 weed species. Papua New Guinea, Guam, and the Federated States of Micronesia have also been very active in weed biocontrol. For some weeds such as Lantana camara, agents have been released widely, and can now be found in 15 of the 21 PICTs in which the weed occurs. However, agents for other commonly found weeds, such as Sida acuta, have been released in only a few countries in which the weed is present. There are many safe and effective biocontrol agents already in the Pacific that could be utilised more widely, and highly effective agents that have been released elsewhere in the world that could be introduced following some additional host specificity testing. This paper discusses the current status of biological control efforts against introduced weeds in the 22 PICTs and reviews options that could be considered by countries wishing to initiate weed biological control programmes.

Three dimensional study to quantify the relationship between facial hard and soft tissue movement as a result of orthognathic surgery

Introduction Prediction of soft tissue changes following orthognathic surgery has been frequently attempted in the past decades. It has gradually progressed from the classic “cut and paste” of photographs to the computer assisted 2D surgical prediction planning; and finally, comprehensive 3D surgical planning was introduced to help surgeons and patients to decide on the magnitude and direction of surgical movements as well as the type of surgery to be considered for the correction of facial dysmorphology. A wealth of experience was gained and numerous published literature is available which has augmented the knowledge of facial soft tissue behaviour and helped to improve the ability to closely simulate facial changes following orthognathic surgery. This was particularly noticed following the introduction of the three dimensional imaging into the medical research and clinical applications. Several approaches have been considered to mathematically predict soft tissue changes in three dimensions, following orthognathic surgery. The most common are the Finite element model and Mass tensor Model. These were developed into software packages which are currently used in clinical practice. In general, these methods produce an acceptable level of prediction accuracy of soft tissue changes following orthognathic surgery. Studies, however, have shown a limited prediction accuracy at specific regions of the face, in particular the areas around the lips. Aims The aim of this project is to conduct a comprehensive assessment of hard and soft tissue changes following orthognathic surgery and introduce a new method for prediction of facial soft tissue changes.   Methodology The study was carried out on the pre- and post-operative CBCT images of 100 patients who received their orthognathic surgery treatment at Glasgow dental hospital and school, Glasgow, UK. Three groups of patients were included in the analysis; patients who underwent Le Fort I maxillary advancement surgery; bilateral sagittal split mandibular advancement surgery or bimaxillary advancement surgery. A generic facial mesh was used to standardise the information obtained from individual patient’s facial image and Principal component analysis (PCA) was applied to interpolate the correlations between the skeletal surgical displacement and the resultant soft tissue changes. The identified relationship between hard tissue and soft tissue was then applied on a new set of preoperative 3D facial images and the predicted results were compared to the actual surgical changes measured from their post-operative 3D facial images. A set of validation studies was conducted. To include: • Comparison between voxel based registration and surface registration to analyse changes following orthognathic surgery. The results showed there was no statistically significant difference between the two methods. Voxel based registration, however, showed more reliability as it preserved the link between the soft tissue and skeletal structures of the face during the image registration process. Accordingly, voxel based registration was the method of choice for superimposition of the pre- and post-operative images. The result of this study was published in a refereed journal. • Direct DICOM slice landmarking; a novel technique to quantify the direction and magnitude of skeletal surgical movements. This method represents a new approach to quantify maxillary and mandibular surgical displacement in three dimensions. The technique includes measuring the distance of corresponding landmarks digitized directly on DICOM image slices in relation to three dimensional reference planes. The accuracy of the measurements was assessed against a set of “gold standard” measurements extracted from simulated model surgery. The results confirmed the accuracy of the method within 0.34mm. Therefore, the method was applied in this study. The results of this validation were published in a peer refereed journal. • The use of a generic mesh to assess soft tissue changes using stereophotogrammetry. The generic facial mesh played a major role in the soft tissue dense correspondence analysis. The conformed generic mesh represented the geometrical information of the individual’s facial mesh on which it was conformed (elastically deformed). Therefore, the accuracy of generic mesh conformation is essential to guarantee an accurate replica of the individual facial characteristics. The results showed an acceptable overall mean error of the conformation of generic mesh 1 mm. The results of this study were accepted for publication in peer refereed scientific journal. Skeletal tissue analysis was performed using the validated “Direct DICOM slices landmarking method” while soft tissue analysis was performed using Dense correspondence analysis. The analysis of soft tissue was novel and produced a comprehensive description of facial changes in response to orthognathic surgery. The results were accepted for publication in a refereed scientific Journal. The main soft tissue changes associated with Le Fort I were advancement at the midface region combined with widening of the paranasal, upper lip and nostrils. Minor changes were noticed at the tip of the nose and oral commissures. The main soft tissue changes associated with mandibular advancement surgery were advancement and downward displacement of the chin and lower lip regions, limited widening of the lower lip and slight reversion of the lower lip vermilion combined with minimal backward displacement of the upper lip were recorded. Minimal changes were observed on the oral commissures. The main soft tissue changes associated with bimaxillary advancement surgery were generalized advancement of the middle and lower thirds of the face combined with widening of the paranasal, upper lip and nostrils regions. In Le Fort I cases, the correlation between the changes of the facial soft tissue and the skeletal surgical movements was assessed using PCA. A statistical method known as ’Leave one out cross validation’ was applied on the 30 cases which had Le Fort I osteotomy surgical procedure to effectively utilize the data for the prediction algorithm. The prediction accuracy of soft tissue changes showed a mean error ranging between (0.0006mm±0.582) at the nose region to (-0.0316mm±2.1996) at the various facial regions.

Fonctions cognitives de patients atteints d'un gliome de haut grade avant tout traitement

En plus d’être associé à une espérance de vie précaire, les gliomes de haut grade (GHG) s’accompagnent de déficits cognitifs ayant le potentiel d’avoir un impact majeur sur la qualité de vie. Il demeure une compréhension limitée de l’étendue et de la nature des déficits cognitifs des patients en début de parcours de soins, de l’effet de la tumeur elle-même sur les fonctions cognitives tout comme de son lien avec la qualité de vie. L’objectif général de la présente étude était d’effectuer une évaluation cognitive de patients atteints de GHG avant tout traitement afin de décrire leur profil cognitif. Plus précisément, on visait à décrire l’étendue et la nature des déficits cognitifs des patients et explorer la relation entre les fonctions cognitives des patients et les caractéristiques tumorales (volume tumoral et de l’atteinte parenchymateuse) et le niveau de qualité de vie. Une seconde partie de l’étude visait à explorer l’utilité du Montreal Cognitive Assessment (MOCA), un test de dépistage, pour détecter des déficits cognitifs chez des patients atteints d’un GHG. Une étude descriptive transversale exploratoire, comportant un échantillon de 14 patients atteints de GHG nouvellement diagnostiqués et recrutés au Centre Hospitalier Universitaire de Sherbrooke, a été conduite. Les évaluations cognitives ont été effectuées à l’aide d’une batterie de six tests neuropsychologiques et du MOCA. Les volumes tumoraux provenant des imageries par résonance magnétique ont été obtenus grâce à une méthode volumétrique rigoureuse alors que la qualité de vie a été évaluée à l’aide du Sherbrooke Neuro-oncology Assessment Scale. Les résultats ont démontré que des déficits cognitifs sont bien présents en début de parcours de soins chez ces patients. En ce qui à trait aux caractéristiques tumorales, notre étude n’a pu démontrer de corrélation entre les déficits cognitifs et le volume tumoral, soulevant la possibilité d’une absence de lien entre ces deux variables. L’atteinte parenchymateuse créée par la tumeur corrèle avec un test d’évaluation de la vitesse de traitement de l’information (⍴ = -0,784, p = 0,01). Il semblerait par ailleurs que les fonctions cognitives ne soit pas corrélées avec le niveau de qualité de vie. Finalement, le MOCA semble être un outil prometteur pour l’évaluation cognitive des patients présentant des GHG, alors qu’il semble présenter une valeur prédictive positive satisfaisante malgré une sensibilité plus modeste.

Numerical simulation of strain-adaptive bone remodelling in the ankle joint

Background: The use of artificial endoprostheses has become a routine procedure for knee and hip joints while ankle arthritis has traditionally been treated by means of arthrodesis. Due to its advantages, the implantation of endoprostheses is constantly increasing. While finite element analyses (FEA) of strain-adaptive bone remodelling have been carried out for the hip joint in previous studies, to our knowledge there are no investigations that have considered remodelling processes of the ankle joint. In order to evaluate and optimise new generation implants of the ankle joint, as well as to gain additional knowledge regarding the biomechanics, strain-adaptive bone remodelling has been calculated separately for the tibia and the talus after providing them with an implant. Methods: FE models of the bone-implant assembly for both the tibia and the talus have been developed. Bone characteristics such as the density distribution have been applied corresponding to CT scans. A force of 5,200 N, which corresponds to the compression force during normal walking of a person with a weight of 100 kg according to Stauffer et al., has been used in the simulation. The bone adaptation law, previously developed by our research team, has been used for the calculation of the remodelling processes. Results: A total bone mass loss of 2% in the tibia and 13% in the talus was calculated. The greater decline of density in the talus is due to its smaller size compared to the relatively large implant dimensions causing remodelling processes in the whole bone tissue. In the tibia, bone remodelling processes are only calculated in areas adjacent to the implant. Thus, a smaller bone mass loss than in the talus can be expected. There is a high agreement between the simulation results in the distal tibia and the literature regarding. Conclusions: In this study, strain-adaptive bone remodelling processes are simulated using the FE method. The results contribute to a better understanding of the biomechanical behaviour of the ankle joint and hence are useful for the optimisation of the implant geometry in the future.

Numerical investigations on the strain-adaptive bone remodelling in the periprosthetic femur: Influence of the boundary conditions

Background: There are several numerical investigations on bone remodelling after total hip arthroplasty (THA) on the basis of the finite element analysis (FEA). For such computations certain boundary conditions have to be defined. The authors chose a maximum of three static load situations, usually taken from the gait cycle because this is the most frequent dynamic activity of a patient after THA. Materials and methods: The numerical study presented here investigates whether it is useful to consider only one static load situation of the gait cycle in the FE calculation of the bone remodelling. For this purpose, 5 different loading cases were examined in order to determine their influence on the change in the physiological load distribution within the femur and on the resulting strain-adaptive bone remodelling. First, four different static loading cases at 25%, 45%, 65% and 85% of the gait cycle, respectively, and then the whole gait cycle in a loading regime were examined in order to regard all the different loadings of the cycle in the simulation. Results: The computed evolution of the apparent bone density (ABD) and the calculated mass losses in the periprosthetic femur show that the simulation results are highly dependent on the chosen boundary conditions. Conclusion: These numerical investigations prove that a static load situation is insufficient for representing the whole gait cycle. This causes severe deviations in the FE calculation of the bone remodelling. However, accompanying clinical examinations are necessary to calibrate the bone adaptation law and thus to validate the FE calculations.

Expertise sur 3 masses d’eau de la Réunion (étangs de Saint-Paul et du Gol) et de Martinique (étang des Salines) : typologie et surveillance DCE

Trois masses d’eau situées sur le littoral de l’île de la Réunion et de la Martinique présentent des fonctionnements et des caractéristiques atypiques, ce qui pose actuellement des difficultés dans le cadre de l’application de la DCE. Les deux masses d’eau réunionnaises, l’étang du Gol et l’étang de Saint-Paul, sont actuellement identifiées en tant que plans d’eau au titre de la DCE. La masse d’eau martiniquaise, l’étang des Salines, est quant à elle identifiée en tant que masse d’eau de transition. L’objectif de cette étude est d’apporter une expertise, sur la base des données disponibles et des échanges avec les experts locaux et nationaux, concernant : · la typologie des masses d’eau, · les paramètres chimiques, physico-chimiques et biologiques pertinents à suivre dans le cadre de la surveillance DCE, · des pistes de travail pour consolider des grilles de diagnostic sur les masses d’eau. Cette expertise s’appuie également sur les retours d’expériences et les études réalisées dans le cadre de la mise en oeuvre de la DCE sur les lagunes des bassins Rhône Méditerranée et Corse, dont la morphologie et le fonctionnement se rapprochent des trois masses d’eau étudiées. L’analyse des données et études fournies sur les étangs réunionnais du Gol et de Saint-Paul conduit à poser la question de la pertinence de leur maintien dans le référentiel des masses d’eau au titre de la DCE. Si le choix est cependant fait de conserver ces étangs en tant que masses d’eau DCE, leurs caractéristiques correspondraient à la typologie des eaux de transition et à la gamme de salinité oligohaline. Des recommandations sont formulées en termes d’études complémentaires visant à préciser le fonctionnement hydrologique de ces étangs et de priorisation des suivis de leur qualité physico-chimique et biologique, pour aboutir à une surveillance DCE pérenne. Les recommandations formulées à partir des données fournies sur l’étang martiniquais des Salines concernent l’évaluation des pressions anthropiques pesant sur cette masse d’eau, la priorisation des suivis de sa qualité chimique, physico-chimique et biologique dans le cadre de la surveillance DCE. Des pistes sont également données pour l’élaboration et la consolidation de grilles de diagnostic adaptées à cet étang.