Fabrication and Investigation of High Efficiency Evanescently Coupled Uni-Traveling Carrier Photodiodes

In this paper, an evanescently coupled uni-traveling carrier photodiodes (EC-UTC-PDs) have been fabricated and investigated, which can benefit from the incorporation of a multimode diluted waveguide of appropriate length with experiment-simulation comparison. A high responsibvity of 0.68 A/W at 1.55-mu m without an anti-reflection coating, -1 dB compression current of more than 19 mA, and a large -1 dB vertical alignment tolerance of 2.2 mu m were achieved.

A V-shaped module technique for promoting generation photocurrent density of silicon solar cells

A V-shaped solar cell module consists of two tilted mono-crystalline cells [J. Li, China Patent No. 200410007708.6 (March, 2004)]. The angle included between the two tilted cells is 90 degrees. The two cells were fabricated by using polished silicon wafers. The scheme of both-side polished wafers has been proposed to reduce optical loss. Compared to solar cells in a planar way, the V-shaped structure enhances external quantum efficiency and leads to an increase of 15% in generation photocurrent density. The following three kinds of trapped photons are suggested to contribute to the increase: (1) infrared photons converted from visible photons due to a transformation mechanism, (2) photons reflected from top contact metal, and (3) a residual reflection which can not be eliminated by an antireflection coating.

Design and Characterization of Evanescently Coupled Uni-Traveling Carrier Photodiodes with a Multimode Diluted Waveguide Structure

A new evanescently coupled uni-traveling carrier photodiode (EC-UTC-PD) is designed, fabricated and characterized, which incorporates a multimode diluted waveguide structure and UTC active waveguide structure together. A high responsivity of 0.68A/W at 1.55-mu m without an anti-reflection coating, a linear photocurrent responsivity of more than 21 mA, and a large-1 dB vertical alignment tolerance of 2.5 mu m are achieved.

Electropolymerized poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film on ITO glass and its application in photovoltaic device

Poly(3,4-ethylenedioxythiopliene):poly(styrene sulfonate) (PEDOT:PSS) films have been electrochemically polymerized in situ on ITO glass substrate in boron trifluoride diethyl etherate electrolyte (BFEE). Cyclic voltammograms show good redox activity and stability of the PEDOT films. These films had been directly used to fabricate organic-inorganic hybrid solar cells with the structure of ITO/PEDOT/ZnO:MDMC-PPV/Al. The solar cells made of electrochemically polymerized films exhibit higher energy conversion efficiencies compared with that prepared by the spin-coating method, and the highest value is 0.33%. This in-situ electropolymerized method effectively simplifies fabricating procedures and may blaze a facile and economical route for producing high-efficiency solar cells.

Broadband external cavity tunable quantum dot lasers with low injection current density

Broadband grating-coupled external cavity laser, based on InAs/GaAs quantum dots, is achieved. The device has a wavelength tuning range from 1141.6 nm to 1251.7 nm under a low continuous-wave injection current density (458 A/cm(2)). The tunable bandwidth covers consecutively the light emissions from both the ground state and the 1st excited state of quantum dots. The effects of cavity length and antireflection facet coating on device performance are studied. It is shown that antireflection facet coating expands the tuning bandwidth up to similar to 150 nm, accompanied by an evident increase in threshold current density, which is attributed to the reduced interaction between the light field and the quantum dots in the active region of the device.

The fabrication of TiO2-supported zeolite with core/shell heterostructure for ethanol dehydration to ethylene

The TiO2-supported zeolite with core/shell heterostructure was fabricated by coating aluminosilicate zeolite (ASZ) on the TiO2 inoculating seed via in situ hydrothermal synthesis. The catalysts were characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), nitrogen physisorption (BET), and Fourier transform infrared spectroscopy (FT-IR). The surface acidity of the catalysts was measured by pyridine-TPD method. The catalytic performance of the catalysts for ethanol dehydration to ethylene was also investigated. The results show that the TiO2-supported zeolite composite catalyst with core/shell heterostructure exhibits prominent conversion efficiency for ethanol dehydration to ethylene.

Catalytic Dehydration of Ethanol to Ethylene on TiO2/4A Zeolite Composite Catalysts

TiO2/4A zeolite composite catalysts were prepared by coating TiO2 on 4A zeolite via liquid phase deposition. The TiO 2/4A zeolite composite catalysts wtih higher surface weak acidity and lower mediate strong acidity exhibit much better catalytic performance on ethanol dehydration to ethylene compared with 4A zeolite. It is suggested that the TiO2 promoter could improve the effective Lewis acidity of composite catalyst which consequently enhanced the catalytic performance.

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO2 sol-gels with various Ag/TiO2 molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO2 thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO2 nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO2 sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO2 sol-gel, four types of the TiO2 thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO,), TA (bottom layer was pure TiO,, surface layer was Ag modified), TT (pure TiO, thin film) and AA (TiO, thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I-ph). LSV confirmed the existence of Ago state in the TiO, thin film. SEM and XRD experiments indicated that the sizes of the TiO,, nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO2 thin film.

Giant Goos-Hanchen displacement enhanced by dielectric film in frustrated total internal reflection configuration

It is predicted that the Goos-Hanchen displacement in the usual frustrated total internal reflection configuration can be resonantly enhanced greatly by coating a dielectric thin film onto the surface of the first prism when the angle of incidence is larger than the critical angle for total reflection at the prism-vacuum interface and is smaller than but close to the critical angle for total reflection at the prism-film interface. Theoretical analysis shows that the displacement of transmitted beam is about half the displacement of reflected beam in the thick limit of the vacuum gap between the two prisms. This is to be compared with the relation in the usual symmetric double-prism configuration that the displacement of transmitted beam is equal to the displacement of reflected beam. Numerical simulations for a Gaussian incident beam of waist width of 100 wavelengths reveal that when the dielectric thin film is of the order of wavelength in thickness, both the reflected and transmitted beams maintain well the shape of the incident beam in the thick limit of the vacuum gap. So largely enhanced displacements would lead to applications in optical devices and integrated optics. (c) 2007 American Institute of Physics.

Sol-gel matrix modified microstructured optical fibre towards a fluoride sensitive optical probe

In this article, we report an optical fluoride probe based on microstructured polymer optical fibers (MPOFs) which is modified with morin-Al complex doped silica gel film. This probe is fabricated by sol-gel fluxion coating process. Sol solution doped with morin-Al is directly inhaled into array holes of MPOF and then forms morin-Al-gel matrix film in them. The sensing probe shows different fluorescence intensity to different fluoride ion concentrations in the aqueous solution. The range of response is 550 mmol/L, under the condition of pH 4.6. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.

稀土透明发光薄膜的合成及其应用

利用溶胶-凝胶法制备了SiO_2、TiO_2等单组份凝胶玻璃及二者混合的双组份二元凝胶玻璃。对其中溶胶的形成、溶胶向凝胶的转化过程及最终凝胶玻璃的形成进行了大量系统的研究。稀土(Tb~(3+)、Eu~(3+))配合物分别以预掺杂法、原位(in-situ)掺杂法及原位两步水解法等方法掺入溶胶中，用旋转涂覆法(spin-coating method)制成发光薄膜。利用荧光光谱、红外光谱、X射线衍射分析等现代谱学方法对薄膜的性能进行了分析。由于稀土Eu~(3+)离子的~5D_0→~7F_2跃迁是对环境变化比较敏感的跃迁超灵敏跃迁，相应于这些跃迁的谱线强度随着环境的不同可改变2-4倍，故将Eu~(3+)离子作为荧光探针引入TiO_2凝胶玻璃中来研究TiO_2凝胶形成中的水解、缩聚过程。差热一热重分析表明在400 ℃左右TiO_2凝胶发生了由无定型向锐钛矿型的晶型的转变，在不同温度下处理的TiO_2凝胶的XRD曲线也可得到同样的结论。当温度达到800 ℃时观察到了金红石相的微小的衍射峰。从Eu~(3+)离子的荧光光谱可以看出对应于610 nm的~5D_0→~7F_2的跃迁强度(I_2)和590 nm的~5D_0→~7F_1的跃迁强度(I_1)随着热处理温度的升高而逐渐增强，说明随着处理温度升高，凝胶中水分子不断挥发，热处理过程中的羟基含量由于缩聚反应的不断进行而逐渐减少。~5D_0→~7F_1的跃迁属于磁偶极跃迁，发射强度I_1变化与环境变化无关。定义两个发射强度的比值R(R=I_2/I_1)，由R值的变化可以看出，TiO_2湿凝胶时Eu~(3+)离子与水成水合离子，干凝胶中水合离子逐渐被(Ti-O)_nEu键所取代，Eu~(3+)离子逐渐进入凝胶网状结构中。同时掺入Al~(3+)离子的凝胶中Eu~(3+)的发光强度要大于不含Al~(3+)离子的凝胶中Eu~(3+)的发光强 度，因为Eu~(3+)离子的聚集对荧光有猝灭作用，掺入Al~(3+)离子之后由于其对Eu~(3+)离子的分散作用使得跃迁强度大大增强。采用预掺杂法；原位掺杂法；原位两步水解法制备了稀土Eu~(3+)、Tb~(3+)的羧酸类配合物，2-2‘联吡啶，1，10-邻菲咯啉，β-二酮类等有机配合物掺杂的溶胶-凝胶发光薄膜。双掺Tb~(3+)和苯甲酸的凝胶荧光薄膜的红外分析结果可以看出，制得的凝胶薄膜的红外光谱图与SiO_2凝胶粉末的红外光谱图几乎一致，Tb~(3+)及有机配体掺入凝胶后配合物没有明显的特征振动吸收峰。说明配合物进入凝胶网状结构中，其振动被缩聚反应形成的微小孔隙结构所限制，没能观察到明显的吸收峰。由几种双掺稀土羧酸配合物的SiO_2凝胶薄膜的激发光谱可以看出，当以稀土Eu~(3+)离子或Tb~(3+)离子的特征发射波长监控时，得到的激发谱均为260 nm-350 nm范围内的宽带代替了稀土离子的特征窄带激发光谱，可以判断在凝胶薄膜中已经形成了配合物。而且双掺凝胶薄膜发射峰值比单掺稀土离子的凝胶薄膜发光强度高几个数量级。同时将薄膜在一定温度下进行热处理发现，对于双掺稀土和羧酸配体的凝胶薄膜，50 ℃时发射光谱无明显的发射峰，而随着热处理温度的逐渐升高出现发射峰并且强度逐渐增强，热处理超过100 ℃时发射峰的强度又有所降低。说明温度的升高使凝胶环境向着有利于稀土配合物形成的方向转变，因为两步水解过程中加入的六次甲基四胺会随着温度升高而逐渐分解出OH~-而仗凝胶环境pH值升高；另一方面，由于分子水和HCl的不断挥发也能提高凝胶环境的pH值，从而使配合物的形成反应更加完全。超过120 ℃后，接近配体的熔点(苯甲酸熔点129 ℃)，由于薄膜相当薄使配体的逐渐分解，荧光逐渐减弱；经175 ℃处理后，荧光几乎消失。除了羧酸配合物外还制备了稀土Tb~(3+) (Eu~(3+))与2-2‘联吡啶(邻菲咯啉)、TTA等二元配合物掺杂的溶胶-凝胶发光薄膜。凝胶薄膜的发光强度与相应的纯配合物薄膜相比由于凝胶的独特网状结构而有了较大的提高，通过荧光光谱和荧光寿命的比较均可以得出这样的结论。对凝胶薄膜和纯配合物/PVB薄膜的热稳定性比较可以看出，溶胶-凝胶发光薄膜的荧光强度随温度升高而降低，但与配合物的PVB薄膜的相比，仍显示了一定的热稳定性，在温度超过配合物的分解温度后仍显示出一定的发光强度，而纯配合物/PVB薄膜中配合物的荧光此时几乎完全消失。除了SiO_2凝胶之外，还制备和研究了TiO_2凝胶以及TiO_2-SiO_2复合凝胶作为基质的发光薄膜，发现在TiO_2凝胶中配合物未能象在SiO_2中那样显示出良好的发光性能，可能是因为作为过渡金属钛由于有d轨道与掺入其中的配体作用参与成键，影响了配体与稀土离子之间的能量转移。本论文中还将在光学领域中有重要作用的染料，例如荧光素(FL)引人TiO_2凝胶中，研究了FL在凝胶中的发光性质，对比了FL掺入TiO_2、TiO_2-SiO_2凝胶前后的吸收光谱、荧光光谱的变化。结果表明吸收峰有了较为明显的位移；荧光发射光谱吸收峰位置也有了较大的红移，这可能是由于凝胶的网状结构及孔道内的Ti-OH键等对染料影响的结果。

稀土有机－无机杂化材料的制备及发光性能

本论文旨在开发能使无机材料和有机材料的功能互补、协同优化的无机/有机复合发光材料的制备方法，并研究其发光性质，以发展一类新型的高性能发光材料。基于无机组份与有机组份的物理和化学性质的差异，采用能保持其性质均不改变的低温软化学合成法-溶胶-凝胶技术。无机组份选择具有优良光、热稳定性的SiO_2，有机组份选择具有和无机SiO_2相似折射率和优良力学性能的有机硅烷TMSPM和甲基丙烯酸羟乙酯(HEMA)。采用溶胶-凝胶法制备了两种杂化基质材料SiO_2/P (TMSPM)和SiO_2/P(HEMA)，所得的杂化材料具有良好的光学透明性。由于原位聚合物与无机SiO_2基质同时形成，不仅使杂化基质具有一定的韧性，而且可有效降低无机SiO_2凝胶基质的热聚集和光损耗，是制备复合发光材料的优良基质材料。稀土 (Tb~(3+), Eu~(3+))配合物分别以预掺杂法，原位(in-situ)掺杂法掺入溶胶中，制备了块状杂化材料和用旋转涂覆法(spin-coating method)制成了杂化发光薄膜。利用荧光光谱、红外光谱等现代谱学方法对材料的性能进行了分析。采用预掺杂法制备了稀土Eu~(3+)的1，10-菲罗啉、β-二酮类有机配合物掺杂的杂化发光薄膜。当以稀土Eu~(3+)离子的特征发射波长监控时，得到的激发谱均匀260-450 cm范围内的宽带代替了稀土离子的特征窄带激发光谱，可以判断在凝胶薄膜中已经形成了配合物，而且杂化凝胶薄膜的发射峰值比纯硅胶薄膜的发光强度高数倍，杂化薄膜的荧光寿命大于纯硅胶薄膜，表明与纯硅胶相比，杂化基质更能使稀土配合物分子与外界隔绝，避免了稀土配合物分子与周围环境的相互作用，从而降低了非辐射去活化过程，是一种更好的保护性基质。采用原位掺杂法制备了掺杂稀土Tb~(3+)的羧酸类配合物的杂化块状发光材料。除部分羧酸自由基外，羧酸配体已经通过原位合成法成功地掺入到了杂化基质中。羧酸配体与稀土离子所形成的结构、给电子效应、共轭效应及空间位阻效应特性对于其杂化材料的发光强度、荧光寿命等均会产生影响。

颗粒表面包覆的研究

纳米材料以其特有的优异性能成为下一代信息技术、能源技术和生物医学等技术的重要基础.随着对纳米材料研究的不断深入,对纳米材料的认识不断加深和丰富,对其的研究也逐渐集中在具有功能性质的纳米结构材料方面.对于应用纳米技术制备具有某种性质的材料来说,有必要建立可靠和可以预期结果的合成纳米结构材料的手段.制备具有纳米结构的表面包覆的颗粒材料的技术则是一种行之有效的手段.由于表面包覆的颗粒材料在材料改性和新功能性质的附加方面均有特点,具有实用及潜在应用价值,已广泛地应用在现代材料合成中.结合当今科学研究的前沿领域内,通过大量文献调研,选择具有纳米结构的表面包覆的颗粒材料作为研究的重点.在该论文中我们制备了一些表面包覆的颗粒材料,并对样品进行了表征,取得了一些创新性结果.

稀土配合物掺杂的中孔杂化发光材料的制备及其表征

稀土配合物由于具有优良的窄带发光性能和较长的荧光寿命，因而在光电学领域比如激光材料或者荧光标记上引起了广泛的兴趣和应用。吸附在固体表面的稀土配合物的发光性质得到了广泛的研究。MCM-48中孔材料是M41S家族中的一种，具有直径20-30A三维结构的中孔孔道，比MCM-41的一维结构孔道更有优势，比如它可以最大可能的避免客体分子的堆积现象。因此本论文中我们研究了将稀土（Eu3+）β-二酮（DBM＝dibenzoylmethane）配合物掺杂到纯硅MCM-48以及三种有机基团嫁接的有机－无机杂化MCM-48的孔道中去，得到了各种不同的杂化中孔发光材料。首先烧结后的MCM-48被装载稀土Eu（OBM）3'2H2O配合物之后。XRD结果说明稀土配合物被组装到了MCM-48中，其有序结构因为稀土配合物的进入而受到一定的影响，但是样品仍保持了MCM-48的立方相结构。分别通过吸收光谱和热失重的方法计算了掺杂后的发光MCM-48样品进行洗涤后留在MCM一48中配合物的量。固体漫反射光谱在紫外区有一个OBM配体的Sn基态能级（π）到S1激发态能级份＊）的电子跃迁形成的吸收宽带。可见区还观察到E护”离子的4f-4畴征吸收线。与稀土配合物中的OBM配体相比，掺杂MCM-48样品的Sn-S1吸收带均发生蓝移，反映了S1能级向高能方向移动。然后采用了室温两步合成法合成MCM-48，模板剂的去除采用了溶剂萃取法。最佳掺杂浓度为6.98×10-3 mol/l；同时最佳掺杂时间为24小时。在同样的掺杂条件下，稀土配合物在基质中的掺杂量MCM-48＞MCM-41＞＞SiO2。萃取之后的MCM-48在外形上近乎于球形，粒子的直径在0.7-1.2μm之间。粒子显现出多孔的海绵状表面形态，并且具有晶体结构外形，呈菱形十二面体被削去顶端立方体的结构。而且在粒子的表面观察到了类似螺旋结构的孔道，我们认为这是MCM一48所特有的双螺旋型三维孔道结构，这是到目前为止首次报道利用扫描电镜观察到中孔分子筛的孔道结构。荧光光谱结果观察到了激发峰的最大值由于纳米粒子效应出现的蓝移现象。不同基质中的发射系数QZ和04比较可知配合物在三种基质SiO2、MCM-41和MCM-48中环境的极性相差不大。掺杂到中孔MCM-48材料中的稀土配合物的热稳定性比在MCM-41中强，这是由于MCM-48的三维孔道对配合物的保护作用。室温条件下合成的MCM-48分子筛利用后合成嫁接的方法[post-synthesis grajng（PSG）]进行表面修饰，修饰剂选用了带有功能性乙烯基的VTES，链长最短的MTES以及带有氨基的长链NTSED。稀土Eu（DBM）3'2H2O配合物被组装到杂化中孔分子筛材料中。红外光谱与2951核磁共振光谱表明MCM-48的表面被成功的接枝上了有机M下任S，盯任s，N丁s任D基团。与MCM-48相比，MCM-48-R的表面积、孔体积和孔径的减少有以下NTSED＞VTES＞MTES的顺序。这也许是修饰的有机基团不同的链的长度不同的原因。稀土配合物在这三种有机一无机杂化基质环境的极性比纯硅MCM-48要增大。同时配合物在三种基质的中的QZ的值及发光效率的顺序为：MCM-48-MTES＜MCM-48-VTES＜MCM-48-NTSED，说明MCM-48经过三种有机硅氧烷修饰之后孔道极性也遵循同样的顺序，可以认为这是由于三种有机基团的链长的不同造成的，链长越长则修饰之后孔道极性增大的就越多。最后通过溶胶一凝胶过程利用提拉法（Dip-coating method）制备了具有中孔结构的SiO2-CTAB-Tb（acac）3透明发光薄膜（Mesostructed Iuminescence thin film，略为MLTF），稀土配合物利用原位合成（In-situ）的办法掺入到透明薄膜中。对薄膜进行热处理过程表明薄膜中的稀土配合物在50℃的时候开始形成。XRO结果表明稀土离子及有机配体的掺入对薄膜中孔相的结构没有太大的影响，荧光薄膜仍保持层状结构。红外光谱结果说明制备的中孔薄膜是由CTAB和硅氧烷聚合物组成的复合薄膜。荧光薄膜的发射光谱给出了Th3+离子的特征发射峰，荧光薄膜中有机配体与丁b离子之间发生了能量传递现象。因为在热处理过程中有机配体逐渐代替了开始与Tb离子配位的OH基团，使得二者间的能量传递更加有效，从而导致了荧光的增强。