Switchable lanthanide fluorescence probes in homogenous molecular diagnostics

The number of molecular diagnostic assays has increased tremendously in recent years.Nucleic acid diagnostic assays have been developed, especially for the detection of human pathogenic microbes and genetic markers predisposing to certain diseases. Closed-tube methods are preferred because they are usually faster and easier to perform than heterogenous methods and in addition, target nucleic acids are commonly amplified leading to risk of contamination of the following reactions by the amplification product if the reactions are opened. The present study introduces a new closed-tube switchable complementation probes based PCR assay concept where two non-fluorescent probes form a fluorescent lanthanide chelate complex in the presence of the target DNA. In this dual-probe PCR assay method one oligonucleotide probe carries a non-fluorescent lanthanide chelate and another probe a light absorbing antenna ligand. The fluorescent lanthanide chelate complex is formed only when the non-fluorescent probes are hybridized to adjacent positions into the target DNA bringing the reporter moieties in close proximity. The complex is formed by self-assembled lanthanide chelate complementation where the antenna ligand is coordinated to the lanthanide ion captured in the chelate. The complementation probes based assays with time-resolved fluorescence measurement showed low background signal level and hence, relatively high nucleic acid detection sensitivity (low picomolar target concentration). Different lanthanide chelate structures were explored and a new cyclic seven dentate lanthanide chelate was found suitable for complementation probe method. It was also found to resist relatively high PCR reaction temperatures, which was essential for the PCR assay applications. A seven-dentate chelate with two unoccupied coordination sites must be used instead of a more stable eight- or nine-dentate chelate because the antenna ligand needs to be coordinated to the free coordination sites of the lanthanide ion. The previously used linear seven-dentate lanthanide chelate was found to be unstable in PCR conditions and hence, the new cyclic chelate was needed. The complementation probe PCR assay method showed high signal-to-background ratio up to 300 due to a low background fluorescence level and the results (threshold cycles) in real-time PCR were reached approximately 6 amplification cycles earlier compared to the commonly used FRET-based closed-tube PCR method. The suitability of the complementation probe method for different nucleic acid assay applications was studied. 1) A duplex complementation probe C. trachomatis PCR assay with a simple 10-minute urine sample preparation was developed to study suitability of the method for clinical diagnostics. The performance of the C. trachomatis assay was equal to the commercial C. trachomatis nucleic acid amplification assay containing more complex sample preparation based on DNA extraction. 2) A PCR assay for the detection of HLA-DQA1*05 allele, that is used to predict the risk of type 1 diabetes, was developed to study the performance of the method in genotyping. A simple blood sample preparation was used where the nucleic acids were released from dried blood sample punches using high temperature and alkaline reaction conditions. The complementation probe HLA-DQA1*05 PCR assay showed good genotyping performance correlating 100% with the routinely used heterogenous reference assay. 3) To study the suitability of the complementation probe method for direct measurement of the target organism, e.g., in the culture media, the complementation probes were applied to amplificationfree closed-tube bacteriophage quantification by measuring M13 bacteriophage ssDNA. A low picomolar bacteriophage concentration was detected in a rapid 20- minute assay. The assay provides a quick and reliable alternative to the commonly used and relatively unreliable UV-photometry and time-consuming culture based bacteriophage detection methods and indicates that the method could also be used for direct measurement of other micro-organisms. The complementation probe PCR method has a low background signal level leading to a high signal-to-background ratio and relatively sensitive nucleic acid detection. The method is compatible with simple sample preparation and it was shown to tolerate residues of urine, blood, bacteria and bacterial culture media. The common trend in nucleic acid diagnostics is to create easy-to-use assays suitable for rapid near patient analysis. The complementation probe PCR assays with a brief sample preparation should be relatively easy to automate and hence, would allow the development of highperformance nucleic acid amplification assays with a short overall assay time.

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

The Combined treatment of UV Light and Titanium Dioxide (TiO2) in Grease Filtration Technique

The aim of this thesis was to identify the best grease removal technique with the application of low power of UV light to TiO2 coated grease filters. The treatment with various power series of ozone generating and ozone free lamps to normal grease filters and TiO2 coated grease filters were examined and the obtained results are compared to each other in this paper. The effect of ozone reaction was observed and compared with the effect of TiO2. The experiments were solely based on the photo oxidation and photo catalytic oxidation reactions. TiO2 is a green catalyst used in the photocatalytic reaction. Sunflower oil was used for grease production and tetracholoroethylene as a solvent. Grease samples were collected from the ventilation duct connected to the cooking hood system. Sample extraction was done in ultrasonic bath with the principle of sonication. The sample analysis was done by FTIR machine. The result determining the concentration of grease was the quantification of saturated C-H bonds in the chosen peak group of the spectrum. A very low power of UVC light functions perfectly with the Titanium dioxide. The experimental results have shown the combined treatment of titanium dioxide and UV light is an effective method in grease removal process. The photocatalytic reaction with titanium dioxide is better than photo oxidation reaction with ozone treatment. Photocatalytic reaction is environmentally friendly, energy efficient and economical.

Assessment of Young Learners’ English Proficiency in Bilingual Content Instruction CLIL

This applied linguistic study in the field of second language acquisition investigated the assessment practices of class teachers as well as the challenges and visions of language assessment in bilingual content instruction (CLIL) at primary level in Finnish basic education. Furthermore, pupils’ and their parents’ perceptions of language assessment and LangPerform computer simulations as an alternative, modern assessment method in CLIL contexts were examined. The study was conducted for descriptive and developmental purposes in three phases: 1) a CLIL assessment survey; 2) simulation 1; and 3) simulation 2. All phases had a varying number of participants. The population of this mixed methods study were CLIL class teachers, their pupils and the pupils’ parents. The sampling was multi-staged and based on probability and random sampling. The data were triangulated. Altogether 42 CLIL class teachers nationwide, 109 pupils from the 3rd, 4th and 5th grade as well as 99 parents from two research schools in South-Western Finland participated in the CLIL assessment survey followed by an audio-recorded theme interview of volunteers (10 teachers, 20 pupils and 7 parents). The simulation experimentations 1 and 2 produced 146 pupil and 39 parental questionnaires as well as video interviews of volunteered pupils. The data were analysed both quantitatively using percentages and numerical frequencies and qualitatively employing thematic content analysis. Based on the data, language assessment in primary CLIL is not an established practice. It largely appears to be infrequent, incidental, implicit and based on impressions rather than evidence or the curriculum. The most used assessment methods were teacher observation, bilingual tests and dialogic interaction, and the least used were portfolios, simulations and peer assessment. Although language assessment was generally perceived as important by teachers, a fifth of them did not gather assessment information systematically, and 38% scarcely gave linguistic feedback to pupils. Both pupils and parents wished to receive more information on CLIL language issues; 91% of pupils claimed to receive feedback rarely or occasionally, and 63% of them wished to get more information on their linguistic coping in CLIL subjects. Of the parents, 76% wished to receive more information on the English proficiency of their children and their linguistic development. This may be a response to indirect feedback practices identified in this study. There are several challenges related to assessment; the most notable is the lack of a CLIL curriculum, language objectives and common ground principles of assessment. Three diverse approaches to language in CLIL that appear to affect teachers’ views on language assessment were identified: instrumental (language as a tool), dual (language as a tool and object of learning) and eclectic (miscellaneous views, e.g. affective factors prioritised). LangPerform computer simulations seem to be perceived as an appropriate alternative assessment method in CLIL. It is strongly recommended that the fundamentals for assessment (curricula and language objectives) and a mutual assessment scheme should be determined and stakeholders’ knowledge base of CLIL strengthened. The principles of adequate assessment in primary CLIL are identified as well as several appropriate assessment methods suggested.

European luxury brands made in China: the effect of low-cost country manufacturing on brand image and purchase decisions

European luxury brands have an image of manufacturing their products in the same country where the brands originate. However, in the past years many luxury brands have shifted their manufacturing to countries outside Europe. China is now a common manufacturing country for European luxury brands despite the country’s poor image as a manufacturer. Chinese manufacturing is often associated with bad quality, bad labour conditions, mass production, and counterfeits. The image of China does not quite match the image luxury brands enjoy including characteristics such as high end quality, craftsmanship, details, design, or premium price. A negatively perceived country-of-manufacture may have an effect on a brand’s image and consumers’ purchase decisions. This thesis is focused on European luxury brands manufacturing in China, and how this effects the brand image and purchase decisions among luxury consumers. The empirical part of this thesis is based on focus group research, which is a popular method in the field of qualitative research. The main focus group is female luxury consumers in Finland. This main group has been divided into three categories: 1) the university students, 2) the young career women, 3) the experienced luxury consumers. This categorization has been done based on their different stages in luxury consumption. All in all, the empirical research consisted of 11 interviews and 29 participants. The main contribution of this thesis was that there is a difference between the opinions of the younger groups (university students and young career women) and the experienced luxury consumers when discussing the effect of country-of-manufacture on brand image and purchase decisions of luxury brands. The younger participants thought that manufacturing luxury products in China might affect the brand image, but their purchase decisions would not be that much affected by the country-of-origin. The experienced luxury consumers had quite a different view on the country-of-origin of luxury brands – they found it an important decisive factor prior making purchases. The majority of experienced luxury consumers would not buy luxury products made in China, and they would always check where these products are made in.

The usage of experimental research in business-to-business marketing context in academic marketing journals

The aim of this master’s thesis is to introduce what is experimental research and how the researcher is able to use this researching method in business-to-business context. This work has been done with analyzing articles of four academic marketing journals from years 1992-2012. In the literature part there is introduction of the nature of the experimental research, its terminology and design. There is also discussion about limitations of experimental research and comparison of experimental research to quasi-experimental design. In the results part there is a review how experimental research has been used in the business-to-business context in the past two decades. In the analysis there is introduction of themes, samplings, different kinds of variables and main findings. The work offers a good understanding to nature of experimental research and useful data for organizing a real experimental study.

Project Controlling and Management in IT Consulting Enterprise

Liiketoiminnan organisoiminen projekteiksi on erittäin yleistä nykyisin. Suuri osa projekteista erityisesti IT-alalla epäonnistuu kuitenkin saavuttamaan tavoitteensa. Projektin menestys on tyypillisesti mitattu budjetin, aikataulun, laadun ja sidosryhmien tyytyväisyyden perusteella. Tämän Pro Gradu -tutkielman tarkoituksena on etsiä tyypillisimpiä syitä projektien epäonnistumiseen ja löytää projektien seurannan ja mittaamisen avulla keinoja näiden epäonnistumisten ehkäisemiseen. Tutkimusmenetelmänä on laadullinen tapaustutkimus. Empiirinen aineisto on kerätty haastattelujen, eri materiaalien analysoinnin ja havainnoinnin avulla. Teoriaosuus tarjoaa kattavan yhteenvedon projektiliiketoiminnan ja yksittäisten projektien johtamiseen sekä projektien seurantaan ja mittaamiseen aikaisemman kirjallisuuden perusteella. Empiirisessä osiossa suoritetaan analyysi Case -yrityksen projektien seurantaan ja valittuihin projekteihin. Analyysien, haastattelujen ja havainnoinnin pohjalta tehdään johtopäätökset tyypillisimmistä, ongelmia projekteissa aiheuttavista tekijöistä sekä näiden esiintymisestä projektin elinkaaren eri vaiheissa. Mahdolliset ongelmia ehkäisevät keinot esitetään myös. Ehdotuksia kehityskohteiksi esitetään lopuksi teorian ja empirian pohjalta.

Käyttövarmuusanalyysin tuottama tärkeysjärjestys elintarviketeollisuuden prosessilaitteille – Suuntaviivat kustannustietoisen kunnossapitostrategian luomiselle

Hallitsematon ja reaktiivinen kunnossapito on eräs tuotannon suurimpia kustannustekijöistä. Suunnitelmallisesti ja systemaattisesti johdettuna kunnossapito on tuotantotehokkuuden suurin vaikuttaja. Merkittävä osa tuotannon tehokkuuden ylläpidosta saavutetaan laitteiden käyttövarmuudella. Käyttövarmuuden saaminen hallintaan perustuu ennakoivan kunnossapidon määrän kasvattamiseen. Samalla korjaavan kunnossapidon kustannusriski laskee ja siihen käytetty panos vähenee. Huonolla kunnossapidon suunnitelmallisuudella on päinvastaiset vaikutukset. Tavoitteena on määritellä prosessilaitteiden käyttövarmuuksiin perustuva laitekriittisyys. Tutkimuksessa yhdistetään riskien arviointimenetelmiä, joilla keskimääräiset vikavälit ja seuraukset valmistukseen mallinnetaan. Kriittisyystekijöitä ovat käytettävyys, luotettavuus, kustannustekijät, turvallisuus ja ympäristövaikutukset. Tekijöiden arvottamiseen kehitettiin riksianalyysitaulukko. Kriittisyysluokat jaettiin kolmeen kategoriaan, joista A on kriittisin, B keskinkertainen ja C on matalin luokka. Lähtötietojen keräys toteutettiin triangulaatiomenetelmää soveltaen. Empiirisessä osassa HKScan Oy:n lihanjalostustehtaan jauheliha- ja kestomakkaraosastojen laitteet jaettiin A-, B- ja C-luokkiin. Kriittisimpiä laitteita oli 20 prosenttia analysoidusta laitemäärästä. Nämä A-luokkaan sijoitetut laitteet aiheuttavat 80 prosenttia kustannusriskeistä. B-luokkaan kuuluu 50 prosenttia ja C-luokkaan 30 prosenttia laitteista. Luokittelusta erotettiin havaitut turvallisuusriskit riskienhallinnan toimenpiteitä varten. Kustannustietoinen kriittisyysluokittelu on pohja kunnossapitostrategian rakentamiselle. Tämän avuksi esitettiin taulukot huolto-ohjelman luomiseen ja luokituksien hyödyntämiseen päivittäisessä toiminnassa.

Studies in selectivity of lipases in preparation of cyanohydrins, sugar conjugates and secondary alcohols

Biocatalysis can be applied in organic synthetic chemistry to counter challenges posed by increased demands towards chemo-, regio- and stereoselectivity, not forgetting the need for greener chemistry. During the last 30 years, biocatalysis with the use of enzymes as chiral catalysts has become more common in chemistry laboratories and industrial processes. In this thesis, the use of lipases as versatile biocatalysts in the acylation of alcohols is examined both in the light of literature examples and four original publications. In the first part of the work presented in this thesis lipases were utilized in two examples concerning secondary alcohols. First, the kinetic resolution of heterocyclic aromatic secondary alcohols through transesterification was thoroughly examined including the studies of competing hydrolysis and esterification reactions. In another example, lipases were utilized in the formation of a dynamic systemic resolution (DSR) process which in turn was used as a developmental tool in the optimization of the dynamic kinetic resolution (DKR) of five heterocyclic aromatic cyanohydrins in one pot for the preparation of cyanohydrin esters as single enantiomers. In the second part of the work, the regio- and stereoselectivity of lipases was used to form sugar conjugates of glyceric and β-amino acids. The primary hydroxyl groups of methyl α-D-galacto-, -gluco- and -mannopyranosides were now acylated trough lipasecatalyzed transesterification and enantioselective lipase-catalyzed ring-opening of β- lactams, respectively.

Expression of CD40 ligand, interferon-gamma and Fas ligand genes in endomyocardial biopsies of human cardiac allografts: correlation with acute rejection

The purpose of the present study was to investigate the expression (mRNA) of CD40 ligand (CD40L), interferon-gamma (IFN-gamma) and Fas ligand (FasL) genes in human cardiac allografts in relation to the occurrence of acute cardiac allograft rejection as well as its possible value in predicting acute rejection. The mRNA levels were determined by a semiquantitative reverse transcriptase-polymerase chain reaction method in 39 samples of endomyocardial biopsies obtained from 10 adult cardiac transplant recipients within the first six months after transplantation. Biopsies with ongoing acute rejection showed significantly higher CD40L, IFN-gamma and FasL mRNA expression than biopsies without rejection. The median values of mRNA expression in biopsies with and without rejection were 0.116 and zero for CD40L (P<0.003), 0.080 and zero for IFN-gamma (P<0.0009), and 0.156 and zero for FasL (P<0.002), respectively. In addition, the levels of IFN-gamma mRNA were significantly increased 7 to 15 days before the appearance of histological evidence of rejection (median of 0.086 in pre-rejection biopsies), i.e., they presented a predictive value. This study provides further evidence of heightened expression of immune activation genes during rejection and shows that some of these markers may present predictive value for the occurrence of acute rejection.

Dimensions and dynamics in integrin function

Integrins play crucial roles in cell adhesion, migration, and signaling by providing transmembrane links between the extracellular matrix and the cytoskeleton. Integrins cluster in macromolecular complexes to generate cell-matrix adhesions such as focal adhesions. In this mini-review, we compare certain integrin-based biological responses and signaling during cell interactions with standard 2D cell culture versus 3D matrices. Besides responding to the composition of the matrix, cells sense and react to physical properties that include three-dimensionality and rigidity. In routine cell culture, fibroblasts and mesenchymal cells appear to use focal adhesions as anchors. They then use intracellular actomyosin contractility and dynamic, directional integrin movements to stretch cell-surface fibronectin and to generate characteristic long fibrils of fibronectin in "fibrillar adhesions". Some cells in culture proceed to produce dense, three-dimensional matrices similar to in vivo matrix, as opposed to the flat, rigid, two-dimensional surfaces habitually used for cell culture. Cells within such more natural 3D matrices form a distinctive class of adhesion termed "3D-matrix adhesions". These 3D adhesions show distinctive morphology and molecular composition. Their formation is heavily dependent on interactions between integrin alpha5ß1 and fibronectin. Cells adhere much more rapidly to 3D matrices. They also show more rapid morphological changes, migration, and proliferation compared to most 2D matrices or 3D collagen gels. Particularly notable are low levels of tyrosine phosphorylation of focal adhesion kinase and moderate increases in activated mitogen-activated protein kinase. These findings underscore the importance of the dimensionality and dynamics of matrix substrates in cellular responses to the extracellular matrix.

Comparison of angular frequency contrast sensitivity in young and older adults

The aim of the present study was to measure contrast sensitivity curves for angular frequencies in the range between 2 and 96 cycles/360º in older human adult volunteers and to compare these measurements with the more usual contrast sensitivity functions for sine-wave gratings. All subjects were free of identifiable ocular disease and had normal acuity. We measured the contrast thresholds for young adults (N = 6; age range, 20-26 years) and older adults (N = 6; age range, 60-67 years) using the psychophysical forced-choice method. In this paradigm the volunteers had to choose the stimulus containing a test frequency at low contrast (e.g., either a sine-wave grating or an angular frequency stimulus), or another neutral stimulus at mean luminance (without any contrast). Older adults presented a loss in contrast sensitivity at high and medium angular frequencies compared to the young adults (i.e., from 8 to 96 cycles/360º). Contrary to expectation, contrast sensitivity at low angular frequencies, i.e., 2 and 4 cycles/360º, was better for the older group than for the younger group. On the other hand, contrast sensitivity for sine-wave gratings at 3 and 4 cpd was higher for young adults as expected. These results suggest age-related changes in the contrast sensitivity function for angular frequencies.

Hypotrophy of conduit artery walls of the offspring of nitric oxide-defective rats

The objective of the present study was to investigate the structure of the arterial walls of the offspring stemming from nitric oxide (NO)-defective hypertensive parents. The parents were treated with N G-nitro-L-arginine methyl ester (40 mg kg-1 day-1) for 5 weeks. Blood pressure was measured noninvasively in six 30-day-old rats and nine age-matched controls. The cardiovascular system was perfused with glutaraldehyde at 120 mmHg. The thoracic aorta and carotid artery were processed for electron microscopy, and geometry was determined by light microscopy. Endothelial cells, smooth muscle cells (SMC) and extracellular matrix (ECM) were determined by the point counting method in electron micrographs of the carotid artery. The blood pressure of experimental offspring was 150.0 ± 2.3 vs 104.6 ± 2.1 mmHg (P < 0.01) for the controls and their heart/body weight ratio of 3.9 ± 0.1 vs 4.4 ± 0.2 (P < 0.05) for the controls indicated cardiac hypotrophy. The wall thickness (tunica intima and media) of the thoracic aorta and carotid artery of experimental offspring was decreased to 78.9% (P < 0.01) and 83.8% (P < 0.01), respectively, compared to controls, as confirmed by a respective cross-sectional area of 85.3% (P < 0.01) and 84.1% (P < 0.01). The wall thickness/inner diameter ratio was reduced to 75% (P < 0.01) in the thoracic artery and to 81.5% (P < 0.01) in the carotid artery. No change in endothelial cell volume density or ECM was observed in the tunica intima of the carotid artery, and SMC volume density was lower in the tunica media (37.6 ± 0.9 vs 44.7 ± 1.1% for controls, P < 0.01), indicating compromised SMC development. Interference with arginine metabolism, a decrease in NO, and other factors are possible mechanisms underlying the structural alterations of the cardiovascular system of offspring from NO-defective hypertensive rats.

Pim-1 kinase inhibits the activation of reporter gene expression in Elk-1 and c-Fos reporting systems but not the endogenous gene expression: an artifact of the reporter gene assay by transient co-transfection

We have studied the molecular mechanism and signal transduction of pim-1, an oncogene encoding a serine-threonine kinase. This is a true oncogene which prolongs survival and inhibits apoptosis of hematopoietic cells. In order to determine whether the effects of Pim-1 occur by regulation of the mitogen-activated protein kinase pathway, we used a transcriptional reporter assay by transient co-transfection as a screening method. In this study, we found that Pim-1 inhibited the Elk-1 and NFkappaB transcriptional activities induced by activation of the mitogen-activated protein kinase cascade in reporter gene assays. However, Western blots showed that the induction of Elk-1-regulated expression of endogenous c-Fos was not affected by Pim-1. The phosphorylation and activation of neither Erk1/2 nor Elk-1 was influenced by Pim-1. Also, in the gel shift assay, the pattern of endogenous NFkappaB binding to its probe was not changed in any manner by Pim-1. These data indicate that Pim-1 does not regulate the activation of Erk1/2, Elk-1 or NFkappaB. These contrasting results suggest a pitfall of the transient co-transfection reporter assay in analyzing the regulation of transcription factors outside of the chromosome context. It ensures that results from reporter gene expression assay should be verified by study of endogenous gene expression.

Biodistribution of 99m technetium- labeled creatinine in healthy rats

The distribution of creatinine, one of the toxic guanidine compounds, in various tissues has not been studied in detail by using radiolabeled creatinine. Our objective was to investigate the biodistribution of creatinine labeled with 99m technetium (99mTc) by the stannous (II) chloride method in healthy male Wistar rats. Quality controls were carried out by radio thin layer chromatography, high-performance liquid chromatography, and paper electrophoresis. The labeling yield was 85 ± 2% under optimum conditions (pH 7 and 100 µg stannous chloride). Rats (N = 12) were injected intravenously with 99mTc-creatinine and their blood and visceral organs were evaluated for 99mTc-creatinine uptake as percent of the injected dose per gram wet weight of each tissue (%ID/g). The lowest amount of uptake was detected in the brain and testis. When the rate of uptake was evaluated, only the kidney showed increasing rates of uptake of 99mTc-creatinine throughout the study. Kidneys showed the highest amount of uptake throughout the study (P < 0.001 compared to all other organs), followed by liver, spleen and lung tissue.