The role of petals in development of grey mould in strawberries

Studies were conducted in annual crops of strawberry (Fragaria x ananassa) (cv. Elsanta to assess the relative importance of petals as an inoculum source of grey mould, caused by Botrytis cinerea and to identify during which period of flower and fruit development the presence of petals has a significant effect on development of grey mould on fruits. In 1998, the incidence of B. cinerea on flower parts was assessed, and the symptoms of grey mould on fruits were characterised with regards to their starting point. The incidence of B. cinerea on petals was 65-85% of those flowers that harboured B. cinerea. The starting point of symptoms was located underneath the sepals in 65-85% of fruits with grey mould, and petals were present at this site in about 50% of the cases. In 1999, four field experiments were conducted to assess the effect of petal removal at different stages of flower and fruit development on incidence of grey mould. The incidence of grey mould on fruits with petals retained till harvest was circa 55% more than on fruits where petals were removed or had dropped naturally by the end of flowering, regardless of planting date or inoculum level of B. cinerea. The incidence of grey mould was hardly different between treatments where petals were removed at young flower stage, old flower stage, or green fruit stage. It is concluded that petals are an effective and stable source of inoculum for fruit infection by B. cinerea. Considering the high probability that retention of petals during fruit expansion and ripening results in fruit infection, the elimination of petals as an inoculum source appears worthwhile even when the incidence of petal retention on fruits is relatively low.

Estimation of existing cable systems in generator-busbar unit and choice the optimal solution for its modernization

The aim of this master’s thesis is to develop an algorithm to calculate the cable network for heat and power station CHGRES. This algorithm includes important aspect which has an influence on the cable network reliability. Moreover, according to developed algorithm, the optimal solution for modernization cable system from economical and technical point of view was obtained. The conditions of existing cable lines show that replacement is necessary. Otherwise, the fault situation would happen. In this case company would loss not only money but also its prestige. As a solution, XLPE single core cables are more profitable than other types of cable considered in this work. Moreover, it is presented the dependence of value of short circuit current on number of 10/110 kV transformers connected in parallel between main grid and considered 10 kV busbar and how it affects on final decision. Furthermore, the losses of company in power (capacity) market due to fault situation are presented. These losses are commensurable with investment to replace existing cable system.

Immersion enthalpy variation of surface-modified mineral activated carbon in lead (II) aqueous solution adsorption: the relation between immersion enthalpy and adsorption capacity

An activated carbon was obtained by chemical activation with phosphoric acid, CM, from a mineral carbon. Afterwards, the carbon was modified with 2 and 5 molL-1, CMox2 and CMox5 nitric acid solutions to increase the surface acid group contents. Immersion enthalpy at pH 4 values and Pb2+ adsorption isotherms were determined by immersing activated carbons in aqueous solution. The surface area values of the adsorbents and total pore volume were approximately 560 m².g-1 and 0.36 cm³g-1, respectively. As regards chemical characteristics, activated carbons had higher acid sites content, 0.92-2.42 meq g-1, than basic sites, 0.63-0.12 meq g-1. pH values were between 7.4 and 4.5 at the point of zero charge, pH PZC. The adsorbed quantity of Pb2+ and the immersion enthalpy in solution of different pH values for CM activated carbon showed that the values are the highest for pH 4, 15.7 mgg-1 and 27.6 Jg-1 respectively. Pb2+ adsorption isotherms and immersion enthalpy were determined for modified activated carbons and the highest values were obtained for the activated carbon that showed the highest content of total acid sites on the surface.

Heating control of an electrical motor

Electrical motors on a ship attackable to different factors which decrease these lifetimes. One of the main external factors on a ship which usually is a reason of the motor failure is a moisture condensation which decreases the motor winding insulation and increase a probability of the short circuit. Therefore, the protection against moisture is necessary for ship electrical motors. The motor should be protected against moisture all time when it does not operate. The necessity of such protection requires a lot of energy consumption. This master’s thesis is focused on the creation of the electrical motor thermal model and on the different methods of the motor protection against moisture analysis with energy consumption point of view.

Design of an adsorbent employing activated carbon fiber to remove lead

Zorflex® activated carbon fibers (ACF), reference FM100 198B, are used before and after an oxidizing procedure with H3PO4 to study the adsorption of Pb2+. The point of zero charge was determined for the modified and unmodified fiber giving values of 2.3 and 4.3, respectively. After oxidizing the ACF, the fiber showed to have a greater Pb2+ adsorption capacity in comparison with the unmodified fiber, which is related with the acid sites increase, where lead was mainly adsorbed. Determination of the BET area was carried out by nitrogen physisorption at 77K. ACFs presented superficial areas between 1000 and 1500 m²/g showing mostly, a microporous structure. The preliminary design of an adsorbent using the modified fiber is presented where the fiber superior physicochemical properties over the unmodified one are observed.

The determination of EONIA rate: The impact of the financial crisis and the effects of the changes in the monetary policy implementation framework

EONIA is a market based overnight interest rate, whose role as the starting point of the yield curve makes it critical from the perspective of the implementation of European Central Bank´s common monetary policy in the euro area. The financial crisis that started in 2007 had a large impact on the determination mechanism of this interest rate, which is considered as the central bank´s operational target. This thesis examines the monetary policy implementation framework of the European Central Bank and changes made to it. Furthermore, we discuss the development of the recent turmoil in the money market. EONIA rate is modelled by means of a regression equation using variables related to liquidity conditions, refinancing need, auction results and calendar effects. Conditional volatility is captured by an EGARCH model, and autocorrelation is taken into account by employing an autoregressive structure. The results highlight how the tensions in the initial stage of the market turmoil were successfully countered by ECB´s liquidity policy. The subsequent response of EONIA to liquidity conditions under the full allotment liquidity provision procedure adopted after the demise of Lehman Brothers is also established. A clear distinction in the behavior of the interest rate between the sub-periods was evident. In the light of the results obtained, some of the challenges posed by the exit-strategy implementation will be addressed.

Traffic flow development at North European company level with respect of China and Russia

The aim of the thesis is to analyze traffic flows and its development from North European companies` point of view to China and Russia using data from logistics questionnaire. Selected North European companies are large Finnish and Swedish companies. The questionnaire was sent via email to the target group. The study is based on the answers got from respondent companies from years 2006, 2009 and 2010. In the thesis Finnish Talouselämä newspaper and Swedish Affärsdata are used as a database to find the target companies for the survey. Respondents were most often logistics managers in companies. In the beginning of the thesis concepts of transportation logistics is presented, including container types, trade terms, axel loads in roads and in railways. Also there is information about warehousing types and terminals. After that, general information of Chinese and Russian transportation logistics is presented. Chinese and Russian issues are discussed in two sections. In both of them it is analyzed economic development, freight transport and trade balance. Some practical examples of factory inaugurations in China and Russia are presented that Finnish and Swedish companies have completed. In freight transport section different transportation modes, logistics outsourcing and problems of transportation logistics is discussed. The results of the thesis show that transportation flows between Europe and China is changing. Freight traffic from China to European countries will strengthen even more from the current base. When it comes to Russia and Europe, traffic flows seem to be changing from eastbound traffic to westbound traffic. It means that in the future it is expected more freight traffic from Russia to Europe. Some probable reasons for that are recent factory establishments in Russia and company interviews support also this observation. Effects of the economic recession are mainly seen in the lower transportation amounts in 2009.

Comparison of the dehydration kinetics of solid state compounds of 2-methoxybenzylidenepyruvate with some divalent metal ions

Divalent metal complexes of ligand 2-methoxybenzylidenepyruvate with Fe, Co, Ni, Cu and Zn as well as sodium salt were synthesized and investigated in the solid state. TG curves of these compounds were obtained with masses sample of 1 and 5mg under nitrogen atmosphere. Different heating rates were used to characterize and study these compounds from the kinetic point of view. The activation energy and pre-exponential factor were obtained applying the Wall-Flynn-Ozawa method to the TG curves. The obtained data were evaluated and the values of activation energy (Ea / kJ mol-1) was plotted in function of the conversion degree (α). The results show that due to mass sample, different activation energies were obtained. The results are discussed mainly taking into account the linear dependence between the activation energy and the pre exponential factor, where was verified the effect of kinetic compensation (KCE) and possible linear relations between the dehydrations steps of these compounds.

BUDDHISM AND MODERNITY: IN THE MARGIN OF DONALD S. LOPEZ JR.'S "BUDDHISM AND SCIENCE

ABSTRACT The present article aims at setting the issue of the relationship between Buddhism and science in a historical and philosophical frame wider than that one taken into account by the international scholarship so far. The historical point of view allows us to conclude that the narrative that connects Buddhism with science is not based on features intrinsic to Buddhist thought. In fact, such narrative prospered thanks to the development of a dialectic, typical of the 18th and 19th centuries, between science and religion. The philosophical point of view allows us to conclude that such narrative is backed by a metaphysical-like thought that denies the specificity of both science and Buddhism.

Simulation of hydrogen peroxide direct synthesis in a microreactor

A set of models in Aspen plus was built to simulate the direct synthesis process of hydrogen peroxide in a micro-reactor system. This process model can be used to carry out material balance calculation under various experimental conditions. Three thermodynamic property methods were compared by calculating gas solubility and Uniquac-RK method was finally selected for process model. Two different operation modes with corresponding operation conditions were proposed as the starting point of future experiments. Simulations for these two modes were carried out to get the information of material streams. Moreover, some hydrodynamic parameters such as gas/liquid superficial velocity, gas holdup were also calculated with improved process model. These parameters proved the proposed experimental conditions reasonable to some extent. The influence of operation conditions including temperature, pressure and circulation ratio was analyzed for the first operation mode, where pure oxygen was fed into dissolving tank and hydrogen-carbon dioxide mixture was fed into microreactor directly. The preferred operation conditions for the system are low temperature (2°C) and high pressure (30 bar) in dissolving tank. High circulation ratio might be good in the sense that more oxygen could be dissolved and fed into reactor for reactions, but meanwhile hydrodynamics of microreactor should be considered. Furthermore, more operation conditions of reactor gas/liquid feeds in both of two operation modes were proposed to provide guidance for future experiment design and corresponding hydrodynamic parameters were also calculated. Finally, safety issue was considered from thermodynamic point of view and there is no explosion danger at given experimental plan since the released reaction heat will not cause solvent vaporization inside the microchannels. The improvement of process model still needs further study based on the future experimental results.

Dialogue in the crisis of representation : realism and antirealism in the context of the conversation between theologians and quantum physicists in Göttingen 1949-1961

The aim of this study is to analyse the content of the interdisciplinary conversations in Göttingen between 1949 and 1961. The task is to compare models for describing reality presented by quantum physicists and theologians. Descriptions of reality indifferent disciplines are conditioned by the development of the concept of reality in philosophy, physics and theology. Our basic problem is stated in the question: How is it possible for the intramental image to match the external object?Cartesian knowledge presupposes clear and distinct ideas in the mind prior to observation resulting in a true correspondence between the observed object and the cogitative observing subject. The Kantian synthesis between rationalism and empiricism emphasises an extended character of representation. The human mind is not a passive receiver of external information, but is actively construing intramental representations of external reality in the epistemological process. Heidegger's aim was to reach a more primordial mode of understanding reality than what is possible in the Cartesian Subject-Object distinction. In Heidegger's philosophy, ontology as being-in-the-world is prior to knowledge concerning being. Ontology can be grasped only in the totality of being (Dasein), not only as an object of reflection and perception. According to Bohr, quantum mechanics introduces an irreducible loss in representation, which classically understood is a deficiency in knowledge. The conflicting aspects (particle and wave pictures) in our comprehension of physical reality, cannot be completely accommodated into an entire and coherent model of reality. What Bohr rejects is not realism, but the classical Einsteinian version of it. By the use of complementary descriptions, Bohr tries to save a fundamentally realistic position. The fundamental question in Barthian theology is the problem of God as an object of theological discourse. Dialectics is Barth¿s way to express knowledge of God avoiding a speculative theology and a human-centred religious self-consciousness. In Barthian theology, the human capacity for knowledge, independently of revelation, is insufficient to comprehend the being of God. Our knowledge of God is real knowledge in revelation and our words are made to correspond with the divine reality in an analogy of faith. The point of the Bultmannian demythologising programme was to claim the real existence of God beyond our faculties. We cannot simply define God as a human ideal of existence or a focus of values. The theological programme of Bultmann emphasised the notion that we can talk meaningfully of God only insofar as we have existential experience of his intervention. Common to all these twentieth century philosophical, physical and theological positions, is a form of anti-Cartesianism. Consequently, in regard to their epistemology, they can be labelled antirealist. This common insight also made it possible to find a common meeting point between the different disciplines. In this study, the different standpoints from all three areas and the conversations in Göttingen are analysed in the frameworkof realism/antirealism. One of the first tasks in the Göttingen conversations was to analyse the nature of the likeness between the complementary structures inquantum physics introduced by Niels Bohr and the dialectical forms in the Barthian doctrine of God. The reaction against epistemological Cartesianism, metaphysics of substance and deterministic description of reality was the common point of departure for theologians and physicists in the Göttingen discussions. In his complementarity, Bohr anticipated the crossing of traditional epistemic boundaries and the generalisation of epistemological strategies by introducing interpretative procedures across various disciplines.

Palveluyrityksen brändin vaikutus ostopäätökseen b2b-markkinoilla

Tutkimuksen tavoitteena on kuvata brändin olemusta ja menestystekijöitä ja ymmärtää palveluyrityksen brändin vaikutus ostotilanteessa b2b-markkinoilla. Tutkittavaa ongelmaa lähestytään teoreettisen ja empiirisen tutkimuksen kautta. Empiirisen näkökulman tutkimukseen tuo case-yritys, monipalveluyhtiö Barona, jonka brändin merkitystä ostotilanteessa b2b-markkinoilla tutkimuksessa arvioidaan. Tutkimuksen pääongelma on seuraava: Miten palveluyrityksen brändi vaikuttaa ostopäätökseen b2b-markkinoilla? Tutkimuksen lähestymistapa on kvalitatiivinen eli laadullinen. Tutkimusstrategia on case- eli tapaustutkimus ja tutkimusmenetelmänä on käytetty teemahaastattelua. Brändikokemuksen syntymistä ja sen vaikutusta ostopäätökseen tarkastellaan empiriaosiossa asiakkaan ja brändin hallinnoijan, eli Baronan, näkökulmasta. Tutkimuksen tulokset tukevat sitä olettamusta, että palveluyrityksen brändillä on vaikutusta ostopäätöksessä myös b2b-markkinoilla. Brändit b2b-markkinoilla ovat saaneet kuluttajamarkkinoita vähemmän huomiota, sillä brändien vaikutus ostopäätöksessä koetaan irrationaaliseksi tekijäksi, ja yritysmarkkinoilla ostajien on ajateltu tekevän päätökset täysin rationaalisin perustein. Myös b2b-markkinoilla on päätöksentekijänä kuitenkin yksilö, ei organisaatio. Palvelua ostaessaan ostaja perustelee valintansa järkisyillä, kuten laadulla. Todelliset syyt hankintaan voivat kuitenkin olla hyvin toisenlaiset, kuten brändin status, menestys tai arvostus. Brändi on merkittävässä asemassa myös b2b-asiakkaan ostopäätösprosessissa, varsinkin silloin, kun erottautuminen on vaikeaa. Siinä missä palvelu itsessään lunastaa lupaustaan käyttäjälle, brändi tuottaa lisäarvoa yli palvelun toiminnallisen tarkoituksen. Brändi saa palvelun vaikuttamaan paremmalta. Tietynmerkkisen palvelun nähdessään asiakas odottaa sen tarjoavan tietyt asiat. Asiakas haluaa luottaa siihen, että laatu pysyy samana, eikä palvelua tarvitse joka kerta arvioida erikseen. Asiakas ostaa brändiin sisältyviä laatulupauksia omien tarpeidensa täyttämiseksi tehden valintansa sen perusteella, mitä hyötyä ja arvoa hän odottaa saavansa rahojensa vastineeksi.

The role of consistency in empirical science

Any inconsistent theory whose underlying logic is classical encompasses all the sentences of its own language. As it denies everything it asserts, it is useless for explaining or predicting anything. Nevertheless, paraconsistent logic has shown that it is possible to live with contradictions and still avoid the collapse of the theory. The main point of this paper is to show that even if it is formally possible to isolate the contradictions and to live with them, this cohabitation is neither desired by working scientists not desirable for the progress of science. Several cases from the recent history of physics and cosmology are analyzed.

The notion of process in nonstandard theory and in Whiteheadian metaphysics

In this article I intend to show that certain aspects of A.N. Whitehead's philosophy of organism and especially his epochal theory of time, as mainly exposed in his well-known work Process and Reality, can serve in clarify the underlying assumptions that shape nonstandard mathematical theories as such and also as metatheories of quantum mechanics. Concerning the latter issue, I point to an already significant research on nonstandard versions of quantum mechanics; two of these approaches are chosen to be critically presented in relation to the scope of this work. The main point of the paper is that, insofar as we can refer a nonstandard mathematical entity to a kind of axiomatical formalization essentially 'codifying' an underlying mental process indescribable as such by analytic means, we can possibly apply certain principles of Whitehead's metaphysical scheme focused on the key notion of process which is generally conceived as the becoming of actual entities. This is done in the sense of a unifying approach to provide an interpretation of nonstandard mathematical theories as such and also, in their metatheoretical status, as a formalization of the empirical-experimental context of quantum mechanics.

Packaging concept development for an assortment of medical device products

Diplomityön tavoitteena oli kehittää Wipak Oy:n valmistamille sterilointipakkauksille tulevaisuuden pakkauskonsepti. Sterilointipakkaukset luokitellaan lääkelaitedirektiivin mukaan lisätarvikkeiksi luokan 1 lääkelaitteille, ja tämä näkökulma oli vahvasti mukana konseptin kehityksessä. Lähtökohtana pakkauskonseptin suunnittelulle oli tuotteiden arvoketjussa, eli pakata tuotteet siten että pakkausten avulla voidaan tuottaa lisäarvoa arvoketjun toimijoille. Tavoitteena oli parantaa pakkausten viestintää, toimivuutta/tehokkuutta toimitusketjussa sekä vahvistaa brändin imagoa myynti- ja kuljetuspakkauksen avulla. Lääkinnälliset laitteet ja tarvikkeet ovat lainsäädännön ja normien avulla tarkasti säädeltyjä. Näiden normien vaatimukset asettavat perusteet myynti- ja kuljetuspakkausten kehittämiselle. Tämän lisäksi suunnittelussa on huomioitu asiakkaiden toiveet ja kehitystarpeet. Kirjallisuusosuudessa on keskitytty lääkinnällisten laitteiden pakkausyksiköiden toimintoihin sekä niiden kehitysnäkymiin. Pääpaino on ollut pakkausmerkintöjen ja jäljitettävyyden kehittämisellä, koska tietojen automaattisen tunnistuksen hyödyntäminen lääkintälaitteiden pakkausten arvoketjussa on kasvava trendi. Manuaalisesti tehtävät tuotevirtojen kirjaukset ketjun eri toimijoiden osalta lisäävät riskejä jäljitettävyyden kannalta ja aiheuttavat lisätyötä ja – kustannuksia ketjun kaikille osapuolille. Ehdotus uudesta pakkauskonseptista on kehitetty näiden tietojen pohjalta. Ehdotuksessa on huomioitu lainsäädännöstä ja ketjun toimijoilta tulevat tarpeet, sekä alan tulevaisuuden kehitysnäkymät. Ehdotetun pakkauskonseptin avulla saadaan lisättyä myynti- ja kuljetuspakkausten tehokkuutta, parannettua jäljitettävyyttä ja helpotettu arvoketjun alavirran toimijoiden työtä lisäämällä erillinen sisäpakkaus myyntiyksikön sisälle. Työssä on lisäksi selvitetty pakkauskonseptin kustannusvaikutukset tuotteiden hintaan. Lopussa on ehdotettu jatkotoimenpiteet suunnitelman implementoimisesta käytäntöön.