Financial and Environmental Impacts of a Dry Port to Facilitate Competitiveness of Two Major Transit Seaports of Finland

Environmental problems and issues have received more and more attention during the last decades. Reasons for this are different increased external costs such as congestion, CO2 emission, noise and accident costs. Transportation sector is the only sector with increasing external costs. The EU will increase its attention in decreasing the external costs of transport. Aim of this research was to find out if a dry port solution could decrease costs of transport, especially external costs. Dry port concept is an intermodal transport system, where inland transport between port and dry port is performed by rail transport instead of traditional road transport. In addition, dry ports offer similar services as ports. Research is conducted by performing a literature review about dry port concept and costs of transport, especially external costs of transport. Financial and environmental impacts of the dry port concept are studied by comparing costs of road and rail transport by cost accounting and with a simulation model. Location of dry port is researched with gravitational models. Results of the literature review are that rail transport is environmentally friendlier mode of transport than road transport. Cost model and simulation model show that if only costs of freight movement are considered, rail transport is more inexpensive transport mode than road transport in terms of internal and external costs. Because of that dry port concept could decrease costs of transport, especially external costs. Results of gravitational models are that city of Kouvola is in a good position to be a dry port. Russian transit traffic through Finland improves location of Kouvola to be a dry port.

Uusperheen voimavarat ja lasten hyvinvointi

The resources of the step family and the children’s well-being The present study investigates children's well-being in stepfamilies and fac¬tors, both external and internal, that are related to the children's well-being. Of the external factors, the study focuses on factors related to the structure of the stepfamily, parents' education, socio-economic status and factors related to work, livelihood and living conditions. The internal resources include the general functioning of the family, parenthood and parenting, family support networks and issues that the stepfamilies themselves consider important. Another important resource in a stepfamily is a functioning network of human relationships, which in the present study is approached from the maternal viewpoint. Changing family relations are considered a potential threat to the children's well-being. Therefore, in addition to looking into the stepfamily's resources, the other important goal of the study is to explore other factors potentially related to the well-being of children living in stepfamilies. In view of the stepfamily's resources, it is important to explore how the functioning of the relationships network is linked with the child's well-being. The study employs survey and interview data. The survey data (n=2236) are part of national survey data on the well-being of families and children and factors impacting them which were gathered as part of ”Origins of Exclusion in Early Childhood”, a research project carried out in 2002. The data consists of 667 stepfamilies. The interview data consists of interviews with 24 parents in stepfamilies. In the study, the analyses of survey and interview data are combined. Both descriptive statistical analyses and multivariate methods are employed. Content analysis is employed in the analysis of the interview data. The results indicate that the stepfamilies’ resources in general but their external resources in particular differed from those of the nuclear and single-parent families. The level of education and the socio-economic status of the stepfamily parents were somewhat lower than those of the nuclear family parents. The differences in relation to single-parent families were primarily related to the better economic status of the stepfamilies. The analysis of internal resources showed relatively minor differences: the stepfamilies assessed themselves a somewhat better general functioning of the family than did the nuclear families. Parenting issues caused more disagreement in stepfamilies than in nuclear families. The analysis of the functioning of the human relations in stepfamilies showed that the stepfamily mothers experienced the external relationships of the family (e.g., between the child and the absent father) as significantly more problematic than the relationships within the stepfamily. Living in a stepfamily thus challenges the functioning of the relationship between the child and the absent father. As a result of the analysis of the relationships networks in the stepfamilies, three groups were formed. One group had the nuclear family as an ideal goal, another valued an extended family composed of a variety of relationships, and the third one appreciated a strong intimate relationship between the parents. In the present study, the most common group was the multi-relationship, extended type of stepfamily. In conclusion, living in a stepfamily does not seem to pose a risk to the child’s well-being, but it may influence the family’s resources and thus have an indirect effect on the child’s well-being. In view of the resources of the stepfamily, the child’s well-being was best supported by a functioning network of human relationships in the stepfamily: there was a distinct connection with the children’s problems and the non-functioning of the relationships network. According to the mothers, the internal relationships in the stepfamily seemed to be more important than the external relationships of the family. A child’s functioning relationship with the absent father can be viewed as a positive resource, supporting the child’s well-being in the stepfamily.

CFD Simulation of Two-phase and Three-phase Flows in Internal-loop Airlift

Airlift reactors are pneumatically agitated reactors that have been widely used in chemical, petrochemical, and bioprocess industries, such as fermentation and wastewater treatment. Computational Fluid Dynamics (CFD) has become more popular approach for design, scale-up and performance evaluation of such reactors. In the present work numerical simulations for internal-loop airlift reactors were performed using the transient Eulerian model with CFD package, ANSYS Fluent 12.1. The turbulence in the liquid phase is described using κ- ε the model. Global hydrodynamic parameters like gas holdup, gas velocity and liquid velocity have been investigated for a range of superficial gas velocities, both with 2D and 3D simulations. Moreover, the study of geometry and scale influence on the reactor have been considered. The results suggest that both, geometry and scale have significant effects on the hydrodynamic parameters, which may have substantial effects on the reactor performance. Grid refinement and time-step size effect have been discussed. Numerical calculations with gas-liquid-solid three-phase flow system have been carried out to investigate the effect of solid loading, solid particle size and solid density on the hydrodynamic characteristics of internal loop airlift reactor with different superficial gas velocities. It was observed that averaged gas holdup is significantly decreased with increasing slurry concentration. Simulations show that the riser gas holdup decreases with increase in solid particle diameter. In addition, it was found that the averaged solid holdup increases in the riser section with the increase of solid density. These produced results reveal that CFD have excellent potential to simulate two-phase and three-phase flow system.

Classification, comorbidity, heredity, and risk factors of female sexual dysfunctions

Female sexual dysfunctions, including desire, arousal, orgasm and pain problems, have been shown to be highly prevalent among women around the world. The etiology of these dysfunctions is unclear but associations with health, age, psychological problems, and relationship factors have been identified. Genetic effects explain individual variation in orgasm function to some extent but until now quantitative behavior genetic analyses have not been applied to other sexual functions. In addition, behavior genetics can be applied to exploring the cause of any observed comorbidity between the dysfunctions. Discovering more about the etiology of the dysfunctions may further improve the classification systems which are currently under intense debate. The aims of the present thesis were to evaluate the psychometric properties of a Finnish-language version of a commonly used questionnaire for measuring female sexual function, the Female Sexual Function Index (FSFI), in order to investigate prevalence, comorbidity, and classification, and to explore the balance of genetic and environmental factors in the etiology as well as the associations of a number of biopsychosocial factors with female sexual functions. Female sexual functions were studied through survey methods in a population based sample of Finnish twins and their female siblings. There were two waves of data collection. The first data collection targeted 5,000 female twins aged 33–43 years and the second 7,680 female twins aged 18–33 and their over 18–year-old female siblings (n = 3,983). There was no overlap between the data collections. The combined overall response rate for both data collections was 53% (n = 8,868), with a better response rate in the second (57%) compared to the first (45%). In order to measure female sexual function, the FSFI was used. It includes 19 items which measure female sexual function during the previous four weeks in six subdomains; desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain. In line with earlier research in clinical populations, a six factor solution of the Finnish-language version of the FSFI received supported. The internal consistencies of the scales were good to excellent. Some questions about how to avoid overestimating the prevalence of extreme dysfunctions due to women being allocated the score of zero if they had had no sexual activity during the preceding four weeks were raised. The prevalence of female sexual dysfunctions per se ranged from 11% for lubrication dysfunction to 55% for desire dysfunction. The prevalence rates for sexual dysfunction with concomitant sexual distress, in other words, sexual disorders were notably lower ranging from 7% for lubrication disorder to 23% for desire disorder. The comorbidity between the dysfunctions was substantial most notably between arousal and lubrication dysfunction even if these two dysfunctions showed distinct patterns of associations with the other dysfunctions. Genetic influences on individual variation in the six subdomains of FSFI were modest but significant ranging from 3–11% for additive genetic effects and 5–18% for nonadditive genetic effects. The rest of the variation in sexual functions was explained by nonshared environmental influences. A correlated factor model, including additive and nonadditive genetic effects and nonshared environmental effects had the best fit. All in all, every correlation between the genetic factors was significant except between lubrication and pain. All correlations between the nonshared environment factors were significant showing that there is a substantial overlap in genetic and nonshared environmental influences between the dysfunctions. In general, psychological problems, poor satisfaction with the relationship, sexual distress, and poor partner compatibility were associated with more sexual dysfunctions. Age was confounded with relationship length but had over and above relationship length a negative effect on desire and sexual satisfaction and a positive effect on orgasm and pain functions. Alcohol consumption in general was associated with better desire, arousal, lubrication, and orgasm function. Women pregnant with their first child had fewer pain problems than nulliparous nonpregnant women. Multiparous pregnant women had more orgasm problems compared to multiparous nonpregnant women. Having children was associated with less orgasm and pain problems. The conclusions were that desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain are separate entities that have distinct associations with a number of different biopsychosocial factors. However, there is also considerable comorbidity between the dysfunctions which are explained by overlap in additive genetic, nonadditive genetic and nonshared environmental influences. Sexual dysfunctions are highly prevalent and are not always associated with sexual distress and this relationship might be moderated by a good relationship and compatibility with partner. Regarding classification, the results supports separate diagnoses for subjective arousal and genital arousal as well as the inclusion of pain under sexual dysfunctions.

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

Problems and potentialities of e-Learning for regular undergraduate courses in emergency medicine

BACKGROUND: E-learning techniques are spreading at great speed in medicine, raising concerns about the impact of adopting them. Websites especially designed to host courses are becoming more common. There is a lack of evidence that these systems could enhance student knowledge acquisition. GOAL: To evaluate the impact of using dedicated-website tools over cognition of medical students exposed to a first-aid course. METHODS: Prospective study of 184 medical students exposed to a twenty-hour first-aid course. We generated a dedicated-website with several sections (lectures, additional reading material, video and multiple choice exercises). We constructed variables expressing the student's access to each section. The evaluation was composed of fifty multiple-choice tests, based on clinical problems. We used multiple linear regression to adjust for potential confounders. RESULTS: There was no association of website intensity of exposure and the outcome - beta-coeficient 0.27 (95%CI - 0.454 - 1.004). These findings were not altered after adjustment for potential confounders - 0.165 (95%CI -0.628 - 0.960). CONCLUSION: A dedicated website with passive and active capabilities for aiding in person learning had not shown association with a better outcome.

Tilaus-toimitusprosessin kehittäminen eräässä painotalossa

Tämä diplomityö on tehty painotaloon. Yrityksen tilaus-toimitusketjua on kehitetty ennen diplomityötä. Muutoksen kohteena on ollut toimintamallit, laatu, läpäisy ja tuotanto- ja varastotilojen layout, lisäksi koneitakin on uusittu ja korjattu runsaasti. Muutosten yhteydessä henkilöstöä sopeutettiin vastaamaan uutta toimintamallia ja samalla myös johtamisen vastuu jaettiin uudelleen. Diplomityö koostuu kolmesta merkittävästä osasta ja sen tarkoituksena on kuvata sisäiset prosessit ja kehittää valittuja ongelmia. Ensimmäinen osa käsittelee leania ja sen teoriaa. Lisäksi määritellään lean-työkalut, joita työssä hyödynnetään. Toinen osa keskittyy kuvaamaan työn käytännön osuutta, jossa selvitetään prosessin nykytilaa. Suuri osa tätä diplomityötä on työn tutkimista ja sen kuvaamista yksinkertaisilla prosessikuvauksilla. Nykytilan kuvauksessa etsittiin myös ongelmakohtia, joita käytetään osittain tämän työn kehitysprojekteissa. Ongelmakohtien listan avulla voidaan toteuttaa jatkossa jatkuvan parantamisen projekteja. Kolmas osa työstä liittyy valittujen kehitysprojektien toteutukseen. Ensin työssä kuvataan jatkuvan parantamisen projektien työskentelytavat ja perustellaan syyt projektien valintaan. Valinnan jälkeen kuvataan valittujen projektien toteuttaminen ja lopuksi käydään läpi tulokset. Lisäksi yhteenvedossa esitellään työstä syntyvät jatkotoimenpide-ehdotukset. Kehitysprojektien tuloksien perusteella pystyttiin arvioimaan tulevia kehityskohteita ja niihin käytettäviä työkaluja. Koska kyseessä oli pilottiprojekti, oppimista tapahtui paljon ja tulokset saattavat näyttää positiivisimmilta kun kehitystoimintaa jatketaan. Tuloksina syntyivät prosessikuvaukset melkein jokaiseen työvaiheeseen. Tämän lisäksi prosessikuvausten yhteydessä syntyneitä kehitysehdotuksia voidaan pitää tuloksina. Ensimmäinen kehitysprojekteista oli työmääräimen kehittäminen. Työmääräintä muutettiin informatiivisemmaksi, mutta muu parantaminen jäi diplomityön ulkopuolelle. Toinen kehitysprojekti oli varastotuotteiden hallinnan kehittäminen, jossa aloitettiin ennakoida asiakkaan tilauksia ja varastojen arvot saatiin paremmin hallintaan. Tuloksia saavutetaan enemmän, mikäli toimintaa laajennetaan. Viimeisenä kehitysprojektina oli työpisteen toiminnan kehittäminen. Kehittämisessä keskityttiin pohjapiirroksen järkevöittämiseen, työtapojen vakiointiin ja lean-työkalu 5S toteutukseen. Työpisteen tehokkuutta saatiin nostettua jonkun verran, tosin painopiste oli uuden toimintatavan oppimisessa.

Sosiaaliset mediat sisäisessä viestinnässä

Tässä kandidaatintyössä käsitellään sosiaalista mediaa yritysten sisäisessä viestinnässä. Määritellään mitä sosiaalinen media on, tutkitaan sen käyttäjäryhmiä ja luokkia, tutustutaan Web 2.0 käsitteeseen, esitellään verkostopalveluita ja verrataan näitä kaikki perinteisiin medioihin. Johtopäätöksissä tuodaan esille sosiaalisen median luonnetta, käyttökohteita yrityksessä, parhaita sovelluksia sekä suositellaan käyttötapoja. Lopuksi työssä käsitellään sosiaalisen median käytön ongelmia ja niiden ratkaisuja.

Algorithmic Solutions for Combinatorial Problems in Resource Management of Manufacturing Environments

This thesis studies the use of heuristic algorithms in a number of combinatorial problems that occur in various resource constrained environments. Such problems occur, for example, in manufacturing, where a restricted number of resources (tools, machines, feeder slots) are needed to perform some operations. Many of these problems turn out to be computationally intractable, and heuristic algorithms are used to provide efficient, yet sub-optimal solutions. The main goal of the present study is to build upon existing methods to create new heuristics that provide improved solutions for some of these problems. All of these problems occur in practice, and one of the motivations of our study was the request for improvements from industrial sources. We approach three different resource constrained problems. The first is the tool switching and loading problem, and occurs especially in the assembly of printed circuit boards. This problem has to be solved when an efficient, yet small primary storage is used to access resources (tools) from a less efficient (but unlimited) secondary storage area. We study various forms of the problem and provide improved heuristics for its solution. Second, the nozzle assignment problem is concerned with selecting a suitable set of vacuum nozzles for the arms of a robotic assembly machine. It turns out that this is a specialized formulation of the MINMAX resource allocation formulation of the apportionment problem and it can be solved efficiently and optimally. We construct an exact algorithm specialized for the nozzle selection and provide a proof of its optimality. Third, the problem of feeder assignment and component tape construction occurs when electronic components are inserted and certain component types cause tape movement delays that can significantly impact the efficiency of printed circuit board assembly. Here, careful selection of component slots in the feeder improves the tape movement speed. We provide a formal proof that this problem is of the same complexity as the turnpike problem (a well studied geometric optimization problem), and provide a heuristic algorithm for this problem.

Absorptive capacity of Multinational Corporation’s parent company

The objective of this paper is to contribute to the literature concerning absorptive capacity by revealing the factors affecting the absorptive capacity of MNC parent company toward subsidiary and most particularly the effects of intra-organizational antecedents. The theoretical framework is build around previous findings on knowledge sharing and absorptive capacity. The empirical part of the study is a qualitative research which includes in-depth interviews and analysis of secondary data based on a single case company. The results showed that organizational structure, internal communication, informal networks, formal networks, internationalization, human resources management, shared language, meetings, trust, participation in decision-making, level of awareness, IT system, level of adaptation to market specifications and job rotation influence parent company’s absorptive capacity. Moreover, related problems to these antecedents have been identified. Additionally, recommendations to solve these problems are formulated. In the end, directions for future research on this topic are given.

Solving Challenging Real-World Scheduling Problems

This work contains a series of studies on the optimization of three real-world scheduling problems, school timetabling, sports scheduling and staff scheduling. These challenging problems are solved to customer satisfaction using the proposed PEAST algorithm. The customer satisfaction refers to the fact that implementations of the algorithm are in industry use. The PEAST algorithm is a product of long-term research and development. The first version of it was introduced in 1998. This thesis is a result of a five-year development of the algorithm. One of the most valuable characteristics of the algorithm has proven to be the ability to solve a wide range of scheduling problems. It is likely that it can be tuned to tackle also a range of other combinatorial problems. The algorithm uses features from numerous different metaheuristics which is the main reason for its success. In addition, the implementation of the algorithm is fast enough for real-world use.

Suunnittelutoimistot mukana asiakkaiden tuotekehitysprosesseissa

The goal for this study was to examine how engineering companies could take part in their customers’ product development to a larger extent than just provide their traditional knowhow – product design. Additionally, co-operation possibilities, challenges and problems in product development were examined. In the end the target was to find out if there would be any opportunities for engineering companies’ own product development. The study was launched by analyzing the present market situation of engineering and consultancy services sector. Next step was to examine different phases of the product development process. The study of the product development co-operation began by analyzing different forms of the business co-operation. Possibilities and challenges of the product development cooperation were searched from literature and already existing studies. Afterwards ten persons from nine industrial sectors’ customer companies were interviewed. The outcome of the research shows that engineering companies could have possibilities to expand their services also to the other phases of the product development than just product design. Customer enterprises tend to consider the beginning of the product development process as their internal activity, but engineering companies could enlarge their services to cover also the product implementation phase. What was important at the beginning of the co-operation was to inspire confidence between two companies, but later confidence became person related. Engineering companies’ own product development was provided with plenty of new ideas and ways of making money by interviewees.

Lappeenrannan seudun opiskelija-asuntosäätiön sähköisten palveluiden käytettävyyden ja vaikuttavuuden kehittäminen

Sähköiset palvelut ovat tulleet keskeiseksi osaksi Lappeenrannan seudun opiskelija-asuntosäätiön (LOAS) sisäistä ja ulkoista tiedottamista. Tiedon nopea saatavuus ja yksinkertainen käytettävyys ovat avainasemassa kehitettäessä uusia järjestelmiä. Uuden sukupolven käyttäjät ovat tottuneet tiedon saatavuuden helppouteen, joten tiedon tulee olla selkeästi esillä ja siihen on päästävä käsiksi nopeasti. Diplomityön tavoitteena oli tutkia ja kehittää LOAS:n sisäisiä ja ulospäin asiakkaille tarjottavia sähköisiä palveluita. Kehitettävät palvelut olivat intranet, Internet-sivut ja Maestro Opas-asiakashallinta. LOAS:n palvelut on hajautettu usean eri ohjelman välille, joten se aiheuttaa ongelmia informaation siirrossa järjestelmien välillä. Työssä sähköisten palveluiden käytettävyyttä parannettiin lyhentämällä polkuja ja koostamalla palveluita kokonaisuuksiksi. Työn lopputuloksena LOAS:llä on käytössään yksinkertaisemmat Internet-sivut ja selkeämpi intranet-näkymä. Palveluiden käytettävyyden ja vaikuttavuuden arviointi suoritettiin itsenäisenä perehtymisenä ongelmakohtiin ja henkilöhaastatteluina. Haastatteluilla kartoitettiin käyttäjien palvelun tarpeita, jonka avulla kehitettävät kohteet pystyttiin määrittelemään. Palveluiden käytettävyyttä parantamalla asukkaita pyritään ohjaamaan tarjottavien palveluiden piiriin. Tällöin asukkaille tarjottavien palveluiden laatua pystytään parantamaan. LOAS:n tulisi kuitenkin tarkastella erilaisia ratkaisuja toimintojen yhdistämiseen. Tämän avulla asukkaiden kaikki liikkuminen pystyttäisiin käsittelemään yhden ohjelman avulla.

Internal ambience of bee colonies submitted to strengthening management by adding broods

This study aimed to investigate the ideal brood area to be introduced for strengthening Apis mellifera colonies, considering variations in the hive's internal ambience. Therefore, eight colonies were equipped with data loggers for recording variations in temperature and humidity inside the hives. Then, these colonies were split in four treatments involving the swapping of four, three, two and one brood comb between strong and weak colonies. Growth in the amount of brood and food stores to the four colony strengthening treatments was assessed counting the comb cells to record changes in the brood and food area. The colonies tended to restore their normal thermoregulation within four hours after they had been manipulated and the hive cover had been closed, which quickly increased brood area in the receiving colonies. Results showed that adding up to three brood combs constitute an important alternative for strengthening Apis mellifera colonies because it did not interfere with nest thermoregulation, speeded up population growth in weak colonies and did not affect the development of strong colonies.