Structuration and branding of a religious tourism product: Catalonia sacra

This article aims to provide an overview of the products Catalonia has to offer in terms of religious tourism. The growing interest in this kind of tourism worldwide, and in Catalonia itself, along with the region's wealth of religious heritage (particularly connected to the Christian Church) contrast with the lack of religion-based tourism products available, which results in its absence from the region's image as a tourism destination. In view of this, the Faculty of Tourism (University of Girona), the Vic Bishopric's Albergueria-Centre for Cultural Dissemination and the Tarraconense Episcopal Conference's Interdiocese Secretariat for the Custody and Promotion of Holy Art (SICPAS) decided to address the situation with the help of funding from the Autonomous Government of Catalonia. In order to re-position Christian religious heritage in the image of Catalonia as a tourist destination, the aforementioned parties embarked upon a project to set up a series of routes throughout the region, branded under the name Catalonia Sacra

Improving Evaluation and Development Capability in Verification and Validation

Validation and verification operations encounter various challenges in product development process. Requirements for increasing the development cycle pace set new requests for component development process. Verification and validation usually represent the largest activities, up to 40 50 % of R&D resources utilized. This research studies validation and verification as part of case company's component development process. The target is to define framework that can be used in improvement of the validation and verification capability evaluation and development in display module development projects. Validation and verification definition and background is studied in this research. Additionally, theories such as project management, system, organisational learning and causality is studied. Framework and key findings of this research are presented. Feedback system according of the framework is defined and implemented to the case company. This research is divided to the theory and empirical parts. Theory part is conducted in literature review. Empirical part is done in case study. Constructive methode and design research methode are used in this research A framework for capability evaluation and development was defined and developed as result of this research. Key findings of this study were that double loop learning approach with validation and verification V+ model enables defining a feedback reporting solution. Additional results, some minor changes in validation and verification process were proposed. There are a few concerns expressed on the results on validity and reliability of this study. The most important one was the selected research method and the selected model itself. The final state can be normative, the researcher may set study results before the actual study and in the initial state, the researcher may describe expectations for the study. Finally reliability of this study, and validity of this work are studied.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Centralized Motion Control of a Linear Tooth Belt Drive: Analysis of the Performance and Limitations

A centralized robust position control for an electrical driven tooth belt drive is designed in this doctoral thesis. Both a cascaded control structure and a PID based position controller are discussed. The performance and the limitations of the system are analyzed and design principles for the mechanical structure and the control design are given. These design principles are also suitable for most of the motion control applications, where mechanical resonance frequencies and control loop delays are present. One of the major challenges in the design of a controller for machinery applications is that the values of the parameters in the system model (parameter uncertainty) or the system model it self (non-parametric uncertainty) are seldom known accurately in advance. In this thesis a systematic analysis of the parameter uncertainty of the linear tooth beltdrive model is presented and the effect of the variation of a single parameter on the performance of the total system is shown. The total variation of the model parameters is taken into account in the control design phase using a Quantitative Feedback Theory (QFT). The thesis also introduces a new method to analyze reference feedforward controllers applying the QFT. The performance of the designed controllers is verified by experimentalmeasurements. The measurements confirm the control design principles that are given in this thesis.

Powder flow criteria for design of vertical silo walls

For design of vertical silos walls involving the storage of bulk solids to be safe and reliable, it is important knowing the largest possible number of variables such as: flow properties, silo geometry and pattern of flow desired. In order to validate the theories of flow prediction and design of conical hoppers, the flow properties of two bulk solids were determined, the theories of Jenike's flowability and Enstad and Walker for hopper design were analyzed and the results were compared with those experimentally obtained in a reduced model of a semicircular-section silo. Results show that Enstad theory for the hopper design is adequate to occur mass flow inside the silo, and for the sizing of the discharge outlet, the Walker's theory was closer to the appropriate than Jenike's theory, which was higher around 100% than the experimental hopper outlet.

Suomen Ilmavoimien johtamisjärjestelmän evoluutio ilmasotateorian, kansallisten instituutioiden ja johtamisjärjestelmän ulkomaisen kehityksen näkökulmasta

Ilmavoimien johtamisjärjestelmä on osa Ilmavoimien järjestelmäkokonaisuutta, jonka kaksi muuta osaa ovat taistelujärjestelmä ja tukeutumisjärjestelmä. Ilmavoimien materiaalista suorituskykyä rakennetaan tämän järjestelmäajattelun pohjalta. tässä tutkimuksessa Ilmavoimien johtamisjärjestelmää tutkitaan kolmen kokonaisuuden, ilmavalvontajärjestelmän, ilmatilannekuvan muodostamisjärjestelmän ja tulenkäytön johtamisjärjestelmän, näkökulmasta. Ilmavoimien johtamisjärjestelmän laajuuden vuoksi tutkimusaluetta on jouduttu rajaamaan. Tutkimus perustuu evoluutioparadigmaan, jonka mukaisesti kaikki olevainen on evolutionaarista. Mikään tässä ajassa oleva ilmiö ei ole historiaton. Jokaisella ilmiöllä on nykyisyytensä lisäksi historia ja tulevaisuus. Evoluutioparadigman avulla laajennetaan Ilmavoimien johtamisjärjestelmän nykyisyyden ymmärtämistä kuvaamalla ja analysoimalla sen evoluutiota. Tutkimusaineistoa analysoidaan käyttäen hyväksi polkuriippuvuutta evolutionaarisena mallina. tätä mallia on käytetty uusinstitutionaalisessa ja evolutionaarisessa taloustieteessä ja taloushistoriassa tutkittaessa yritysten, toimialojen tai tuotteiden pysyvyyttä markkinoilla sekä erilaisten innovaatioiden vaikuttavuutta menestymiseen eri markkinatilanteissa. Tutkimusasetelman lähtökohtana on Ilmavoimien johtamisjärjestelmäevoluution kuvaaminen kolmen tekijän tasapainoasetelman suhteen, joita ovat instituutiot, ilmasotateoria ja kansainvälinen ilmavoimien johtamisjärjestelmän kehitys. tutkimuksen tavoitteena on löytää institutionaalinen logiikka Ilmavoimien johtamisjärjestelmän evoluutiolle sekä sen eri kehitysprosesseihin liittyvä mahdollinen polkuriippuvuuden logiikka. Tutkittavina instituutioina ovat kansallinen poliittinen päätöksenteko, joka ilmentyy erilaisina komiteamietintöjä, raportteina ja selontekoina. Sotilaallista instituutiota edustavat eri operatiiviset ohjeet, ohjesäännöt ja doktriinit, jotka ovat ohjanneet johtamisjärjestelmäkehitystä. Ilmasotateorian vaikuttavuuden analyysiä varten tutkimuskohteiksi on valittu seitsemän merkittävää ilmasotateoreetikkoa. Kenraalimajuri Giulio douhet, ilmamarsalkka Hugh Trenchard ja kenraalimajuri William Mitchell edustavat ilmasotateorian varhaista kautta. Kansallista ilmasotateorian kehitystä edustavat eversti Richard Lorentz ja kenraalimajuri Gustaf Erik Magnusson. Yhdysvaltalaiset everstit John Boyd ja John Warden III ovat uuden ajan ilmasotateoreetikkoja. Näiden henkilöiden tuottamien teorioiden avulla voidaan piirtää kuva muutoksesta, jota ilmasodankäynnin teoreetti- sessa ajattelussa on tapahtunut. Ilmavoimien johtamisjärjestelmän evoluutiolle haetaan vertailua kehityksestä, jota on tapahtunut Yhdysvalloissa, Isossa-Britanniassa ja Saksassa. Ilmavoimat on saanut vaikutteita muistakin maista, mutta näiden maiden kehityksen avulla voidaan selittää Suomessa tapahtunutta kehitystä. Tutkimuksessa osoitetaan, että kansainvälisellä johtamisjärjestelmäevoluutiolla on ollut merkittävä vaikutus suomalaiseen kehitykseen. Tämä tutkimus laajentaa prosessuaalista tutkimusteoriaa ja polkuriippuvuusmallin käyttöä sotatieteelliseen tutkimuskenttään. tutkimus yhdistää toisiinsa aivan uudella tavalla sotilasorganisaation institutionaalisia tekijöitä pitkässä evoluutioketjussa. Tutkimus luo pohjaa prosessuaaliseen, havaintoihin perustuvaan evoluutioajatteluun, jossa eri tekijöiden selitysmalleja ja kausaalisuutta eri periodien aikana voidaan kuvata. Tutkimuksen tuloksena ilmavoimien johtamisjärjestelmäevoluutiossa paljastui merkittäviä piirteitä. Teknologia on ollut voimakas katalysaattori ilmapuolustuksen evoluutiossa. Uusien teknologisten innovaatioiden ilmestyminen taistelukentälle on muuttanut oleellisesti taistelun kuvaa. Sodankäynnin revoluutiosta huolimatta sodankäynnin tai operaatiotaidon ja taktiikan perusperiaatteissa ei ole tapahtunut perustavanlaatuista muutosta. Ilmavoimien johtamisjärjestelmän kehitys on voimakkaasti linkittynyt ulkomaiseen johtamisjärjestelmäkehitykseen, jossa teknologiaimplementaatiot perustuvat usean eri ilmiön paljastumiseen ja hyväksikäyttöön. Sotilas- ja siviili-instituutiot ovat merkittävästi vaikuttaneet Ilmavoimien johtamisjärjestelmän kansalliseen kehitykseen. Ne ovat antaneet poliittisen ohjauksen, taloudellisten resurssien ja strategis-operatiivisten käskyjen ja suunnitelmien avulla perusteet, joiden pohjalta johtamisjärjestelmää on kehitetty. Tutkimus osoittaa, että Suomen taloudellisten resurssien rajallisuus on ollut merkittävin institutionaalinen rajoite Ilmavoimien johtamisjärjestelmää kehitettäessä. Useat poliittiset ohjausasiakirjat ovat korostaneet, ettei Suomella pienenä kansakuntana ole taloudellisia resursseja seurata kansainvälistä sotilasteknologiakehitystä. Lisäksi ulko- ja turvallisuuspoliittinen liikkumavapaus on vaikuttanut kehittämismahdollisuuksiin. Ilmasotateorian evoluutio on luonut johtamisjärjestelmän kehitykselle välttämättömän konseptuaalisen viitekehyksen, jotta ilmasota on voitu viedä käytännön tasolle. Teoria, doktriini ja instituutiot toimivat vuorovaikutuksessa, jossa ne interaktiivisesti vaikuttavat toinen toisiinsa. Tutkimus paljasti kuusi merkittävää sokkia, jotka saivat aikaan radikaaleja muutoksia johtamisjärjestelmän evoluutiopolulla. tutkimuksen perusteella vaikuttavimmat muutoksia aiheuttavat sokit olivat radikaalit turvallisuuspoliittiset muutokset kuten sota ja voimakkaat kansantalouden muutokset kuten lama. Sokkeja aiheuttaneet kuusi ajankohtaa olivat: 1. Puolustusvoimien rakentamisen aloittaminen vapaussodan jälkeen 1918 2. Maailmanlaajuinen lama 1929–1933 ja eurooppalainen rauhanaate 1928–1933 3. Talvi- ja jatkosota 1939–1944 4. Uusi alku Pariisin rauhansopimuksen 1947 ja YYA-sopimuksen 1948 varjossa 5. Kylmän sodan päättyminen ja Suomen lama 1990–1993 6. Maailmanlaajuinen lama 2008- Tutkimuksen perusteella voidaan todeta, että Suomen ilmavoimien johtamisjärjestelmän kehittäminen on perustunut rationaalisiin päätöksiin, jotka ovat saaneet vaikutteita ulkomaisesta ilmasotateorian ja -doktriinien kehityksestä sekä kansainvälisestä johtamisjärjestelmäkehityksestä. Johtamisjärjestelmän evoluutioon on vaikuttanut globaali konvergenssi, johon on tehty kansallisen tason ratkaisuja järjestelmien adaptaation ja implementaation yhteydessä.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Evaluation of novel programs in health counseling – their effectiveness in the oral health of young children, and their acceptance by parents and professionals in public dental service.

Aim and design: To evaluate family-based health counseling for young children, and to study the significance of adding parental self-care or the training of professionals to the programs. The effectiveness and acceptability of the programs were evaluated by comparing two new programs with an earlier one. Subjects and methods: The study was carried out in Vantaa, which was divided into three study areas. The subjects consisted of children born in 2008, particularly fi rstborn children, while children born in 2006 formed the historical control. The fi rst of the new programs emphasized oral hygiene and use of fl uoride, and the second program focused on proper diet and use of xylitol. The main outcome measure was mutansstreptococci (MS) in the dental biofi lm of two-year-olds, and the opinions of parents and dental professionals were evaluated using questionnaires. Results: The programs found wide acceptance among dental professionals. There were no group-related differences found in the MS scores of the two-year-olds. However, all groups combined, father’s advanced level of education and child’s proper use of xylitol were associated with negative MS scores. In the opinion of parents, the oral healthcare guidance at least somewhat met their expectations. Conclusions: The present fi ndings suggest that providing training and support for professionals in health education is important. The addition of parental self-care to supplement programs aimed at young children does not improve the program, although it may improve parental readiness to change their own health habits. Counseling for families might be best carried out through a routine patient-centered program.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.

On the Beautiful and the Ugly

Classical aesthetics sees the experience of the beautiful as an anthropological necessity. But, in fact, the beautiful is rather the central category designating classical art, and one can question the relevance of this category considering contemporary art. The reference term most frequently used for contemporary art is interesting: works of art solicit the interests of my faculties (the cognitive-intellectual, the pragmatic community-oriented moral, the affective aesthetic faculties). It is interesting to notice that the categories of the beautiful and the ugly have an axiological-moral value. It looks as if the qualities of contemporary art works are judged according to the intensity of the impact on the interests of our faculties. It reveals important, in this respect, to distinguish the ugly from the sublime and the monstrous. Kant’s Third Critique is of some importance in defining these categories.

Financial working capital - management and measurement

Unexpected changes in cash flow have started to occur more frequently after the financial crisis. The capital structures of companies have also changed, and financial flexibility as well as flexible asset management have therefore become more important. This thesis aims at presenting financial working capital management, a part of flexible asset management, as a possibility to gain financial flexibility and survive the changes. This thesis operates in the interface of corporate finance, strategic management and management accounting, and it has two main objectives: to examine financial working capital management and to develop measures of financial working capital. The research in this thesis has been conducted using archival research and design science. Qualitative comparative analysis and model building are used to formulate tools and strategies for financial working capital management. The tools are tested with simulations, case studies and statistical analysis. The empirical data is collected from companies listed in the Helsinki Stock Exchange. The results of this thesis indicate that there are several possible financial working capital management strategies. FOCAL matrix is created in the thesis to assist in the selection of a strategy. The results also imply that profitability can be improved by reducing financial working capital, which creates a need to change the financial working capital management strategy. Financial flow cycle, and its modification, is developed in this thesis to measure financial working capital. Financial working capital as a concept is presented in this thesis with an orientation towards the management view. New dimensions have also been produced to financial management and working capital management, while providing a holistic approach to financial flexibility. Financial working capital management strategies are presented to managers and practical tools are provided for decision-making.

Probing MST1 Kinase Sequence and Structure for Rational Drug Discovery (Targeting diabetes by blocking protein-protein interactions)

Apoptotic beta cell death is an underlying cause majorly for type I and to a lesser extent for type II diabetes. Recently, MST1 kinase was identified as a key apoptotic agent in diabetic condition. In this study, I have examined MST1 and closely related kinases namely, MST2, MST3 and MST4, aiming to tackle diabetes by exploring ways to selectively block MST1 kinase activity. The first investigation was directed towards evaluating possibilities of selectively blocking the ATP binding site of MST1 kinase that is essential for the activity of the enzymes. Structure and sequence analyses of this site however revealed a near absolute conservation between the MSTs and very few changes with other kinases. The observed residue variations also displayed similar physicochemical properties making it hard for selective inhibition of the enzyme. Second, possibilities for allosteric inhibition of the enzyme were evaluated. Analysis of the recognized allosteric site also posed the same problem as the MSTs shared almost all of the same residues. The third analysis was made on the SARAH domain, which is required for the dimerization and activation of MST1 and MST2 kinases. MST3 and MST4 lack this domain, hence selectivity against these two kinases can be achieved. Other proteins with SARAH domains such as the RASSF proteins were also examined. Their interaction with the MST1 SARAH domain were evaluated to mimic their binding pattern and design a peptide inhibitor that interferes with MST1 SARAH dimerization. In molecular simulations the RASSF5 SARAH domain was shown to strongly interact with the MST1 SARAH domain and possibly preventing MST1 SARAH dimerization. Based on this, the peptidic inhibitor was suggested to be based on the sequence of RASSF5 SARAH domain. Since the MST2 kinase also interacts with RASSF5 SARAH domain, absolute selectivity might not be achieved.

Who expects what from whom? : a gender based study on expectations and secondary school administration

This study is about expectations and aspirations of secondary school teachers. It is an investigation of why some teachers aspire to become administrators and why some teachers do not. My research compares expectations and existing attltudes regarding aspirations toward administration which are held by three distinct groups within the secondary school system: 1) principals/vice-principals, 2) aspiring teachers, and 3) non-aspiring teachers. This study questions why, in the late 60's, secondary school administration is still predominated by men. The conclusions and recommendations were based on interviews with thirty men and women in the Hamilton Secondary School System. In addltion, Mr. Keith Rielly, Superintendent of Operations, made valuable contributions to my work. The interviews revealed experiences and percept ions of men and women in di scourse about f amil y re lat i onshi ps, educational choices and perceived internal and external barriers which inhiblted or enhanced their decision to aspire to secondary school administration. Candidates spoke about their personal and professional Hves wlth respect to encouragement, perceived images of an administrator, netWOrking and the effect of marriage and children on their careers. Historically, women have not accepted the challenge of administration and It would appear as if this is still the case today. My research suggests that women are under-represented in secondary school administration because of internal and external barriers which discourage many women from aspiring. I conclude that many of women's internal barrlers are reinforced by external roadblocks which prevent women from aspiring to secondory school administration. Thus. many women who do not envision a future in educational administration establish priorities outside the general realm of education. I recommend that males and females recognize that women make valuable contributions to educational theory and design based on their experiences which may be "differene from mole experiences. but just as significant. Mole and female representation in secondary school administration represents a balance between attitudes and behaviours which can not be accomplished when an administrative offlce is dominated by on all ma1e or all female staff.

The Art of Resisting Colonial Education

This thesis explores the efforts of discipline and resistance in the Indian Residential School (IRS) system in Canada. The IRS has origins in eighteenth and nineteenth century colonial policies of assimilation. While its goals aimed to transform Aboriginal children into Euro-Canadian adults the system has largely been proven ineffective and highly damaging to First Nation communities. This research discusses the complex connection between colonial curriculum and student resistance within the IRS. The discussion emphasizes students‟ abilities to creatively subvert disciplinary tactics and the methods of resistance used in the IRS context - with a focus on art and cultural persistence. It highlights a complicated relationship of disciplinary tactics and student resistance within the context of the IRS focusing on the relationship between curriculum and student product.

Synthesis of unnatural analogues of pancratistatin and narciclasine

Described herein is the chemoenzymatic synthesis of several different types of unnatural analogues of Amaryllidaceae constituents. Development and refinement of existing and design and execution of new approaches towards the synthesis of C-1 analogues of pancratistatin and A-ring heterocyclic analogues of narciclasine are discussed. Evaluation of the new analogues as cancer growth inhibitory agents is also described