Uncertainty budget in the measurement of typical airborne number, surface area and mass particle distributions

The effects of particulate matter on environment and public health have been widely studied in recent years. A number of studies in the medical field have tried to identify the specific effect on human health of particulate exposure, but agreement amongst these studies on the relative importance of the particles’ size and its origin with respect to health effects is still lacking. Nevertheless, air quality standards are moving, as the epidemiological attention, towards greater focus on the smaller particles. Current air quality standards only regulate the mass of particulate matter less than 10 μm in aerodynamic diameter (PM10) and less than 2.5 μm (PM2.5). The most reliable method used in measuring Total Suspended Particles (TSP), PM10, PM2.5 and PM1 is the gravimetric method since it directly measures PM concentration, guaranteeing an effective traceability to international standards. This technique however, neglects the possibility to correlate short term intra-day variations of atmospheric parameters that can influence ambient particle concentration and size distribution (emission strengths of particle sources, temperature, relative humidity, wind direction and speed and mixing height) as well as human activity patterns that may also vary over time periods considerably shorter than 24 hours. A continuous method to measure the number size distribution and total number concentration in the range 0.014 – 20 μm is the tandem system constituted by a Scanning Mobility Particle Sizer (SMPS) and an Aerodynamic Particle Sizer (APS). In this paper, an uncertainty budget model of the measurement of airborne particle number, surface area and mass size distributions is proposed and applied for several typical aerosol size distributions. The estimation of such an uncertainty budget presents several difficulties due to i) the complexity of the measurement chain, ii) the fact that SMPS and APS can properly guarantee the traceability to the International System of Measurements only in terms of number concentration. In fact, the surface area and mass concentration must be estimated on the basis of separately determined average density and particle morphology. Keywords: SMPS-APS tandem system, gravimetric reference method, uncertainty budget, ultrafine particles.

Cough-generated aerosols of Pseudomonas aeruginosa and other Gram Negative Bacteria from cystic fibrosis patients.

Background: Pseudomonas aeruginosa is the most common bacterial pathogen in cystic fibrosis (CF) patients. Current infection control guidelines aim to prevent transmission via contact and respiratory droplet routes and do not consider the possibility of airborne transmission. We hypothesized that with coughing, CF subjects produce viable, respirable bacterial aerosols. Methods: Cross-sectional study of 15 children and 13 adults with CF, 26 chronically infected with P. aeruginosa. A cough aerosol sampling system enabled fractioning of respiratory particles of different size, and culture of viable Gram negative non-fermentative bacteria. We collected cough aerosols during 5 minutes voluntary coughing and during a sputum induction procedure when tolerated. Standardized quantitative culture and genotyping techniques were used. Results: P. aeruginosa was isolated in cough aerosols of 25 (89%) subjects of whom 22 produced sputum samples. P. aeruginosa from sputum and paired cough aerosols were indistinguishable by molecular typing. In 4 cases the same genotype was isolated from ambient room air. Approximately 70% of viable aerosols collected during voluntary coughing were of particles ≤ 3.3 microns aerodynamic diameter. P. aeruginosa, Burkholderia cenocepacia Stenotrophomonas maltophilia and Achromobacter xylosoxidans were cultivated from respiratory particles in this size range. Positive room air samples were associated with high total counts in cough aerosols (P=0.003). The magnitude of cough aerosols were associated with higher FEV1 (r=0.45, P=0.02) and higher quantitative sputum culture results (r=0.58, P=0.008). Conclusion: During coughing, CF patients produce viable aerosols of P. aeruginosa and other Gram negative bacteria of respirable size range, suggesting the potential for airborne transmission.

The susceptibility of digital signatures to fraud in the National Electronic Conveyancing System : an analysis

Public key cryptography, and with it,the ability to compute digital signatures, have made it possible for electronic commerce to flourish. It is thus unsurprising that the proposed Australian NECS will also utilise digital signatures in its system so as to provide a fully automated process from the creation of electronic land title instrument to the digital signing, and electronic lodgment of these instruments. This necessitates an analysis of the fraud risks raised by the usage of digital signatures because a compromise of the integrity of digital signatures will lead to a compromise of the Torrens system itself. This article will show that digital signatures may in fact offer greater security against fraud than handwritten signatures; but to achieve this, digital signatures require an infrastructure whereby each component is properly implemented and managed.

Evidence-based decision making to strengthen local governance : nutritional health interventions in Bantul and Gunungkidul

Since 2001, district governments have had the main responsibility for providing public health care in Indonesia. One of the main public health challenges facing many district governments is improving nutritional standards, particularly among poorer segments of the population. Developing effective policies and strategies for improving nutrition requires a multi-sectoral approach encompassing agricultural development policy, access to markets, food security (storage) programs, provision of public health facilities, and promotion of public awareness of nutritional health. This implies a strong need for a coordinated approach involving multiple government agencies at the district level. Due to diverse economic, agricultural, and infrastructure conditions across the country, district governments’ ought to be better placed than central government both to identify areas of greatest need for public nutrition interventions, and devise policies that reflect local characteristics. However, in the two districts observed in this study—Bantul and Gunungkidul—it was clear that local government capacity to generate, obtain and integrate evidence about local conditions into the policy-making process was still limited. In both districts, decision-makers tended to rely more on intuition,anecdote, and precedent in formulating policy. The potential for evidence-based decision making was also severely constrained by a lack of coordination and communication between agencies, and current arrangements related to central government fiscal transfers, which compel local governments to allocate funding to centrally determined programs and priorities.

Evidence based decision making to strenghten local governance : nutritional health interventions

Since 2001, district governments have had the main responsibility for providing public health care in Indonesia. One of the main public health challenges facing many district governments is improving nutritional standards, particularly among poorer segments of the population. Developing effective policies and strategies for improving nutrition requires a multi-sectoral approach encompassing agricultural development policy, access to markets, food security (storage) programs, provision of public health facilities, and promotion of public awareness of nutritional health. This implies a strong need for a coordinated approach involving multiple government agencies at the district level. Due to diverse economic, agricultural,and infrastructure conditions across the country, district governments’ ought to be better placed than central government both to identify areas of greatest need for public nutrition interventions, and devise policies that reflect local characteristics. However, in the two districts observed in this study—Bantul and Gunungkidul—it was clear that local government capacity to generate, obtain and integrate evidence about local conditions into the policy-making process was still limited. In both districts, decision-makers tended to rely more on intuition,anecdote, and precedent in formulating policy. The potential for evidence-based decision making was also severely constrained by a lack of coordination and communication between agencies, and current arrangements related to central government fiscal transfers, which compel local governments to allocate funding to centrally determined programs and priorities.

Ultrafine particles in indoor air of a school : possible role of secondary organic aerosols

The aim of this work was to investigate ultrafine particles (< 0.1 μm) in primary school classrooms, in relation to the classrooms activities. The investigations were conducted in three classrooms during two measuring campaigns, which together encompassed a period of 60 days. Initial investigations showed that under the normal operating conditions of the school there were many occasions in all three classrooms where indoor particle concentrations increased significantly compared to outdoor levels. By far the highest increases in the classroom resulted from art activities (painting, gluing and drawing), at times reaching over 1.4 x 105 particle cm-3. The indoor particle concentrations exceeded outdoor concentrations by approximately one order of magnitude, with a count median diameter ranging from 20-50 nm. Significant increases also occurred during cleaning activities, when detergents were used. GC-MS analysis conducted on 4 samples randomly selected from about 30 different paints and glues, as well as the detergent used in the school, showed that d-limonene was one of the main organic compounds of the detergent, however, it was not detected in the samples of the paints and the glue. Controlled experiments showed that this monoterpene, emitted from the detergent, reacted with O3 (at outdoor ambient concentrations ranging from 0.06-0.08ppm) and formed secondary organic aerosols. Further investigations to identify other liquids which may be potential sources of the precursors of secondary organic aerosols, were outside the scope of this project, however, it is expected that the problem identified by this study could be more widely spread, since most primary schools use liquid materials for art classes, and all schools use detergents for cleaning. Further studies are therefore recommended to better understand this phenomenon and also to minimize school children exposure to ultrafine particles from these indoor sources.

Using resilience to reconceptualise child protection workforce capacity

Current approaches to managing and supporting staff and addressing turnover in child protection predominantly rely on deficit-based models that focus on limitations, shortcomings, and psychopathology. This article explores an alternative approach, drawing on models of resilience, which is an emerging field linked to trauma and adversity. To date, the concept of resilience has seen limited application to staff and employment issues. In child protection, staff typically face a range of adverse and traumatic experiences that have flow-on implications, creating difficulties for staff recruitment and retention and reduced service quality. This article commences with discussion of the multifactorial influences of the troubled state of contemporary child protection systems on staffing problems. Links between these and difficulties with the predominant deficit models are then considered. The article concludes with a discussion of the relevance and utility of resilience models in developing alternative approaches to child protection staffing issues.

Motorcycle rider protective apparel wearing : observational study results from the Brisbane and Canberra regions

The continued growth in popularity of motorcycling is an area of concern within the road safety domain due to the vulnerability of motorcyclists sustaining injury in the event of a crash. Currently in Australia only motorcycle helmets are mandatory for motorcyclists or pillions to wear and there is no legislative standard for other protective apparel. This paper reports the results obtained from a series of motorcyclists’ apparel observational studies undertaken in the Brisbane and Canberra regions. The sites selected for the research were designed to enable the observation of both recreational and commuter riders. The results highlight both similarities and differences in the type of protective apparel worn by motorcyclists and pillions observed across the two regions. Encouragingly, across all the sites the majority of riders were wearing protective apparel on their upper body. However, a lower proportion of riders were observed wearing protective apparel on their lower body, particularly at the commuter sites in Brisbane. Similarly, the wearing of full face helmets was very high, except at the commuter sites in Brisbane. The generally lower use of protective apparel among commuter riders in Brisbane would appear to reflect both situational factors, such as climate, and the higher proportion of scooters observed at the sites. The implications of these results are discussed and recommendations are made for future research to identify factors that influence the wearing of protective motorcycle apparel.

Unionization : a necessary strategy to arrest professional decline?

This article examines contemporary social work and why it is under serious threat, ideologically and economically, in a rapidly changing world that no longer highly values its social mandate, methods, and outcomes. Within this hostile environment we investigate the low salaries and high student debt that beginning social workers experience, which might otherwise drive them into unions. Instead, the profession resists unionization, preferring to remain focused on its ideals rather than the disquieting marketplace realities. We then examine the general elements of a hybrid union model that can assist social workers to organize and thus arrest their long-standing professional and fiscal decline.

Frameworks in regulating company directors : rethinking the philosophical foundations to enhance accountability

Sets out a system of corporate governance regulation, aimed at combining legal and social methods of governing director behaviour and at creating a framework flexible enough to accommodate different business and ethical cultures. Outlines the theoretical basis of corporate governance and the broad responsibilities of directors, and discusses the extent to which they can and should be regulated. Discusses the constitution of a regulatory framework encompassing law, soft law and best practice, and ethics.

Science and subjectivity

Science has been under attack in the last thirty years, and recently a number of prominent scientists have been busy fighting back. Here, an argument is presented that the `science wars' stem from an unreasonably strict adherence to the reductive method on the part of science, but that weakening this stance need not imply a lapse into subjectivity. One possible method for formalising the description of non-separable, contextually dependent complex systems is presented. This is based upon a quantum-like approach.

Designing the Future

While there have been improvements in Australian engineering education since the 1990s, there are still strong concerns that more progress needs to be made, particularly in the areas of developing graduate competencies and in outcomes-based curricula. This paper reports on the findings from a two-day ALTC-funded forum that sought to establish a shared understanding with the 3 stakeholders (students, academics and industry) about how to achieve a design-based engineering curriculum. This paper reports on the findings from the first day’s activities and reveals that there is a shared desire for design and project-based curricula that would encourage the development of the ‘three-dimensional’ graduate: one who has technical, personal and professional and systems-thinking/design-based competence.

Graduate Attribute Mapping With the Extended CDIO Framework

The CDIO (Conceive-Design-Implement-Operate) Initiative has been globally recognised as an enabler for engineering education reform. With the CDIO process, the CDIO Standards and the CDIO Syllabus, many scholarly contributions have been made around cultural change, curriculum reform and learning environments. In the Australasian region, reform is gaining significant momentum within the engineering education community, the profession, and higher education institutions. This paper presents the CDIO Syllabus cast into the Australian context by mapping it to the Engineers Australia Graduate Attributes, the Washington Accord Graduate Attributes and the Queensland University of Technology Graduate Capabilities. Furthermore, in recognition that many secondary schools and technical training institutions offer introductory engineering technology subjects, this paper presents an extended self-rating framework suited for recognising developing levels of proficiency at a preparatory level. A demonstrator mapping tool has been created to demonstrate the application of this extended graduate attribute mapping framework as a precursor to an integrated curriculum information model.

Addressing Challenges for Internationalisation and Mobility in Engineering Through CDIO Standards

There is a growing need for international transparency of engineering qualifications, and mechanisms to support and facilitate student mobility. In response, there are a number of global initiatives attempting to address these needs, particularly in Europe, North America and Australia. The Conceive-Design-Implement-Operate (CDIO) Initiative has a set of standards, competencies, and proficiency levels developed through a global community of practice. It is a well-structured framework in which best-practice internationalisation and student mobility can be embedded. However, the current 12 CDIO Standards do not address international qualifications or student mobility. Based on an environmental scan of global activities, the underpinning principles of best practice are identified and form the basis of the proposed 13th CDIO Standard — “Internationalization and Mobility”.