Electromagnetically induced negative refractive index in a V-type four-level atomic system

We propose a scheme for realizing negative refractive index in a V-type four-level atomic system. It is shown that the negative refractive index can be achieved in a wide frequency band based on the effect of quantum coherence. It is also found that the frequency band of negative refractive index and the absorption property of left-handed material are manipulated by the pump and control fields. Furthermore, left-handed material with reduced absorption is possible by choosing appropriate parameters. (c) 2006 Elsevier B.V. All rights reserved.

The origin of the transverse relaxation time in optically excited semiconductor quantum wells

The origin of the transverse relaxation time in optically excited semiconductor quantum wells is investigated based on the vector property of the interband transition matrix elements. The dephasing rate due to carrier-carrier (CC) scattering is found to be equal to half of the common momentum relaxation rate. The analytical expression of the polarization dephasing due to CC scattering in two-dimension is established and the dependence of the dephasing rate Gamma(cc) on the carrier density N is determined to be Gamma(cc) = constant (.) N-1/2, which is used to explain the experimental results and provides a promising physical picture. (C) 2004 Elsevier B.V. All rights reserved.

A mathematical and experimental investigation of microcycle spectral estimates of semiconductor flicker noise

The experimental portion of this thesis tries to estimate the density of the power spectrum of very low frequency semiconductor noise, from 10^-6.3 cps to 1. cps with a greater accuracy than that achieved in previous similar attempts: it is concluded that the spectrum is 1/f^α with α approximately 1.3 over most of the frequency range, but appearing to have a value of about 1 in the lowest decade. The noise sources are, among others, the first stage circuits of a grounded input silicon epitaxial operational amplifier. This thesis also investigates a peculiar form of stationarity which seems to distinguish flicker noise from other semiconductor noise.

In order to decrease by an order of magnitude the pernicious effects of temperature drifts, semiconductor "aging", and possible mechanical failures associated with prolonged periods of data taking, 10 independent noise sources were time-multiplexed and their spectral estimates were subsequently averaged. If the sources have similar spectra, it is demonstrated that this reduces the necessary data-taking time by a factor of 10 for a given accuracy.

In view of the measured high temperature sensitivity of the noise sources, it was necessary to combine the passive attenuation of a special-material container with active control. The noise sources were placed in a copper-epoxy container of high heat capacity and medium heat conductivity, and that container was immersed in a temperature controlled circulating ethylene-glycol bath.

Other spectra of interest, estimated from data taken concurrently with the semiconductor noise data were the spectra of the bath's controlled temperature, the semiconductor surface temperature, and the power supply voltage amplitude fluctuations. A brief description of the equipment constructed to obtain the aforementioned data is included.

The analytical portion of this work is concerned with the following questions: what is the best final spectral density estimate given 10 statistically independent ones of varying quality and magnitude? How can the Blackman and Tukey algorithm which is used for spectral estimation in this work be improved upon? How can non-equidistant sampling reduce data processing cost? Should one try to remove common trands shared by supposedly statistically independent noise sources and, if so, what are the mathematical difficulties involved? What is a physically plausible mathematical model that can account for flicker noise and what are the mathematical implications on its statistical properties? Finally, the variance of the spectral estimate obtained through the Blackman/Tukey algorithm is analyzed in greater detail; the variance is shown to diverge for α ≥ 1 in an assumed power spectrum of k/|f|^α, unless the assumed spectrum is "truncated".

As garantias do processo do trabalho

Este trabalho se propõe a uma releitura da atual concepção do Direito Processual do Trabalho, seus institutos, princípios e regras. A partir da constatação da autonomia do processo do trabalho e da inaptidão de seus mecanismos para a realização dos direitos materiais subjacentes, passam a ser diagnosticados fatores que o distanciam dos valores constitucionais e das garantias processuais fundamentais reconhecidas nos textos supranacionais, para a construção de principiologia própria e coerente com a Teoria Geral do Processo. Destacadas as seis garantias processuais fundamentais, quais sejam (i) tribunal competente; (ii) acesso à justiça; (iii) órgão julgador imparcial; (iv) ampla possibilidade de participação no processo; (v) prazo razoável e (vi) efetividade da decisão, cada uma passa a ser apresentada inicialmente sob uma ótica abstrata e geral, para, em seguida, serem considerados os pontos em que se chocam com as práticas processuais trabalhistas. Sobre tais premissas são desenvolvidas teses em prol da construção de um justo processo do trabalho.

Efficacy and safety of autologous platelet rich plasma for the treatment of vascular ulcers in primary care: Phase III study

Background: Vascular ulcers are commonly seen in daily practice at all levels of care and have great impact at personal, professional and social levels with a high cost in terms of human and material resources. Given that the application of autologous platelet rich plasma has been shown to decrease healing times in various different studies in the hospital setting, we considered that it would be interesting to assess the efficacy and feasibility of this treatment in primary care. The objectives of this study are to assess the potential efficacy and safety of autologous platelet rich plasma for the treatment of venous ulcers compared to the conventional treatment (moist wound care) in primary care patients with chronic venous insufficiency (C, clinical class, E, aetiology, A, anatomy and P, pathophysiology classification C6). Design: We will conduct a phase III, open-label, parallel-group, multicentre, randomized study. The subjects will be 150 patients aged between 40 and 100 years of age with an at least 2-month history of a vascular venous ulcer assigned to ten primary care centres. For the treatment with autologous platelet rich plasma, all the following tasks will be performed in the primary care setting: blood collection, centrifugation, separation of platelet rich plasma, activation of coagulation adding calcium chloride and application of the PRP topically after gelification. The control group will receive standard moist wound care. The outcome variables to be measured at baseline, and at weeks 5 and 9 later include: reduction in the ulcer area, Chronic Venous Insufficiency Quality of Life Questionnaire score, and percentage of patients who require wound care only once a week. Discussion: The results of this study will be useful to improve the protocol for using platelet rich plasma in chronic vascular ulcers and to favour wider use of this treatment in primary care.

Charge and spin transport in graphene devices

170 p.

Modelling material transfer in metal rolling using plasticine

Plasticine strips are rolled between cylindrical rollers to model the phenomenon of material transfer in metal rolling. Strips of thin plastic film ('clingfilm') on the plasticine strip are used to model the oxide layer that covers the surface of aluminium. The effect of gaps opening up between the clingfilm strips is investigated. It is found that the percentage area of the exposed strip giving rise to transfer of material increases with the gap width. The evidence strongly suggests that plasticine particles transferred to the rolls are able to pick off plasticine from the strip on successive passes. Larger plasticine particles are more likely to show this behaviour and consequently grow in size. The results confirm the usefulness of plasticine as a suitable material to investigate transfer layer formation in metal rolling, and help inform development of experimental procedures to study the evolution of real metal transfer layers. © 2007 Elsevier B.V. All rights reserved.

High-performance 4H-SiC based metal-semiconductor-metal ultraviolet photodetectors with Al2O3 SiO2 films

4H-silicon carbide (SiC) metal-semiconductor-metal (MSM) ultraviolet (UV) photodetectors with Al2O3/SiO2 (A/S) films employed as antireflection/passivation layers have been demonstrated. The devices showed a peak responsivity of 0.12 A/W at 290 nm and maximum external quantum efficiency of 50% at 280 nm under 20 V electrical bias, which were much larger than conventional MSM detectors. The redshift of peak responsivity and response restriction effect were found and analyzed. The A/S/4H-SiC MSM photodetectors were also shown to possess outstanding features including high UV to visible rejection ratio, large photocurrent, etc. These results demonstrate A/S/4H-SiC photodetectors as a promising candidate for OEIC applications. (C) 2008 American Institute of Physics.

Biocompatibilidade de um material a base de guta-percha autoadesiva (Bio-Gutta)

O objetivo desse trabalho foi avaliar a biocompatibilidade de um material a base de guta-percha autoadesiva (Bio-Gutta) em tecido subcutâneo de camundongos. A guta-percha convencional foi utilizada como referência para comparação. Para isso, foram utilizados 30 camundongos, os quais foram distribuídos aleatoriamente em dois grupos (Bio-Gutta e guta-percha convencional). Os materiais avaliados foram implantados na região dorsal dos camundongos. Após 7, 21 e 63 dias, os animais foram sacrificados e 5 amostras por grupo por tempo experimental foram obtidas. As amostras histológicas foram seccionadas em 5 m de espessura e coradas convencionalmente com hematoxilina e eosina. Um escore de I-IV foi utilizado para graduar a reação inflamatória. O teste U de Mann-Whitney com correção de Bonferroni foi utilizado para análise estatística (p < 0,05). Os resultados mostraram que, após 7 dias, a Bio-Gutta induziu uma reação tecidual de leve a moderada (II) e a guta-percha convencional apresentou uma resposta inflamatória de moderada a intensa (III). Após 21 dias, a Bio-Gutta induziu uma leve reação tecidual (I), enquanto que a guta-percha convencional ainda apresentava uma resposta inflamatória moderada (III). Uma reação tecidual de leve a ausente (I) foi observada na Bio-Gutta após 63 dias, ao passo que na guta-percha convencional observou-se uma resposta inflamatória de leve a moderada (II). Houve diferença significativa na mediana do grau de inflamação entre os grupos em cada tempo experimental (p = 0,005, aos 7 dias; p = 0,011, aos 21 dias; e p = 0,003, aos 63 dias). Concluiu-se então que a Bio-Gutta foi mais biocompatível que a guta-percha convencional em tecido subcutâneo de camundongos apresentando uma boa resposta tecidual.

Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness

Micro-scale abrasion (ball cratering) tests were performed with different combinations of ball and bulk specimen materials, under different test conditions, such as load and abrasive slurry concentration. Wear modes were classified into two types: with rolling particle motion and with grooving particle motion. Wear rates observed with rolling particle motion were relatively insensitive to test conditions, whereas with grooving motion they varied much more. It is suggested that rolling abrasion is therefore a more appropriate mode if reproducible test results are desired. The motion of the abrasive particles can be reliably predicted from the knowledge of hardnesses and elastic properties of the ball and the specimen, and from the normal load and the abrasive slurry concentration. General trends in wear resistance measured in the micro-scale abrasion test with rolling particle motion are similar to those reported in tests with fixed abrasives with sliding particle motion, although the variation in wear resistance with hardness is significantly smaller. © 2004 Published by Elsevier B.V.

Análise da disposição do material dragado no Canal do Fundão e no Canal do Cunha Rio de Janeiro/RJ.

As operações de dragagem e de disposição final do material dragado são indispensáveis para atender as necessidades de implantação e manutenção das vias de transporte aquaviário. Todavia essas operações, dependendo das dragas e equipamentos utilizados, podem causar danos às comunidades marinhas, alterações na batimetria dentre outras coisas. A circulação de águas na região da Baía da Guanabara compreendida entre a Ilha do Fundão e o continente encontra-se prejudicada, em decorrência das baixas profundidades e estrangulamentos existentes. Entretanto, um projeto de dragagem pode causar vários impactos no meio ambiente. Assim se faz necessário que os organismos e empresas responsáveis pelo meio ambiente e pelo desenvolvimento e execução de projetos de dragagem se preocupem em desenvolver diretrizes e procedimentos para o gerenciamento ambiental de tais projetos. Deste modo, objetivo principal deste trabalho é analisar a disposição do material dragado no Canal do Fundão e Canal do Cunha de acordo com a legislação relacionada as atividades de dragagem. Para isso são: i) identificadas a legislação ambiental existente no Brasil e de organismos internacionais que visam à regulamentação do gerenciamento ambiental das atividades de dragagem; ii) classificados os métodos de destinação do material dragado; e iii) analisado o processo de destinação do material dragado no Canal do Fundão e no canal do Cunha.

International legal instruments relevant to fisheries and fishing communities : a handbook. Theme III. Oceans and fisheries management

This handbook provides detailed information for a wide range of legal instruments relevant to fisheries and fishworkers. It covers 114 legal instruments, categorized into the following seven themes: Theme I. Human Rights, Food Security, Women and Development. Theme II. Environment and Sustainable Development. Theme III. Oceans and Fisheries Management. Theme IV. Environmental Pollution Theme V. Fishing Vessels and Safety at Sea Theme VI. Labour Theme VII. Trade The handbook also includes the working of the instruments (decision-making bodies, monitoring and implementation agencies, periodicity of meetings, rules for participation in meetings of the decision-making bodies and implementation agencies for States and non-governmental organizations), regional instrument and agencies. Apart from being a ready reckoner to the instruments, it highlights the important sections of relevance to fisheries or small-scale fisheries and fishworkers. The companion CD-ROM provides the full texts of the instruments in a searchable database. The handbook will be useful for fishworker and non-governmental organizations, and also for researchers and others interested in fisheries issues.

International legal instruments relevant to fisheries and fishing communities : a handbook. Theme V. Fishing vessels and safety at sea

This handbook provides detailed information for a wide range of legal instruments relevant to fisheries and fishworkers. It covers 114 legal instruments, categorized into the following seven themes: Theme I. Human Rights, Food Security, Women and Development. Theme II. Environment and Sustainable Development. Theme III. Oceans and Fisheries Management. Theme IV. Environmental Pollution Theme V. Fishing Vessels and Safety at Sea Theme VI. Labour Theme VII. Trade The handbook also includes the working of the instruments (decision-making bodies, monitoring and implementation agencies, periodicity of meetings, rules for participation in meetings of the decision-making bodies and implementation agencies for States and non-governmental organizations), regional instrument and agencies. Apart from being a ready reckoner to the instruments, it highlights the important sections of relevance to fisheries or small-scale fisheries and fishworkers. The companion CD-ROM provides the full texts of the instruments in a searchable database. The handbook will be useful for fishworker and non-governmental organizations, and also for researchers and others interested in fisheries issues.

Studies on technological problems associated with the processing of cooked frozen prawns. Pt. 1. Preprocess storage conditions of raw material in relation to quality

The chemical and organoleptic properties of prawn held in ice for different days prior to cooking and the changes after freezing and subsequent storage were studied with three different species of prawn viz. Metapenaeus monoceros, Metapenaeus dobsoni and Parapeneopsis stylifera. The optimum period for which the prawn can be kept under ideal conditions of icing prior to cooking has been worked out.