Small State Cultures of Consensus : State Traditions and Consensus-Seeking in the Neo-Corporatist and Neutrality Policies in Post-1945 Austria and Finland

Austria and Finland are persistently referred to as the “success stories” of post-1945 European history. Notwithstanding their different points of departure, in the course of the Cold War both countries portrayed themselves as small and neutral border-states in the world dictated by superpower politics. By the 1970s, both countries frequently ranked at the top end in various international classifications regarding economic development and well-being in society. This trend continues today. The study takes under scrutiny the concept of consensus which figures centrally in the two national narratives of post-1945 success. Given that the two domestic contexts as such only share few direct links with one another and are more obviously different than similar in terms of their geographical location, historical experiences and politico-cultural traditions, the analogies and variations in the anatomies of the post-1945 “cultures of consensus” provide an interesting topic for a historical comparative and cross-national examination. The main research question concerns the identification and analysis of the conceptual and procedural convergence points of the concepts of the state and consensus. The thesis is divided into six main chapters. After the introduction, the second chapter presents the theoretical framework in more detail by focusing on the key concepts of the study – the state and consensus. Chapter two also introduces the comparative historical and cross-national research angles. Chapter three grounds the key concepts of the state and consensus in the historical contexts of Austria and Finland by discussing the state, the nation and democracy in a longer term comparative perspective. The fourth and fifth chapter present case studies on the two policy fields, the “pillars”, upon which the post-1945 Austrian and Finnish cultures of consensus are argued to have rested. Chapter four deals with neo-corporatist features in the economic policy making and chapter five discusses the building up of domestic consensus regarding the key concepts of neutrality policies in the 1950s and 1960s. The study concludes that it was not consensus as such but the strikingly intense preoccupation with the theme of domestic consensus that cross-cut, in a curiously analogous manner, the policy-making processes studied. The main challenge for the post-1945 architects of Austrian and Finnish cultures of consensus was to find strategies and concepts for consensus-building which would be compatible with the principles of democracy. Discussed at the level of procedures, the most important finding of the study concerns the triangular mechanism of coordination, consultation and cooperation that set into motion and facilitated a new type of search for consensus in both post-war societies. In this triangle, the agency of the state was central, though in varying ways. The new conceptions concerning a small state’s position in the Cold War world also prompted cross-nationally perceivable willingness to reconsider inherited concepts and procedures of the state and the nation. At the same time, the ways of understanding the role of the state and its relation to society remained profoundly different in Austria and Finland and this basic difference was in many ways reflected in the concepts and procedures deployed in the search for consensus and management of domestic conflicts. For more detailed information, please consult the author.

Underwater Sustainability of the ``Cassie'' State of Wetting

A rough hydrophobic surface when immersed in water can result in a ``Cassie'' state of wetting in which the water is in contact with both the solid surface and the entrapped air. The sustainability of the entrapped air on such surfaces is important for underwater applications such as reduction of flow resistance in microchannels and drag reduction of submerged bodies such as hydrofoils. We utilize an optical technique based oil total internal reflection of light at the water-air interface to quantify the spatial distribution of trapped air oil such a surface and its variation with immersion time. With this technique, we evaluate the sustainability of the Cassie state on hydrophobic surfaces with four different kinds of textures. The textures studied are regular arrays of pillars, ridges, and holes that were created in silicon by a wet etching technique, and also a texture of random craters that was obtained through electrodischarge machining of aluminum. These surfaces were rendered hydrophobic with a self-assembled layer Of fluorooctyl trichlorosilane. Depending on the texture, the size and shape of the trapped air pockets were found to vary. However, irrespective of the texture, both the size and the number of air pockets were found to decrease with time gradually and eventually disappear, suggesting that the sustainability of the ``Cassie'' state is finite for all the microstructures Studied. This is possibly due to diffusion of air from the trapped air pockets into the water. The time scale for disappearance of air pockets was found to depend on the kind of microstructure and the hydrostatic pressure at the water-air interface. For the surface with a regular array of pillars, the air pockets were found to be in the form of a thin layer perched on top of the pillars with a large lateral extent compared to the spacing between pillars. For other surfaces studied, the air pockets are smaller and are of the same order as the characteristic length scale of the texture. Measurements for the surface with holes indicate that the time for air-pocket disappearance reduces as the hydrostatic pressure is increased.

Representations of the Natural World in Old English Poetry

Review of Representations of the Natural World in Old English Poetry, by Jennifer Neville (Cambridge UP, 1999).

Reforming technology company incentive programs for achieving knowledge-based economic development:a Brazil-Australia comparative study

This doctoral thesis aims to demonstrate the importance of incentives to technology-based firms as a strategy to promote knowledge-based economic development (KBED). To remain competitive, technology-based firms must innovate and seek new markets; therefore, this study aims to propose an incentive model to technology-based firms as a strategy to promote knowledge-based urban development, according to framework described by Yigitcanlar (2011). This is an exploratory and descriptive research with a qualitative approach. Surveys were carried out with national trade associations that represented technology-based firms both in Brazil and Australia. After analysing the surveys, structured interviews were conducted with government representatives, trade associations and businessmen who had used financial support by the federal government. When comparing both countries, the study found the importance of direct incentives through tax incentives, for it is a less bureaucratic, quicker and more direct process for firms. We suggest to include the terms incentives in the framework of knowledge-based urban development, as one of the pillars that contribute to knowledge-based economic development.

Which Narrative? The Case of the Narrative Subject in Fifteenth-Century Altarpieces

The development of the altarpiece towards the end of the late medieval period added a new decorous and conspicuously visual element to the church interior. The altarpiece became the prime location for iconic – i.e. non-narrative – images, but almost from the beginning narrative images were part of the altarpiece in the form of small-scale pictures placed underneath or next to an iconic image in the centre. In the fifteenth century the format of the altarpiece gradually changed, and simultaneously with the development of the unified picture field some new narrative subjects began to appear on the central panel as the main subject of the altarpiece. During the course of the fifteenth century, narrative subjects became increasingly frequent and accepted subjects for altarpieces. In this article I will focus on the problem of the narrative altarpiece, a seeming contradiction of terms. As narrative subjects were transferred from their usual location to the central field of the altarpiece, traditionally reserved for the iconic image, the narrative was included in a new context and expected to assume the function of the altarpiece. How did a narrative image function in this context, and what kind of audience did it serve? Since the questions involved in the issue are complex, I will focus on the biblical narrative of The Visitation as a case study, and use two well-known Florentine altarpieces from the fifteenth century as examples of the interpretative choices open to the viewers of these altarpieces.

The Innocent Pleasure : A Study on Luther's theology of music

The aim of the study is to examine Luther s theology of music from the standpoint of pleasure. The theological assessment of musical pleasure is related to two further questions: the role of emotions in Christianity and the apprehension of beauty. The medieval discussion of these themes is portrayed in the background chapter. Significant traits were: the suspicion felt towards sensuous gratification in music, music as a mathematical discipline, the medieval theory of emotions informed by Stoic apatheia and Platonic-Aristotelian metriopatheia, the notion of beauty as an attribute of God, medieval aesthetics as the aesthetic of proportion and the aesthetic of light and the emergence of the Aristotelian view of science that is based on experience rather than speculation. The treatment of Luther s theology of music is initiated with the notion of gift. Luther says that music is the excellent (or even the best) gift of God. This has sometimes been understood as a mere music-lover s enthusiasm. Luther is, however, not likely to use the word gift loosely. His theology can be depicted as a theology of gift. The Triune God is categorically giving. The notion of gift also includes reciprocity. When we receive the gifts of God, it evokes praise in us. Praising God is predominantly a musical phenomenon. The particular benefit of music in Luther s thought is that it can move human emotions. This emphasis is connected to the overall affectivity of Luther s theology. In contrast to the medieval discussion, Luther ascribes to saints not just emotions but particularly warm and tender affections. The power of music is related to the auditory and vocal character of the Word. Faith comes through hearing the Word that is at once musical and affective perception. Faith is not a mere opinion but the affective trust of the heart. Music can touch the human heart and persuade with its sweetness, like the good news of the Gospel. Music allows us to perceive Luther s theology as a theology of joy and pleasure. Joy is for Luther a gift of the Holy Spirit that fills the heart and bursts out in voice and gestures. Pleasure appears to be a central aspect to Luther s theology. The problem of the Bondage of the Will is precisely the human inability to feel pleasure in God s will. To be pleased in the visible and tangible creation is not something a Christian should avoid. On the contrary, if one is not pleased with the world that God has created, it is a sign of unbelief and ingratitude. The pleasure of music is aesthetic perception. This in turn necessitates the investigation of Luther s aesthetics. Aesthetic evaluation is not just a part of Luther s thought. Eventually his theology as a whole could be portrayed in aesthetic terms. Luther s extremely positive appreciation of music illutrates his theology as an affective acknowledgement of the goodness of the Creation and faith as an aesthetic contentment.

Cattle Teeth in Graves : Interpretations of animal bones found in Finnish inhumation graves (ca AD 550-1700)

The nature of a burial is always ritualistic. This is often forgotten when dealing with Finnish inhumation burials containing animal bones. Only the animal bones found close to the deceased have traditionally been thought to have a ritualistic purpose. The animal bones found in the filling of the grave, which is still part of the burial, has on the other hand, often been neglected in the previous research. In this Master s thesis I will discuss the function and interpretation of animal bones in graves. The base of this study is six sites, all of different nature, from Finland. Luistari in Eura is from the western coast and is dated to Late Iron Age (and possibly Medieval period), the Medieval hamlet of Finno is situated in Espoo which is situated on the southern coast. Two town burials, Turku and Porvoo, are also included in this study. The graves from Turku are dated to Late Medieval period and Early Renaissance, whereas the cemetery in Porvoo is from the 18th century. Visulahti in Mikkeli is from the Late Iron Age and represents Eastern Finnish burial tradition, the same as Suotniemi from Käkisalmi parish, which is nowadays part of Russia. While parts of the animal bones had already been analysed before, the author also analysed animal bones for the purpose of the present Master´s thesis. The bones were compared to the burial contexts, when possible. Based on the comparisons I have made interpretations which might explain the existence of animal bones in the graves. The interpretations are among others sacrifice, commemoration meals and animal burials. The site could also have been a settlement site prior to the graves, thus the bones in the graves would belong to the settlement phase. When comparing the date of the studied sites, the town burials are later and the animal bones are probably related to previous or contemporary use of the sites as graveyards. On top of this there does not seem to be much difference in burial tradition between Eastern and Western Finland, although at least from the hamlet burials of Finno there are aspects that could be linked to Eastern burials. In making the interpretations I have taken into consideration the aspects of belief during different time periods when they could be accounted as relevant. Also the problems with bone preservation were relevant and challenging for the study. Often only the hardest substance of the skeleton, namely teeth, has been preserved. For this reason the quality of the archaeological documentation was a key issue in this study. In producing quality interpretations of the animal bones in graves, the bones, contexts and their relationship to the surrounding site should be documented with care.

A survey of indian logic from the point of view of computer science

Indian logic has a long history. It somewhat covers the domains of two of the six schools (darsanas) of Indian philosophy, namely, Nyaya and Vaisesika. The generally accepted definition of Indian logic over the ages is the science which ascertains valid knowledge either by means of six senses or by means of the five members of the syllogism. In other words, perception and inference constitute the subject matter of logic. The science of logic evolved in India through three ages: the ancient, the medieval and the modern, spanning almost thirty centuries. Advances in Computer Science, in particular, in Artificial Intelligence have got researchers in these areas interested in the basic problems of language, logic and cognition in the past three decades. In the 1980s, Artificial Intelligence has evolved into knowledge-based and intelligent system design, and the knowledge base and inference engine have become standard subsystems of an intelligent system. One of the important issues in the design of such systems is knowledge acquisition from humans who are experts in a branch of learning (such as medicine or law) and transferring that knowledge to a computing system. The second important issue in such systems is the validation of the knowledge base of the system i.e. ensuring that the knowledge is complete and consistent. It is in this context that comparative study of Indian logic with recent theories of logic, language and knowledge engineering will help the computer scientist understand the deeper implications of the terms and concepts he is currently using and attempting to develop.

Pillaring of smectites using an aluminium oligomer: A study of pillar density and thermal stability

Two smectite samples having different layer charges were pillared using hydroxy aluminium oligomers at a OH/Al ratio of 2.5 and at pH 4.3 to 4.6. Pillaring was carried out at different conditions such as ageing, temperature and base addition time of the pillaring solution, and also in the presence of nonionic surfactant polyoxyethylene sorbitanmonooleate (Tween-80). The primary objective of preparing at different conditions was to introduce varied quantities of aluminium oligomer between the layers and to study its effect on the properties of the pillared products. A simple method has been followed to estimate the amount of interlayer aluminium. A quantity called pillar density number (PDN) based on the ratio of interlayer Al adsorbed to CEC of the parent clay has been effectively used to evaluate the nature of the resulting pillared product. PDN, for a given clay, was found to correlate well with the sharpness of the d(001) peaks for the air dried samples. The calculated number of pillars, varied from 3.00 x 10(18) to 5.32 x 10(18) per meq charge. The present study shows that a higher value of PDN is indicative of better thermal stability. Pillar density number may be conveniently used as a measure of the thermal stability of pillared samples.

Enhancing the mesoporosity of pillared clay catalyst - a study of pillar aggregates and deactivation in alkylation reaction

A sample of montmorillonite was pillared with aluminium polyoxycations in presence of different amounts of tween-80, a nonionic surfactant, ranging from 0.01 to 0.20 mmol/meq of clay. The amount of aluminium sorbed was found to vary with the amount of surfactant added during pillaring. Vapour phase catalytic activity of the samples for alkylation of toluene with methanol in a fixed bed down flow reactor showed that the rate of deactivation, in general, increased with decrease in the pillar density. The samples treated with 0.06 to 0.08 mmol/meq of surfactant showed the lowest deactivation and also an enhancement in the mesopores which did not change on calcining to 540°C. Suppression of deactivation is attributed to the distribution of pillars by the surfactant in such a way as to decrease the coke formation.

Instability, intermittency, and multiscaling in discrete growth models of kinetic roughening

We show by numerical simulations that discretized versions of commonly studied continuum nonlinear growth equations (such as the Kardar-Parisi-Zhangequation and the Lai-Das Sarma-Villain equation) and related atomistic models of epitaxial growth have a generic instability in which isolated pillars (or grooves) on an otherwise flat interface grow in time when their height (or depth) exceeds a critical value. Depending on the details of the model, the instability found in the discretized version may or may not be present in the truly continuum growth equation, indicating that the behavior of discretized nonlinear growth equations may be very different from that of their continuum counterparts. This instability can be controlled either by the introduction of higher-order nonlinear terms with appropriate coefficients or by restricting the growth of pillars (or grooves) by other means. A number of such ''controlled instability'' models are studied by simulation. For appropriate choice of the parameters used for controlling the instability, these models exhibit intermittent behavior, characterized by multiexponent scaling of height fluctuations, over the time interval during which the instability is active. The behavior found in this regime is very similar to the ''turbulent'' behavior observed in recent simulations of several one- and two-dimensional atomistic models of epitaxial growth.

Geoarchaeological Evidence of a Chola-Period Tsunami from an Ancient Port at Kaveripattinam on the Southeastern Coast of India

Literature of the ancient Chola Dynasty (A.D. 9th-11th centuries) of South India and recent archaeological excavations allude to a sea flood that crippled the ancient port at Kaveripattinam, a trading hub for Southeast Asia, and probably affected the entire South Indian coast, analogous to the 2004 Indian Ocean tsunami impact. We present sedimentary evidence from an archaeological site to validate the textual references to this early medieval event. A sandy layer showing bed forms representing high-energy conditions, possibly generated by a seaborne wave, was identified at the Kaveripattinam coast of Tamil Nadu, South India. Its sedimentary characteristics include hummocky cross-stratification, convolute lamination with heavy minerals, rip-up clasts, an erosional contact with the underlying mud bed, and a landward thinning geometry. Admixed with 1000-year-old Chola period artifacts, it provided an optically stimulated luminescence age of 1091 perpendicular to 66 yr and a thermoluminescence age of 993 perpendicular to 73 yr for the embedded pottery sherds. The dates of these proxies converge around 1000 yr B. P., correlative of an ancient tsunami reported from elsewhere along the Indian Ocean coasts. (C) 2011 Wiley Periodicals, Inc.

Increased time-dependent room temperature plasticity in metallic glass nanopillars and its size-dependency

Room temperature, uniaxial compression creep experiments were performed on micro-/nano-sized pillars (having diameters in the range of 250-2000 nm) of a Zr-based bulk metallic glass (BMG) to investigate the influence of sample size on the time-dependent plastic deformation behavior in amorphous alloys. Experimental results reveal that plastic deformation indeed occurs at ambient temperature and at stresses that are well below the nominal quasi-static yield stress. At a given stress, higher total strains accrue in the smaller specimens. In all cases, plastic deformation was found to be devoid of shear bands, i.e., it occurs in homogeneous manner. The stress exponent obtained from the slope of the linear relation between strain rate and applied stress also shows a strong size effect, which is rationalized in terms of the amount of free volume created during deformation and the surface-to-volume ratio of the pillar. (C) 2012 Elsevier Ltd. All rights reserved.

Approaching theoretical strengths by synergistic internal and external size refinement

Refinement of the internal grain size leads to strengthening by retarding dislocation motion. There have also been recent reports that a reduction in external diameter enhances the strength of single crystal pillars. Here we show, in a hitherto unexplored domain, a synergistic increase in strength by a combined reduction in internal (0.5 mu m) and external (20-50 mu m) dimensions, with strengths at failure approaching the theoretical value. (c) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Time dependent superhydrophobicity of drag reducing surfaces

Air can be trapped on the crevices of specially textured hydrophobic surfaces immersed in water. This heterogenous state of wetting in which the water is in contact with both the solid surface and the entrapped air is not stable. Diffusion of air into the surrounding water leads to gradual reduction in the size and numbers of the air bubbles. The sustainability of the entrapped air on such surfaces is important for many underwater applications in which the surfaces have to remain submersed for longer time periods. In this paper we explore the suitability of different classes of surface textures towards the drag reduction application by evaluating the time required for the disappearance of the air bubbles under hydrostatic conditions. Different repetitive textures consisting of holes, pillars and ridges of different sizes have been generated in silicon, aluminium and brass by isotropic etching, wire EDM and chemical etching respectively. These surfaces were rendered hydrophobic with self-assembled layer of fluorooctyl trichlorosilane for silicon and aluminium surfaces and 1-dodecanethiol for brass surfaces. Using total internal reflection the air bubbles are visualized with the help of a microscope and time lapse photography. Irrespective of the texture, both the size and the number of air pockets were found to decrease with time gradually and eventually disappear. In an attempt to reverse the diffusion we explore the possibility of using electrolysis to generate gases at the textured surfaces. The gas bubbles are nucleated everywhere on the surface and as they grow they coalesce with each other and get pinned at the texture edges.