Evaluation of wheat or corn dried distillers' grains with solubles on performance and carcass characteristics of feedlot steers

[EN]A study was conducted on crossbred steers (n=275; 376±924 kg) to evaluate performance and carcass quality of cattle fed wheat or corn dried distillers’ grains with solubles (DDGS). The control ration contained 86.6% rolled barley grain, 5.7% supplement and 7.7% barley silage (DM basis). The four treatments included replacement of barley grain at 20 or 40% of the diet (DM basis) with wheat or corn DDGS. Steers were slaughtered at a common end weight of 645 kg with 100 steers randomly (n=20 per treatment) selected for determination of the retail yield of sub-primal boneless boxed beef (SPBBB). Data were analyzed as a completely randomized design using pen as the experimental unit. Feeding increasing levels of wheat DDGS led to a quadratic increase in dry matter intake (DMI) (P<0.01), whereas increasing levels of corn DDGS led to a quadratic decrease in DMI (P=0.01). Average daily gain was not influenced (P=0.13) by feeding wheat or corn DDGS, but cattle fed corn DDGS exhibited a quadratic increase (P=0.01) in gain:feed. As a result, a quadratic increase (P<0.01) in calculated NEg of the diet was observed as corn DDGS levels increased. A linear decrease (P=0.04) in days on feed (169, 166 and 154 d) was noted when increasing levels of wheat DDGS (0, 20 and 40%) were fed. Dressing percentage increased in a linear fashion with wheat DDGS (P<0.01) inclusion level and in a quadratic fashion (P=0.01) as corn DDGS inclusion level increased although other carcass traits were not affected (P=0.10) by treatment. The results indicate that replacement of barley grain with corn or wheat DDGS up to 40% of the diet (DM) can lead to superior performance (improved gain:feed or reduced days on feed, respectively) with no detrimental effect on quality grade or carcass SPBBB yield.

冷坩埚电磁连铸弯月面形状的数值模拟

电磁连铸中弯月面与磁场耦合作用，磁场约束弯月面成一定的形状。基于磁流体力学理论，导出以感应电流为末知量的冷坩埚电磁连铸的弯月面与磁场耦合的数学模型，并采用等参变换使连续曲面近似弯月面。在与实验结果对照的基础上，计算了感应器电流强度磁场频率、感应器位置以及冷坩埚的分片数等对弯月面形状的影响及变化趋势。

Integration property of a wedge-elliptic cone waverider with scramjet engine

The hypersonic waverider forebody is designed in this paper. For the present waverider, the undersurface is carved out as a stream surface of a hypersonic inviscid flow field around wedge-elliptic cone, and the upper surface is assumed to be a freestream surface. A finite-volume code is used to generate the three-dimensional flow field. The leading edge is determined by satisfying the condition that the lip is situated at the intersection line of shocks.

Collecção das Leis do Imperio do Brasil de 1844

Parte 1 - Leis

IP Simulation of Micro Gas Flows under 3-D Head Sliders

Gas film lubrication of a three-dimensional flat read-write head slider is calculated using the information preservation (IP) method and the direct simulation Monte Carlo (DSMC) method, respectively. The pressure distributions on the head slider surface at different velocities and flying heights obtained by the two methods are in excellent agreement. IP method is also employed to deal with head slider with three-dimensional complex configuration. The pressure distribution on the head slider surface and the net lifting force obtained by the IP method also agree well with those of DSMC method. Much less (of the order about 10(2) less) computational time (the sum of the time used to reach a steady stage and the time used in sampling process) is needed by the IP method than the DSMC method and such an advantage is more remarkable as the gas velocity decreases.

Collecção das Leis da Republica dos Estados Unidos do Brazil de 1894

Parte 1 - Atos do Poder Legislativo

Identification of the egg, early life history and spawning areas if the anchoveta, Cetengraulis mysticetus (Günther), in the Gulf of Panama

ENGLISH: The egg of the anchoveta, Cetengraulis mysticetus (Günther), was identified in the Gulf of Panama by its size, difference in diurnal period of spawning, seasonal occurrence (October to January) and relative abundance. It is pelagic, translucent and oval with mean dimensions of 1.166 mm. and 0.558 mm. for the long and short axes respectively. The egg membrane is unsculptured, the yolk mass is markedly segmented, and no oil globule or pigmentation is present. It was not found in the plankton from mid-January 1957 until the latter part of the following September; during this period the gonads of the anchoveta were immature. Only one other anchovy egg, spawned during the same diurnal period, is sufficiently similar in dimensions to be confused with that of the anchoveta; however, it is slightly smaller. SPANISH: El huevo de la anchoveta, Cetengraulis mysticetus (Günther), fué identificado en el Golfo de Panamá por su tamaño, diferencias en el período diario de desove, su abundancia en la temporada (de octubre a enero) y por su abundancia relativa. El huevo es pelágico, translúcido, oval y con dimensiones promedio de 1.166 mm. y 0.558 mm. para los ejes largo y corto, respectivamente. La membrana es lisa, el vitelo está francamente segmentado y no posee ningún glóbulo graso o pigmentación. El huevo de la anchoveta no se encontró en el plancton en el período comprendido entre mediados de enero y fines de septiembre de 1957; durante este lapso las gónadas estuvieron inactivas.

Sertum palmarum brasiliensium, ou, Relation des palmiers nouveaux du Brésil : découverts, décrits et dessinés d'après nature

A história Bibliográfica de Sertum palmarum brasiliensium... é a seguinte: em 1900, o Deputado Federal por São Paulo, D. Augusto César Miranda Azevedo, apresentou ao Congresso Nacional uma emenda à proposta orçamentária para 1901, autorizando o Poder Executivo "a mandar imprimir na Imprensa Nacional o texto e as estampas da monografia sobre palmeiras do botânico brasileiro Dr. João Barbosa Rodrigues..." Entretanto, a autorização não pôde ser efetivada porque a Imprensa Nacional não dispunha de equipamento para a reprodução de estampas. Em 1901, o Senador pelo Estado do Pará, Dr. Lauro Sodré, apresentou emenda à proposta orçamentária para 1902, cuja lei estabeleceu no art. 6º : "é o Governo autorizado a mandar imprimir na Europa ou em país onde houver mais vantagem, a obra Sertum palmarum..., abrindo para tal fim o necessário crédito, e de acordo com o autor". O crédito -- duzentos contos de réis -- foi finalmente, aberto o Decreto nº 4.428, de 12 de junho de 1902, assinado por Campos Sales e referendado por Sabino Barroso, Ministro da Justiça. A obra foi impressa em Bruxelas sob a direção do próprio Barbosa Rodrigues, que, para esse fim ali se demorou nove meses. Trata-se de trabalho gráfico de primeira ordem, tanto pela reprodução colorida das estampas, como pelo texto e encadernação.

A agricultura familiar e o direito humano à alimentação : conquistas e desafios

Mostra a importância, campo ou nas cidades, da valorização da agricultura familiar como instrumento fundamental para a produção sustentável de alimentos, a segurança alimentar e a erradicação da pobreza.

Parecer da CMO sobre projetos de créditos suplementares e especiais : faculdade ou exigência constitucional ?

O presente estudo tem a finalidade de enfrentar a questão referente à necessidade de exame e emissão de parecer sobre os projetos de lei relativos aos créditos suplementares e especiais pela Comissão Mista Permanente a que se refere o art. 166, § 1º, da Constituição Federal antes de serem apreciados pelo Congresso Nacional, na forma do regimento comum.

PEC 565/2006 : Orçamento impostitivo

Esta Nota Técnica tem por objetivo atender solicitação do Deputado Édio Lopes, relator da Comissão Especial que analisa a Proposta de Emenda à Constituição nº 565-A, de 2006, que “Altera os arts. 57, 165, 166, e acrescenta art. 165-A, todos da Constituição Federal, tornando de execução obrigatória a programação constante da lei orçamentária anual”.

燃烧物理学基础

Resposta de hum Ministro a el Rei Filippe IV sobre o fazer, ou naõ fazer as pazes com Portugal

Ano de publicação : 166?.