Analysis of Alpha CA Genes in Early Vertebrates and ; High-Invertebrates

Carbonic anhydrases are enzymes that are ubiquitously found in all organisms that are engaged in catalyzing the hydration of carbon dioxide to form bicarbonate and proton and vice versa. They are crucial in the process of respiration, bone resorption, pH regulation, ion transport, and photosynthesis in plants. Out of the five classes of carbonic anhydrase α, β, γ, δ, ζ this study focused in the α carbonic anhydrases. This class of CAs constitute of 16 subfamilies in mammals that include 3 non-active enzymes known as Carbonic Anhydrase Related Proteins. The inactiveness of these enzymes is due to the loss of one or more Histidine residues in the active site. This thesis was conducted based on the aim of studying evolutionary analysis of carbonic anhydrase sequences from organisms spanning from the Cambrian age. It was carried out in two phases. The first phase was the sequence collection, which involved many biological sequence databases as a source. The scope of this segment included sequence alignments and analysis of the sequence manually and in an automated form incorporating few analysis tools. The second Phase was phylogenetic analysis and exploring the subcellular location of the proteins, which was key for the evolutionary analysis. Through the medium of the methods conducted with respect to the phases mentioned above, it was possible to accomplish the desired result. Certain thought-provoking sequences were come across and analyzed thoroughly. Whereas, Phylogenetics showed interesting results to bolster previous findings and new findings as well which lay bedrock for future intensified studies.

Curricular training report: clinical studies coordination in a clinical research organization vs an investigational site perspective

This report describes my experience of nine months as a trainee of a CRO (Eurotrials, Scientific Consultants), as well as a trainee of a clinical research site (Clinical Academic Center – Braga, Association). This document describes the European framework about clinical research and the Portuguese situation compared to similar countries. The activities developed during this internship are also described. These activities are divided in two phases. The first one occurred in Eurotrials, Scientific Consultants, a CRO specialized in clinical research and scientific advice. The first weeks were dedicated to intensive self-training needed to perform CTA tasks. These tasks included qualification, initiation and monitoring activities related to clinical trials, as well as the development of a quality management system. The second phase took place on 2CA-Braga, a clinical research center located in Hospital of Braga. Clinical studies coordination was the main focus of this second phase of my internship, as well as negotiation of clinical studies agreements. I had also the opportunity to participate in “1as Jornadas de Investigação Clínica e Inovação” (1st Clinical Investigation and Innovation Conference) organized by 2CA-Braga. Globally, this internship was a great opportunity to get knowledge and experience in the implementation and management of clinical trials, in a CRO and clinical research site perspectives. These two perspectives provided an interesting overview about the scientific needs of different players involved in clinical research. To conclude, this internship strengthened the knowledge acquired from my academic background, which make me able to face and overcome new challenges in the clinical research area.

Développement et pré-test d’un plan de soins de suivi pour des femmes atteintes du cancer de l’endomètre avec traitements adjuvants lors de la transition de la fin du traitement actif vers la survie au cancer

La fin du traitement actif et le début de la phase de survie correspondent à une période de transition qui présente de nombreux défis pour la personne survivante au cancer, les soignants et le système de santé. La phase de survie au cancer est une phase distincte mais négligée du continuum de soins. Pour faciliter la transition de la fin du traitement actif vers la survie et optimiser la coordination des soins de suivi, la mise en place d’un plan de soins de suivi (PSS) est proposée. Le but de cette recherche est de développer, de mettre en place et d’évaluer si un plan de soins de suivi (PSS) permet de répondre aux besoins globaux, de diminuer la détresse émotionnelle et de favoriser les comportements d’autogestion de santé de femmes atteintes du cancer de l’endomètre (FACE) lors de la transition de la fin du traitement actif vers la survie au cancer. Elle comprend deux phases distinctes. La première phase visait d’abord le développement d’un plan de soins de suivi (PSS) pour des femmes atteintes du cancer de l’endomètre avec traitements adjuvants. La sélection du contenu du PSS a été faite à partir de la recension des écrits et des données recueillies lors d’entrevues individuelles avec 19 FACE, 24 professionnels de la santé travaillant avec cette clientèle et quatre gestionnaires de proximité en oncologie. Cette première phase avait également pour but la validation du contenu du PSS auprès de dix professionnels de la santé impliqués dans l’étude. La seconde phase consistait à évaluer la faisabilité, l’acceptabilité du PSS et à en pré-tester l’utilité à répondre aux besoins globaux, à diminuer la détresse émotionnelle (peur de la récidive) et à favoriser l’autogestion de santé auprès d’un groupe de 18 femmes atteintes du cancer de l’endomètre avec traitements adjuvants à la fin du traitement actif vers la survie. Sur le plan de la faisabilité, les résultats suggèrent que la mise en place du PSS comporte des défis en termes de temps, de ressources et de coordination pour l’infirmière pivot en oncologie (IPO). Concernant l’acceptabilité du PSS, les FACE le perçoivent comme un outil d’information utile qui favorise la communication avec le médecin de famille ou d’autres professionnels de la santé. Les IPO soutiennent sa valeur ajoutée à la fin du traitement et soulignent que la discussion du contenu du PSS fait ressortir des éléments de surveillance et de suivi essentiels à prendre en compte pour la phase de survie et permet de mettre l’emphase sur l’autogestion de sa santé. Pour les médecins de famille, le PSS est un outil d’information pour les survivantes qui favorise la réassurance, la communication et la continuité des soins entre professionnels de la santé. Enfin, pour ce qui est de l’utilité du PSS à répondre aux besoins globaux, les résultats suggèrent que l’ensemble des besoins sont plus satisfaits trois mois après la fin des traitements pour le groupe ayant reçu un PSS. Bien que la peur de récidive du cancer (PRC) s’améliore au suivi de trois mois pour le groupe exposé au PSS, 55% des FACE conservent un score cliniquement significatif de 13 à la sous-échelle de sévérité de peur de récidive à la fin du traitement et 42% au suivi de trois mois. Les comportements d’autogestion de santé s’améliorent entre la fin du traitement et le suivi de trois mois pour le groupe exposé un PSS. Considérant ces résultats, la démarche soutient la pertinence de mettre en place un PSS à la fin du traitement actif pour les FACE pour répondre à des besoins d’information, favoriser la communication et la continuité des soins avec les professionnels de la santé et les comportements d’autogestion de santé dans la phase de survie. Cependant, des contraintes de temps, de ressources et de coordination doivent être prises en compte pour sa mise en place dans le milieu clinique. Mots-clés : Transition, fin du traitement actif, besoins, survie au cancer, plan de soins de suivi.

Integrating corporate responsbility into investor relations. Sustainability report as a part of investor relations.

Corporate responsibility is a question that many stakeholders are interested in. These stakeholders can be e.g. company’s employees, partners, clients, media or investors. Especially for listed companies, investors are one of the most important stakeholders. It is essential for a company to maintain the trust of current investors and gain the trust of potential investors. Investors cannot be divided only into two groups, individual and institutional investors. Investors differ a lot, especially when it comes to investment decisions. Investors can make their investment decisions based on many things, and strong financial performance is not necessarily good enough a reason. Socially responsible investors value responsibility and sustainability related factors when making investment decisions. These things can be divided into three dimensions: environmental, social and economic responsibility. Many companies disclose a sustainability report in order to be able to answer to the needs of different stakeholders, including investors. The purpose of this thesis was to study how companies integrate corporate responsibility into investor relations, and how sustainability report can be used in investor relations. Furthermore, this thesis examined the key elements of sustainability reports. The research was made by a qualitative study in two phases. In the first phase five representatives of two Finnish listed companies, KONE and Kesko were interviewed. The interviewees are professionals within investor relations and corporate responsibility communications. In the second phase of the study the sustainability reports of these two companies were analyzed with content analysis. The existing theory and the interviews created the base for the content analysis. This study suggests that there is a connection between corporate responsibility and investor relations, and those should be integrated. Socially responsible investors are an important target group for companies, and companies should be able to respond to their and other stakeholders’ needs. Sustainability report can be used as a tool both within the company and in external communication for these purposes.

Perspective of nurses involved in an action-research study on the changes observed in care provision: results from a focus group

Background According to the Nursing Role Effectiveness Model, the structural components (nurses, patients, organizational variables) may directly BMC Health Services Research 2016, Volume 16 Suppl 3 Page 41 of 132 or indirectly influence the care outcomes through the process (actions developed by the nurses). Objectives: To identify the changes that, from the nurses' perspective, occurred during the provision of care to patients with peripheral venous catheters (PVCs) between the first and the second phase of the Action-Research (AR) study, and the components that influenced these changes. Methods During the second phase of the AR study (December, 2011), a focus group composed of six nurses was held at a medicine unit of a central hospital. A script was used with six open-ended questions. All ethical procedures were followed. Results Positive changes in nursing care provision to patients with PVCs were identified related to the type of dressing used, patient monitoring, aseptic care, and infusion rate. The nurses believed that some variables of the organizational component influenced those changes, such as the centralization of the material used for catheterization or the availability of materials, such as transparent dressings. The nurses also valued the following aspects: knowledge of the research findings of the first phase; training sessions on the topic; and, above all, the nurses' engagement throughout the process of change in care provision. Conclusions Considering the model of analysis used, we found that the changes identified in nursing care resulted from several factors, with the engagement of the professionals themselves in the change process being considered a key aspect.

Ferramentas Web, Web 2.0 e software livre em EVT: estudo sobre a integração de ferramentas digitais no currículo da disciplina de educação visual e tecnológica

A utilização das TIC ocupam um lugar cada vez mais importante nas nossas escolas, marcado sobretudo pela evolução das tecnologias e pela utilização em contexto educativo de muitas ferramentas da Web 2.0. Esse facto é muito notório na disciplina de Educação Visual e Tecnológica, de carácter eminentemente prático, onde é permitido explorar várias ferramentas digitais para abordagem de conteúdos da disciplina e para a criação de produtos gráficos e plásticos. Com o aparecimento da Web 2.0 e a disponibilização de milhares de novas ferramentas digitais aos utilizadores da Internet, estimula-se um interesse cada vez maior na adoção de metodologias e estratégias com recurso a estes media e que suportem uma aprendizagem mais eficaz e motivadora para os alunos, articulando-se os suportes tradicionais de EVT com os novos media digitais. Neste contexto, o presente estudo é o resultado duma investigação-ação realizada no âmbito do Programa Doutoral em Multimédia em Educação da Universidade de Aveiro onde se implementou a integração de ferramentas da Web, Web 2.0 e Software Livre em contexto educativo na disciplina de EVT, na qual poderiam ser utilizadas tanto as técnicas tradicionais de realização mais usuais na disciplina como a integração e articulação com as ferramentas digitais, suportadas por software livre (e outros de utilização gratuita), a Web e a Web 2.0 para suporte ao ensino e aprendizagem dos diversos conteúdos e áreas de exploração da disciplina. Este estudo, desenhado em três ciclos, envolveu num primeiro momento a constituição de uma comunidade de prática de professores alargada, sendo criadas seis turmas de formação que reuniram um total de 112 professores que pretendiam integrar as ferramentas digitais em EVT. Para além da pesquisa, análise, seleção e catalogação destas 430 ferramentas digitais recenseadas, produziram-se 371 manuais de apoio à utilização das mesmas, sendo estes recursos disponibilizados no espaço do EVTdigital. Num segundo ciclo, decorrente da avaliação realizada, foi criada a distribuição EVTux para simplificar o acesso e utilização das ferramentas digitais em contexto de EVT. Finalmente, o terceiro ciclo, decorre da eliminação da disciplina de EVT do currículo do 2º ciclo do ensino básico e a sua substituição por duas novas disciplinas, tendo-se realizada a respetiva análise de conteúdo das metas curriculares e produzido a aplicação As ferramentas digitais do Mundo Visual, concebida para contextualizar e indexar as ferramentas digitais selecionadas para a nova disciplina de Educação Visual.Os resultados deste estudo apontam claramente para a possibilidade de integrar na disciplina de Educação Visual e Tecnológica (ou no presente momento, em Educação Visual) ferramentas digitais para abordagem aos conteúdos e áreas de exploração, bem como a possibilidade de se constituírem facilmente comunidades de prática (como foi o caso) que possam colaborar na catalogação destas ferramentas no contexto específico da disciplina e para a necessidade sentida pelos professores em obter informação e formação que os possa atualizar quanto à integração das TIC no currículo. Apresentam-se, ainda, as limitações deste estudo que passaram sobretudo pelo impacto negativo que a eliminação da disciplina provocou na motivação dos docentes e a sua consequente participação no decorrer de algumas fases do trabalho, e ainda da dificuldade de gestão de uma equipa de professores colaboradores tão numerosa e diversificada. Nesse sentido, são também apresentadas sugestões para estudos futuros.

Análise de programas de educação ambiental no licenciamento ambiental de usinas hidrelétricas no Rio Grande do Sul : um estudo de caso

O trabalho intitulado - Análise de programas de Educação Ambiental no licenciamento ambiental de usinas hidrelétricas no Rio Grande do Sul: um estudo de caso - busca fazer uma análise compreensiva, reflexiva e problematizadora das ações de Educação Ambiental realizadas durante o processo de licenciamento ambiental, como medidas mitigadoras e/ou compensatórias de impactos ambientais causados pela instalação/operação de empreendimentos hidrelétricos. O objeto de análise foi o Programa de Educação Ambiental da UHE São José, instalada no rio Ijuí, interior do estado. Utilizou-se o movimento recursivo e reflexivo para elaboração da pesquisa, onde a primeira fase foi composta pelo levantamento bibliográfico que serviu de base para as discussões propostas, e a segunda fase foi composta pela investigação do referido programa, tendo como corpus da pesquisa documentos e entrevistas, e utilizando-se da Análise Textual Discursiva (ATD) como metodologia de análise. Os resultados obtidos fazem refletir sobre a ocupação dos espaços do licenciamento ambiental por uma Educação Ambiental que vá além do simples cumprimento das leis e normas, mas que seja de fato integradora e participativa, e envolva o compromisso dos empreendedores, das comunidades atingidas e dos órgãos fiscalizadores, contribuindo com a gestão ambiental e a sustentabilidade dos locais em transformação.

Modélisation des structures sandwiches avec un amortissement viscoélastique intégré par une méthode hybride FEM-TMM

Cette thèse traite de la modélisation numérique de la réponse vibro-acoustique de structures sandwiches-composites avec matériaux viscoélastiques intégrés soumises à différents types d’excitations mécaniques et acoustiques. Dans une première phase, nous avons utilisé une approche de synthèse modale pour calculer les principaux indicateurs vibro-acoustiques de la structure : la vitesse quadratique, la puissance rayonnée, la perte par transmission…Ensuite, l’intégrale de Rayleigh a été exploitée pour calculer la puissance rayonnée de chaque structure. L’obstacle majeur que nous avons alors surmonté, était de gérer efficacement la dépendance en fréquence des propriétés de la couche viscoélastique dans l’approche de synthèse modale. Dans une second phase, en partant du champ vibratoire calculé dans la première étape, nous avons développé une méthode hybride FEM-TMM (méthode des éléments finis – méthode de matrices de transfert) pour prédire avec précision et en un temps de calcul acceptable, et jusqu’en hautes fréquences, les principaux paramètres de conception vibro-acoustique de ces structures, notamment l’amortissement équivalent et les nombres d’ondes suivant les deux directions spatiales x et y de propagation de l’onde acoustique. Les validations numériques que nous avons effectuées, montrent bien la robustesse de l'algorithme que nous avons développé. Ce dernier reste toutefois limité à des structures planes. Dans une troisième phase de ce travail, une étude paramétrique sur l’effet de l’emplacement et de la forme de la couche viscoélastique a été réalisée. Cette étude a été faite en se servant de la méthode hybride FEM-TMM pour calculer la réponse acoustique (puissance transmise et perte par transmission).

Geothermal district heating networks: modelling novel operational strategies incorporating heat storage

The value of integrating a heat storage into a geothermal district heating system has been investigated. The behaviour of the system under a novel operational strategy has been simulated focusing on the energetic, economic and environmental effects of the new strategy of incorporation of the heat storage within the system. A typical geothermal district heating system consists of several production wells, a system of pipelines for the transportation of the hot water to end-users, one or more re-injection wells and peak-up devices (usually fossil-fuel boilers). Traditionally in these systems, the production wells change their production rate throughout the day according to heat demand, and if their maximum capacity is exceeded the peak-up devices are used to meet the balance of the heat demand. In this study, it is proposed to maintain a constant geothermal production and add heat storage into the network. Subsequently, hot water will be stored when heat demand is lower than the production and the stored hot water will be released into the system to cover the peak demands (or part of these). It is not intended to totally phase-out the peak-up devices, but to decrease their use, as these will often be installed anyway for back-up purposes. Both the integration of a heat storage in such a system as well as the novel operational strategy are the main novelties of this thesis. A robust algorithm for the sizing of these systems has been developed. The main inputs are the geothermal production data, the heat demand data throughout one year or more and the topology of the installation. The outputs are the sizing of the whole system, including the necessary number of production wells, the size of the heat storage and the dimensions of the pipelines amongst others. The results provide several useful insights into the initial design considerations for these systems, emphasizing particularly the importance of heat losses. Simulations are carried out for three different cases of sizing of the installation (small, medium and large) to examine the influence of system scale. In the second phase of work, two algorithms are developed which study in detail the operation of the installation throughout a random day and a whole year, respectively. The first algorithm can be a potentially powerful tool for the operators of the installation, who can know a priori how to operate the installation on a random day given the heat demand. The second algorithm is used to obtain the amount of electricity used by the pumps as well as the amount of fuel used by the peak-up boilers over a whole year. These comprise the main operational costs of the installation and are among the main inputs of the third part of the study. In the third part of the study, an integrated energetic, economic and environmental analysis of the studied installation is carried out together with a comparison with the traditional case. The results show that by implementing heat storage under the novel operational strategy, heat is generated more cheaply as all the financial indices improve, more geothermal energy is utilised and less fuel is used in the peak-up boilers, with subsequent environmental benefits, when compared to the traditional case. Furthermore, it is shown that the most attractive case of sizing is the large one, although the addition of the heat storage most greatly impacts the medium case of sizing. In other words, the geothermal component of the installation should be sized as large as possible. This analysis indicates that the proposed solution is beneficial from energetic, economic, and environmental perspectives. Therefore, it can be stated that the aim of this study is achieved in its full potential. Furthermore, the new models for the sizing, operation and economic/energetic/environmental analyses of these kind of systems can be used with few adaptations for real cases, making the practical applicability of this study evident. Having this study as a starting point, further work could include the integration of these systems with end-user demands, further analysis of component parts of the installation (such as the heat exchangers) and the integration of a heat pump to maximise utilisation of geothermal energy.

Differences in grain growth of calcite: a field-based modeling approach

Normal grain growth of calcite was investigated by combining grain size analysis of calcite across the contact aureole of the Adamello pluton, and grain growth modeling based on a thermal model of the surroundings of the pluton. In an unbiased model system, i.e., location dependent variations in temperature-time path, 2/3 and 1/3 of grain growth occurs during pro- and retrograde metamorphism at all locations, respectively. In contrast to this idealized situation, in the field example three groups can be distinguished, which are characterized by variations in their grain size versus temperature relationships: Group I occurs at low temperatures and the grain size remains constant because nano-scale second phase particles of organic origin inhibit grain growth in the calcite aggregates under these conditions. In the presence of an aqueous fluid, these second phases decay at a temperature of about 350 °C enabling the onset of grain growth in calcite. In the following growth period, fluid-enhanced group II and slower group III growth occurs. For group II a continuous and intense grain size increase with T is typical while the grain growth decreases with T for group III. None of the observed trends correlate with experimentally based grain growth kinetics, probably due to differences between nature and experiment which have not yet been investigated (e.g., porosity, second phases). Therefore, grain growth modeling was used to iteratively improve the correlation between measured and modeled grain sizes by optimizing activation energy (Q), pre-exponential factor (k0) and grain size exponent (n). For n=2, Q of 350 kJ/mol, k0 of 1.7×1021 μmns−1 and Q of 35 kJ/mol, k0 of 2.5×10-5 μmns−1 were obtained for group II and III, respectively. With respect to future work, field-data based grain growth modeling might be a promising tool for investigating the influences of secondary effects like porosity and second phases on grain growth in nature, and to unravel differences between nature and experiment.

A new technique to automatically quantify microstructures of fine grained carbonate mylonites: two-step etching combined with SEM imaging and image analysis

A two-step etching technique for fine-grained calcite mylonites using 0.37% hydrochloric and 0.1% acetic acid produces a topographic relief which reflects the grain boundary geometry. With this technique, calcite grain boundaries become more intensely dissolved than their grain interiors but second phase minerals like dolomite, quartz, feldspars, apatite, hematite and pyrite are not affected by the acid and therefore form topographic peaks. Based on digital backscatter electron images and element distribution maps acquired on a scanning electron microscope, the geometry of calcite and the second phase minerals can be automatically quantified using image analysis software. For research on fine-grained carbonate rocks (e.g. dolomite calcite mixtures), this low-cost approach is an attractive alternative to the generation of manual grain boundary maps based on photographs from ultra-thin sections or orientation contrast images.

Prática de ensino supervisionada em Educação Pré-escolar e Ensino do 1.º Ciclo do Ensino Básico

O presente relatório retrata e analisa o trabalho desenvolvido no âmbito da unidade curricular de Prática de Ensino Supervisionada (PES), do mestrado em Educação PréEscolar e Ensino do 1.º Ciclo do Ensino Básico da Escola Superior de Educação do Instituto Politécnico de Bragança. A prática pedagógica foi desenvolvida em dois contextos da cidade de Bragança, sendo numa primeira fase num Jardim de Infância de uma Instituição Particular de Solidariedade Social (IPSS), numa sala com catorze crianças de três e quatro anos de idade e, numa segunda fase, numa escola do 1.º Ciclo do Ensino Básico numa Instituição da rede pública, numa sala de 3.º ano com dezanove crianças de oito anos de idade. O principal objetivo deste relatório é dar a conhecer o trabalho realizado em ambos os contextos, descrevendo e refletindo sobre a prática realizada. Ao longo da PES procurámos desenvolver atividades que respondessem às necessidades e interesses das crianças, de forma a criar momentos de participação ativa, de partilha de saberes e de cooperação no âmbito das Orientações Curriculares para a Educação Pré-escolar e do Programa Nacional do 3.º ano do 1.º Ciclo do Ensino Básico. Era nossa intenção mostrar como o livro para a infância pode ser utilizado como promotor de experiências de ensino/aprendizagem ricas e diversificadas, tendo sempre como base a leitura. Nesta perspetiva optámos pela questão-problema: Como podemos fomentar nas crianças o gosto pela leitura e pelo livro? Neste âmbito formulámos os seguintes objetivos: (i) Promover o gosto pela leitura; (ii) Despertar o interesse dos alunos pela leitura literária, recorrendo à utilização do fantástico e do maravilhoso para a estimulação do imaginário na infância; (iii) Envolver a família na promoção leitora; (iv) Proporcionar um conjunto de atividades de forma a trabalhar três momentos fulcrais para a leitura: antes da leitura (pré-leitura), no decorrer da leitura (leitura) e no fim da leitura (pós leitura). A metodologia utilizada foi a investigação qualitativa de natureza interpretativa, baseando-nos na utilização de instrumentos de recolha de dados do tipo qualitativo, como a observação, as notas de campo e fotografias. Este tipo de investigação apresenta os resultados através de narrativas com descrições contextuais e citações dos participantes em experiências de ensino/aprendizagem significativas que estimularam o gosto pela leitura e pelo livro das crianças de ambos os contextos.

Children's health and indoor air quality in primary schools and homes in Portugal-Study design

The main aim of the research project "On the Contribution of Schools to Children's Overall Indoor Air Exposure" is to study associations between adverse health effects, namely, allergy, asthma, and respiratory symptoms, and indoor air pollutants to which children are exposed to in primary schools and homes. Specifically, this investigation reports on the design of the study and methods used for data collection within the research project and discusses factors that need to be considered when designing such a study. Further, preliminary findings concerning descriptors of selected characteristics in schools and homes, the study population, and clinical examination are presented. The research project was designed in two phases. In the first phase, 20 public primary schools were selected and a detailed inspection and indoor air quality (IAQ) measurements including volatile organic compounds (VOC), aldehydes, particulate matter (PM2.5, PM10), carbon dioxide (CO2), carbon monoxide (CO), bacteria, fungi, temperature, and relative humidity were conducted. A questionnaire survey of 1600 children of ages 8-9 years was undertaken and a lung function test, exhaled nitric oxide (eNO), and tear film stability testing were performed. The questionnaire focused on children's health and on the environment in their school and homes. One thousand and ninety-nine questionnaires were returned. In the second phase, a subsample of 68 children was enrolled for further studies, including a walk-through inspection and checklist and an extensive set of IAQ measurements in their homes. The acquired data are relevant to assess children's environmental exposures and health status.

Motivação para amamentação em função da escolaridade materna

Enquadramento: Atualmente a prevalência da amamentação à saída da maternidade é elevada, no entanto não temos valores semelhantes quanto ao aleitamento materno exclusivo, nem no seu prolongamento até aos dois anos. Objetivos: Verificar as relações entre a motivação das puérperas para a amamentação e variáveis sociodemográficas e obstétricas e analisar a influência das variáveis sociodemográficas e obstétricas na motivação para a amamentação quando mediadas pela escolaridade da puérpera. Material e métodos: Estudo não experimental, quantitativo, descritivo correlacional e analítico. O tipo de amostragem é não probabilístico por conveniência. O instrumento de colheita de dados foi o questionário, aplicado a 479 puérperas (média de idade 30,56 anos) no dia da alta hospitalar. O questionário permitiu fazer a caracterização da amostra em termos sociodemográficos e obstétricos. Foi ainda utilizada a escala de Motivação para Amamentação de Nelas, Ferreira & Duarte (2008). Resultados: Os resultados obtidos revelam que 86,6% são casadas ou vivem em união de fato e pertencem a uma família nuclear (89,1%). Na amostra, 59,5% tem o Ensino Superior e 73.9% encontra-se empregada e 55,3% reside em meio urbano. A maioria (43,0%), esteve grávida só uma vez e 34.4% já tinha tido uma gestação anterior. São mães pela primeira vez 48,0%, 79,3% realizou seis ou mais consultas tal como o preconizado, e 92,4% planeou a gravidez. A maioria dos partos foi de termo (68,4%). A quase totalidade (9 em cada 10) revela elevada motivação para amamentar. A idade, o estado civil, a residência e as habilitações literárias não influenciam a motivação geral para a amamentação As puérperas desempregadas são as mais motivadas. As puérperas mais motivadas tiveram duas ou mais gestações, e são multíparas. Não foi provada a relação entre as outras variáveis obstétricas e a motivação para a amamentação. A variável mediadora apenas teve impacto com o local de residência, onde as participantes residentes em meio urbano e com ensino superior são as mais motivadas na dimensão fisiológica, seguidas das residentes em meio urbano e com habilitações literárias até ao ensino secundário. Conclusões: Sugerimos a criação de um grupo de trabalho com atuação na comunidade escolar para capacitar os jovens sobre a importância do aleitamento materno, recriando uma 8 cultura de amamentação assente nas orientações emanadas na política de aleitamento materno dos Hospitais amigos dos bebés. Palavras-chave: Amamentação, Motivação, Escolaridade.

Usefulness of social tagging in organizing and providing access to the web: An analysis of indexing consistency and quality

This dissertation research points out major challenging problems with current Knowledge Organization (KO) systems, such as subject gateways or web directories: (1) the current systems use traditional knowledge organization systems based on controlled vocabulary which is not very well suited to web resources, and (2) information is organized by professionals not by users, which means it does not reflect intuitively and instantaneously expressed users’ current needs. In order to explore users’ needs, I examined social tags which are user-generated uncontrolled vocabulary. As investment in professionally-developed subject gateways and web directories diminishes (support for both BUBL and Intute, examined in this study, is being discontinued), understanding characteristics of social tagging becomes even more critical. Several researchers have discussed social tagging behavior and its usefulness for classification or retrieval; however, further research is needed to qualitatively and quantitatively investigate social tagging in order to verify its quality and benefit. This research particularly examined the indexing consistency of social tagging in comparison to professional indexing to examine the quality and efficacy of tagging. The data analysis was divided into three phases: analysis of indexing consistency, analysis of tagging effectiveness, and analysis of tag attributes. Most indexing consistency studies have been conducted with a small number of professional indexers, and they tended to exclude users. Furthermore, the studies mainly have focused on physical library collections. This dissertation research bridged these gaps by (1) extending the scope of resources to various web documents indexed by users and (2) employing the Information Retrieval (IR) Vector Space Model (VSM) - based indexing consistency method since it is suitable for dealing with a large number of indexers. As a second phase, an analysis of tagging effectiveness with tagging exhaustivity and tag specificity was conducted to ameliorate the drawbacks of consistency analysis based on only the quantitative measures of vocabulary matching. Finally, to investigate tagging pattern and behaviors, a content analysis on tag attributes was conducted based on the FRBR model. The findings revealed that there was greater consistency over all subjects among taggers compared to that for two groups of professionals. The analysis of tagging exhaustivity and tag specificity in relation to tagging effectiveness was conducted to ameliorate difficulties associated with limitations in the analysis of indexing consistency based on only the quantitative measures of vocabulary matching. Examination of exhaustivity and specificity of social tags provided insights into particular characteristics of tagging behavior and its variation across subjects. To further investigate the quality of tags, a Latent Semantic Analysis (LSA) was conducted to determine to what extent tags are conceptually related to professionals’ keywords and it was found that tags of higher specificity tended to have a higher semantic relatedness to professionals’ keywords. This leads to the conclusion that the term’s power as a differentiator is related to its semantic relatedness to documents. The findings on tag attributes identified the important bibliographic attributes of tags beyond describing subjects or topics of a document. The findings also showed that tags have essential attributes matching those defined in FRBR. Furthermore, in terms of specific subject areas, the findings originally identified that taggers exhibited different tagging behaviors representing distinctive features and tendencies on web documents characterizing digital heterogeneous media resources. These results have led to the conclusion that there should be an increased awareness of diverse user needs by subject in order to improve metadata in practical applications. This dissertation research is the first necessary step to utilize social tagging in digital information organization by verifying the quality and efficacy of social tagging. This dissertation research combined both quantitative (statistics) and qualitative (content analysis using FRBR) approaches to vocabulary analysis of tags which provided a more complete examination of the quality of tags. Through the detailed analysis of tag properties undertaken in this dissertation, we have a clearer understanding of the extent to which social tagging can be used to replace (and in some cases to improve upon) professional indexing.