Coverage mobilization by different no-tillage in-line handling mechanisms

Vegetation cover on soil acts positively in maintaining temperature and soil moisture, yet, it has been imposing specific operational conditions on seeders. The objective of this study was to evaluate performance of different mechanisms regarding straw mobilization, employed in a no-till seeder. The experimental area was conducted on clayey soil under no-tillage with a large quantity of sorghum residue. The experiment was established in a randomized block design, as the treatments consisted of a combination of two mechanisms at front of the furrow opener composed of cutting disc and row cleaners, and three mechanisms behind the seed furrower, covering discs prototype model M1, Spider and commercial model, with the combination of cutting disc and Spider model not being evaluated. We assessed the coverage permanence on soil index, vegetation mass on surface and inside the line. The treatment containing the row cleaner mechanism efficiently removed straw from the surface of sowing line as well as the return one acted on straw replacement. It was identified that use of the cutting disc at the front of seeder contributed to the increase of straw installation inside the line, three times more than in the row cleaner system when operating individually. Covering mechanism with row cleaners reduced straw inside the line and kept line covering similar to treatment of cutting disc operating alone.

Identification and characterization of new genes and pathways regulating spermatogonial cell fate

Spermatogenesis, i.e sperm production in the seminiferous tubules of the testis, is a complex process that takes over one month to complete. Life-long ability of sperm production ultimately lies in a small population of undifferentiated cells, called spermatogonial stem cells (SSCs). These cells give rise to differentiating spermatogonia, which are committed to mature into spermatozoa. SSCs represent a heterogeneous population of cells and many aspects of their basic biology are still unknown. Understanding the mechanisms behind the cell fate decision of these cells is important to gain more insights into the causes of infertility and testis cancer. In addition, an interesting new aspect is the use of testis-derived stem cells in regenerative medicine. Our data demonstrated that adult mouse testis houses a population of Nanog-expressing spermatogonia. Based on mRNA and protein analysis these cells are enriched in stage XII of the mouse seminiferous epithelial cycle. The cells derived from this stage have the highest capacity to give rise to ES cell-like cells which express Oct4 and Nanog. These cells are under tight non- GDNF regulation but their fate can be dictated by activating p21 signalling. Comparative studies suggested that these cells are regulated like ES cells. Taken together these data imply that pluripotent cells are present in the adult mammalian testis. CIP2A (cancerous inhibitor of PP2A) has been associated with tumour aggressiveness and poor prognosis. In the testis it is expressed by the descendants of stem cells, i.e. the spermatogonial progenitor cells. Our data suggest that CIP2A acts upstream of PLZF and is needed for quantitatively normal spermatogenesis. Classification of CIP2A as a cancer/testis gene makes it an attractive target for cancer therapy. Study on the CIP2A deficient mouse model demonstrates that systemic inhibition of CIP2A does not severely interfere with growth and development or tissue or organ function, except for the spermatogenic output. These data demonstrate that CIP2A is required for quantitatively normal spermatogenesis. Hedgehog (Hh) signalling is involved in the development and maintenance of many different tissues and organs. According to our data, Hh signalling is active at many different levels during rat spermatogenesis: in spermatogonia, spermatocytes and late elongating spermatids. Localization of Suppressor of Fused (SuFu), the negative regulator of the pathway, specifically in early elongating spermatids suggests that Hh signalling needs to be shut down in these cells. Introduction of Hh signalling inhibitor resulted in an increase in germ cell apoptosis. Follicle-stimulating hormone (FSH) and inhibition of receptor tyrosine kinases resulted in down-regulation of Hh signalling. These data show that Hh signalling is under endocrine and paracrine control and it promotes germ cell survival.

Pk-IFRS -standardin edut ja ongelmat - empiirinen tutkimus

Pk-IFRS -standardi on pk-yritysten sekä niiden tilinpäätösten käyttäjien erityistarpeita ajatellen kehitetty kansainvälinen tilinpäätösstandardi. Tämän tutkimuksen tavoitteena on selvittää, mitä etuja ja ongelmia standardin soveltamiseen liittyy Euroopan unionin pk-yritysten keskuudessa. Tutkimuksessa tarkastellaan erityisesti tilinpäätösten laatijoiden ja käyttäjien näkemyksiä standardin eduista ja ongelmista sekä tilinpäätösinformaation vertailukelpoisuudesta. Alatavoitteena on myös selvittää, mitkä tekijät vaikuttavat standardin kannatukseen ja vastustukseen. Tutkimus on laadullinen. Sen empiirinen aineisto muodostuu kommenttikirjeistä, joita eri Euroopan valtioiden sidosryhmät lähettivät vastauksiksi standardia koskeneeseen EU-komission konsultaatioon. Pk-IFRS:n soveltamispäätöstä tehtäessä on kyse laatijoille koituvien kustannusten ja käyttäjille aiheutuvien hyötyjen tasapainottelusta. Tutkimuksesta käy kuitenkin ilmi, että pk-IFRS ei ole optimaalinen ratkaisu EU:n pk-yrityksiä ja niiden tilinpäätösten käyttäjiä ajatellen. Tilinpäätösten käyttäjät kokevat EU:n tilinpäätösdirektiivien tarjoavan riittävän vertailukelpoisuuden tason. Kansainvälistä liiketoimintaa harjoittavien pk-yritysten kannalta pk-IFRS olisi kuitenkin edullinen vaihtoehto. Standardia kohtaan esitettyihin puoltaviin ja vastustaviin näkökantoihin vaikuttaa oleellisesti se, kuinka paljon valtion kansalliset laskentakäytännöt eroavat pk-IFRS:stä. Standardin vastustajille luonteenomaista on, että ne edustavat kontinentaalisia valtioita, joiden kirjanpidon ja verotuksen välillä on läheinen yhteys. Sidosryhmistä erityisesti tilintarkastusyhteisöt, tilitoimistot yms. laskentaorganisaatiot kannattavat standardia.

Membraanin modifiointi happo- ja alkoholikäsittelyillä

Tässä diplomityössä tutkittiin alkoholilla ja orgaanisella hapolla tehtävien esikäsittelyiden vaikutusta nanosuodatuskalvon ominaisuuksiin. Työn tarkoituksena oli parantaa nanosuodatuskalvon fraktiointiominaisuuksia sekä kasvattaa monosakkaridien suotautuvuutta. Tarkasteluissa käytetty membraani oli GE Osmonicsin valmistamaa Desal-5 DL nanosuodatuskalvoa, jota modifioitiin erilaisilla maitohappo- ja isopropanoliesikäsittelyillä. Suodatukset tehtiin kahdella erilaisella laboratoriomittakaavan levysuotimella käyttäen malliaineina väkevää sokeriliuosta sekä laimeampaa sokeri-suola-liuosta. Happo- ja alkoholiesikäsiteltyjen kalvojen vuo- ja retentioarvoja verrattiin referensseinä käytettyjen vesiliotettujen kalvojen vastaaviin arvoihin. Puhtaat esikäsitellyt kalvot analysoitiin myös tarkemmin kalvoissa tapahtuneiden muutosten ymmärtämiseksi. Suodatusten ja analyysitulosten perusteella sekä alkoholi- että happoesikäsittelyt paransivat nanosuodatuskalvon ominaisuuksia parantaen sokerivuota, heikentämättä kuitenkaan kalvon fraktiointikykyä eri moolimassan omaavien sokereiden suhteen. Hapolla saavutettiin hieman alkoholikäsittelyä suotuisammat muutokset, mutta molemmilla käsittelyillä haluttujen komponenttien retentio monesti jopa parani referenssikalvoon verrattuna. Havaitut muutokset kalvoissa olivat pääosin fysikaalisia, mutta erityisesti happokäsittely muutti kalvon rakennetta myös kemiallisesti. Molemmat käsittelyt lisäsivät myös tarkasteltavan membraanin hydrofiilisuutta.

Transfer of Administrative HR Services to Global Service Center in Poland

Liiketoimintaa tukevien palvelujen etätuotanto edustaa uutta kansainvälistymisen muotoa. Kehittyvien markkinoiden nousu yhdistettynä yritysten arvoketjutoimintojen kansainvälistymiseen on luonut yrityksille kasvavan paineen etsiä parasta sijaintia toiminnoilleen. Monikansalliset yritykset ovat yhä useammin korvanneet paikallisia henkilöstöpalvelujaan siirtymällä globaaliin malliin jaettujen palvelujen tuotannossa. Tämä diplomityö on toteutettu tukeakseen UPM:n henkilöstöhallintoa globaalin palvelukeskuksen perustamisessa Puolaan. Tutkimuksen tavoitteena on laajentaa käsitystä henkilöstöpalvelujen tarjontamallin uudistamiseen johtaneista tekijöistä ja motiiveista. Empiirisen tutkimuksen tärkein tavoite on tukea rekrytoinnin hallinnollisten töiden siirtoa globaaliin palvelukeskukseen palvelun laadun säilyessä vähintään aikaisemmalla tasolla. Tutkimuksen tulokset painottavat strategista näkökulmaa muutokseen. Strategiset syyt UPM:n henkilöstöhallinnon globaalin palvelukeskuksen perustamiselle sisältävät ylikapasiteetin ja päällekkäisten toimintojen vähentämisen eri maissa. Muutos lisää palvelun joustavuutta sekä edesauttaa toiminnan läpinäkyvyyttä, ennustettavuutta ja kustannusten valvontaa. Onnistuneesti toteutetut jaetut palvelut voivat toimia hyvänä lähtökohtana tehokkaiden henkilöstöpalvelujen tuottamiselle.

Acidic dissolution of iron oxides and regeneration of a ceramic filter medium

The dewatering of iron ore concentrates requires large capacity in addition to producing a cake with low moisture content. Such large processes are commonly energy intensive and means to lower the specific energy consumption are needed. Ceramic capillary action disc filters incorporate a novel filter medium enabling the harnessing of capillary action, which results in decreased energy consumption in comparison to traditional filtration technologies. As another benefit, the filter medium is mechanically and chemically more durable than, for example, filter cloths and can, thus, withstand harsh operating conditions and possible regeneration better than other types of filter media. In iron ore dewatering, the regeneration of the filter medium is done through a combination of several techniques: (1) backwashing, (2) ultrasonic cleaning, and (3) acid regeneration. Although it is commonly acknowledged that the filter medium is affected by slurry particles and extraneous compounds, published research, especially in the field of dewatering of mineral concentrates, is scarce. Whereas the regenerative effect of backwashing and ultrasound are more or less mechanical, regeneration with acids is based on chemistry. The chemistry behind the acid regeneration is, naturally, dissolution. The dissolution of iron oxide particles has been extensively studied over several decades but those studies may not necessarily be directly applicable in the regeneration of the filter medium which has undergone interactions with the slurry components. The aim of this thesis was to investigate if free particle dissolution indeed correlates with the regeneration of the filter medium. For this purpose, both free particle dissolution and dissolution of surface adhered particles were studied. The focus was on acidic dissolution of iron oxide particles and on the study of the ceramic filter medium used in the dewatering of iron ore concentrates. The free particle dissolution experiments show that the solubility of synthetic fine grained iron oxide particles in oxalic acid could be explained through linear models accounting for the effects of temperature and acid concentration, whereas the dissolution of a natural magnetite is not so easily explained by such models. In addition, the kinetic experiments performed both support and contradict the work of previous authors: the suitable kinetic model here supports previous research suggesting solid state reduction to be the reaction mechanism of hematite dissolution but the formation of a stable iron oxalate is not supported by the results of this research. Several other dissolution mechanisms have also been suggested for iron oxide dissolution in oxalic acid, indicating that the details of oxalate promoted reductive dissolution are not yet agreed and, in this respect, this research offers added value to the community. The results of the regeneration experiments with the ceramic filter media show that oxalic acid is highly effective in removing iron oxide particles from the surface of the filter medium. The dissolution of those particles did not, however, exhibit the expected behaviour, i.e. complete dissolution. The results of this thesis show that although the regeneration of the ceramic filter medium with acids incorporates the dissolution of slurry particles from the surface of the filter medium, the regeneration cannot be assessed purely based upon free particle dissolution. A steady state, dependent on temperature and on the acid concentration, was observed in the dissolution of particles from the surface even though the limit of solubility of free iron oxide particles had not been reached. Both the regeneration capacity and efficiency, with regards to the removal of iron oxide particles, was found to be temperature dependent, but was not affected by the acid concentration. This observation further suggests that the removal of the surface adhered particles does not follow the dissolution of free particles, which do exhibit a dependency on the acid concentration. In addition, changes in the permeability and in the pore structure of the filter medium were still observed after the bulk concentration of dissolved iron had reached a steady state. Consequently, the regeneration of the filter medium continued after the dissolution of particles from the surface had ceased. This observation suggests that internal changes take place at the final stages of regeneration. The regeneration process could, in theory, be divided into two, possibly overlapping, stages: (1) dissolution of surface-adhered particles, and (2) dissolution of extraneous compounds from within the pore structure. In addition to the fundamental knowledge generated during this thesis, tools to assess the effects of parameters on the regeneration of the ceramic filter medium are needed. It has become clear that the same tools used to estimate the dissolution of free particles cannot be used to estimate the regeneration of a filter medium unless only a robust characterisation of the order of regeneration efficiency is needed.

Paikallisuus osuuspankkien kilpailuetuna - case OP-Pohjola-ryhmän jäsenosuuspankit

Tämä tutkielma osallistuu suomalaiseen osuusliiketoiminnan menestystekijöitä koskevaan akateemiseen keskusteluun. Tutkimuksen tavoitteena on tarkastella paikallisuuden merkitystä OP-Pohjola-ryhmän jäsenosuuspankkien näkökulmasta ja tutustua syvällisemmin pankkiliiketoimintaan ja sen kilpailuetuihin. Tutkimuksessa pyritään selvittämään, mitä paikallisuus on ja miten se ilmenee osuuspankkien liiketoiminnassa. Tutkimuksen tavoitteena on ymmärtää, mitä lisäarvoa paikallisuus antaa osuuspankeille sen kauempaa johdetuiden kilpailijoiden strategioihin verrattuna, ja mitä edellytyksiä osuuspankeilla on selviytyä jatkuvasti kiristyvässä kilpailussa. Tutkimuksen tavoitteisiin pyritään vastaamaan analysoimalla Mika Rantasen osuuspankeista vuonna 2009 keräämää laadullista aineistoa. Tutkimustulokset osoittavat, että osuustoiminnallinen pankkiliiketoiminta ja paikallisuus tukevat toisiaan. Paikallisuus mahdollistaa osuustoiminnan ominaispiirteiden hyödyntämisen ja aikaansaa sen, että osuuspankit koetaan usein kilpailijoitaan läheisemmiksi – osaksi paikallisyhteisöä. Tästä on merkittävä hyöty OP-Pohjola-ryhmän jäsenosuuspankkien liiketoiminnalle.

Building a creative city brand through an international mega-event : Case: Helsinki World Design Capital 2012

In order to grow, cities are increasingly competing for attention, jobs, investments, visitors, residents and significant events. Cities need to come up with creative solutions to keep up with the competition; they ought to become creative cities. Attracting talented and diverse inhabitants is a key factor in developing a creative city, which on is characterized by openness, tolerance, vibrancy and diversity. Along the need for renewed city images city brand building has become popular. Helsinki is the World Design Capital 2012 (WDC 2012) and this mega-event presents a meaningful opportunity for the city to broadcast itself globally. The purpose of this study is to evaluate how Helsinki brands itself as a creative city through an international mega-event. The sub-aims are to: 1) Map the factors behind the creative city and their relation to the city of Helsinki, 2) Describe the city branding process, 3) Evaluate the role of the Helsinki World Design Capital 2012 mega-event in Helsinki’s creative city brand building. First, the theory discusses the concept of the creative city that has gained growing attention during the past decade. Then, the city branding process is described and the benefits of hosting a mega-event are presented. Finally, co-branding a city and a mega-event in order to generate maximum benefit from the mega-event, is reviewed. This is a qualitative research for which data was collected through three face-to-face interviews, the World Design Capital 2012 bid, Helsinki’s economic development strategy, a consulting firm’s research report on the case city and web-pages. The research reveals that Helsinki has shown interest in the creative city discussion. The terminology around the concept is however approached carefully. Helsinki fits many of the creative city characteristics and recognizes its flaws for which improvement strategies have been planned. Bottlenecks keeping the city from promoting a more open mind were mainly revealed in its organizational structures. Helsinki has no official brand strategy; nonetheless pressure to develop one is present. The World Design Capital 2012 mega-event is seen as a meaningful stepping board to strengthen Helsinki’s identity and image, and start thinking about a city brand. The brand strategies of the mega-event support the values and virtues of the city itself, which enables benefits of co-branding introduces in the theory part. Helsinki has no official brand and doesn’t call itself a creative city, however this study shows signs of the city taking steps towards building a creative city brand with the help of the Helsinki World Design Capital 2012 mega-event.

Utilization of Particle Image velocimetry in PPOOLEX condensation experiments

Particle Image Velocimetry, PIV, is an optical measuring technique to obtain velocity information of a flow in interest. With PIV it is possible to achieve two or three dimensional velocity vector fields from a measurement area instead of a single point in a flow. Measured flow can be either in liquid or in gas form. PIV is nowadays widely applied to flow field studies. The need for PIV is to obtain validation data for Computational Fluid Dynamics calculation programs that has been used to model blow down experiments in PPOOLEX test facility in the Lappeenranta University of Technology. In this thesis PIV and its theoretical background are presented. All the subsystems that can be considered to be part of a PIV system are presented as well with detail. Emphasis is also put to the mathematics behind the image evaluation. The work also included selection and successful testing of a PIV system, as well as the planning of the installation to the PPOOLEX facility. Already in the preliminary testing PIV was found to be good addition to the measuring equipment for Nuclear Safety Research Unit of LUT. The installation to PPOOLEX facility was successful even though there were many restrictions considering it. All parts of the PIV system worked and they were found out to be appropriate for the planned use. Results and observations presented in this thesis are a good background to further PIV use.

Capital Structure and Firm Growth: R&D Intensive Companies

The purpose of this study is to examine and explain firm`s growth impact on capital structure decision-making in research and development intensive companies. Many studies claim that R&D has a pivotal impact on capital structure decisions, but corporate finance theories have often failed to explain these observed patterns. As sales growth is an important concept and objective for R&D firms, it is logical to assume that it plays a vital role in capital structure decisions. This study applies nomothetic research approach. The theoretical part employs a formal conceptual analysis in order to develop the propositions that are tested with empirical data. The empirical part consists of the analysis of three companies; the data is obtained from the annual reports over the period 2003 – 2008. The companies operate in IT- or ICT-industry and are publicly listed. The method for analyzing the case data is based on the financial indicators, which are obtained from the financials of the case companies. These economic indicators describe the capital structure and the financial decision-making of the firms. The method relates to the quantitative studies. Yet, this study extends the analysis beyond the indicators. Specifically, this study addresses the question of what is behind the economic indicators, therefore combining aspects of quantitative and qualitative analysis. The firms examined in this study seem to prefer internal finance during growth. However, external finance seems to be a catalyst for sales growth. Firms strongly prefer equity financing. In growth, the use of equity per capital either increases or stays in a constant level. Over the period 2003 – 2008, the firms were often associated to equity related transactions and short-term debt. Short-term debt was used as a substitute of long-term debt and equity. The case firms also adjusted their capital structure – these adjustments were carried out with short-term debt or equity. The case data also provides implications for the growth signal theory that was developed in this study. Based on the econometric indicators, arguments can be made that equity investors are `attracted` to growing R&D firms. This is because growth helps investors perceive the true type of firm. The findings of this study are best explained by the trade-off theory and the pecking order theory. These corporate finance theories are considered as mainstream. Little support can be found to the implications of the signaling theory and market timing theory.

Anatomical and histological characteristics of teeth in agouti (Dasyprocta prymnolopha Wagler, 1831)

The agouti species Dasyprocta prymnolopha (D. prymnolopha) is a medium-sized rodent, diurnal, and characteristic of northeastern Brazil, south of the Amazon. Several studies have been made on these rodents. However, there is a lack of analysis of masticatory system, in particular morphology of the teeth. Thus, this research seeks to describe anatomical and histological aspects of the agouti teeth. For this purpose, we used adult agouti, in which measurements and descriptions of teeth and dental tissues were made. It was observed that the dental arch of D. prymnolopha comprises of twenty teeth, evenly distributed in the upper and lower arch, being inferior teeth larger than their corresponding higher. The incisors are larger, and between the posterior premolars and molars, there is a gradual increase in length in the anterior-posterior arch. In microscopic examination, a prismatic appearance was observed consisting of enamel prisms arranged in different directions, behind the enamel and dentin with standard tubular dentinal tubules with variable diameter and far between, also showing a sinuous path from the inner portion to the junction with more superficial enamel. Morphological analysis of dental tissues showed that an enamel with structural organization adapted to the act of chewing and high impact dentin compatible with standard tubular function resilience and mechanical damping of masticatory forces, as found in larger animals, confirming the understanding of eating habits that define much of its ecological functions within the ecosystem they inhabit.

Key factors in transforming university internationalization into commercial activity in Finland. Case of University of Turku

Globalization, developments in ICT, emergence of knowledge society and other changes have reformed the environment for international higher education during the past few decades. Consequently, higher education sector has moved towards more marketing-oriented system, and universities have started to undertake commercial activities as part of their internationalization. This development has emerged to Finland as well, which forms the basis for this study. The purpose is to examine commercialization in Finnish university landscape and to investigate the ways Finnish university could capitalize its international activities and educational knowledge for export. The research question of the study is: What are the key factors in transforming university internationalization into commercial activity in the Finnish university landscape? The main problem is further divided into three sub-questions: 1) How can a university internationalize; 2) what are the motivational factors behind university internationalization and commercialization; and 3) how can higher education be developed into export services and products? The research was conducted as a qualitative case study of University of Turku. Methods used for gathering and examining data were interviewing and document analysis. Primary data was collected through four individual semi-structured interviews, which were conducted face-to-face. Secondary data that included reports, articles and electronic materials such as university web pages, was used to complement the primary data. The results were analyzed by theming the data into three broader categories of internationalization activities; drivers and motivations and; education export activities. After the data was organized in themes, analysis continued by comparing different parts of data and finding patterns that would explain the phenomenon in Finnish universities. According to the empirical data, University of Turku is currently on the growth state of internationalization with strategies such as internationalization of curriculum, establishment of international research groups, mobility of students and academics, international networking and support services. Commercialization phenomenon is still rather new to the case university, but it has already developed educational products and services for export. The study concludes that university internationalization cannot be directly transformed into commercial activities in the Finnish context, but the universities need to be active in actually creating educational products. The key factors found in this study include: 1) the Finnish government policies behind the current hype of export education; 2) the potential and knowledge capacity of universities for exports; 3) need for additional profits; 4) further internationalization through commercial activities; 5) recognizing and exploiting the specific areas of strength and 6) establishing of cooperative partnerships for better products.

Kuntasektorin toimintojen yhtiöittäminen – taustalla NPM-doktriini ja lakimuutokset

Tutkielman tavoitteena on ensinnäkin selvittää, miten New Public Management (NPM) -doktriini ja muutokset yksityisen ja julkisen sektorin välistä kilpailuneutraliteettiongelmaa korjaavassa lainsäädännössä ovat vaikuttaneet kuntien toimintojen yhtiöittämiseen. Toisena tutkimuksen kohteena on selvittää erilaiset tavat yhtiöittää liiketoimintoja sekä niiden valintaan vaikuttavat tekijät. Empiirinen osio on toteutettu kvalitatiivisella ja deskriptiivisellä tutkimusmetodologialla. Yhtiöittämisiä tarkastellaan tapaustutkimuksina, johon on valittu tarkemman tutkimuksen kohteeksi kaksi toimialaa: tilahallinto ja satamateollisuus. Kyseisten yhtiöittämistapausten avulla pyritään tuomaan monipuolisesti esille erilaisia yhtiöittämisen taustatekijöitä ja yhtiöittämistapoja. On varsin helppo havaita ne tapaukset, joissa yhtiöittämisen taustalla on ollut tulevaan yhtiöittämisvelvollisuuteen varautuminen. Tähän ryhmään kuuluvat muun muassa lähes kaikki kuntien liikelaitosmuodossa toimivat satamat. Puolestaan kaikki tehokkuuteen, päätöksenteon nopeutumiseen ja muihin liikemaailmasta omaksuttuihin elementteihin perustuvat tavoitteet yhtiöittämisen taustalla on pääsääntöisesti helppo luokitella NPM-doktriiniin liittyviksi. Kuntien tilahallinnot kuuluvat tähän ryhmään, koska niitä ei pääsääntöisesti koske yhtiöittämisvelvollisuus. Yhtiöittämisessä on otettava huomioon useita eri aspekteja, ja myös yhtiöittämistapojen välillä on huomattavia eroja. Tämän vuoksi on tarpeen kartoittaa kaikki kulloiseenkin tilanteeseen vaikuttavat tekijät, jotta voidaan löytää optimaalisin yhtiöittämistapa.

Suomen peliteollisuuden kasvu ja kansainvälistyminen

Suomen peliteollisuus on ollut erittäin puhuttu aihe mediassa viime vuosien ajan. Työmme pyrkii selvittämään Suomen peliteollisuuden kasvun ja kansainvälistymisprosessin taustalla olleita tekijöitä sekä niiden suhteita toisiinsa. Työssä keskitytään analysoimaan jo tapahtunutta kasvua ja kansainvälistymistä, joiden tarkastelussa käytetään hyväksi Porterin jalostamaa Klusteri -teoriaa sekä kasvuyritysten uutta kansainvälistymisilmiötä, Born Global -teoriaa. Suomen peliteollisuuden klusterista esitetään hahmotelma pelialan kattavan kokonaiskuvan rakentamiseksi. Lopuksi kootaan havaintoja ja johtopäätöksiä Suomen peliteollisuusalan kasvuprosessista eri aikakausilta sekä analysoidaan kansainvälistymisprosessin kulkua ja metodologiaa. Myös näkemyksiä Suomen peliteollisuuden tulevaisuudesta esitetään. Suomen peliteollisuuden kasvua arvioidessa voidaan havaita, että sen kasvunopeus on lisääntynyt huomattavasti viimeisen muutaman vuoden aikana. Alan yritysten kasvu painottuu erittäin vahvasti globaaleille markkinoille. Peliteollisuus on kuitenkin edelleen erittäin pieni teollisuudenala Suomessa. Tulevaisuudessa sen koko ja merkitys tulevat kasvamaan, ja varsinkin Suomen mobiilipeliteollisuuden tulevaisuus näyttää valoisalta.

A Model-Based Development and Verification Framework for Distributed System-on-Chip Architecture

The capabilities and thus, design complexity of VLSI-based embedded systems have increased tremendously in recent years, riding the wave of Moore’s law. The time-to-market requirements are also shrinking, imposing challenges to the designers, which in turn, seek to adopt new design methods to increase their productivity. As an answer to these new pressures, modern day systems have moved towards on-chip multiprocessing technologies. New architectures have emerged in on-chip multiprocessing in order to utilize the tremendous advances of fabrication technology. Platform-based design is a possible solution in addressing these challenges. The principle behind the approach is to separate the functionality of an application from the organization and communication architecture of hardware platform at several levels of abstraction. The existing design methodologies pertaining to platform-based design approach don’t provide full automation at every level of the design processes, and sometimes, the co-design of platform-based systems lead to sub-optimal systems. In addition, the design productivity gap in multiprocessor systems remain a key challenge due to existing design methodologies. This thesis addresses the aforementioned challenges and discusses the creation of a development framework for a platform-based system design, in the context of the SegBus platform - a distributed communication architecture. This research aims to provide automated procedures for platform design and application mapping. Structural verification support is also featured thus ensuring correct-by-design platforms. The solution is based on a model-based process. Both the platform and the application are modeled using the Unified Modeling Language. This thesis develops a Domain Specific Language to support platform modeling based on a corresponding UML profile. Object Constraint Language constraints are used to support structurally correct platform construction. An emulator is thus introduced to allow as much as possible accurate performance estimation of the solution, at high abstraction levels. VHDL code is automatically generated, in the form of “snippets” to be employed in the arbiter modules of the platform, as required by the application. The resulting framework is applied in building an actual design solution for an MP3 stereo audio decoder application.