DIRECT NUMERICAL SIMULATION OF INCOMPRESSIBLE MULTIPHASE FLOW WITH PHASE CHANGE

Phase change problems arise in many practical applications such as air-conditioning and refrigeration, thermal energy storage systems and thermal management of electronic devices. The physical phenomenon in such applications are complex and are often difficult to be studied in detail with the help of only experimental techniques. The efforts to improve computational techniques for analyzing two-phase flow problems with phase change are therefore gaining momentum. The development of numerical methods for multiphase flow has been motivated generally by the need to account more accurately for (a) large topological changes such as phase breakup and merging, (b) sharp representation of the interface and its discontinuous properties and (c) accurate and mass conserving motion of the interface. In addition to these considerations, numerical simulation of multiphase flow with phase change introduces additional challenges related to discontinuities in the velocity and the temperature fields. Moreover, the velocity field is no longer divergence free. For phase change problems, the focus of developmental efforts has thus been on numerically attaining a proper conservation of energy across the interface in addition to the accurate treatment of fluxes of mass and momentum conservation as well as the associated interface advection. Among the initial efforts related to the simulation of bubble growth in film boiling applications the work in \cite{Welch1995} was based on the interface tracking method using a moving unstructured mesh. That study considered moderate interfacial deformations. A similar problem was subsequently studied using moving, boundary fitted grids \cite{Son1997}, again for regimes of relatively small topological changes. A hybrid interface tracking method with a moving interface grid overlapping a static Eulerian grid was developed \cite{Juric1998} for the computation of a range of phase change problems including, three-dimensional film boiling \cite{esmaeeli2004computations}, multimode two-dimensional pool boiling \cite{Esmaeeli2004} and film boiling on horizontal cylinders \cite{Esmaeeli2004a}. The handling of interface merging and pinch off however remains a challenge with methods that explicitly track the interface. As large topological changes are crucial for phase change problems, attention has turned in recent years to front capturing methods utilizing implicit interfaces that are more effective in treating complex interface deformations. The VOF (Volume of Fluid) method was adopted in \cite{Welch2000} to simulate the one-dimensional Stefan problem and the two-dimensional film boiling problem. The approach employed a specific model for mass transfer across the interface involving a mass source term within cells containing the interface. This VOF based approach was further coupled with the level set method in \cite{Son1998}, employing a smeared-out Heaviside function to avoid the numerical instability related to the source term. The coupled level set, volume of fluid method and the diffused interface approach was used for film boiling with water and R134a at the near critical pressure condition \cite{Tomar2005}. The effect of superheat and saturation pressure on the frequency of bubble formation were analyzed with this approach. The work in \cite{Gibou2007} used the ghost fluid and the level set methods for phase change simulations. A similar approach was adopted in \cite{Son2008} to study various boiling problems including three-dimensional film boiling on a horizontal cylinder, nucleate boiling in microcavity \cite{lee2010numerical} and flow boiling in a finned microchannel \cite{lee2012direct}. The work in \cite{tanguy2007level} also used the ghost fluid method and proposed an improved algorithm based on enforcing continuity and divergence-free condition for the extended velocity field. The work in \cite{sato2013sharp} employed a multiphase model based on volume fraction with interface sharpening scheme and derived a phase change model based on local interface area and mass flux. Among the front capturing methods, sharp interface methods have been found to be particularly effective both for implementing sharp jumps and for resolving the interfacial velocity field. However, sharp velocity jumps render the solution susceptible to erroneous oscillations in pressure and also lead to spurious interface velocities. To implement phase change, the work in \cite{Hardt2008} employed point mass source terms derived from a physical basis for the evaporating mass flux. To avoid numerical instability, the authors smeared the mass source by solving a pseudo time-step diffusion equation. This measure however led to mass conservation issues due to non-symmetric integration over the distributed mass source region. The problem of spurious pressure oscillations related to point mass sources was also investigated by \cite{Schlottke2008}. Although their method is based on the VOF, the large pressure peaks associated with sharp mass source was observed to be similar to that for the interface tracking method. Such spurious fluctuation in pressure are essentially undesirable because the effect is globally transmitted in incompressible flow. Hence, the pressure field formation due to phase change need to be implemented with greater accuracy than is reported in current literature. The accuracy of interface advection in the presence of interfacial mass flux (mass flux conservation) has been discussed in \cite{tanguy2007level,tanguy2014benchmarks}. The authors found that the method of extending one phase velocity to entire domain suggested by Nguyen et al. in \cite{nguyen2001boundary} suffers from a lack of mass flux conservation when the density difference is high. To improve the solution, the authors impose a divergence-free condition for the extended velocity field by solving a constant coefficient Poisson equation. The approach has shown good results with enclosed bubble or droplet but is not general for more complex flow and requires additional solution of the linear system of equations. In current thesis, an improved approach that addresses both the numerical oscillation of pressure and the spurious interface velocity field is presented by featuring (i) continuous velocity and density fields within a thin interfacial region and (ii) temporal velocity correction steps to avoid unphysical pressure source term. Also I propose a general (iii) mass flux projection correction for improved mass flux conservation. The pressure and the temperature gradient jump condition are treated sharply. A series of one-dimensional and two-dimensional problems are solved to verify the performance of the new algorithm. Two-dimensional and cylindrical film boiling problems are also demonstrated and show good qualitative agreement with the experimental observations and heat transfer correlations. Finally, a study on Taylor bubble flow with heat transfer and phase change in a small vertical tube in axisymmetric coordinates is carried out using the new multiphase, phase change method.

Electrolytes for ceramic oxide fuel cells

The main objective of this dissertation is the development and processing of novel ionic conducting ceramic materials for use as electrolytes in proton or oxide-ion conducting solid oxide fuel cells. The research aims to develop new processing routes and/or materials offering superior electrochemical behavior, based on nanometric ceramic oxide powders prepared by mechanochemical processes. Protonic ceramic fuel cells (PCFCs) require electrolyte materials with high proton conductivity at intermediate temperatures, 500-700ºC, such as reported for perovskite zirconate oxides containing alkaline earth metal cations. In the current work, BaZrO3 containing 15 mol% of Y (BZY) was chosen as the base material for further study. Despite offering high bulk proton conductivity the widespread application of this material is limited by its poor sinterability and grain growth. Thus, minor additions of oxides of zinc, phosphorous and boron were studied as possible sintering additives. The introduction of ZnO can produce substantially enhanced densification, compared to the un-doped material, lowering the sintering temperature from 1600ºC to 1300ºC. Thus, the current work discusses the best solid solution mechanism to accommodate this sintering additive. Maximum proton conductivity was shown to be obtained in materials where the Zn additive is intentionally adopted into the base perovskite composition. P2O5 additions were shown to be less effective as a sintering additive. The presence of P2O5 was shown to impair grain growth, despite improving densification of BZY for intermediate concentrations in the range 4 – 8 mol%. Interreaction of BZY with P was also shown to have a highly detrimental effect on its electrical transport properties, decreasing both bulk and grain boundary conductivities. The densification behavior of H3BO3 added BaZrO3 (BZO) shows boron to be a very effective sintering aid. Nonetheless, in the yttrium containing analogue, BaZr0.85Y0.15O3- (BZY) the densification behavior with boron additives was shown to be less successful, yielding impaired levels of densification compared to the plain BZY. This phenomenon was shown to be related to the undesirable formation of barium borate compositions of high melting temperatures. In the last section of the work, the emerging oxide-ion conducting materials, (Ba,Sr)GeO3 doped with K, were studied. Work assessed if these materials could be formed by mechanochemical process and the role of the ionic radius of the alkaline earth metal cation on the crystallographic structure, compositional homogeneity and ionic transport. An abrupt jump in oxide-ion conductivity was shown on increasing operation temperature in both the Sr and Ba analogues.

The influence of past behavior on future behavior: a mind-set perspective

A behavioral mind-set refers to the effect of performing a behavior in one situation (e.g., deciding which animals jump higher, dolphins or sea lions) on the likelihood of performing a conceptually similar behavior in subsequent, unrelated situations (e.g., deciding which of two candies to purchase). It reflects the activation and persistence of procedural knowledge. My dissertation circumscribes the construct of a behavioral mind-set and proposes a theoretical framework describing how mind-sets operate as well as their cognitive and motivational determinants. Three sets of studies investigated the role of mind-sets in different domains. The first set of studies explored the influence of making comparative judgments on subsequent decision making. Specifically, I found that making comparative judgment in one situation activates a which-to-buy mind-set that increases the willingness to decide which of two products to purchase in a later situation without considering the option of not buying anything at all. This mind-set can be activated not only by stating preferences for one of two products but also by comparing the relative attractiveness of wild animals, comparing the animals with respect to physical attributes, and estimating how similar one object is to another. Furthermore, the mind-set, once activated, influences not only purchase intentions in hypothetical situations but the actual decisions to purchase one of different types of products that are on sale after the experiment. The second set of studies investigated whether generating supportive elaborations or counterarguments in one situation will influence people’s tendency to engage in similar behavior in a subsequent, unrelated situation. I found that making supportive elaborations in one situation gives rise to a bolstering mind-set that, once activated, increases participants’ disposition to generate supportive thoughts in response to persuasive communications that they receive later and, therefore, increases the effectiveness of persuasion. Correspondingly, generating opposing arguments in an initial situation activates a counterarguing mind-set that increases the tendency to argue against the persuasive communications and decreases its effectiveness. However, a counterarguing mind-set may increase the effectiveness of persuasion if the messages are difficult to be refuted. The third set of studies distinguished between the influence of motivation on consumer behavior and the influence of a mind-set that is activated by this motivation. Specifically, I found that appetitive motivation, which naturally increases people’s tendency to acquire food products, can give rise to a cognition-based acquisition mind-set that increases people’s disposition to acquire non-food products as well. This acquisition mind-set may persist even when the appetitive motivation that gave rise to it is satiated by eating. Moreover, the disposition to acquire non-food products is not mediated by the products’ attractiveness. The studies suggest that motivation and mind-sets may independently influence consumers’ evaluation of a product and their dispositions to acquire it. Motivation is more likely to influence product evaluations whereas a mind-set is more likely to influence consumers’ acquisition dispositions. In summary, a behavioral mind-set can be activated in the process of performing a behavior. And the mind-set may influence people’s subsequent behaviors in unrelated situations in which the activated procedure is applicable. Moreover, motivation to engage in one behavior could also elicit a cognition-based mind-set, which may change people’s subsequent behaviors.

Strong quantum memory at resonant Fermi edges revealed by shot noise

Studies of non-equilibrium current fluctuations enable assessing correlations involved in quantum transport through nanoscale conductors. They provide additional information to the mean current on charge statistics and the presence of coherence, dissipation, disorder, or entanglement. Shot noise, being a temporal integral of the current autocorrelation function, reveals dynamical information. In particular, it detects presence of non-Markovian dynamics, i.e., memory, within open systems, which has been subject of many current theoretical studies. We report on low-temperature shot noise measurements of electronic transport through InAs quantum dots in the Fermi-edge singularity regime and show that it exhibits strong memory effects caused by quantum correlations between the dot and fermionic reservoirs. Our work, apart from addressing noise in archetypical strongly correlated system of prime interest, discloses generic quantum dynamical mechanism occurring at interacting resonant Fermi edges.

Vazão em soleiras controladas ou não por comportas

Os controladores de caudal, normalmente implementados em sistemas Supervisory control and data acquisition (SCADA), apresentam uma grande relevância no controlo automático de canais de adução. Para garantir que os controladores de caudal sejam fiáveis em todo o seu domínio de funcionamento (em situações de escoamento com ressalto livre ou submerso e de transição entre escoamentos com ressalto livre e ressalto submerso) foram comparados os resultados dos ensaios experimentais com diferentes métodos de cálculo da vazão em comportas e/ou sobre soleiras. O programa de ensaios foi realizado nos canais laboratorial e experimental da Universidade de Évora. Foram realizados ensaios em comportas planas verticais e em soleiras do tipo Waterways Experiment Station (WES) controladas ou não por comportas planas verticais. Em ambos os casos, foram contempladas as situações de escoamento com ressalto livre e submerso. Os resultados obtidos mostram que: a) para as comportas, o método Rajaratnam e Subramanya (1967a) conduz a bons resultados com um erro percentual médio absoluto MAPE < 1% para o escoamento com ressalto livre e MAPE < 4% para o submerso; a transição entre escoamentos foi identificada corretamente por este método; b) para as soleiras, obtiveram-se bons resultados para o escoamento com ressalto livre para o método USACE (1987), com MAPE < 2%, e para o submerso através do método Alves e Martins (2011), com MAPE < 5%; a transição entre escoamentos pode ser considerada adequada de acordo com a curva experimental de Grace (1963); c) para soleiras controladas por comporta, conseguiram-se bons resultados para o escoamento com ressalto livre recorrendo à equação dos orifícios de pequenas dimensões, com MAPE < 1, 5%, e para o submerso com a equação dos orifícios totalmente submersos com MAPE < 1, 6%; em ambos os casos foi necessária calibração do coeficiente de vazão; a transição entre escoamentos foi adequada pelo método de Grace (1963). Com base nos resultados obtidos, foi possível definir um algoritmo de vazão generalizado para comportas e/ou soleiras que permite a determinação da vazão para as situações de escoamento com ressalto livre e submerso incluindo a transição entre escoamentos; ABSTRACT: Flow controllers, usually implemented in Supervisory Control and Data Acquisition (SCADA) systems, are very important in the automatic control of irrigation canal systems. To ensure that flow controllers are reliable for the entire operating range (free or submerged flow and flow transitions) the experimental results were compared with different methods of flow measurement for gates and/or weirs. The test program was conducted in the laboratory flume and in the automatic canal of the University of ´Evora. Tests were carried in sluice gates and in broad-crested weirs controlled or not by sluice gate. In both cases free and submerged flow conditions were analyzed. The results show that: a) for the sluice gates, the method of Rajaratnam e Subramanya (1967a) leads to good results with a mean absolute percentage error (MAPE) < 1% for free flow and MAPE < 4% for submerged flow. The transition between flows is correctly identified by this method; b) for the uncontrolled weir, good results were obtained for free flow with the method USACE (1987) with MAPE < 2%, and for submerged flow by the method Alves e Martins (2011) with MAPE < 5%. The transition between flows can be accurately defined by the experimental curve of Grace (1963); c) for the controlled weir, good results were achieved for the free flow with the small orifice equation with MAPE < 1.5% and for submerged flow with the submerged orifice equation with MAPE < 1.6%; in both cases the calibration of the discharge coefficient is needed. The transition between flows can be accomplished through Grace (1963) method. Based on the obtained results, it was possible to define a generalized flow algorithm for gates and/or weirs that allows flow determination for free and submerged flow conditions including the transition between flows.

Finite difference calculations of permeability in large domains in a wide porosity range.

Determining effective hydraulic, thermal, mechanical and electrical properties of porous materials by means of classical physical experiments is often time-consuming and expensive. Thus, accurate numerical calculations of material properties are of increasing interest in geophysical, manufacturing, bio-mechanical and environmental applications, among other fields. Characteristic material properties (e.g. intrinsic permeability, thermal conductivity and elastic moduli) depend on morphological details on the porescale such as shape and size of pores and pore throats or cracks. To obtain reliable predictions of these properties it is necessary to perform numerical analyses of sufficiently large unit cells. Such representative volume elements require optimized numerical simulation techniques. Current state-of-the-art simulation tools to calculate effective permeabilities of porous materials are based on various methods, e.g. lattice Boltzmann, finite volumes or explicit jump Stokes methods. All approaches still have limitations in the maximum size of the simulation domain. In response to these deficits of the well-established methods we propose an efficient and reliable numerical method which allows to calculate intrinsic permeabilities directly from voxel-based data obtained from 3D imaging techniques like X-ray microtomography. We present a modelling framework based on a parallel finite differences solver, allowing the calculation of large domains with relative low computing requirements (i.e. desktop computers). The presented method is validated in a diverse selection of materials, obtaining accurate results for a large range of porosities, wider than the ranges previously reported. Ongoing work includes the estimation of other effective properties of porous media.

Comparação de diferentes tipos de exercício na composição corporal e força em jovens desportistas do sexo feminino

O estudo pretende comparar o efeito de diferentes tipos de exercício físico na composição corporal e força em jovens desportistas do sexo feminino. A amostra foi constituída por vinte e seis desportistas femininas com idades compreendidas entre os 16 e 21 anos. Previamente ao início do estudo foram sujeitas ao 1º momento de avaliação, e após vinte e quatro semanas realizaram o segundo e ultimo momento de avaliação. Os parâmetros avaliados foram a composição corporal através da técnica de absorciometria radiológica de dupla energia; a força isocinética, nomeadamente os momentos de força (peak-torques) e rácios nos músculos extensores e flexores do joelho; a potência muscular nos membros inferiores através dos saltos verticais Squat jump e Countermovement jump. Posteriormente foram separadas em quatro grupos, grupo natação e exercício vibratório (NAT EV; n= 6), grupo natação (NAT; n=6), grupo futsal (FUTS; n= 6) e o grupo de controlo (CONT; n= 8). O grupo (NAT/EV), participou num programa de exercício vibratório (EV), três sessões por semana complementar ao treino de natação. O grupo de (NAT) cumpriu o plano de treino correspondente à disciplina, o grupo de (FUTS) cumpriu o treino referente à respetiva modalidade, o grupo controlo (CONT) realizou somente os exercícios físicos inerentes às aulas de educação física na escola. Resultados: Nas comparações inter grupos, verificou-se no grupo FUTS um aumento de 0,1 (g/m2) ± 0,0 nos valores da DMO-PE, quando comparado com o grupo de CONT, nas comparações intra grupo o grupo de NAT EV registou um acréscimo de 0,1 (g/m2) ± 0,1 nos valores da DMO-TC. Em conclusão, os resultados obtidos sugerem que a modalidade de FUTS promoveu mais alterações na composição corporal, nomeadamente na DMO-PE, no entanto dados conseguidos pelo grupo de NAT EV sugerem que o exercício vibratório poderá influenciar positivamente o incremento da DMO; ABSTRACT: The objective of this study was to compare the effect of different types of exercise on body composition and strength in young female athletes. The sample consisted of twenty-six female athletes aged between 16 and 21. Before the study there was a 1st evaluation point, after twenty-four weeks there was the 2nd and final evaluation. We evaluated body composition through x-ray absorptiometry technique of dual energy, isokinetic strength, including the peak-torques and ratios in the extensor and flexor muscles of the knee; the muscle power in the lower limbs was evaluatated through the vertical jumps Squat jump and countermovement jump. During the study they were separated into four groups, swimming exercise group and vibration (NAT EV; n = 6), swimming group (NAT; n= 6), footsal group (FUTS; n= 6) and control group (CONT; n= 8). The NAT/EV group, participated in a vibrating exercise program (EV), complementary to swimming training, with three sessions per week. The NAT group fulfilled the corresponding swimming workout plan, FUTS group fulfilled the training related to futsal, the CONT group only performed the usual exercises in physical education classes at school. Results: In intergroup comparisons, there was an increase in FUTS group of 0.1 (g / m2) ± 0.0 in the values of MBD-PE, when compared with the CONT group comparisons in intra-group group NAT EV increased by 0.1 (g / m2) ± 0.1 in BMD-TC values. In conclusion, the results suggest that FUTS group promoted more changes in body composition, particularly in BMD-PE, but data obtained by NAT EV group suggest that vibration exercise can positively influence the increase in BMD.

Associações entre a potência muscular dos membros inferiores e a saúde óssea avaliada através de ultrassonografia quantitativa

Objetivo: Analisar as associações entre a potência muscular dos membros inferiores e a saúde óssea avaliada através de ultrassonografia quantitativa. Métodos: A amostra incluiu 63 crianças de 9 anos de idade. A velocidade de som (VS) do rádio e da tíbia foi avaliada através de ultrassonografia quantitativa, a potência de salto foi estimada a partir de um salto vertical com contramovimento e a maturidade somática foi determinada a partir da estimação do pico de velocidade em altura. O estado geral de saúde e o historial de fraturas foram avaliados através de questionário. As associações entre medidas dos parâmetros ósseos e a potência de salto foram analisadas através de correlações bivariadas, com as variáveis expressas em valores absolutos e relativos (estandardizados). Resultados: Foram observadas associações positivas entre a maturidade somática e a potência de salto expressa tanto em valores absolutos como relativos (p <0,05). A maturidade somática correlacionou-se ainda positivamente com a VS da tíbia nas raparigas (r=0,358, p=0,045), enquanto nos rapazes se verificou uma associação negativa, embora não significativa (r=-0,290, p=0,126). Observou-se uma associação ou propensão para associação negativa entre a VS da tíbia e a potência de salto nos rapazes (r=-0,490, p=0,007) e nas raparigas (r=-0,344, p=0,054). Conclusão: A potência de salto não parece constituir um bom marcador da saúde óssea de rapazes e raparigas de 9 anos de idade quando avaliada através de ultrassom.

Design de comunicação aplicado à educação musical

Dissertação de Mestrado para obtenção do grau de Mestre em Design de Comunicação, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

A State of War: Florida from 1939 to 1945

World War II profoundly impacted Florida. The military geography of the State is essential to an understanding the war. The geostrategic concerns of place and space determined that Florida would become a statewide military base. Florida’s attributes of place such as climate and topography determined its use as a military academy hosting over two million soldiers, nearly 15 percent of the GI Army, the largest force theUS ever raised. One-in-eight Floridians went into uniform. Equally,Florida’s space on the planet made it central for both defensive and offensive strategies. The Second World War was a war of movement, and Florida was a major jump off point forUSforce projection world-wide, especially of air power. Florida’s demography facilitated its use as a base camp for the assembly and engagement of this military power. In 1940, less than two percent of the US population lived in Florida, a quiet, barely populated backwater of the United States.[1] But owing to its critical place and space, over the next few years it became a 65,000 square mile training ground, supply dump, and embarkation site vital to the US war effort. Because of its place astride some of the most important sea lanes in the Atlantic World,Florida was the scene of one of the few Western Hemisphere battles of the war. The militarization ofFloridabegan long before Pearl Harbor. The pre-war buildup conformed to theUSstrategy of the war. The strategy of theUS was then (and remains today) one of forward defense: harden the frontier, then take the battle to the enemy, rather than fight them inNorth America. The policy of “Europe First,” focused the main US war effort on the defeat of Hitler’sGermany, evaluated to be the most dangerous enemy. In Florida were established the military forces requiring the longest time to develop, and most needed to defeat the Axis. Those were a naval aviation force for sea-borne hostilities, a heavy bombing force for reducing enemy industrial states, and an aerial logistics train for overseas supply of expeditionary campaigns. The unique Florida coastline made possible the seaborne invasion training demanded for USvictory. The civilian population was employed assembling mass-produced first-generation container ships, while Floridahosted casualties, Prisoners-of-War, and transient personnel moving between the Atlantic and Pacific. By the end of hostilities and the lifting of Unlimited Emergency, officially on December 31, 1946, Floridahad become a transportation nexus. Florida accommodated a return of demobilized soldiers, a migration of displaced persons, and evolved into a modern veterans’ colonia. It was instrumental in fashioning the modern US military, while remaining a center of the active National Defense establishment. Those are the themes of this work. [1] US Census of Florida 1940. Table 4 – Race, By Nativity and Sex, For the State. 14.

Staphylococcus aureus CC398: host adaptation and emergence of methicillin resistance in livestock

UNLABELLED Since its discovery in the early 2000s, methicillin-resistant Staphylococcus aureus (MRSA) clonal complex 398 (CC398) has become a rapidly emerging cause of human infections, most often associated with livestock exposure. We applied whole-genome sequence typing to characterize a diverse collection of CC398 isolates (n = 89), including MRSA and methicillin-susceptible S. aureus (MSSA) from animals and humans spanning 19 countries and four continents. We identified 4,238 single nucleotide polymorphisms (SNPs) among the 89 core genomes. Minimal homoplasy (consistency index = 0.9591) was detected among parsimony-informative SNPs, allowing for the generation of a highly accurate phylogenetic reconstruction of the CC398 clonal lineage. Phylogenetic analyses revealed that MSSA from humans formed the most ancestral clades. The most derived lineages were composed predominantly of livestock-associated MRSA possessing three different staphylococcal cassette chromosome mec element (SCCmec) types (IV, V, and VII-like) including nine subtypes. The human-associated isolates from the basal clades carried phages encoding human innate immune modulators that were largely missing among the livestock-associated isolates. Our results strongly suggest that livestock-associated MRSA CC398 originated in humans as MSSA. The lineage appears to have undergone a rapid radiation in conjunction with the jump from humans to livestock, where it subsequently acquired tetracycline and methicillin resistance. Further analyses are required to estimate the number of independent genetic events leading to the methicillin-resistant sublineages, but the diversity of SCCmec subtypes is suggestive of strong and diverse antimicrobial selection associated with food animal production. IMPORTANCE Modern food animal production is characterized by densely concentrated animals and routine antibiotic use, which may facilitate the emergence of novel antibiotic-resistant zoonotic pathogens. Our findings strongly support the idea that livestock-associated MRSA CC398 originated as MSSA in humans. The jump of CC398 from humans to livestock was accompanied by the loss of phage-carried human virulence genes, which likely attenuated its zoonotic potential, but it was also accompanied by the acquisition of tetracycline and methicillin resistance. Our findings exemplify a bidirectional zoonotic exchange and underscore the potential public health risks of widespread antibiotic use in food animal production.

Descriptive analysis of the test of everyday attention for children in a Spanish normative sample

Introduction. Test of Everyday Attention for Children (TEA-Ch) has been validated in different countries demonstrating that it is an instrument with a correct balance between reliability and duration. Given the shortage of trustworthy instruments of evaluation in our language for infantile population we decide to explore the Spanish version of the TEA-Ch. Methods. We administered TEA-Ch (version A) to a sample control of 133 Spanish children from 6 to 11 years enrolled in school in the Community of Madrid. Four children were selected at random by course of Primary Education, distributing the sex of equivalent form. Descriptive analysis and comparison by ages and sex in each of the TEA-Ch's subtests were conducted to establish a profile of the sample. In order to analyze the effect of the age, subjects were grouped in six sub-samples: 6, 7, 8, 9, 10 and 11 years-old. Results. This first descriptive analysis demonstrates age exerted a significant effect on each measure, due to an important "jump" in children's performance between 6 and 7 years-old. The effect of sex was significant only in two visual attention measures (Sky Search & Map) and interaction age and sex exerted a significant effect only in the dual task (Score DT). Conclusions. The results suggest that the Spanish version of the TEA-Ch (A) might be a useful instrument to evaluate attentional processes in Spanish child population.

Reconstructing the last interglacial at Summit, Greenland: Insights from GISP2

The Eemian (last interglacial, 130-115 ka) was likely the warmest of all interglacials of the last 800 ka, with summer Arctic temperatures 3-5 degrees C above present. Here, we present improved Eemian climate records from central Greenland, reconstructed from the base of the Greenland Ice Sheet Project 2 (GISP2) ice core. Our record comes from clean, stratigraphically disturbed, and isotopically warm ice from 2,750 to 3,040 m depth. The age of this ice is constrained by measuring CH_4 and delta O^18 of O_2, and comparing with the historical record of these properties from the North Greenland Ice Core Project (NGRIP) and North Greenland Eemian Ice Drilling (NEEM) ice cores. The d^18 O_ice, d^15N of N_2, and total air content for samples dating discontinuously from 128 to 115 ka indicate a warming of similar to 6 degrees C between 127-121 ka, and a similar elevation history between GISP2 and NEEM. The reconstructed climate and elevation histories are compared with an ensemble of coupled climate-ice-sheet model simulations of the Greenland ice sheet. Those most consistent with the reconstructed temperatures indicate that the Greenland ice sheet contributed 5.1 m (4.1-6.2 m, 95% credible interval) to global eustatic sea level toward the end of the Eemian. Greenland likely did not contribute to anomalously high sea levels at ~127 ka, or to a rapid jump in sea level at ~120 ka. However, several unexplained discrepancies remain between the inferred and simulated histories of temperature and accumulation rate at GISP2 and NEEM, as well as between the climatic reconstructions themselves.

Caracterização do perfil lesional em futebolistas juniores da 2ª Divisão Distrital e análise do impacto do programa “FIFA 11+” na performance física e na prevenção de lesões

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciado em Fisioterapia

A influência de um protocolo de treino pliométrico na força explosiva em jovens atletas de voleibol feminino

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciado em Fisioterapia