Development of a weather-based model for Botrytis leaf blight of onion

ABSTRACT In the present study, onion plants were tested under controlled conditions for the development of a climate model based on the influence of temperature (10, 15, 20 and 25°C) and leaf wetness duration (6, 12, 24 and 48 hours) on the severity of Botrytis leaf blight of onion caused by Botrytis squamosa. The relative lesion density was influenced by temperature and leaf wetness duration (P <0.05). The disease was most severe at 20°C. Data were subjected to nonlinear regression analysis. Beta generalized function was used to adjust severity and temperature data, while a logistic function was chosen to represent the effect of leaf wetness on the severity of Botrytis leaf blight. The response surface obtained by the product of two functions was expressed as ES = 0.008192 * (((x-5)1.01089) * ((30-x)1.19052)) * (0.33859/(1+3.77989 * exp (-0.10923*y))), where ES represents the estimated severity value (0.1); x, the temperature (°C); and y, the leaf wetness (in hours). This climate model should be validated under field conditions to verify its use as a computational system for the forecasting of Botrytis leaf blight in onion.

Palvelun laadun dimensiot ja asiakastyytyväisyys osuuskuntamuotoisissa opinnoissa

Saimaan ammattikorkeakoulun uudessa Luotsi-toimintamallissa opiskelijat oppivat yritysten antamia toimeksiantoja toteuttamalla. Opiskelijat perustavat oman osuuskuntamuotoisen tiimiyrityksen. Suuri osa opetussuunnitelman opintojaksoista toteutetaan tehden asiakasprojekteja. Tutkielman päätavoitteena on selvittää, mitkä ovat palvelun laadun dimensiot osuuskuntamuotoisissa opinnoissa ja millaisina opiskelijat ne kokevat. Tavoitteina on myös käsitellä tapaa, joilla palvelun laatu muodostuu korkeakouluissa sekä tutkia miksi asiakastyytyväisyyttä mitataan ja millaiseksi se koetaan. Teorian pohjalta päädytään tarkastelemaan viittä koulutuksen dimensiota, jotka ovat osa korkeakoulun palvelun laatua ja vaikuttavat asiakastyytyväisyyteen: opetussuunnitelma, oppimisympäristöt, opetusmenetelmät, ohjaus ja opetus sekä osaamisen arviointi. Empiirisen tutkimuksen kohderyhmänä on Luotsi-mallissa aloittanut liiketalouden pilottiryhmä. Tutkimuksessa käytetään kyselylomaketta sekä teemahaastattelua ryh-mälle. Kyselylomake koostuu 108 kysymyksestä, jotka on jaettu kolmeen osaan: tärkeyden, odotusten ja nykytilan arviointiin seitsenportaisella Li-kert-asteikolla. Haastattelun avulla syvennetään aineistoa. Tulokseksi saadaan attribuuttien ja dimensioiden tärkeysjärjestys sekä arvot nykytilalle, odotuksille ja niiden erotukselle. Tulosten pohjalta nostetaan esiin attribuutit, jotka tarvitsevat eniten kehitystoimia. Tutkimusten perusteella voidaan todeta, että eniten kehitystä vaatii ope-tussuunnitelma ja siihen välillisesti liittyvät attribuutit muista dimensioista. Suurin kynnys Luotsi-toimintamallin onnistumiselle on saavuttaa opiskelijoiden ja opettajien välille toimiva keskusteluyhteys sekä kehittää jatkuvasti opetussuunnitelmaa työelämälähtöisemmäksi.

Logistic regression to estimate the welfare of broiler breeders in relation to environmental and behavioral variables

The increasing demand of consumer markets for the welfare of birds in poultry house has motivated many scientific researches to monitor and classify the welfare according to the production environment. Given the complexity between the birds and the environment of the aviary, the correct interpretation of the conduct becomes an important way to estimate the welfare of these birds. This study obtained multiple logistic regression models with capacity of estimating the welfare of broiler breeders in relation to the environment of the aviaries and behaviors expressed by the birds. In the experiment, were observed several behaviors expressed by breeders housed in a climatic chamber under controlled temperatures and three different ammonia concentrations from the air monitored daily. From the analysis of the data it was obtained two logistic regression models, of which the first model uses a value of ammonia concentration measured by unit and the second model uses a binary value to classify the ammonia concentration that is assigned by a person through his olfactory perception. The analysis showed that both models classified the broiler breeder's welfare successfully.

Mathematical model to estimate of the deterioration of wooden poles in contact with soil used in rural areas

In São Paulo State, mainly in rural areas, the utilization of wooden poles is observed for different purposes. In this context, wood in contact with the ground presents faster deterioration, which is generally associated to environmental factors and, especially to the presence of fungi and insects. With the use of mathematical models, the useful life of wooden structures can be predicted by obtaining "climatic indexes" to indicate, comparatively among the areas studied, which have more or less tendency to fungi and insects attacks. In this work, by using climatological data of several cities at São Paulo State, a simplified mathematical model was obtained to measure the aggressiveness of the wood in contact with the soil.

Palveluliiketoimintamallin kehittäminen teolliselle laitetoimittajalle

Tässä tutkimuksessa käsitellään teollisuuden palveluliiketoimintaa. Yritykset ovat perinteisesti saavuttaneet kilpailuetua markkinoilla tuottamalla teknisesti innovatiivisia koneita ja laitteita, mutta viime vuosien aikana yritykset ovat havainneet tarpeen myös palveluliiketoiminnan kehitykselle. Kohdeyrityksenä on teollisuudelle korkealuokkaisia mittalaitteita kehittävä ja valmistava yritys. Tutkimuksen tarkoituksena oli kehittää uusi innovatiivinen vuokraukseen perustuva palveluliiketoimintamalli perinteisen hankinnan sijaan. Olennaisena osana uuteen palveluliiketoimintamalliin liittyi myös tuotteen elinkaarikustannusten selvittäminen ja laskeminen. Toisena tutkimuksen kohteena oli selvittää semi-kvalitatiivisen kyselytutkimuksen avulla, miten yrityksen asiakkaat ja henkilökunta näkevät palveluiden tuottamisen nykytilan ja mitä haasteita palveluliiketoimintaan siirtyminen aiheuttaa organisaatiolle. Työn teoriaosuudessa käsiteltiin palveluliiketoimintaa eri näkökulmista, palvelun laadun muodostumista sekä uuden liiketoimintamallin kehittämistä Osterwalderin Canvas mallin avulla. Lisäksi käsiteltiin elin-kaarilaskennan soveltamista palveluliiketoiminnassa sekä eri investointimalleja teollisiin palveluihin. Kyselytutkimuksen tulosten perusteella asiakkaiden ja yrityksen henkilökunnan näkemykset erosivat palvelun laadun ja prosessien nykytilasta. Asiakkaat arvostivat palvelut paremmalle tasolle kuin henkilökunta. Tulosten perusteella yrityksen olisi kohdennettava resursseja sisäisten prosessien parantamiseen ja kehitettävä organisaatiota enemmän palveluorientoituneeksi. Tuotteen elinkaarikustannukset onnistuttiin selvittämään hyvin ja niiden avulla pystyttiin luomaan sekä yritykselle kannattava että asiakkaille houkutteleva palveluliiketoimintamalli, jonka avulla yrityksen on mahdollista palvella asiakkaitaan entistä paremmin.

Reflexive model of research-based theatre – processing innovation at the crossroads of theatre, reflection and practice-based innovation activities

Contemporary organisations have to embrace the notion of doing ‘more with less’. This challenges knowledge production within companies and public organisations, forcing them to reorganise their structures and rethink what knowledge production actually means in the context of innovation and how knowledge is actually produced among various professional groups within the organisation in their everyday actions. Innovations are vital for organisational survival, and ‘ordinary’ employees and customers are central but too-often ignored producers of knowledge for contemporary organisations. Broader levels of participation and reflexive practices are needed. This dissertation discusses the missing links between innovation research conducted in the context of industrial management, arts, and culture; applied drama and theatre practices (specifically post-Boalian approaches); and learning – especially organising reflection – in organisational settings. This dissertation (1) explores and extends the role of research-based theatre to organising reflection and reflexive practices in the context of practice-based innovation, (2) develops a reflexive model of RBT for investigating and developing practice-based organisational process innovations in order to contribute to the development of a tool for innovation management and analysis, and (3) operationalises this model within private- and publicsector organisations. The proposed novel reflexive model of research-based theatre for investigating and developing practice-based organisational process innovations extends existing methods and offers a different way of organising reflection and reflexive practices in the context of general innovation management. The model was developed through five participatory action research processes conducted in four different organisations. The results provide learning steps – a reflection path – for understanding complex organisational life, people, and relations amid renewal and change actions. The proposed model provides a new approach to organising and cultivating reflexivity in practice-based innovation activities via research-based theatre. The results can be utilised as a guideline when processing practice-based innovation within private or public organisations. The model helps innovation managers to construct, together with their employees, temporary communities where they can learn together through reflecting on their own and each others’ experiences and to break down assumptions related to their own perspectives. The results include recommendations for practical development steps applicable in various organisations with regard to (i) application of research-based theatre and (ii) related general innovation management. The dissertation thus contributes to the development of novel learning approaches in knowledge production. Keywords: practice-based innovation, research-based theatre, learning, reflection, mode 2b knowledge production

Fatigue and quality of life in breast cancer survivors: a comparative study

PURPOSE: To assess fatigue and quality of life in disease-free breast cancer survivors in relation to a sample of age-matched women with no cancer history and to explore the relationship between fatigue and quality of life.METHODS: A cross-sectional study was conducted in a sample of 202 consecutive disease-free Brazilian breast cancer survivors, all of whom had completed treatment, treated at 2 large hospitals. The patients were compared to age-matched women with no cancer history attending a primary health care center. The Piper Fatigue Scale-Revised and the World Health Organization Quality of Life Instrument (WHOQOL-BREF) were used to measure the fatigue and quality of life, respectively. Socio-demographic and clinical variables were also obtained. The χ2 test, generalized linear model, and Spearman correlation coefficient were used for statistical purposes. The adopted level of significance was 5%.RESULTS: Breast cancer survivors experienced significantly greater total and subscale fatigue scores than comparison group (all p-values<0.05). In addition, survivors reported a poorer quality of life in physical (p=0.002), psychological (p=0.03), and social relationships (p=0.03) domains than comparison group. No difference was found for the environmental domain (p=0.08) for both groups. For survivors of breast cancer and for comparison group, the total and subscale fatigue scores were related to lower quality of life (all p-values<0.01).CONCLUSION: The findings of this study highlight the importance of assessing fatigue and quality of life in breast cancer survivors.

Integration of existing military capability models into the Comprehensive Capability Meta-model

Abstract—This paper discusses existing military capability models and proposes a comprehensive capability meta-model (CCMM) which unites the existing capability models into an integrated and hierarchical whole. The Zachman Framework for Enterprise Architecture is used as a structure for the CCMM. The CCMM takes into account the abstraction level, the primary area of application, stakeholders, intrinsic process, and life cycle considerations of each existing capability model, and shows how the models relate to each other. The validity of the CCMM was verified through a survey of subject matter experts. The results suggest that the CCMM is of practical value to various capability stakeholders in many ways, such as helping to improve communication between the different capability communities.

The Effects of Service Quality, Customer Satisfaction and Customer Perceived Value on Behavioral Intentions

The intent of this research was to develop a model that describes the extent to which customer behavioral intentions are influenced by service quality, customer satisfaction and customer perceived value in the business-to-business service context. Research on customer behavioral intentions is quite fragmented and no generalized model has been presented. Thus, there was need for empirical testing. This study builds on the services marketing theory and assesses the relationships between the identified constructs. The data for the empirical analysis was collected via a quantitative online survey and a total of 226 usable responses were obtained for further analysis. The model was tested in an employment agency service setting. The measures used in this survey were first assessed by using confirmatory factor analysis (CFA) after which the hypothesized relationships were further verified using structural equation modeling (SEM) in LISREL 8.80. The analysis identified that customer satisfaction played a pivotal role in the model as it was the only direct antecedent of customer behavioral intentions, however, customer perceived value showed a strong indirect impact on buying intentions via customer satisfaction. In contrast to what was hypothesized, service quality and customer perceived value did not have a direct positive effect on behavioral intentions. Also, a contradicting finding with current literature was that sacrifice was argued to have a direct but positive impact on customer perceived value. Based on the findings in this study, managers should carefully think of their service strategies that lead to their customers’ favorable behavioral intentions.

Licensing Model Development for Small Modular Reactors (SMRs) - Focusing on the Finnish Regulatory Framework

Recently, Small Modular Reactors (SMRs) have attracted increased public discussion. While large nuclear power plant new build projects are facing challenges, the focus of attention is turning to small modular reactors. One particular project challenge arises in the area of nuclear licensing, which plays a significant role in new build projects affecting their quality as well as costs and schedules. This dissertation - positioned in the field of nuclear engineering but also with a significant section in the field of systems engineering - examines the nuclear licensing processes and their suitability for the characteristics of SMRs. The study investigates the licensing processes in selected countries, as well as other safety critical industry fields. Viewing the licensing processes and their separate licensing steps in terms of SMRs, the study adopts two different analysis theories for review and comparison. The primary data consists of a literature review, semi-structured interviews, and questionnaire responses concerning licensing processes and practices. The result of the study is a recommendation for a new, optimized licensing process for SMRs. The most important SMR-specific feature, in terms of licensing, is the modularity of the design. Here the modularity indicates multi-module SMR designs, which creates new challenges in the licensing process. As this study focuses on Finland, the main features of the new licensing process are adapted to the current Finnish licensing process, aiming to achieve the main benefits with minimal modifications to the current process. The application of the new licensing process is developed using Systems Engineering, Requirements Management, and Project Management practices and tools. Nuclear licensing includes a large amount of data and documentation which needs to be managed in a suitable manner throughout the new build project and then during the whole life cycle of the nuclear power plant. To enable a smooth licensing process and therefore ensure the success of the new build nuclear power plant project, management processes and practices play a significant role. This study contributes to the theoretical understanding of how licensing processes are structured and how they are put into action in practice. The findings clarify the suitability of different licensing processes and their selected licensing steps for SMR licensing. The results combine the most suitable licensing steps into a new licensing process for SMRs. The results are also extended to the concept of licensing management practices and tools.

A simulation model of the optimal maintenance strategy: conceptual agent-based approach

In this Master’s thesis agent-based modeling has been used to analyze maintenance strategy related phenomena. The main research question that has been answered was: what does the agent-based model made for this study tell us about how different maintenance strategy decisions affect profitability of equipment owners and maintenance service providers? Thus, the main outcome of this study is an analysis of how profitability can be increased in industrial maintenance context. To answer that question, first, a literature review of maintenance strategy, agent-based modeling and maintenance modeling and optimization was conducted. This review provided the basis for making the agent-based model. Making the model followed a standard simulation modeling procedure. With the simulation results from the agent-based model the research question was answered. Specifically, the results of the modeling and this study are: (1) optimizing the point in which a machine is maintained increases profitability for the owner of the machine and also the maintainer with certain conditions; (2) time-based pricing of maintenance services leads to a zero-sum game between the parties; (3) value-based pricing of maintenance services leads to a win-win game between the parties, if the owners of the machines share a substantial amount of their value to the maintainers; and (4) error in machine condition measurement is a critical parameter to optimizing maintenance strategy, and there is real systemic value in having more accurate machine condition measurement systems.

A New Model to Determine the Dispersion of Fatigue Damage Evaluations

Reliable predictions of remaining lives of civil or mechanical structures subjected to fatigue damage are very difficult to be made. In general, fatigue damage is extremely sensitive to the random variations of material mechanical properties, environment and loading. These variations may induce large dispersions when the structural fatigue life has to be predicted. Wirsching (1970) mentions dispersions of the order of 30 to 70 % of the mean calculated life. The presented paper introduces a model to estimate the fatigue damage dispersion based on known statistical distributions of the fatigue parameters (material properties and loading). The model is developed by expanding into Taylor series the set of equations that describe fatigue damage for crack initiation.

Toimituskyvyn kehittäminen prosessin materiaalipuutteita hallitsemalla

Toimituskyky on yrityksen suorituskykyä kuvaava tekijä, jolla on merkittävä vaikutus asiakastyytyväisyyteen, erityisesti valmistusteollisuudessa. Toimituskyky muodostuu materiaalin saatavuudesta ja logistisen järjestelmän toimitusvarmuudesta, joten hyvä toimituskyky edellyttää materiaalipuutteiden hallintaa. Tämän diplomityön tavoitteena on esittää, miten toimituskykyä voidaan kehittää tilaus-toimitusprosessin materiaalipuutteita hallitsemalla. Tutkimus toteutettiin konstruktiivisella tutkimusotteella case-tutkimuksena havainnoimalla toimintaa case-yrityksessä sekä analysoimalla case-yrityksen kirjallista materiaalia ja arkistoja. Yrityksessä havaittuja materiaalipuutteisiin liittyviä ongelmia tarkasteltiin tilaus-toimitusprosessin näkökulmasta prosessijohtamisen ja systemaattisen ongelmanratkaisun teorioiden avulla. Tutkimuksen tuloksena laadittiin kolme käytännönläheistä ratkaisuehdotusta havaittuihin ongelmiin; (1) materiaalipuutteiden syy-seuraussuhteita kuvaavat ongelma-syy-seurausketjut, (2) materiaalipuutteiden ongelmanratkaisumalli systemaattisen ongelmanratkaisun tueksi sekä (3) visuaalinen tilaus-toimitusprosessimalli, joka painottaa osaprosessien yhteyttä koko prosessin toimituskykyyn ja toimitusvarmuuteen. Tulosten mukaan materiaalipuutteet tulisi käsittää prosessin laatuvirheinä, jotka antavat arvokasta tietoa siitä, että prosessissa on laatuongelmia. Tulosten perusteella yrityksen toimituskykyä voidaan kehittää havainnoimalla tilaus-toimitusprosessin laatuvirheitä, selvittämällä laatuvirheiden syy-seuraussuhteet systemaattisesti ongelmanratkaisumallia hyödyntäen sekä toimimalla prosessiajattelun mukaisesti tilaus-toimitusprosessin toimituskyvyn jatkuvaa parantamista tavoitellen. Tutkimusongelman tarkastelutapaa ja työn tuloksia voidaan soveltaa samankaltaisiin tapauksiin, joissa tilaus-toimitusprosessin laatuvirheet, esimerkiksi materiaalipuutteet, paljastavat kehittämistä vaativia epäkohtia prosessin toimintatavoissa. Tilaus-toimitusprosessin toimituskykyä voidaan kehittää vain, jos panostetaan ajan hallintaan ja kykyyn toimia asiakaslupausten ja sopimusten mukaisesti.

Container logistic innovations in forest-energy sector: Markets, future service concepts and technical improvements

The report presents the results of the commercialization project called the Container logistic services for forest bioenergy. The project promotes new business that is emerging around overall container logistic services in the bioenergy sector. The results assess the European markets of the container logistics for biomass, enablers for new business creation and required service bundles for the concept. We also demonstrate the customer value of the container logistic services for different market segments. The concept analysis is based on concept mapping, quality function deployment process (QFD) and business network analysis. The business network analysis assesses key shareholders and their mutual connections. The performance of the roadside chipping chain is analysed by the logistic cost simulation, RFID system demonstration and freezing tests. The EU has set the renewable energy target to 20 % in 2020 of which Biomass could account for two-thirds. In the Europe, the production of wood fuels was 132.9 million solid-m3 in 2012 and production of wood chips and particles was 69.0 million solidm3. The wood-based chips and particle flows are suitable for container transportation providing market of 180.6 million loose- m3 which mean 4.5 million container loads per year. The intermodal logistics of trucks and trains are promising for the composite containers because the biomass does not freeze onto the inner surfaces in the unloading situations. The overall service concept includes several packages: container rental, container maintenance, terminal services, RFID-tracking service, and simulation and ERP-integration service. The container rental and maintenance would provide transportation entrepreneurs a way to increase the capacity without high investment costs. The RFID-concept would lead to better work planning improving profitability throughout the logistic chain and simulation supports fuel supply optimization.

Employees’ continuous learning and job satisfaction - effects on productivity

In today’s knowledge intense economy the human capital is a source for competitive advantage for organizations. Continuous learning and sharing the knowledge within the organization are important to enhance and utilize this human capital in order to maximize the productivity. The new generation with different views and expectations of work is coming to work life giving its own characteristics on learning and sharing. Work should offer satisfaction so that the new generation employees would commit to organizations. At the same time organizations have to be able to focus on productivity to survive in the competitive market. The objective of this thesis is to construct a theory based framework of productivity, continuous learning and job satisfaction and further examine this framework and its applications in a global organization operating in process industry. Suggestions for future actions are presented for this case organization. The research is a qualitative case study and the empiric material was gathered by personal interviews concluding 15 employee and one supervisor interview. Results showed that more face to face interaction is needed between employees for learning because much of the knowledge of the process is tacit and so difficult to share in other ways. Offering these sharing possibilities can also impact positively to job satisfaction because they will increase the sense of community among employees which was found to be lacking. New employees demand more feedback to improve their learning and confidence. According to the literature continuous learning and job satisfaction have a relative strong relationship on productivity. The employee’s job description in the case organization has moved towards knowledge work due to continuous automation and expansion of the production process. This emphasizes the importance of continuous learning and means that productivity can be seen also from quality perspective. The normal productivity output in the case organization is stable and by focusing on the quality of work by improving continuous learning and job satisfaction the upsets in production can be handled and prevented more effectively. Continuous learning increases also the free human capital input and utilization of it and this can breed output increasing innovations that can increase productivity in long term. Also job satisfaction can increase productivity output in the end because employees will work more efficiently, not doing only the minimum tasks required. Satisfied employees are also found participating more in learning activities.