Os desafios da qualificação profissional pós-secundária não-superior (nível 4) para a inovação empresarial no contexto da União Europeia e dos países da OCDE

A maioria das nações mais desenvolvidas deve, em larga medida, a sua prosperidade à produtividade da sua força de trabalho. Esta produtividade relaciona-se, fundamentalmente, com dois aspectos essenciais. Por um lado, com o nível e adequação das qualificações e competências da população activa, as quais permitem desenvolver o empreendedorismo e criar riqueza e, por outro, com a qualidade e grau de sofisticação dos equipamentos, tecnologias, modelos de organização e sistemas de gestão de que as empresas dispõem. Nesta comunicação, elaborada por convite para apresentação na sessão comemorativa do 20º aniversário da AFTEM, no Porto, após a contextualização das exigências do mercado de trabalho em resultado da inovação empresarial e da emergência das economias baseadas no conhecimento, apresentam-se alguns estudos recentemente concluídos em diversos países e regiões da OCDE, nomeadamente, Austrália, Irlanda, Reino Unido e Escócia – nos quais se foca a necessidade de incrementar o nível de qualificações para responder às necessidades do tecido produtivo por forma a manter a competitividade da indústria e serviços desses países e regiões à escala global; em particular realça-se a importância de se aumentar a percentagem de população activa com nível 4 de qualificação profissional. Aborda-se, ainda, a situação da formação pós secundária não superior em Portugal (nível 4). Conclui-se, formulando algumas recomendações em termos de estratégias e de trabalho futuro com vista a dinamizar as oportunidades de qualificação de nível 4, em estreita articulação com as empresas, como forma de o tecido produtivo nacional dispor de níveis de qualificação de recursos humanos que permitam a mobilidade para novas actividades com maior valor acrescentado e, por esta via, atingir níveis de rentabilidade semelhante à dos restantes estados membros da UE e de outros países da OCDE.

KrP laser CVD of chromium oxide by photodissociation of Cr(CO)(6)

This work reports on the synthesis of chromium oxide thin films prepared by photodissociation of Cr(CO)(6) in an oxidizing atmosphere, using a pulsed UV laser (KrF, lambda = 248 nm). The experimental conditions, which should enable the synthesis of CrO2, are discussed and results on the deposition of CrxOy films on Al2O3 (0001) substrates are presented.

Morphological and structural characterization of CrO2/Cr2O3 films grown by laser-CVD

This work reports on the synthesis of chromium (III, IV) oxides films by KrF laser-assisted CVD. Films were deposited onto sapphire substrates at room temperature by the photodissociation of Cr(CO)(6) in dynamic atmospheres containing oxygen and argon. A study of the processing parameters has shown that partial pressure ratio Of O-2 to Cr(CO)(6) and laser fluence are the prominent parameters that have to be accurately controlled in order to co-deposit both the crystalline oxide phases. Films consistent with such a two-phase system were synthesised for a laser fluence of 75 mJ cm(-2) and a partial pressure ratio of about 1. (c) 2005 Elsevier B.V. All rights reserved.

Bioatividade da quinoxalina 1,4-dióxido e seus derivados

O objetivo deste estudo consiste em avaliar a atividade antimicrobiana da quinoxalina 1,4-dióxido e alguns dos seus derivados em estirpes bacterianas e leveduras. Os compostos estudados foram a quinoxalina 1,4-dióxido (QNX), 2-metilquinoxalina-1,4-dióxido (2MQNX), 2-metil-3-Benzoilquinoxalina-1,4-dióxido (2M3BenzoilQNX), 2-metil-3-benzilquinoxalina-1,4-dióxido (2M3BQNX), 2-amino-3-cianoquinoxalina-1,4-dióxido (2A3CQNX), 3-metil-2-quinoxalinacarboxamida-1,4-dióxido (3M2QNXC), 2-hidroxifenazina–N-dióxido (2HF) e 3-metil-N-(2-metilphenil)quinoxalinacarboxamida-1,4-dioxido (3MN(2MF)QNXC). Os modelos procariotas selecionados para este estudo foram o Staphylococcus aureus ATCC 6538, Staphylococcus aureus ATCC 6538P, Staphylococcus aureus ATCC 29213, Escherichia coli ATCC 25922, Escherichia coli S3R9, Escherichia coli S3R22, Escherichia coli TEM CTX-M9, Escherichia coli TEM-1, Escherichia coli AmpC MOX-2, Escherichia coli CTX-M2 e Escherichia coli CTX-M9. A Candida albicans ATCC 10231 e a Saccharomyces cerevisiae PYCC 4072 constituíram os modelos eucariotas deste estudo. Para os compostos químicos que apresentem atividade pelo método de difusão em disco, será determinada a Concentração Mínima Inibitória (CMI), bem como a viabilidade e o crescimento (na presença e na ausência dos compostos químicos). Os resultados deste estudo mostram atividade antimicrobiana para a maioria dos compostos estudados em todos os modelos procariotas Gram negativos, à exceção da E.coli CTX-M2 e CTX-M9 e nenhuma atividade nos modelos eucariotas. O estudo da viabilidade/curvas de morte em bactérias e num modelo eucariota (S.cerevisiae) sugerem que alguns destes compostos constituem potenciais drogas para a quimioterapia antibacteriana.

Complexes of copper(II) with 3-(ortho-substituted phenylhydrazo)pentane-2,4-diones: syntheses,properties and catalytic activity for cyclohexane oxidation

Reactions of copper(II) with 3-phenylhydrazopentane-2,4-diones X-2-C6H4-NHN = C{C(= O)CH3}(2) bearing a substituent in the ortho-position [X = OH (H2L1) 1, AsO3H2 (H3L2) 2, Cl (HL3) 3, SO3H (H2L4) 4, COOCH3 (HL5) 5, COOH (H2L6) 6, NO2 (HL7) 7 or H (HL8) 8] lead to a variety of complexes including the monomeric [CuL4(H2O)(2)]center dot H2O 10, [CuL4(H2O)(2)] 11 and [Cu(HL4)(2)(H2O)(4)] 12, the dimeric [Cu-2(H2O)(2)(mu-HL2)(2)] 9 and the polymeric [Cu(mu-L-6)](n)] 13 ones, often bearing two fused six-membered metallacycles. Complexes 10-12 can interconvert, depending on pH and temperature, whereas the Cu(II) reactions with 4 in the presence of cyanoguanidine or imidazole (im) afford the monomeric compound [Cu(H2O)(4){NCNC(NH2)(2)}(2)](HL4)(2)center dot 6H(2)O 14 and the heteroligand polymer [Cu(mu-L-4)(im)](n) 15, respectively. The compounds were characterized by single crystal X-ray diffraction (complexes), electrochemical and thermogravimetric studies, as well as elemental analysis, IR, H-1 and C-13 NMR spectroscopies (diones) and ESI-MS. The effects of the substituents in 1-8 on the HOMO-LUMO gap and the relative stability of the model compounds [Cu(OH)(L-8)(H2O)]center dot H2O, [Cu(L-1)(H2O)(2)]center dot H2O and [Cu(L-4)(H2O)(2)]center dot H2O are discussed on the basis of DFT calculations that show the stabilization follows the order: two fused 6-membered > two fused 6-membered/5-membered > one 6-membered metallacycles. Complexes 9, 10, 12 and 13 act as catalyst precursors for the peroxidative oxidation (with H2O2) of cyclohexane to cyclohexanol and cyclohexanone, in MeCN/H2O (total yields of ca. 20% with TONs up to 566), under mild conditions.

Contributos de um ambiente de geometria dinâmica (geogebra) e do geoplano na compreensão das propriedades e relações entre quadriláteros: um estudo com alunos do 4.º ano

O estudo insere-se no âmbito da educação matemática, mais especificamente na área da geometria. Com esta investigação pretende-se compreender qual o contributo do Ambiente de Geometria Dinâmica (AGD), GeoGebra, e do material manipulável (geoplano) na identificação das propriedades e relações entre quadriláteros: trapézio, paralelogramo, retângulo, losango e quadrado. De acordo com o objetivo do estudo formularam-se três questões: Qual o papel das representações na identificação das propriedades dos quadriláteros? Que influência tem a visualização na identificação das propriedades dos quadriláteros? Quais os contributos da utilização do AGD, GeoGebra, e do material manipulável (geoplano) na compreensão das propriedades e relações entre os quadriláteros? Atendendo à problemática em estudo, optou-se por uma metodologia de investigação predominantemente qualitativa, baseada em três estudos de caso. A recolha de dados empíricos foi realizada numa turma de 4.º ano do 1.º ciclo do ensino básico onde se implementou uma experiência de ensino, envolvendo todos os alunos e recorrendo ao geoplano e ao GeoGebra. Essa recolha incidiu na observação participante, em sala de aula, no registo de notas da investigadora, nos documentos produzidos pelos alunos e nos registos áudio e vídeo das discussões nos grupos e no coletivo da turma. Em termos de resultados, salienta-se que a utilização de representações evidenciou a compreensão que os alunos têm dos conceitos, facilitou a identificação das propriedades dos quadriláteros e a compreensão das relações entre eles. Os alunos identificaram as propriedades com base nas representações, no entanto focaram-se em casos particulares, de acordo com a imagem mental que têm da figura, especificamente o protótipo, indiciando a influência da visualização. Dos resultados sobressai também a dificuldade que os alunos sentiram em considerar uma figura como representante de uma classe e em distinguir atributos essenciais e não essenciais. Da análise dos dados ressalta também que tanto o geoplano como o GeoGebra foram uma mais-valia na concretização da experiência de ensino deste estudo. Os dois possuem vantagens e limitações e podem ser usados de maneira que um complemente o outro, podendo dessa forma contribuir, favoravelmente, para a aprendizagem da geometria. - ABSTRACT The study falls within the scope of mathematics education, specifically in the area of geometry. This research aims to understand the contribution of the Dynamic Geometry Environment (GeoGebra) and manipulative material (Geoboard) in the identification of properties and relations of quadrilaterals: trapezium, parallelogram, rectangle, diamond and square. According to the purpose of the study three questions were formulated: What is the role of the representations in the identification of the properties of quadrilaterals? What is the influence of visualization on the identification of the properties of quadrilaterals? What are the contributions on the use of Dynamic Geometry Environment (GeoGebra) and manipulative material (Geoboard) to understand the properties and relationships among quadrilaterals? Given the problem under study, it was chosen a predominantly qualitative research methodology based on three case studies. The empirical data collection was carried out on a fourth primary grade class, where it was implemented a teaching experience, involving all students and the use of Geoboard and GeoGebra. This collection was focused on participant observation in the classroom, in the record of the researcher’s notes, the documents produced by the students and the audio and video recordings of group discussions and collective class. In terms of results, it is noted that the use of representations showed the students understanding of the concepts and that it has facilitated the identification of the properties of quadrilaterals and understanding of the relationships between them. The students identified properties based on representations, however they focused in particular cases, according to the mental image that they have of the figure, specifically the prototype, indicating the influence of visualization. Results also highlights the difficulty that students felt in considering a figure as a representation of a group and distinguishing essential and nonessential attributes. Data analysis also highlights that both Geoboard and GeoGebra have been an asset in the delivery of teaching experience in this study. Both have advantages and limitations and they may be used to complement each other and contribute favorably to the learning of geometry.

Estudo da norma contabilística e de relato financeiro nº 4 – politicas contabilísticas, alterações nas estimativas contabilísticas e erros

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do Grau de Mestre em Auditoria Orientador: Professor Doutor José da Silva Fernandes

Syntheses, Molecular Structures, Electrochemical Behavior, Theoretical Study, and Antitumor Activities of Organotin(IV) Complexes Containing 1-(4-Chlorophenyl)-1-cyclopentanecarboxylato Ligands

The organotin(IV) compounds [Me2Sn(L)(2)] (1), [Et(2)sn(L)(2)] (2), [(Bu2Sn)-Bu-n(L)(2)] (3), [(n)Oct(2)Sn(L)(2)] (4), [Ph2Sn(L)(2)] (5), and [PhOSnL](6) (6) have been synthesized from the reactions of 1-(4-chlorophenyl)-1-cyclopentanecarboxylic acid (HL) with the corresponding diorganotin(IV) oxide or dichloride. They were characterized by IR and multinuclear NMR spectroscopies, elemental analysis, cyclic voltammetry, and, for 2, 3, 4 and 6, single crystal X-ray diffraction analysis. While 1-5 are mononuclear diorganotin (IV) compounds, the X-ray diffraction of 6 discloses a hexameric drumlike structure with a prismatic Sn6O6 core. All these complexes undergo irreversible reductions and were screened for their in vitro antitumor activities toward HL-60, BGC-823, Bel-7402, and KB human cancer cell lines. Within the mononuclear compounds, the most active ones (3, 5) are easiest to reduce (least cathodic reduction potentials), while the least active ones (1, 4) are the most difficult to reduce. Structural rearrangements (i.e., Sn-O bond cleavages and trans-to-cis isomerization) induced by reduction, which eventually can favor the bioactivity, are disclosed by theoretical/electrochemical studies.

Trends in properties of para-substituted 3-(phenylhydrazo)pentane-2,4-diones

Trends between the Hammett's sigma(p) and related normal sigma(n)(p), inductive sigma(I), resonance sigma(R), negative sigma(-)(p) and positive sigma(+)(p) polar conjugation and Taft's sigma(o)(p) substituent constants and the N-H center dot center dot center dot O distance, delta(N-H) NMR chemical shift, oxidation potential (E-p/2(ox), measured in this study by cyclic voltammetry (CV)) and thermodynamic parameters (pK, Delta G(0), Delta H-0 and Delta S-0) of the dissociation process of unsubstituted 3-(phenylhydrazo)pentane-2,4-dione (HL1) and its para-substituted chloro (HL2), carboxy (HL3), fluoro (HL4) and nitro (HL5) derivatives were recognized. The best fits were found for sigma(p) and/or sigma(-)(p) in the cases of d(N center dot center dot center dot O), delta(N-H) and E-p/2(ox), showing the importance of resonance and conjugation effects in such properties, whereas for the above thermodynamic properties the inductive effects (sigma(I)) are dominant. HL2 exists in the hydrazo form in DMSO solution and in the solid state and contains an intramolecular H-bond with the N center dot center dot center dot O distance of 2.588(3)angstrom. It was also established that the dissociation process of HL1-5 is non-spontaneous, endothermic and entropically unfavourable, and that the increase in the inductive effect (sigma(I)) of para-substitutents (-H < -Cl < -COOH < -F < -NO2) leads to the corresponding growth of the N center dot center dot center dot O distance and decrease of the pK and of the changes of Gibbs free energy, of enthalpy and of entropy for the HL1-5 acid dissociation process. The electrochemical behaviour of HL1-5 was interpreted using theoretical calculations at the DFT/HF hybrid level, namely in terms of HOMO and LUMO compositions, and of reactivities induced by anodic and cathodic electron-transfers. Copyright (C) 2010 John Wiley & Sons, Ltd.

Comparison between the HemoCue® and an automated counter for measuring hemoglobin

To determine the precision and agreement of the hemoglobin (Hb) measurements in capillary and venous blood samples by the HemoCue® and an automated counter. Hb was determined by both equipaments in blood samples of 29 pregnant women. The HemoCue® showed low repeatability of Hb measurements in duplicate in capillary (CR=0.53 g/dL, CV=13.6%) and venous blood (CR=0.53 g/dL, CV=13.6%). Hb measurements in capillary blood were higher than those in venous blood (12.4 and 11.7 g/dL, respectively; p<0.05). There was high agreement between Hb in capillary blood by the HemoCue® and in venous blood by the counter (r icc=0.86; p<0.01), and also between the diagnosis of anemia by both equipments (k=0.81; p<0.01). The HemoCue® seems to be more appropriate for capillary blood and require training of the measurers.

BASS 4: a software system for ergonomic design and evaluation of working hours

OBJECTIVE: To extend an existing computer programme for the evaluation and design of shift schedules (BASS 3) by integrating workload as well as economic aspects. METHODS: The redesigned prototype BASS 4 includes a new module with a suitable and easily applicable screening method (EBA) for the assessment of the intensity of physical, emotional and cognitive workload components and their temporal patterns. Specified criterion functions based on these ratings allow for an adjustment of shift and rest duration according to the intensity of physical and mental workload. Furthermore, with regard to interactive effects both workload and temporal conditions, e.g. time of day, are taken into account. In a second new module, important economic aspects and criteria have been implemented. Different ergonomic solutions for scheduling problems can now also be evaluated with regard to their economic costs. RESULTS: The new version of the computer programme (BASS 4) can now simultaneously take into account numerous ergonomic, legal, agreed and economic criteria for the design and evaluation of working hours. CONCLUSIONS: BASS 4 can now be used as an instrument for the design and the evaluation of working hours with regard to legal, ergonomic and economic aspects at the shop floor as well as in administrative (e.g. health and safety inspection) and research problems.

Antimicrobial activity of quinoxaline 1,4-dioxide and three derivatives

O presente trabalho descreve o estudo da actividad e antimicrobiana de quarto derivados da quinoxalina N,N-dióxido: quinoxalina 1,4-dióxido, 2-metilquinoxalina 1,4- dióxido, 6-cloro-2,3-dimetilquinoxalina 1,4-dióxido e 3-benzoil-2-metilquinoxalina 1,4- dióxido contra as estirpes bacterianas Geobacillus stearothermophilus ATCC 10149, Escherichia coli ATCC 25922, Escherichia coli HB101, Escherichia coli (blaTEM, blaCTX-M) e Salmonella (blaCTX-M), assim como contra a estirpe de levedura Saccharomyces cerevisiae PYCC 4072. A determinação da concentração mínima inibitória (MIC) foi realizada pelo método de diluição. Os valores de MIC’s foram estimados para cada composto e estirpe. Os resultados obtidos sugerem potenciais novas drogas para quimioterapia.

Impact of Sahara dust transport on Cape Verde atmospheric element particles

The objectives of this study were to (1) conduct an elemental characterization of airborne particles sampled in Cape Verde and (2) assess the influence of Sahara desert on local suspended particles. Particulate matter (PM10) was collected in Praia city (14°94'N; 23°49'W) with a low-volume sampler in order to characterize its chemical composition by k0-INAA. The filter samples were first weighed and subsequently irradiated at the Portuguese Research Reactor. Results showed that PM10 concentrations in Cape Verde markedly exceeded the health-based air quality standards defined by the European Union (EU), World Health Organization (WHO), and U.S. Environmental Protection Agency (EPA), in part due to the influence of Sahara dust transport. The PM10 composition was characterized essentially by high concentrations of elements originating from the soil (K, Sm, Co, Fe, Sc, Rb, Cr, Ce, and Ba) and sea (Na), and low concentrations of anthropogenic elements (As, Zn, and Sb). In addition, the high concentrations of PM measured in Cape Verde suggest that health of the population may be less affected compared with other sites where PM10 concentrations are lower but more enriched with toxic elements.

Antifungal activity of Imidazolidin-4-ones of the antimalarial primaquine

The 5-Isopropyl-3-[4-(6-methoxy-quinolin-8-ylamino)-pentyl]-2,2-dimethyl-imidazolidin-4-one (ValPQacet) was sinthesized through acylation of the anti-malarial primaquine with α-valine and subsequent reaction of the resulting -aminoamide with propanone (Sheme 1).Imidazolidin-4-ones of the anti malarial primaquine are being sinthesized to develop new variants in order to improve more effective treatments against malaria . Recently it has been observed that primaquine derivates could have effect in a new kind of yeast . To study the fungicidal activity against Candida albicans, Candida tropicalis, Issatchenkia orientalis, Sacharomyces cerevisae, the ValPQacet was put in the form of the hydrochloride salt. The minimal inhibitory concentration (MIC) could be determined for all yeast in the concentration range assayed. Also was determined MIC’s of primaquine hydrochloride salt for all yeast, and this shows that the parent drug is less active than our compound. Further studies are being performed to determine viability and cellular injury with this drugs.

Fungidal and bacterial activity of N,N-dimethyl-4-(2,2,2-trichloro-1-(phenylamino)ethyl)aniline

N,N-dimethyl-4-((phenylamino)methyl)aniline (1) was prepared by condensation of aniline and 4-(dimethylamino)benzaldehyde [1] N,N-dimethyl-4-(2,2,2-trichloro-1-(phenylamino)ethyl)aniline (2) was synthesized by trichloromethylation of the imine (N,N-dimethyl-4-((phenylimino)methyl)aniline (1)) with trichloroacetic anhydride under microwave irradiation [2] (Sheme 1). The present work reports the study of bacterial and yeast activity for the compound 2. The bacteria used in this study are Staphylococcus aureus, Escherichia coli and the yeast are Saccharomyces Cerevisiae Candida albican.The results that we will present are the determination of minimal inhibitory concentration (MIC), by means of microdilution by plate method and the specific growth constants for this microorganism. Further studies are being performed to determine viability and cellular injury with this drug.