Faculty and Student Perspectives Toward Open Courseware, and Open Access Publishing: Some Comparisons Between European and North American Populations

Instructor and student beliefs, attitudes and intentions toward contributing to local open courseware (OCW) sites have been investigated through campus-wide surveys at Universidad Politecnica de Valencia and the University of Michigan. In addition, at the University of Michigan, faculty have been queried about their participation in open access (OA) publishing. We compare the instructor and student data concerning OCW between the two institutions, and introduce the investigation of open access publishing in relation to open courseware publishing.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Treatment-related renal side-effects in pediatric cancer patients

Background: The long-term side-effects of cancer treatments are of growing importance, since the number of pediatric cancer survivors has considerably increased. Renal side-effects should be noted early to prevent further deterioration. Renal dysfunction may also develop long after cancer treatment. Easy and reliable methods for assessing renal function are needed. Aims: The aims were to find the mechanisms behind methotrexate-induced renal damage by studying renal tubular cells (LLC-PK1cells), and to evaluate the usefulness of laboratory tests in assessing glomerular function in pediatric cancer patients by comparing an isotope clearance method with alternative methods. The aim was also to study the long-term effects of bone marrow transplantation (BMT) and high-dose methotrexate (HD-MTX) treatment in renal function. Results: Methotrexate induced time-dependent renal tubular cell swelling and cell death. In patients treated with HD-MTX a significant decrease in GFR was noted after a follow-up time of one to ten years. One year after BMTthe GFR was reduced, especially in patients treated with total body irradiation (TBI). GFR recovered slightly but remained stable thereafter. In glomerular function assessment the serum cystatin C (cysC) concentration showed a significant association with GFR measured by the isotope method. Conclusions: Methotrexate induced acute damage in renal tubular cells. In assessing GFR the isotope method still remains the method of choice, but the assay of cystatin C was the most reliable of other alternatives. Long-term follow-up of renal function is needed in BMT patients and patients treated with HD-MTX.

ESTRO-HERO survey: Radiotherapy equipment and departments in the European countries: Final results from the ESTRO-HERO survey

Background: Documenting the distribution of radiotherapy departments and the availability of radiotherapy equipment in the European countries is an important part of HERO the ESTRO Health Economics in Radiation Oncology project. HERO has the overall aim to develop a knowledge base of the provision of radiotherapy in Europe and build a model for health economic evaluation of radiation treatments at the European level. The aim of the current report is to describe the distribution of radiotherapy equipment in European countries. Methods: An 84-item questionnaire was sent out to European countries, principally through their national societies. The current report includes a detailed analysis of radiotherapy departments and equipment (questionnaire items 2629), analyzed in relation to the annual number of treatment courses and the socio-economic status of the countries. The analysis is based on validated responses from 28 of the 40 European countries defined by the European Cancer Observatory (ECO). Results: A large variation between countries was found for most parameters studied. There were 2192 linear accelerators, 96 dedicated stereotactic machines, and 77 cobalt machines reported in the 27 countries where this information was available. A total of 12 countries had at least one cobalt machine in use. There was a median of 0.5 simulator per MV unit (range 0.31.5) and 1.4 (range 0.44.4) simulators per department. Of the 874 simulators, a total of 654 (75%) were capable of 3D imaging (CT-scanner or CBCToption). The number of MV machines (cobalt, linear accelerators, and dedicated stereotactic machines) per million inhabitants ranged from 1.4 to 9.5 (median 5.3) and the average number of MV machines per department from 0.9 to 8.2 (median 2.6). The average number of treatment courses per year per MV machine varied from 262 to 1061 (median 419). While 69% of MV units were capable of IMRT only 49% were equipped for image guidance (IGRT). There was a clear relation between socio-economic status, as measured by GNI per capita, and availability of radiotherapy equipment in the countries. In many low income countries in Southern and Central-Eastern Europe there was very limited access to radiotherapy and especially to equipment for IMRT or IGRT. Conclusions: The European average number of MV machines per million inhabitants and per department is now better in line with QUARTS recommendations from 2005, but the survey also showed a significant heterogeneity in the access to modern radiotherapy equipment in Europe. High income countries especially in Northern-Western Europe are well-served with radiotherapy resources, other countries are facing important shortages of both equipment in general and especially machines capable of delivering high precision conformal treatments (IMRT, IGRT)

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Project «Water and Environment»: Improving educational practices in the aquatic environment

The project "Water and Environment"for the improvement of educational practices in the aquatic environment, is a research project led by four members of the Research Group of Physical Education at the University of Vic (GREF) experts in water activities. The aim is to train the technicians who teach swimming during school hours. The training is based on improving water treatment practices and competence to face a contradictory scene where clubs develop educational content and where schools transfer to clubs part of its educational activity to contribute significantly and positively to water activities fitting the educational curriculum.

Prochloraz residue levels in ginger submitted to Sportak 450 CE" postharvest treatment

A preliminary study was conducted to determine the residue levels of prochloraz in ginger samples treated with Sportak 450 CE® (prochloraz as active ingredient) under laboratory conditions and cold-storage for 15 days at 10°C and 89% RH. Sampling was carried out at 10 and 15 days after Sportak 450 CE® dip treatment (450 and 900 µg mL-1). Pesticide residues were determined by GCECD. During the study, residue levels in ginger ranged between 3.6 and 10.6 mg Kg-1 for prochloraz.

The Possibilities and Dosimetric Limitations of MLC-Based Intensity-Modulated Radiotherapy Delivery and Optimization Techniques

The use of intensity-modulated radiotherapy (IMRT) has increased extensively in the modern radiotherapy (RT) treatments over the past two decades. Radiation dose distributions can be delivered with higher conformality with IMRT when compared to the conventional 3D-conformal radiotherapy (3D-CRT). Higher conformality and target coverage increases the probability of tumour control and decreases the normal tissue complications. The primary goal of this work is to improve and evaluate the accuracy, efficiency and delivery techniques of RT treatments by using IMRT. This study evaluated the dosimetric limitations and possibilities of IMRT in small (treatments of head-and-neck, prostate and lung cancer) and large volumes (primitive neuroectodermal tumours). The dose coverage of target volumes and the sparing of critical organs were increased with IMRT when compared to 3D-CRT. The developed split field IMRT technique was found to be safe and accurate method in craniospinal irradiations. By using IMRT in simultaneous integrated boosting of biologically defined target volumes of localized prostate cancer high doses were achievable with only small increase in the treatment complexity. Biological plan optimization increased the probability of uncomplicated control on average by 28% when compared to standard IMRT delivery. Unfortunately IMRT carries also some drawbacks. In IMRT the beam modulation is realized by splitting a large radiation field to small apertures. The smaller the beam apertures are the larger the rebuild-up and rebuild-down effects are at the tissue interfaces. The limitations to use IMRT with small apertures in the treatments of small lung tumours were investigated with dosimetric film measurements. The results confirmed that the peripheral doses of the small lung tumours were decreased as the effective field size was decreased. The studied calculation algorithms were not able to model the dose deficiency of the tumours accurately. The use of small sliding window apertures of 2 mm and 4 mm decreased the tumour peripheral dose by 6% when compared to 3D-CRT treatment plan. A direct aperture based optimization (DABO) technique was examined as a solution to decrease the treatment complexity. The DABO IMRT technique was able to achieve treatment plans equivalent with the conventional IMRT fluence based optimization techniques in the concave head-and-neck target volumes. With DABO the effective field sizes were increased and the number of MUs was reduced with a factor of two. The optimality of a treatment plan and the therapeutic ratio can be further enhanced by using dose painting based on regional radiosensitivities imaged with functional imaging methods.

Treatment of Acute Otitis Media

Background: Acute otitis media (AOM) is the most common bacterial infection in young children, but the optimal management of AOM remains controversial. The aim of this study was to assess the efficacy of antimicrobial treatment, either immediate or delayed, for AOM and to compare parental experiences regarding the management of AOM in two countries with very different treatment guidelines. Methods: Altogether, 322 children participated in a randomized, double-blind, placebocontrolled trial. Children 6–35 months of age with AOM received amoxicillin-clavulanate or placebo for 7 days. The primary outcome was the time to treatment failure. In the second study, the delayed antimicrobial treatment group consisted of recipients of placebo who had received rescue treatment. The immediate antimicrobial treatment group consisted of children allocated to amoxicillin-clavulanate group. Parental expectations and opinions were evaluated by questionnaires sent via public day care in Turku, Finland, and Utrecht, the Netherlands. Results: Treatment failure occurred significantly more often in children receiving placebo as compared to antimicrobial treatment (45% vs. 19%, P<0.001). Delayed initiation of antimicrobial treatment did not worsen the recovery from AOM, but it was associated with worsening of the child’s condition, prolongation of symptoms, and absenteeism from day care and parental absenteeism from work. According to the comparative questionnaire, antimicrobial use was more common in Finland than in the Netherlands. Finnish parents believed more often than Dutch parents that antimicrobials are necessary in the treatment of AOM. Conclusions: Children with AOM benefit from antimicrobial treatment. Delayed initiation of antimicrobial does not worsen the overall recovery from AOM, but it might increase the symptom burden and create economic losses. Treatment practices and parental expectations seem to interact with each other. This needs to be considered when AOM treatment guidelines are updated.

Aggression and its Management in Adolescent Forensic Psychiatric Care

The overall goal of this study was to explore and identify good aggression management methods and on that basis to produce recommendations for aggression management in the adolescent forensic setting. The study was conducted in three phases. In Phase I, staff’s (n = 58) perception of adolescent aggressive behaviour and methods to manage it was examined. In Phase II, staff’s (n = 30) perception of treatment settings and treatment interventions available were studied. In Phase III, the effectiveness of an aggression management programme was evaluated. The data were collected during the period 2004-2007. Participants perceived adolescent aggressive behaviour in a similar way and described aggressive behaviour as being a comprehensible phenomenon. Management methods used to control aggressive situations were alike, although the practical solutions varied between the study units, especially regarding coercive methods. Staff members proposed more time and better opportunities to discuss and evaluate the aggression situation in order to improve the methods used. The treatment settings were similar in studied forensic units and interventions were primarily focused on psychological aspects, including management of aggressive behavior. A comprehensive aggression management programme proved to be effective in decreasing incidents of violence. The use of coercive methods in aggression situations decreased and injuries to the staff became less frequent. If staff members intend to apply high quality management methods in aggression situations they have to share a consistent understanding of aggressive behaviour and need to be aware of the various methods available. In addition, they should learn more about assessment methods in order to improve aggression management. International comparison of aggression, methods for managing it and service provision creates a starting point for developing equal care provision and realization within and between European countries.

Treatment of low-risk gestational trophoblastic neoplasia comparing biweekly eight-day Methotrexate with folinic acid versus bolus-dose Actinomycin-D, among Brazilian women

PURPOSE: To compare two single-agent chemotherapy (ChT) regimens evaluating, in first-line treatment, response and side effects and, in final single-agent treatment, the outcomes, among Brazilian patients with low-risk gestational trophoblastic neoplasia (GTN), according to International Federation of Gynecology and Obstetrics (FIGO) 2002. METHODS: Retrospective analysis of two concurrent cohorts with 194 low-risk GTN patients: from 1992 to 2012, as first-line treatment, 115 patients received 4 intramuscular doses of methotrexate alternated with 4 oral doses of folinic acid (MTX/FA) repetead every 14 days and, since 1996, 79 patients received an endovenous bolus-dose of actinomycin D (Act-D), biweekly. At GTN diagnosis, patient opinion was taken into consideration when defining the initial single-agent ChT regimen, and when there was resistance or toxicity to one regimen, the other drug was used preferentially. This study was approved by the Irmandade da Santa Casa de Misericórdia de Porto Alegre Ethical Committee. RESULTS: Both groups were clinically similar (p>0.05). In first-line treatments, frequency of complete response was similar (75.7% with MTX/FA and 67.1% with bolus Act-D); the number of ChT courses -median 3 (range: 1-10) with MTX/FA and 2 (range: 1-6) with bolus Act-D - and the time to remission -median 9 weeks (range: 2-16) with MTX/FA and 10 weeks (range: 2-16) with bolus Act-D) - were not different between the groups. In both groups, first-line side effects frequency were high but intensity was low; stomatitis was higher with MTX/FA (p<0.01) and nausea and vomit with Act-D (p<0.01). Final single-agent ChT responses were high in both groups (94.8% with MTX/FA and 83.5% with bolus Act-D; p<0.01) and 13% higher in the group initially treated with MTX/FA. Rates of hysterectomy and of GTN recurrence were low and similar. No patient died due to GTN. CONCLUSION: The two regimens had similar first-line ChT response. Final single-agent response rates were high and similar in both groups but the final single-agent remission rate was higher in the MTX/FA group.

Leishmanicidal and cholinesterase inhibiting activities of phenolic compounds of Dimorphandra gardneriana and Platymiscium floribundum, native plants from Caatinga biome

In recent years, the Brazilian Health Ministry and the World Health Organization have supported research into new technologies that may contribute to the surveillance, new treatments, and control of visceral leishmaniasis within the country. In light of this, the aim of this study was to isolate compounds from plants of the Caatinga biome, and to investigate their toxicity against promastigote and amastigote forms of Leishmania infantum chagasi, the main responsible parasite for South American visceral leishmaniasis, and evaluate their ability to inhibit acetylcholinesterase enzyme (AChE). A screen assay using luciferase-expressing promastigote form and an in situ ELISA assay were used to measure the viability of promastigote and amastigote forms, respectively, after exposure to these substances. The MTT colorimetric assay was performed to determine the toxicity of these compounds in murine monocytic RAW 264.7 cell line. All compounds were tested in vitro for their anti-cholinesterase properties. A coumarin, scoparone, was isolated from Platymiscium floribundum stems, and the flavonoids rutin and quercetin were isolated from Dimorphandra gardneriana beans. These compounds were purified using silica gel column chromatography, eluted with organic solvents in mixtures of increasing polarity, and identified by spectral analysis. In the leishmanicidal assays, the compounds showed dose-dependent efficacy against the extracellular promastigote forms, with an EC50 for scoporone of 21.4µg/mL, quercetin and rutin 26 and 30.3µg/mL, respectively. The flavonoids presented comparable results to the positive control drug, amphotericin B, against the amastigote forms with EC50 for quercetin and rutin of 10.6 and 43.3µg/mL, respectively. All compounds inhibited AChE with inhibition zones varying from 0.8 to 0.6, indicating a possible mechanism of action for leishmacicidal activity.

Developing Service-based Solutions for Water Treatment in Finnish Mining Industry

The aim of this master’s thesis is to analyze the mining industry customers' current and future needs for the water treatment services and discover new business development opportunities in the context of mine water treatment. In addition, the study focuses on specifying service offerings needed and evaluate suitable revenue generation models for them. The main research question of the study is: What kind of service needs related to water treatment can be identified in the Finnish mining industry? The literature examined in the study focused on industrial service classification and new service development process as well as the revenue generation of services. A qualitative research approach employing a case study method was chosen for the study. The present study uses customer and expert interviews as primary data source, complemented by archival data. The primary data was gathered by organizing total of 13 interviews, and the interviews were analyzed by using qualitative content analysis. The abductive-logic was chosen as the way of conducting scientific reasoning in this study. As a result, new service proposals were developed for Finnish mine industry suppliers. The main areas of development were on asset efficiency services and process support services. The service needs were strongly associated with suppliers’ know-how of water treatment process optimization, cost-effectiveness as well as on alternative technologies. The study provides an insight for managers that wish to pursue a water treatment services as a part of their business offering.

Coercion, Perceived Care and Quality of Life Among Patients in Psychiatric Hospitals

The goals of the study were to describe patients’ perceptions of care after experiencing seclusion/restraint and their quality of life. The goal was moreover to identify methodological challenges related to studies from the perspective of coerced patients. The study was conducted in three phases between September 2008 and April 2012. In the first phase, the instrument Secluded/ Restrained Patients’ Perception of their Treatment (SR-PPT) was developed and validated in Japan in cooperation with a Finnish research group (n = 56). Additional data were collected over one year from secluded/restrained patients using the instrument (n = 90). In the second phase, data were collected during the discharge process (n = 264). In the third phase, data were collected from electronic databases. Methodological and ethical issues were reviewed (n = 32) using systematic review method. Patients perceived that co-operation with the staff was poor; patients’ opinions were not taken into account, treatment targets collated and treatment methods were seen in different ways. Patients also felt that their concerns were not well enough understood. However, patients received getting nurses’ time. In particular, seclusion/restraint was considered unnecessary. The patients felt that they benefited from the isolation in treating their problems more than they needed it, even if the benefit was seen to be minor. Patients treated on forensic wards rated their treatment and care significantly lower than in general units. During hospitalization secluded/restrained patients evaluated their quality of life, however, better than did non-secluded/restrained patients. However, no conclusion is drawn to the effect that the better quality of life assessment is attributable to the seclusion/restraint because patients’ treatment period after the isolation was long and because of many other factors, as rehabilitation, medication, diagnostic differences, and adaptation. According to the systematic mixed studies review variation between study designs was found to be a methodological challenge. This makes comparison of the results more difficult. A research ethical weakness is conceded as regards descriptions of the ethical review process (44 %) and informed consent (32 %). It can be concluded that patients in psychiatric hospital care and having a voice as an equal expert require special attention to clinical nursing, decision-making and service planning. Patients and their family members will be consulted in plans of preventive and alternative methods for seclusion and restraint. The study supports the theory that in ethical decision-making situations account should be taken of medical indications, in addition to the patients’ preferences, the effect of treatment on quality of life, and this depends on other factors. The connection between treatment decisions and a patient’s quality of life should be evaluated more structurally in practice. Changing treatment culture towards patients’ involvement will support daily life in nursing and service planning taking into account improvements in patients’ quality of life.