948 resultados para weighted maxima
Resumo:
Thiourea (CS(NH2)2) is one of the few examples of molecular crystals exhibiting ferroelectric properties. The dielectric constant along the ferroelectric axis [100] shows maxima at 169, 177 and 202 K. An inflection point occurs at 170.5 KZ Following Goldsmith and White the phases are named as I (F.E. below 169 K), II (A.F.E. 169 K
Resumo:
The problem of denoising damage indicator signals for improved operational health monitoring of systems is addressed by applying soft computing methods to design filters. Since measured data in operational settings is contaminated with noise and outliers, pattern recognition algorithms for fault detection and isolation can give false alarms. A direct approach to improving the fault detection and isolation is to remove noise and outliers from time series of measured data or damage indicators before performing fault detection and isolation. Many popular signal-processing approaches do not work well with damage indicator signals, which can contain sudden changes due to abrupt faults and non-Gaussian outliers. Signal-processing algorithms based on radial basis function (RBF) neural network and weighted recursive median (WRM) filters are explored for denoising simulated time series. The RBF neural network filter is developed using a K-means clustering algorithm and is much less computationally expensive to develop than feedforward neural networks trained using backpropagation. The nonlinear multimodal integer-programming problem of selecting optimal integer weights of the WRM filter is solved using genetic algorithm. Numerical results are obtained for helicopter rotor structural damage indicators based on simulated frequencies. Test signals consider low order polynomial growth of damage indicators with time to simulate gradual or incipient faults and step changes in the signal to simulate abrupt faults. Noise and outliers are added to the test signals. The WRM and RBF filters result in a noise reduction of 54 - 71 and 59 - 73% for the test signals considered in this study, respectively. Their performance is much better than the moving average FIR filter, which causes significant feature distortion and has poor outlier removal capabilities and shows the potential of soft computing methods for specific signal-processing applications. (C) 2005 Elsevier B. V. All rights reserved.
Resumo:
Hardware constraints, which motivate receive antenna selection, also require that various antenna elements at the receiver be sounded sequentially to obtain estimates required for selecting the `best' antenna and for coherently demodulating data thereafter. Consequently, the channel state information at different antennas is outdated by different amounts and corrupted by noise. We show that, for this reason, simply selecting the antenna with the highest estimated channel gain is not optimum. Rather, a preferable strategy is to linearly weight the channel estimates of different antennas differently, depending on the training scheme. We derive closed-form expressions for the symbol error probability (SEP) of AS for MPSK and MQAM in time-varying Rayleigh fading channels for arbitrary selection weights, and validate them with simulations. We then characterize explicitly the optimal selection weights that minimize the SEP. We also consider packet reception, in which multiple symbols of a packet are received by the same antenna. New suboptimal, but computationally efficient weighted selection schemes are proposed for reducing the packet error rate. The benefits of weighted selection are also demonstrated using a practical channel code used in third generation cellular systems. Our results show that optimal weighted selection yields a significant performance gain over conventional unweighted selection.
Resumo:
Tutkielmassa tarkastellaan kuluttajien näkemyksiä ilmastonmuutoksesta ja ilmastovaikutusten seuranta- ja palautejärjestelmän hyväksyttävyydestä kulutuksen ohjauskeinona. 15 kuluttajaa kokeili kuukauden ajan kulutuksen ilmastovaikutusten seuranta- ja palautejärjestelmän demonstraatioversiota ja he osallistuivat kokeilun pohjalta aihepiiriä käsitelleeseen verkkokeskusteluun. Analysoin verkkokeskustelun aineistoa arkisen järkeilyn näkökulmasta tutkien kuluttajien ilmastonmuutokseen ja ympäristövastuullisuuteen liittyvää arkitietoa sekä palvelun hyväksyttävyyteen liittyviä heuristiikkoja. Ilmastonmuutoksen todettiin yleisesti olevan vielä melko abstrakti ja monitulkintainen ilmiö, minkä vuoksi kuluttajilla on vaikeuksia ymmärtää omien valintojensa konkreettista merkitystä ilmastonmuutoksen kannalta. Vaikka tietoa kulutuksen ilmastovaikutuksista on saatavilla paljon, niin erityisesti yritysten tuottama tieto koettiin ristiriitaiseksi ja osin epäluotettavaksi. Kuluttajat myös kritisoivat ilmastonmuutoskeskustelun tarjoamaa kapeaa näkemystä kulutuksen ympäristövaikutuksista. Hiilidioksidipäästöihin keskittymisen sijaan ympäristövaikutuksia tulisi kuluttajien mielestä tarkastella kokonaisuutena, josta ilmastovaikutukset muodostavat vain yhden osan. Tutkimukseen osallistuneiden kuluttajien kulutustottumuksiin ilmastonmuutos vaikutti eriasteisesti. Toisille ilmastonmuutoksesta oli muodostunut keskeinen omaa kulutusta ohjaava normi, kun taas toiset kertoivat pohtivansa ilmastovaikutuksia pääasiassa suurimpien hankintojen kohdalla. Ympäristövastuullisuudessa merkitykselliseksi koettiin tasapainon löytäminen ja henkilökohtainen tunne siitä, että kokee toimivansa oikein. Ilmasto- tai ympäristökysymyksiä punnitaan valinnoissa joustavasti yhdessä muiden tekijöiden kanssa. Vaikka kuluttajilla toisaalta olisi tietoa ja halua ottaa ilmasto- ja ympäristövaikutukset huomioon valinnoissaan, toimintaympäristö rajaa keskeisesti kuluttajien mahdollisuuksia toimia ympäristövastuullisesti. Tutkimus toi esille neljä kuluttajien käyttämää heuristiikkaa heidän pohtiessaan ilmastovaikutusten seuranta- ja palautejärjestelmän hyväksyttävyyden ehtoja ja toimivuutta ohjauskeinona. Ensinnäkin palvelun tulee olla käytettävyydeltään nopea ja vaivaton sekä tarjota tietoa havainnollisessa ja helposti ymmärrettävässä muodossa. Toiseksi palvelun tarjoaman tiedon tulee olla ehdottoman luotettavaa ja kuluttajien valintojen kannalta merkityksellistä siten, että palvelu ottaa huomioon erilaiset kuluttajat ja tiedontarpeet. Kolmanneksi palvelu tulee toteuttaa kokonaisvaltaisesti ja läpinäkyvästi useampien kaupparyhmittymien ja julkisten toimijoiden yhteistyönä. Neljänneksi toteutuksessa tulee huomioda palvelun kannustavuus ja kytkeytyminen muihin ohjauskeinoihin.
Resumo:
Cubic pyrochlore Bi1.5Zn1.0Nb1.5O7 thin films were deposited by pulsed laser ablation on Pt(200)/SiO2/Si at 500, 550, 600, and 650 degrees C. The thin films with (222) preferred orientation were found to grow at 650 degrees C with better crystallinity which was established by the lowest full-width half maxima of similar to 0.38. The dielectric response of the thin films grown at 650 degrees C have been characterized within a temperature range of 270-650 K and a frequency window of 0.1-100 kHz. The dielectric dispersion in the thin films shows a Maxwell-Wagner type relaxation with two different kinds of response confirmed by temperature dependent Nyquist plots. The ac conduction of the films showed a varied behavior in two different frequency regions. The power law exponent values of more than 1 at high frequency are explained by a jump-relaxation-model. The possibility of grain boundary related large polaronic hopping, due to two different power law exponents and transformation of double to single response in Nyquist plots at high temperature, has been excluded. The ``attempt jump frequency'' obtained from temperature dependent tangent loss and real part of dielectric constants, has been found to lie in the range of their lattice vibronic frequencies (10(12)-10(13) Hz). The activation energy arising from a large polaronic hopping due to trapped charge at low frequency region has been calculated from the ac conduction behavior. The range of activation energies (0.26-0.59. eV) suggests that the polaronic hopping at low frequency is mostly due to oxygen vacancies. (C) 2010 American Institute of Physics. doi:10.106311.3457335]
Resumo:
The effective heating values of the above and below ground biomass components of mature Scots pine (Pinus sylvestris), Norway spruce (Picea abies), downy birch (Betula pubescens), silver birch (Betula pendula), grey alder (Alnus incana), black alder (Alnus glutinosa) and trembling aspen (Populus tremula) were studied. Each sample tree was divided into wood, bark and foliage components. Bomb calorimetry was used to determine the calorimetric heating values. The species is a significant factor in the heating value of individual tree components. The heating value of the wood proper is highest in conifers. Broad-leaved species have a higher heating value of bark than conifers. The species factor diminishes when the weighted heating value of crown, whole stems or stump-root-system are considered. The crown material has a higher heating value per unit weight in comparison with fuelwood from small-sized stems or wholetrees. The additional advantages of coniferous crown material are that it is a non-industrial biomass resource and is readily available. The variability of both the chemical composition and the heating value is small in any given tree component of any species. However, lignin, carbohydrate and extractive content were found to vary from one part of the tree to another and to correlate with the heating value.
Resumo:
The active structural component of a capacitive micromachined ultrasonic transducer (CMUT) is the top plate which vibrates under the influence of a time-varying electrostatic force thereby producing ultrasound waves of the desired frequency in the surrounding medium. Analysis of MEMS devices which rely on electrostatic actuation is complicated due to the fact that the structural deformations alter the electrostatic forces, which redistribute and modify the applied loads. Hence, it becomes imperative to consider the electrostatics-structure coupling aspect in the design of these devices. This paper presents an approximate analytical solution for the static deflection of a thin, clamped circular plate caused by electrostatic forces which are inherently nonlinear. Traditionally, finite element simulations using some commercial software such as ANSYS are employed to determine the structural deflections caused by electrostatic forces. Since the structural deformation alters the electrostatic field, a coupled-field simulation is required wherein the electrostatic mesh is continuously updated to coincide with the deflection of the structure. Such simulations are extremely time consuming, in addition to being nontransparent and somewhat hard to implement. We employ the classical thin-plate theory which is adequate when the ratio of the diameter to thickness of the plate is very large, a situation commonly prevalent in many MEMS devices, especially the CMUTs. We solve the thin-plate electrostatic-elastic equation using the Galerkin-weighted residual technique, under the assumption that the deflections are small in comparison to the thickness of the plate. The evaluation of the electrostatic force between the two plates is simplified due to the fact that the electrostatic gap is much smaller than the lateral dimensions of the device. The results obtained are compared to those found from ANSYS simulations and an excellent agreement is observed between the two. The pull-in voltage predicted by our model is close to the value predicted by ANSYS simulations.
Resumo:
Gene mapping is a systematic search for genes that affect observable characteristics of an organism. In this thesis we offer computational tools to improve the efficiency of (disease) gene-mapping efforts. In the first part of the thesis we propose an efficient simulation procedure for generating realistic genetical data from isolated populations. Simulated data is useful for evaluating hypothesised gene-mapping study designs and computational analysis tools. As an example of such evaluation, we demonstrate how a population-based study design can be a powerful alternative to traditional family-based designs in association-based gene-mapping projects. In the second part of the thesis we consider a prioritisation of a (typically large) set of putative disease-associated genes acquired from an initial gene-mapping analysis. Prioritisation is necessary to be able to focus on the most promising candidates. We show how to harness the current biomedical knowledge for the prioritisation task by integrating various publicly available biological databases into a weighted biological graph. We then demonstrate how to find and evaluate connections between entities, such as genes and diseases, from this unified schema by graph mining techniques. Finally, in the last part of the thesis, we define the concept of reliable subgraph and the corresponding subgraph extraction problem. Reliable subgraphs concisely describe strong and independent connections between two given vertices in a random graph, and hence they are especially useful for visualising such connections. We propose novel algorithms for extracting reliable subgraphs from large random graphs. The efficiency and scalability of the proposed graph mining methods are backed by extensive experiments on real data. While our application focus is in genetics, the concepts and algorithms can be applied to other domains as well. We demonstrate this generality by considering coauthor graphs in addition to biological graphs in the experiments.
Resumo:
Celiac disease is life-long autoimmune disorder of the small intestine, which is caused by a reaction to gliadin found in wheat, rye and barley in genetically predisposed individuals. Proline- and glutamine -rich proteins cause villous atrophy and crypt hyperplasia with extensive inflammation in the epithelium and lamina propria. Symptoms of celiac disease vary considerably and elimination of gluten from diet is the only way to treat disease. In small intestine of celiac disease patient transglutaminase 2 (TG2) modifies gluten peptides, which causes T-cell activation and inflammation in the epithelium of mucosa. T-cell activation induces development of celiac disease specific antibodies. These celiac disease specific antibodies recognise TG2 and interfere in vitro and in vivo in angiogenesis. Abnormal angiogenesis is typical in many disorders, such in cancer, in which TG2 has a crucial role in the development and growth of tumor. Overexpression of TG2 has been shown to correlate with accelerated growth of tumor. TG2-specific antibodies are suggested to inhibit differentation of epithelial cell, increase their proliferation, decrease their barrier-function and increase the permeability of blood vessels. The aims of the pilot study were to establish whether celiac disease TG2 antibodies affect in vivo tumorigenesis and tumorangiogenesis as well as to try to clarify the mechanism behind the phenomenon. Tumor xenograft model was used in severe combined immunodeficient (SCID) mice. Human oesophageal carcinoma (OE-19) cancer cells were incubated with celiacs TG2 miniautoantibody (mini 2.8), non-celiac miniautoantibody (mini 6.2) or PBS before cancer cells were injected to mice subcutaneously. During the experiment mice were weighted and tumor size was measured couple of times per week. To estimate the volumes of tumors the following formula was used: π/6 * L* W* H. Experiment lasted for four weeks after which the mice were euthanized, cardiac blood and tissue samples taken and tumours were excised and weighted. Sections were made from tumors and immunohistochemical stainings were done to compare blood vessel areas and to study general tumors´morphology and other parameters. Western blot -analyse were performed to cancer cells. The masses and volumes were clearly smaller in mini 2.8-group compared to control groups and the necrotic area of tumor in mini 2.8 was smallest as percentage compared to control groups. Blood vessel area were smallest in mini 2.8 group. Results suggest that celiac disease anti-TG2-autoantibodies inhibit tumor growth, but the number of animals is insufficient to give an accurate outcome.
Resumo:
In the present study silver nanoparticles were rapidly synthesized at room temperature by treating silver ions with the Citrus limon (lemon) extract The effect of various process parameters like the reductant con centration mixing ratio of the reactants and the concentration of silver nitrate were studied in detail In the standardized process 10(-2) M silver nitrate solution was interacted for 411 with lemon Juice (2% citric acid concentration and 0 5% ascorbic acid concentration) in the ratio of 1 4(vol vol) The formation of silver nanoparticles was confirmed by Surface Plasmon Resonance as determined by UV-Visible spectra in the range of 400-500 nm X ray diffraction analysis revealed the distinctive facets (1 1 1 200 220 2 2 2 and 3 1 1 planes) of silver nanoparticles We found that citric acid was the principal reducing agent for the nanosynthesis process FT IR spectral studies demonstrated citric acid as the probable stabilizing agent Silver nanoparticles below 50 nm with spherical and spheroidal shape were observed from transmission electron microscopy The correlation between absorption maxima and particle sizes were derived for different UV-Visible absorption maxima (corresponding to different citric acid concentrations) employing MiePlot v 3 4 The theoretical particle size corresponding to 2% citric acid concentration was corn pared to those obtained by various experimental techniques like X ray diffraction analysis atomic force microscopy and transmission electron microscopy (C) 2010 Elsevier B V All rights reserved
Resumo:
Toeplitz operators are among the most important classes of concrete operators with applications to several branches of pure and applied mathematics. This doctoral thesis deals with Toeplitz operators on analytic Bergman, Bloch and Fock spaces. Usually, a Toeplitz operator is a composition of multiplication by a function and a suitable projection. The present work deals with generalizing the notion to the case where the function is replaced by a distributional symbol. Fredholm theory for Toeplitz operators with matrix-valued symbols is also considered. The subject of this thesis belongs to the areas of complex analysis, functional analysis and operator theory. This work contains five research articles. The articles one, three and four deal with finding suitable distributional classes in Bergman, Fock and Bloch spaces, respectively. In each case the symbol class to be considered turns out to be a certain weighted Sobolev-type space of distributions. The Bergman space setting is the most straightforward. When dealing with Fock spaces, some difficulties arise due to unboundedness of the complex plane and the properties of the Gaussian measure in the definition. In the Bloch-type spaces an additional logarithmic weight must be introduced. Sufficient conditions for boundedness and compactness are derived. The article two contains a portion showing that under additional assumptions, the condition for Bergman spaces is also necessary. The fifth article deals with Fredholm theory for Toeplitz operators having matrix-valued symbols. The essential spectra and index theorems are obtained with the help of Hardy space factorization and the Berezin transform, for instance. The article two also has a part dealing with matrix-valued symbols in a non-reflexive Bergman space, in which case a condition on the oscillation of the symbol (a logarithmic VMO-condition) must be added.
Resumo:
We present a distributed algorithm that finds a maximal edge packing in O(Δ + log* W) synchronous communication rounds in a weighted graph, independent of the number of nodes in the network; here Δ is the maximum degree of the graph and W is the maximum weight. As a direct application, we have a distributed 2-approximation algorithm for minimum-weight vertex cover, with the same running time. We also show how to find an f-approximation of minimum-weight set cover in O(f2k2 + fk log* W) rounds; here k is the maximum size of a subset in the set cover instance, f is the maximum frequency of an element, and W is the maximum weight of a subset. The algorithms are deterministic, and they can be applied in anonymous networks.
Resumo:
We present a distributed 2-approximation algorithm for the minimum vertex cover problem. The algorithm is deterministic, and it runs in (Δ + 1)2 synchronous communication rounds, where Δ is the maximum degree of the graph. For Δ = 3, we give a 2-approximation algorithm also for the weighted version of the problem.
Resumo:
We present a distributed 2-approximation algorithm for the minimum vertex cover problem. The algorithm is deterministic, and it runs in (Δ + 1)2 synchronous communication rounds, where Δ is the maximum degree of the graph. For Δ = 3, we give a 2-approximation algorithm also for the weighted version of the problem.
Resumo:
The influence of gold (similar to 35 nm diameter) as well as ReO3 (similar to 17 nm diameter) nanoparticles placed atop silicon photovoltaic devices on absorption and photocurrent generation has been investigated. The nanoparticles improve the power transmission into the semiconductor and consequently, the photocurrent response at wavelengths corresponding to plasmon absorption. An increase in short circuit current up to 4.5% under simulated solar irradiation was observed with the ReO3 nanoparticles, while the gold nanoparticles showed enhancements up to 6.5%. The increase in photocurrent is observed at wavelengths corresponding to the maxima in the surface plasmon resonance absorption spectra. (C) 2010 The Japan Society of Applied Physics