Desempenho agronômico, bromatológico e estabilidade fenotípica de sorgo silageiro em Uberlândia - MG

Sorghum (Sorghum bicolor (L.) Moench) is a good alternative to be used as silage, especially in places with water scarcity and high temperatures, due to their morphological and physiological characteristics. The appropriate management, as the ideal seeding time, interferes both productivity and the quality of silage. The work was conducted with the objective of evaluating the agronomic and bromatological performance of varieties and hybrids of silage sorghum and their phenotypic stability in two seasons, season and off-season, in the city of Uberlândia, Minas Gerais. The experiments were performed at Capim Branco Experimental Farm of Federal University of Uberlândia (UFU), located in the referred city. There were two sowing dates in the same experimental area, off-season (March to June 2014) and season (November 2014 to March 2015), and the varieties and hybrids were evaluated in both situations. The design was a randomized block with 25 treatments (hybrids and varieties of sorghum) and three replications. Agronomical and bromatological data were subjected to an analysis of variance; averages were grouped by Scott-Knott test at 5% of probability, through Genes computer program; and to estimate the stability, it was opted for Annicchiarico method. The flowering of cultivars, dry matter productivity, plant height, Acid Detergent Fiber (ADF), Neutral Detergent Fiber (NDF) and Crude Protein (CP) are affected by the environment and the variety. Regarding productivity and quality of the fiber, SF11 variety was superior, independent of the rated environment. In relation to the performance stability of dry matter, the varieties SF15, SF11, SF25, PROG 134 IPA, 1141572, 1141570 and 1141562 were highlighted. For the stability of the quality of fibers (FDA and FDN), the variety 1141562 stood out. The environment reduces the expression of characters “days of flowering”, “plant height” and “productivity of dry matter of hybrids”. From the 25 hybrids analyzed for productivity and stability of dry matter performance, seven were highlighted, regardless of the rated environment: Volumax commercial hybrid and experiments 12F39006, 12F39007, 12F37014, 12F39014, 12F38009 and 12F02006.

Avaliação da incerteza de medição no Setor Médico-hospitalar

This study aims to evaluate the uncertainty associated with measurements made by aneroid sphygmomanometer, neonatal electronic balance and electrocautery. Therefore, were performing repeatability tests on all devices for the subsequent execution of normality tests using Shapiro-Wilk; identification of influencing factors that affect the measurement result of each measurement; proposition of mathematical models to calculate the measurement uncertainty associated with measuring evaluated for all equipament and calibration for neonatal electronic balance; evaluation of the measurement uncertainty; and development of a computer program in Java language to systematize the calibration uncertainty of estimates and measurement uncertainty. It was proposed and carried out 23 factorial design for aneroid sphygmomanometer order to investigate the effect of temperature factors, patient and operator and another 32 planning for electrocautery, where it investigated the effects of temperature factors and output electrical power. The expanded uncertainty associated with the measurement of blood pressure significantly reduced the extent of the patient classification tracks. In turn, the expanded uncertainty associated with the mass measurement with neonatal balance indicated a variation of about 1% in the dosage of medication to neonates. Analysis of variance (ANOVA) and the Turkey test indicated significant and indirectly proportional effects of temperature factor in cutting power values and clotting indicated by electrocautery and no significant effect of factors investigated for aneroid sphygmomanometer.

Utilização de pulsos de radiofrequência fortemente modulados no processamento de informação quântica via ressonância magnética nuclear

Nesta dissertação apresentamos um trabalho de desenvolvimento e utilização de pulsos de radiofreqüência modulados simultaneamente em freqüência, amplitude e fase (pulsos fortemente modulados, SMP, do inglês Strongly Modulated Pulses) para criar estados iniciais e executar operações unitárias que servem como blocos básicos para processamento da informação quântica utilizando Ressonância Magnética Nuclear (RMN). As implementações experimentais foram realizas em um sistema de 3 q-bits constituído por spins nucleares de Césio 133 (spin nuclear 7/2) em uma amostra de cristal líquido em fase nemática. Os pulsos SMP´s foram construídos teoricamente utilizando um programa especialmente desenvolvido para esse fim, sendo o mesmo baseado no processo de otimização numérica Simplex Nelder-Mead. Através deste programa, os pulsos SMP foram otimizados de modo a executarem as operações lógicas desejadas com durações consideravelmente menores que aquelas realizadas usando o procedimento usual de RMN, ou seja, seqüências de pulsos e evoluções livres. Isso tem a vantagem de reduzir os efeitos de descoerência decorrentes da relaxação do sistema. Os conceitos teóricos envolvidos na criação dos SMPs são apresentados e as principais dificuldades (experimentais e teóricas) que podem surgir devido ao uso desses procedimentos são discutidas. Como exemplos de aplicação, foram produzidos os estados pseudo-puros usados como estados iniciais de operações lógicas em RMN, bem como operações lógicas que foram posteriormente aplicadas aos mesmos. Utilizando os SMP\'s também foi possível realizar experimentalmente os algoritmos quânticos de Grover e Deutsch-Jozsa para 3 q-bits. A fidelidade das implementações experimentais foi determinadas utilizando as matrizes densidade experimentais obtidas utilizando um método de tomografia da matriz densidade previamente desenvolvido.

The lost experiment in exploration and exploitation

This paper focuses on James March’s 1991 article on ‘Exploration and Exploitation in Organizational Learning’, which is now the seventh most highly cited paper in management and organisation studies. March’s paper is based on a computer program that simulates the collective and individual learning of a group of fifty individuals. The largely forgotten story that this paper re-calls is the real-life experiment that March, in large part, designed and conducted when he was the new ‘boy Dean’ of the School of Social Sciences in the University of California at Irvine between 1964 and 1969. Taken together, both stories illuminate important moments in the history of organisation studies. The comparison suggests that March’s model, which was probably the first simulation of an organisation learning, also worked to constitute rather than model the phenomenon.

Dificultades del profesorado para planificar, coordinar y evaluar competencias claves. Un análisis desde la Inspección de Educación.

Este artículo presenta una investigación en la que se analizan las dificultades del profesorado para planificar, coordinar y evaluar competencias claves en una muestra de 23 centros educativos. El tema tiene hondas repercusiones ya que una mala praxis educativa de las competencias claves puede conculcar uno de los derechos fundamentales del alumnado a ser evaluado de forma objetiva (LODE: Art.6b y RD 732/1995: Art. 13.1) y poder superar las pruebas de evaluación consideradas necesarias para la obtención del título académico mínimo que otorga el estado español. La investigación se ha desarrollado desde una doble perspectiva metodológica; en primer lugar, es una investigación descriptiva en la que presentamos las características fundamentales de las competencias claves y la normativa básica para su desarrollo y evaluación. En segundo lugar,  aplicamos un procedimiento de análisis con una doble vertiente cualitativa mediante el empleo del programa Atlas-Ti y del enfoque reticular-categorial del análisis de redes sociales con la aplicación de UCINET y el visor yED Graph Editor para abordar el análisis de las principales dificultades y obstáculos detectados. Los resultados muestran que existen serias dificultades en las tres dimensiones analizadas: "planificación", "coordinación" y "evaluación" de competencias clave; especialmente en la necesidad de formación del profesorado, en la evaluación de las competencias, en la metodología para su desarrollo y en los procesos de coordinación interna para su consecución en los centros educativos.

Who is in charge? An L2 Discourse Intonation Study on Four Prosodic Parameters to Exert the Pragmatic Function of Dominance and Control in the Context of L2 Non-specialist Public Speaking

This paper reports the findings from a study of the learning of English intonation by Spanish speakers within the discourse mode of L2 oral presentation. The purpose of this experiment is, firstly, to compare four prosodic parameters before and after an L2 discourse intonation training programme and, secondly, to confirm whether subjects, after the aforementioned L2 discourse intonation training, are able to match the form of these four prosodic parameters to the discourse-pragmatic function of dominance and control. The study designed the instructions and tasks to create the oral and written corpora and Brazil’s Pronunciation for Advanced Learners of English was adapted for the pedagogical aims of the present study. The learners’ pre- and post-tasks were acoustically analysed and a pre / post- questionnaire design was applied to interpret the acoustic analysis. Results indicate most of the subjects acquired a wider choice of the four prosodic parameters partly due to the prosodically-annotated transcripts that were developed throughout the L2 discourse intonation course. Conversely, qualitative and quantitative data reveal most subjects failed to match the forms to their appropriate pragmatic functions to express dominance and control in an L2 oral presentation.

2005 Seat Belt Usage Survey, June 12, 2006

During the spring and summer of 2005, two surveys were taken of motor vehicle drivers’ and passengers’ seat belt usage. These surveys are before and after parts of the “Click it or Ticket” education and enforcement campaign. The whole project starts with a pre-campaign survey followed by the four-week public information, education and enforcement campaign. Finally, the postcampaign survey is taken to test the effectiveness of the education and enforcement campaign. In the pre-campaign survey of seat belt usage, the usage/non-usage of 15,444 front seat occupants of cars, vans, SUVs and pickups were observed at 100 locations. In the post-campaign survey of seat belt usage, 15,731 observations were made of front seat occupants of cars, vans, SUVs and pickups. The day of the week and time of day the observations took place were selected for each site using a random number generation computer program.

Page Composition using PPML as a Link-editing Script

The advantages of a COG (Component Object Graphic) approach to the composition of PDF pages have been set out in a previous paper [1]. However, if pages are to be composed in this way then the individual graphic objects must have known bounding boxes and must be correctly placed on the page in a process that resembles the link editing of a multi-module computer program. Ideally the linker should be able to utilize all declared resource information attached to each COG. We have investigated the use of an XML application called Personalized Print Markup Language (PPML) to control the link editing process for PDF COGs. Our experiments, though successful, have shown up the shortcomings of PPML's resource handling capabilities which are currently active at the document and page levels but which cannot be elegantly applied to individual graphic objects at a sub-page level. Proposals are put forward for modifications to PPML that would make easier any COG-based approach to page composition.

Projeto de estabilidade de um edifício para uma sala elétrica em betão armado e estrutura metálica

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização Estruturas

New developments in UAV remote sensing for pest management and the implications for cotton

Efficient crop monitoring and pest damage assessments are key to protecting the Australian agricultural industry and ensuring its leading position internationally. An important element in pest detection is gathering reliable crop data frequently and integrating analysis tools for decision making. Unmanned aerial systems are emerging as a cost-effective solution to a number of precision agriculture challenges. An important advantage of this technology is it provides a non-invasive aerial sensor platform to accurately monitor broad acre crops. In this presentation, we will give an overview on how unmanned aerial systems and machine learning can be combined to address crop protection challenges. A recent 2015 study on insect damage in sorghum will illustrate the effectiveness of this methodology. A UAV platform equipped with a high-resolution camera was deployed to autonomously perform a flight pattern over the target area. We describe the image processing pipeline implemented to create a georeferenced orthoimage and visualize the spatial distribution of the damage. An image analysis tool has been developed to minimize human input requirements. The computer program is based on a machine learning algorithm that automatically creates a meaningful partition of the image into clusters. Results show the algorithm delivers decision boundaries that accurately classify the field into crop health levels. The methodology presented in this paper represents a venue for further research towards automated crop protection assessments in the cotton industry, with applications in detecting, quantifying and monitoring the presence of mealybugs, mites and aphid pests.

Technical and Didactical Scenarios of Student-centered Teaching and Learning

In this paper we envision didactical concepts for university education based on self-responsible and project-based learning and outline principles of adequate technical support. We use the scenario technique describing how a fictive student named Anna organizes her studies of informatics at a fictive university from the first days of her studies to make a career for herself.(DIPF/Orig.)

Correlação entre o sinal mecanomiográfico e a escala modificada de Ashworth durante avaliação clínica da espasticidade

Spasticity is a common disorder in people who have upper motor neuron injury. The involvement may occur at different levels. The Modified Ashworth Scale (MAS) is the most used method to measure involvement levels. But it corresponds to a subjective evaluation. Mechanomyography (MMG) is an objective technique that quantifies the muscle vibration during the contraction and stretching events. So, it may assess the level of spasticity accurately. This study aimed to investigate the correlation between spasticity levels determined by MAS with MMG signal in spastic and not spastic muscles. In the experimental protocol, we evaluated 34 members of 22 volunteers, of both genders, with a mean age of 39.91 ± 13.77 years. We evaluated the levels of spasticity by MAS in flexor and extensor muscle groups of the knee and/or elbow, where one muscle group was the agonist and one antagonist. Simultaneously the assessment by the MAS, caught up the MMG signals. We used a custom MMG equipment to register and record the signals, configured in LabView platform. Using the MatLab computer program, it was processed the MMG signals in the time domain (median energy) and spectral domain (median frequency) for the three motion axes: X (transversal), Y (longitudinal) and Z (perpendicular). For bandwidth delimitation, we used a 3rd order Butterworth filter, acting in the range of 5-50 Hz. Statistical tests as Spearman's correlation coefficient, Kruskal-Wallis test and linear correlation test were applied. As results in the time domain, the Kruskal-Wallis test showed differences in median energy (MMGME) between MAS groups. The linear correlation test showed high linear correlation between MAS and MMGME for the agonist muscle as well as for the antagonist group. The largest linear correlation occurred between the MAS and MMG ME for the Z axis of the agonist muscle group (R2 = 0.9557) and the lowest correlation occurred in the X axis, for the antagonist muscle group (R2 = 0.8862). The Spearman correlation test also confirmed high correlation for all axes in the time domain analysis. In the spectral domain, the analysis showed an increase in the median frequency (MMGMF) in MAS’ greater levels. The highest correlation coefficient between MAS and MMGMF signal occurred in the Z axis for the agonist muscle group (R2 = 0.4883), and the lowest value occurred on the Y axis for the antagonist group (R2 = 0.1657). By means of the Spearman correlation test, the highest correlation occurred between the Y axis of the agonist group (0.6951; p <0.001) and the lowest value on the X axis of the antagonist group (0.3592; p <0.001). We conclude that there was a significantly high correlation between the MMGME and MAS in both muscle groups. Also between MMG and MAS occurred a significant correlation, however moderate for the agonist group, and low for the antagonist group. So, the MMGME proved to be more an appropriate descriptor to correlate with the degree of spasticity defined by the MAS.

Avaliação de hábitos de consumo e adequação nutricional de refeições rápidas cuja base é o pão

As rápidas alterações sociais, económicas, culturais e ambientais determinaram mudanças significativas nos estilos de vida e contribuíram para o crescimento e generalização do consumo de alimentos e refeições fora de casa. Portugal acompanha a tendência de aumento do consumo alimentar fora de casa, assim, as refeições fora de casa, que há uns anos eram um acontecimento fortuito, são hoje uma prática habitual das famílias portuguesas, não só durante a semana de trabalho, mas também nos fins-de-semana. As, visitas aos centros comerciais que se tornaram um hábito no nosso país incluem uma paragem nas Praças de Alimentação, espaços de excelência pela diversidade alimentar onde predominam as refeições de fast-food. Porém é fundamental a escolha adequada/equilibrada dos alimentos que se vão consumir. O presente trabalho procurou avaliar os hábitos e percepção dos consumidores de refeições rápidas com base numa ementa específica cujo alimento principal é o pão. Posteriormente e de acordo com as preferências de consumo procedeu-se à avaliação nutricional das escolhas. Neste estudo participaram 150 indivíduos que frequentaram as instalações de um restaurante de comida rápida situada na praça de alimentação de um centro comercial situado em Viseu. Foi aplicado um questionário de autopreenchimento, por nós elaborado dividido em 4 partes: caracterização sociodemográfica; hábitos de consumo dos inquiridos; produtos escolhidos pelos inquiridos; grau de satisfação face aos produtos escolhidos. As análises estatísticas foram efectuadas com recurso ao Programa informático Statistical Package for the Social Sciences - SPSS® for Windows, versão 22. Realizam-se testes de Qui-quadrado com simulação de Monte Carlo, considerando o nível de significância de 0,05. Com base nas escolhas mais frequentes feitas pelos inquiridos procedeu-se à avaliação nutricional dos menus recorrendo ao programa DIAL 1.19 versão 1 e quando não se encontrou informação neste utilizou-se a tabela de composição de alimentos portugueses on line (INSA, 2010). Compararam-se os valores obtidos para o Valor Calórico Total, os macronutrientes, a fibra, o colesterol e o sódio com as Doses Diárias Recomendadas. A amostra era composta por 68,7% mulheres e 31,3% homens, com uma média de idades de 29,9 ± 3 anos e, maioritariamente empregados (64,7%). O grau de instrução da maioria dos inquiridos (54,7%) era o ensino superior. Grande parte da amostra não se considera consumidora habitual de fast-food,referindo ainda efectuar frequentemente uma alimentação equilibrada. Sendo que apenas 5 % frequenta as instalações mais de uma vez por semana. De entre os produtos disponíveis, a preferência fez-se pela sandes e batata-frita, sendo o momento de maior consumo o almoçoA avaliação nutricional das escolhas preferenciais dos inquiridos mostrou que o VCT do menu que inclui água como bebida está dentro dos limites calóricos preconizados para o almoço excepção feita ao menu que inclui sandes quente de frango em pão de orégãos e sandes fria de queijo fresco que se destacam por apresentar um valor inferior ao limite mínimo recomendado. Pelo contrário, a inclusão no menu do refrigerante faz com que haja um aumento do VCT, independentemente da sandes considerada, em 18%. Uma análise detalhada mostra que estas ementas são desequilibradas, apresentando 33,3% delas valores de proteínas superiores à DDR enquanto que os valores de HC e lípidos se encontram maioritariamente dentro dos limites havendo apenas 13,3% das ementas fora desses valores. Relativamente ao aporte de fibra e de sódio 86,7% das ementas aparecem desenquadradas com valores excessivos de sódio e valores de fibra 33% abaixo do limite mínimo recomendado. Tratando-se de um estudo de caso em que apenas se inclui um único restaurante de uma praça de alimentação, que fornece ementas à base de pão (sandes) os resultados são interpretados de forma cautelosa e sem generalização. Podemos no entanto concluir, face aos resultados obtidos a necessidade de redução do teor de sal das ementas. Para além disso parece-nos fundamental, para que o consumidor possa comparar opções alimentares e tomar decisões informadas, a disponibilização da informação nutricional das ementas propostas.

Soft computing based parameter identification in pavements and geomechanical systems

Accurate estimation of road pavement geometry and layer material properties through the use of proper nondestructive testing and sensor technologies is essential for evaluating pavement’s structural condition and determining options for maintenance and rehabilitation. For these purposes, pavement deflection basins produced by the nondestructive Falling Weight Deflectometer (FWD) test data are commonly used. The nondestructive FWD test drops weights on the pavement to simulate traffic loads and measures the created pavement deflection basins. Backcalculation of pavement geometry and layer properties using FWD deflections is a difficult inverse problem, and the solution with conventional mathematical methods is often challenging due to the ill-posed nature of the problem. In this dissertation, a hybrid algorithm was developed to seek robust and fast solutions to this inverse problem. The algorithm is based on soft computing techniques, mainly Artificial Neural Networks (ANNs) and Genetic Algorithms (GAs) as well as the use of numerical analysis techniques to properly simulate the geomechanical system. A widely used pavement layered analysis program ILLI-PAVE was employed in the analyses of flexible pavements of various pavement types; including full-depth asphalt and conventional flexible pavements, were built on either lime stabilized soils or untreated subgrade. Nonlinear properties of the subgrade soil and the base course aggregate as transportation geomaterials were also considered. A computer program, Soft Computing Based System Identifier or SOFTSYS, was developed. In SOFTSYS, ANNs were used as surrogate models to provide faster solutions of the nonlinear finite element program ILLI-PAVE. The deflections obtained from FWD tests in the field were matched with the predictions obtained from the numerical simulations to develop SOFTSYS models. The solution to the inverse problem for multi-layered pavements is computationally hard to achieve and is often not feasible due to field variability and quality of the collected data. The primary difficulty in the analysis arises from the substantial increase in the degree of non-uniqueness of the mapping from the pavement layer parameters to the FWD deflections. The insensitivity of some layer properties lowered SOFTSYS model performances. Still, SOFTSYS models were shown to work effectively with the synthetic data obtained from ILLI-PAVE finite element solutions. In general, SOFTSYS solutions very closely matched the ILLI-PAVE mechanistic pavement analysis results. For SOFTSYS validation, field collected FWD data were successfully used to predict pavement layer thicknesses and layer moduli of in-service flexible pavements. Some of the very promising SOFTSYS results indicated average absolute errors on the order of 2%, 7%, and 4% for the Hot Mix Asphalt (HMA) thickness estimation of full-depth asphalt pavements, full-depth pavements on lime stabilized soils and conventional flexible pavements, respectively. The field validations of SOFTSYS data also produced meaningful results. The thickness data obtained from Ground Penetrating Radar testing matched reasonably well with predictions from SOFTSYS models. The differences observed in the HMA and lime stabilized soil layer thicknesses observed were attributed to deflection data variability from FWD tests. The backcalculated asphalt concrete layer thickness results matched better in the case of full-depth asphalt flexible pavements built on lime stabilized soils compared to conventional flexible pavements. Overall, SOFTSYS was capable of producing reliable thickness estimates despite the variability of field constructed asphalt layer thicknesses.

Adaptação do paradigma orientado a notificações para desenvolvimento de sistemas fuzzy

This work proposes to adjust the Notification Oriented Paradigm (NOP) so that it provides support to fuzzy concepts. NOP is inspired by elements of imperative and declarative paradigms, seeking to solve some of the drawbacks of both. By decomposing an application into a network of smaller computational entities that are executed only when necessary, NOP eliminates the need to perform unnecessary computations and helps to achieve better logical-causal uncoupling, facilitating code reuse and application distribution over multiple processors or machines. In addition, NOP allows to express the logical-causal knowledge at a high level of abstraction, through rules in IF-THEN format. Fuzzy systems, in turn, perform logical inferences on causal knowledge bases (IF-THEN rules) that can deal with problems involving uncertainty. Since PON uses IF-THEN rules in an alternative way, reducing redundant evaluations and providing better decoupling, this research has been carried out to identify, propose and evaluate the necessary changes to be made on NOP allowing to be used in the development of fuzzy systems. After that, two fully usable materializations were created: a C++ framework, and a complete programming language (LingPONFuzzy) that provide support to fuzzy inference systems. From there study cases have been created and several tests cases were conducted, in order to validate the proposed solution. The test results have shown a significant reduction in the number of rules evaluated in comparison to a fuzzy system developed using conventional tools (frameworks), which could represent an improvement in performance of the applications.