Päivä päivältä enemmän ja enemmän : Suomen toistokonstruktioita

Day by day more and more. Repetitive constructions in Finnish The study describes syntactic repetition in Finnish. Under investigation are short repetitive constructions in which the construction is connected by a morpheme, for example, päivä päivältä day by day , uudelleen ja uudelleen again and again . The study is a qualitative corpus-based study. It has three study questions. First, the study analyses the grammatical structure of repetitive constructions. Secondly, repetition is an iconic phenomenon, and the study investigates the motivation for repetition. Why and where is repetition used? Thirdly, the study will tentatively explain the syntactic productivity of the constructions. Syntactic repetition has semantic and pragmatic functions of which three are the most interesting. Firstly, it changes the aspectual interpretation of utterances. Durative situations become continuative, and semelfactive iterative. Secondly, repetition is also used to intensify expressions. Thirdly, repetition can be used to express superlative meanings. Repetition has many pragmatic functions. For example, it carries affective meanings in conversation. Repetition can also be used as an expressive tool in narrative contexts.

The complexities of knowing what it is you are trapping

The effectiveness of any trapping system is highly dependent on the ability to accurately identify the specimens collected. For many fruit fly species, accurate identification (= diagnostics) using morphological or molecular techniques is relatively straightforward and poses few technical challenges. However, nearly all genera of pest tephritids also contain groups of species where single, stand-alone tools are not sufficient for accurate identification: such groups include the Bactrocera dorsalis complex, the Anastrepha fraterculus complex and the Ceratitis FAR complex. Misidentification of high-impact species from such groups can have dramatic consequences and negate the benefits of an otherwise effective trapping program. To help prevent such problems, this chapter defines what is meant by a species complex and describes in detail how the correct identification of species within a complex requires the use of an integrative taxonomic approach. Integrative taxonomy uses multiple, independent lines of evidence to delimit species boundaries, and the underpinnings of this approach from both the theoretical speciation literature and the systematics/taxonomy literature are described. The strength of the integrative approach lies in the explicit testing of hypotheses and the use of multiple, independent species delimitation tools. A case is made for a core set of species delimitation tools (pre- and post-zygotic compatibility tests, multi-locus phylogenetic analysis, chemoecological studies, and morphometric and geometric morphometric analyses) to be adopted as standards by tephritologists aiming to resolve economically important species complexes. In discussing the integrative approach, emphasis is placed on the subtle but important differences between integrative and iterative taxonomy. The chapter finishes with a case study that illustrates how iterative taxonomy applied to the B. dorsalis species complex led to incorrect taxonomic conclusions, which has had major implications for quarantine, trade, and horticultural pest management. In contrast, an integrative approach to the problem has resolved species limits in this taxonomically difficult group, meaning that robust diagnostics are now available.

Evolution of cooperation by reciprocation within structured demes

The iterative two-person Prisoners’ Dilemma game has been generalised to theN-person case. The evolution of cooperation is explored by matching the Tit For Tat (TFT) strategy (Axelrod and Hamilton 1981) against the selfish strategy. Extension of TFT toN-person situations yields a graded set of strategies from the softest TFT, which continues cooperation even if only one of the opponents reciprocates it, to the hardest, which would do so only when all the remaining opponents cooperate. The hardest TFT can go to fixation against the selfish strategy provided it crosses a threshold frequencypc. All the other TFT are invadable by the selfish (D) or the pure defector strategy, while none can invadeD. Yet, provided a thresholdpc is crossed, they can coexist stably withD. AsN, the size of the group increases, the threshold pc also increases, indicating that the evolution of cooperation is more difficult for larger groups. Under certain conditions, only the soft TFT can coexist stably against the selfish strategyD, while the harder ones cannot. An interesting possibility of a complete takeover of the selfish population by successive invasions by harder and harder TFT strategies is also presented.

Assessing organizational culture in complex sociotechnical systems : Methodological evidence from studies in nuclear power plant maintenance organizations

Failures in industrial organizations dealing with hazardous technologies can have widespread consequences for the safety of the workers and the general population. Psychology can have a major role in contributing to the safe and reliable operation of these technologies. Most current models of safety management in complex sociotechnical systems such as nuclear power plant maintenance are either non-contextual or based on an overly-rational image of an organization. Thus, they fail to grasp either the actual requirements of the work or the socially-constructed nature of the work in question. The general aim of the present study is to develop and test a methodology for contextual assessment of organizational culture in complex sociotechnical systems. This is done by demonstrating the findings that the application of the emerging methodology produces in the domain of maintenance of a nuclear power plant (NPP). The concepts of organizational culture and organizational core task (OCT) are operationalized and tested in the case studies. We argue that when the complexity of the work, technology and social environment is increased, the significance of the most implicit features of organizational culture as a means of coordinating the work and achieving safety and effectiveness of the activities also increases. For this reason a cultural perspective could provide additional insight into the problem of safety management. The present study aims to determine; (1) the elements of the organizational culture in complex sociotechnical systems; (2) the demands the maintenance task sets for the organizational culture; (3) how the current organizational culture at the case organizations supports the perception and fulfilment of the demands of the maintenance work; (4) the similarities and differences between the maintenance cultures at the case organizations, and (5) the necessary assessment of the organizational culture in complex sociotechnical systems. Three in-depth case studies were carried out at the maintenance units of three Nordic NPPs. The case studies employed an iterative and multimethod research strategy. The following methods were used: interviews, CULTURE-survey, seminars, document analysis and group work. Both cultural analysis and task modelling were carried out. The results indicate that organizational culture in complex sociotechnical systems can be characterised according to three qualitatively different elements: structure, internal integration and conceptions. All three of these elements of culture as well as their interrelations have to be considered in organizational assessments or important aspects of the organizational dynamics will be overlooked. On the basis of OCT modelling, the maintenance core task was defined as balancing between three critical demands: anticipating the condition of the plant and conducting preventive maintenance accordingly, reacting to unexpected technical faults and monitoring and reflecting on the effects of maintenance actions and the condition of the plant. The results indicate that safety was highly valued at all three plants, and in that sense they all had strong safety cultures. In other respects the cultural features were quite different, and thus the culturally-accepted means of maintaining high safety also differed. The handicraft nature of maintenance work was emphasised as a source of identity at the NPPs. Overall, the importance of safety was taken for granted, but the cultural norms concerning the appropriate means to guarantee it were little reflected. A sense of control, personal responsibility and organizational changes emerged as challenging issues at all the plants. The study shows that in complex sociotechnical systems it is both necessary and possible to analyse the safety and effectiveness of the organizational culture. Safety in complex sociotechnical systems cannot be understood or managed without understanding the demands of the organizational core task and managing the dynamics between the three elements of the organizational culture.

Onko varhaisen tuen päiväkoti mahdollinen? : Tutkimus varhaiskasvatuksen yhteisöllisestä kehittämisestä

Is the early childhood day care facility possible? The research considering communal development of the early education. In Finland mothers and fathers look after 400 000 pre-school children. Half of these attend day care facilities, in which 50 000 staff are employed. The aim of this research is to develop co-operation practices within the day care centre. This research refines and expands my own interest in and knowledge of day care management and content development. The basis of the research draws upon ethnographic material covering the period 1999–2005. The day care centre chosen as a central informant was the first suburban centre founded in 1963, and it provided a rich local and welfare state research perspective. It became clear that the day care facility’s co-operation practices formed the basis of bringing up children and at the same time produced a new multi-operational and multi-layered community for child participation. Adult day care centre workers bringing up the children as a professional work and solutions defining the conditions for the work are expressed in a child’s upbringing. This obviously has an impact in where as the development of communities. From the human and community scientific point of view, the group of youngest children will take up a future position as key players in communities as essential actors and reformers. The research was carried out as multiphase and multiscientific practical research and iterative data formation. The results verified that the co-operation between parents and day care staff produces important benefits for all the stakeholders. However, the day care staff has difficulties in implementing the benefits. During the research process, it became clear that conceptually day care staff saw the practices as ”very important, but not easily realised in practice”. As a result this demanded further research to address this issue and to extend this to the carefacility’s co-operation practises and their communal and social conditions. The research looks at the carefacility’s co-operation with key stakeholders. At the same time it undertakes an analytical and historical examination of carefacilitys’s with an experimental focus as two day care centres chosen as experimental objects. The results of the research showed that the benefits gained by children were determined by the day care centre’s socio-political structure and the parent’s resources. The research framework categorised early childhood education as generational and gender based structures. As part of the research, the strains endemic to these formations have been examined. The system for bringing up children was created as part of a so called welfare state project by implemented by the Day Care Act in year 1973. The law secured the subjective right for every pre-school child to have access to day care facilities. The law also introduced a labour and sosiopolitical phase and the refinement of the day care facility’s education-care concept. The latest phase that started during the early 1990´s was called the market-based social services strategy. As a result of this phase, state support was limited and the screening function of the law was relaxed. This new strategy resulted in a divisive and bureaucratic social welfare system, that individualised and segregated children and their parents, leaving some families outside the communal and welfare state benefit net. The modern day care centre is a hybrid of different aims. Children spend longer and more irregular time in day care. The families are multicultural and that requires more training for the staff. The work in day care has been enhanced, for example he level of education for the staff has been lowered and productivity has been improved. However, administrative work and different kinds of support and net work functions together with the continuous change have taken over from the work done face to face with children. Staff experiences more pressure as the management and the work load has increased. Consequently the long-term planning and daily implementation of the nuclear task of the day care facility is difficult to control. This will have an effect on both motivation and manageability of the work. Overall quality of the early childhood upbringing has been weakened. The possibilities for the near future were tested in the two day care centres chosen as an experi-ment objects. The analysis of these experiments showed that generative interaction work will benefit everyone: children, parents and employees. The main results of the research are new concepts of an early support day care centre, which can be empirically and theoretically possi-ble for development the near future. Key words: Day care facility’s co-operation practises, early childhood education as generational structure, child’s multi-operational and multi-layered community, multi-subjective operator, generative interaction work, communal composition.

Fast Accurate Transient Stability Simulations

The paper describes a Simultaneous Implicit (SI) approach for transient stability simulations based on an iterative technique using traingularised admittance matrix [1]. The reduced saliency of generator in the subtransient state is taken advantage of to speed up the algorithm. Accordingly, generator differential equations, except rotor swing, contain voltage proportional to fluxes in the main field, dampers and a hypothetical winding representing deep flowing eddy currents, as state variables. The simulation results are validated by comparison with two independent methods viz. Runge-Kutta simulation for a simplified system and a method based on modelling damper windings using conventional induction motor theory.

Analysis of flange joints with elastic bolt

The contact zone and pressure distribution between two elastic plates joined by an elastic bolt and nut are estimated using finite element analysis. Smooth interfacial conditions are assumed in all the regions of contact. Eight node axisymmetric ring elements are used to model the structure. The matrix solution is obtained through frontal technique and this solution technique is shown to be very efficient for the iterative scheme adopted to determine the extent of contact. A parametric study is conducted varying the elastic properties of bolt and plate materials, bolt head diameter and thickness of the plates. The method of approach presented in this paper provides a solution with a realistic idealization of tension flange joints.

Building personas of students accessing a peer-facilitated support for learning program

The modern student represents a change from the traditional learner. More than ever before, additional resources are available online and yet personalised learning and peer-assistance programs are becoming an essential part of tertiary education delivery. This paper presents the first stage in a user-centred design approach to the analysis of the completeness and efficacy of such a personalised, peer-based support for learning program. This approach used an iterative design methodology based on contextual interview, workshops and focus groups to develop personas representing students visiting the program. Initial uses of these developed personas have included training of new personnel as well as the evaluation of the program. Overall the use of this user-centred approach and iterative persona development methodology has yielded an invaluable resource for the design of support for learning programs across the higher education industry within Australia and beyond.

An interactive method for engaging the public health workforce with evidence

Introduction Systematic review authors are increasingly directing their attention to not only ensuring the robust processes and methods of their syntheses, but also to facilitating the use of their reviews by public health decision-makers and practitioners. This latter activity is known by several terms including knowledge translation, for which one definition is a ‘dynamic and iterative process that includes synthesis, exchange and ethically sound application of knowledge’.1 Unfortunately—and despite good intentions—the successful translation of knowledge has at times been inhibited by the failure of reviews to meet the needs of decision-makers, and the limitations of the traditional avenues by which reviews are disseminated.2 Encouraging the utilization of reviews by the public health workforce is a complex challenge. An unsupportive culture within the workforce, a lack of experience in assessing evidence, the use of traditional academic language in communication and the lack of actionable messages can all act as barriers to successful knowledge translation.3 Improving communication through developing strategies that include summaries, podcasts, webinars and translational tools which target key decision-makers such as HealthEvidence.org should be considered by authors as promising actions to support the uptake of reviews into practice.4,5 Earlier work has also suggested that to better meet the research evidence needs of public health professionals, authors should aim to produce syntheses that are actionable, relevant and timely.2 Further, review authors must interact more with those who will, or could use their reviews; particularly when determining the scope and questions to which a review will be directed.2 Unfortunately, individual engagement, ideal for examining complex issues and addressing particular concerns, is often difficult, particularly when attempting to reach large groups where for efficiency purposes, the strategy tends to be didactic, ‘lecturing’ and therefore less likely to change attitudes or encourage higher order thinking.6 …

Kinetics of Chemical Vapor Deposition

A generalized mass transport model is developed for predicting the rate ofdeposition in chemical vapor deposition (CVD) systems. This combines thegeneralized method of obtaining equilibrium composition, with elemental fluxbalance expressions. This procedure avoids the usual problems encountered incalculating the rates in multicomponent systems, like writing overall reactionschemes. The dependence of multicomponent diffusivities on the fluxes is accountedin this model using an iterative procedure. The model developed isapplied to the deposition of titanium carbide on cemented carbide tool bitsfrom a gas mixture of titanium tetrachloride, toluene, and hydrogen. Experimentaldeposition rates were obtained using a thermogravimetric assembly.Mass transport controlled rates give an order of magnitude estimates of theobserved rates.

Direct estimation of an element of order matrix from H-1 NMR spectra of strongly dipolar coupled spins

NMR spectra of molecules oriented in thermotropic liquid crystalline media provide information on the molecular structure and order. The spins are generally strongly dipolar coupled and the spectral analyse require the tedious and time consuming numerical iterative calculations. The present study demonstrates the application of multiple quantum spin state selective detection of single quantum transitions for mimicking the homonuclear decoupling and the direct estimation of an element of ordering matrix. This information is utilized to estimate the nearly accurate starting dipolar couplings for iterative calculations. The studies on the spectra of strongly dipolar coupled five and six interacting spin systems are reported.

Study of turbid media with light: Recovery of mechanical and optical properties from boundary measurement of intensity autocorrelation of light

We discuss the inverse problem associated with the propagation of the field autocorrelation of light through a highly scattering object like tissue. In the first part of the work, we reconstructed the optical absorption coefficient mu(u) and particle diffusion coefficient D-B from simulated measurements which are integrals of a quantity computed from the measured intensity and intensity autocorrelation g(2)(tau) at the boundary. In the second part we recover the mean square displacement (MSD) distribution of particles in an inhomogeneous object from the sampled g(2)(tau) measure on the boundary. From the MSD, we compute the storage and loss moduli distributions in the object. We have devised computationally easy methods to construct the sensitivity matrices which are used in the iterative reconstruction algorithms for recovering these parameters from the measurements. The results of the reconstruction of mu(a), D-B, MSD and the viscoelastic parameters, which are presented, show reasonable good position and quantitative accuracy.

Enhancement of Tunneling Density of States at a Junction of Three Luttinger Liquid Wires

We study the tunneling density of states (TDOS) for a junction of three Tomonaga-Luttinger liquid wires. We show that there are fixed points which allow for the enhancement of the TDOS, which is unusual for Luttinger liquids. The distance from the junction over which this enhancement occurs is of the order of x=v/(2 omega), where v is the plasmon velocity and omega is the bias frequency. Beyond this distance, the TDOS crosses over to the standard bulk value independent of the fixed point describing the junction. This finite range of distances opens up the possibility of experimentally probing the enhancement in each wire individually.

Inflammation and tissue destruction in arthritides and periodontal disease

The principal aim of this study was to examine diseases characterized by inflammatory injury, especially human arthritides and periodontitis, with specific interest to final effector enzymes of tissue destruction and address the possible future tools to prevent permanent tissue loss. We used biochemical and immunological methods applied to synovial tissue samples, samples of synovial fluid, and samples of peripheral blood. In Study IV, we used established clinical inflammatory injury indicator probing pocket depth and used it to derive a new clinical measure of systemic burden, periodontal inflammatory burden index. In study I, we showed a difference in the effector enzymes of peripheral blood leukocytes and leukocytes from inflamed synovial fluid of rheumatoid arthritis and reactive arthritis patients. The effector enzyme activities were higher in synovial fluid than in peripheral blood. In study II, we showed the presence of collagenase-3 in rheumatoid synovial tissue samples, relative resistance of the enzyme to inhibition in vitro and developed an electrophoretic method for detection of collagenase-3 in presence of collagenase-1. In study III, we carried out an open label study of doxycycline treatment of 12 RA patients. During the treatment period, we observed an improvement in several of the biochemical and psychosocial variables used to assess the status of the patients. In study IV, we showed a clearly lower level of periodontal inflammatory injury in chronic periodontitis patients referred for periodontal treatment. In this cross-sectional pilot study, we showed lower levels of inflammatory injury in periodontitis patients using statin than in those not receiving statin treatment. The difference was of same magnitude in patients using simvastatin or atorvastatin. The weighted index of inflammatory burden, PIBI, which emphasizes the burden imposed by the deepest pathological pockets on the system showed values consistent with a wider scale to ease future studies on the inflammatory burden associated with periodontitis.

Oral Health among Iranian Preadolescents : A School-Based Health Education Intervention

The present study assessed oral health and its determinants among Iranian preadolescents, and evaluated a school-based health education programme aimed to promote their oral health. The target population of this study comprised a random sample of the third-grade school children (n = 459) of all public primary schools in 19 areas of Tehran city. The data came from a clinical examination of the children and two self-administered questionnaires: one for children, and one for mothers. The clinical dental examination was performed for recording children's oral health. The mothers' questionnaires covered background factors, oral self-care (OSC) behaviours and oral health-related knowledge and attitude statements. After baseline data collection, a community trial was designed as a 3-month school-based intervention study. For the intervention trial, the third-grade classes as the clusters were randomly assigned to the intervention and control groups. Three kinds of intervention were implemented, one in class, one via the parents, and one as a combination of these. One group served as controls with no intervention. The outcome measures of the study were changes in plaque and bleeding scores recorded. The results showed that mean dmft was 3.75 (SD = 2.8) for the primary teeth and mean DMFT was 0.4 (SD = 0.9) for the permanent teeth. All children had plaque on at least one index tooth and bleeding on probing in at least one index tooth occurred in 81%. About one-third (34%) of the children reported favourable OSC and less than half (46%) of the children reported brushing their teeth at least twice daily. Girls reported favourable OSC (OR = 2.0), had decay-free teeth (OR = 1.8) and treated permanent teeth (OR = 3.3) more than did boys. Mother's oral health-related aspects, i.e., mother's favourable OSC, high knowledge levels of and positive attitudes towards oral health, and active supervision of the child's tooth brushing had a positive effect on all aspects of children's oral health status and behaviours (ORs from 1.3 to 1.9). After the intervention, the results showed a strong intervention effect on healthy gingiva in both groups where parents were involved: the parental-aid group (OR = 7.7, 95% CI 2.2-27.7) and combined group (OR = 6.6, 95% CI 2.0-22.1). To improve children's oral health, community school-based oral health educational programmes should be established to include all primary schools. These programmes should benefit from the common risk factor approach and a multi-sectored approach to employ for communication between the community, the school, and the family. Oral health interventions should empower the parents' ability to improve their own oral health behaviour and then to transfer that healthy behaviour to their children.