Fluvio-morphological processes of meander bends - Combining conventional field measurements, close-range remote sensing and computational modelling

Meandering rivers have been perceived to evolve rather similarly around the world independently of the location or size of the river. Despite the many consistent processes and characteristics they have also been noted to show complex and unique sets of fluviomorphological processes in which local factors play important role. These complex interactions of flow and morphology affect notably the development of the river. Comprehensive and fundamental field, flume and theoretically based studies of fluviomorphological processes in meandering rivers have been carried out especially during the latter part of the 20th century. However, as these studies have been carried out with traditional field measurements techniques their spatial and temporal resolution is not competitive to the level achievable today. The hypothesis of this study is that, by exploiting e increased spatial and temporal resolution of the data, achieved by combining conventional field measurements with a range of modern technologies, will provide new insights to the spatial patterns of the flow-sediment interaction in meandering streams, which have perceived to show notable variation in space and time. This thesis shows how the modern technologies can be combined to derive very high spatial and temporal resolution data on fluvio-morphological processes over meander bends. The flow structure over the bends is recorded in situ using acoustic Doppler current profiler (ADCP) and the spatial and temporal resolution of the flow data is enhanced using 2D and 3D CFD over various meander bends. The CFD are also exploited to simulate sediment transport. Multi-temporal terrestrial laser scanning (TLS), mobile laser scanning (MLS) and echo sounding data are used to measure the flow-based changes and formations over meander bends and to build the computational models. The spatial patterns of erosion and deposition over meander bends are analysed relative to the measured and modelled flow field and sediment transport. The results are compared with the classic theories of the processes in meander bends. Mainly, the results of this study follow well the existing theories and results of previous studies. However, some new insights regarding to the spatial and temporal patterns of the flow-sediment interaction in a natural sand-bed meander bend are provided. The results of this study show the advantages of the rapid and detailed measurements techniques and the achieved spatial and temporal resolution provided by CFD, unachievable with field measurements. The thesis also discusses the limitations which remain in the measurement and modelling methods and in understanding of fluvial geomorphology of meander bends. Further, the hydro- and morphodynamic models’ sensitivity to user-defined parameters is tested, and the modelling results are assessed against detailed field measurement. The study is implemented in the meandering sub-Arctic Pulmanki River in Finland. The river is unregulated and sand-bed and major morphological changes occur annually on the meander point bars, which are inundated only during the snow-melt-induced spring floods. The outcome of this study applies to sandbed meandering rivers in regions where normally one significant flood event occurs annually, such as Arctic areas with snow-melt induced spring floods, and where the point bars of the meander bends are inundated only during the flood events.

Regime-Switching in the Impact of Oil Price Shocks on Stock Market Volatility: Evidence from Oil-Importing and Oil-Exporting Countries

Research has highlighted the adequacy of Markov regime-switching model to address dynamic behavior in long term stock market movements. Employing a purposed Extended regime-switching GARCH(1,1) model, this thesis further investigates the regime dependent nonlinear relationship between changes in oil price and stock market volatility in Saudi Arabia, Norway and Singapore for the period of 2001-2014. Market selection is prioritized to national dependency on oil export or import, which also rationalizes the fitness of implied bivariate volatility model. Among two regimes identified by the mean model, high stock market return-low volatility regime reflects the stable economic growth periods. The other regime characterized by low stock market return-high volatility coincides with episodes of recession and downturn. Moreover, results of volatility model provide the evidence that shocks in stock markets are less persistent during the high volatility regime. While accelerated oil price rises the stock market volatility during recessions, it reduces the stock market risk during normal growth periods in Singapore. In contrast, oil price showed no significant notable impact on stock market volatility of target oil-exporting countries in either of the volatility regime. In light to these results, international investors and policy makers could benefit the risk management in relation to oil price fluctuation.

4D-aikataulutuksen mahdollisuudet voimalaitosprojekteissa

4D-aikataulutus yhdistää aikataulun ja 3D-mallin animaatioelokuvaksi, jossa projektin rakentuminen esitetään ajan funktiona. Tässä työssä on perehdytty 4D-aikataulutukseen voimalaitosprojektien kannalta. Lisäksi työssä on perehdytty projektijohtamiseen, ja sitä kautta aikataulun merkitykseen projekteille. Työn lopuksi on esitetty 4D-aikataulutuksen käyttöönottoa ja siinä huomioon otettavia seikkoja. 4D-aikataulutuksen avulla projektin asennussuunnittelua voidaan toteutusvaiheessa tehostaa, sillä 4D-aikataulutuksen avulla asennusten törmäysten tarkastelua voidaan tehdä hyvissä ajoin suunnitteluvaiheessa. Lisäksi vaihtoehtoisten asennusmallien tekeminen on mahdollista, ja niitä voidaan keskenäään vertailla. Projektit voivat 4D-aikataulutuksen avulla analysoida myös aikatauluviiveitä, sekä esittää vaihtoehtoisia toteutustapoja projektille. 4D-aikataulutus mahdollistaa myös projektivaiheiden jälkeisen käytön. Projektin jälkeen projektin suunnitteltua ja toteutunutta aikataulua voidaan analysoida keskenään ja siten saada toisiin projekteihin vertailukelpoista tietoa. Lisäksi seisokkitöiden suunnittelussa on 4D-aikataulun avulla mahdollista suunnitella töiden järjestäminen tehokkaasti sekä ottaa myös turvallisuusnäkökohdat huomioon.

Molecular and cellular pathogenesis of autosomal recessive polycystic kidney disease

Autosomal recessive polycystic kidney disease (ARPKD) is an inherited disease characterized by a malformation complex which includes cystically dilated tubules in the kidneys and ductal plate malformation in the liver. The disorder is observed primarily in infancy and childhood, being responsible for significant pediatric morbidity and mortality. All typical forms of ARPKD are caused by mutations in a single gene, PKHD1 (polycystic kidney and hepatic disease 1). This gene has a minimum of 86 exons, assembled into multiple differentially spliced transcripts and has its highest level of expression in kidney, pancreas and liver. Mutational analyses revealed that all patients with both mutations associated with truncation of the longest open reading frame-encoded protein displayed the severe phenotype. This product, polyductin, is a 4,074-amino acid protein expressed in the cytoplasm, plasma membrane and primary apical cilia, a structure that has been implicated in the pathogenesis of different polycystic kidney diseases. In fact, cholangiocytes isolated from an ARPKD rat model develop shorter and dysmorphic cilia, suggesting polyductin to be important for normal ciliary morphology. Polyductin seems also to participate in tubule morphogenesis and cell mitotic orientation along the tubular axis. The recent advances in the understanding of in vitro and animal models of polycystic kidney diseases have shed light on the molecular and cellular mechanisms of cyst formation and progression, allowing the initiation of therapeutic strategy designing and promising perspectives for ARPKD patients. It is notable that vasopressin V2 receptor antagonists can inhibit/halt the renal cystic disease progression in an orthologous rat model of human ARPKD.

Deinking sludge utilization possibilities: technical, economic, and environmental assessments

This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.

High mobility group box 1 as a mediator of endotoxin administration after hemorrhagic shock-primed lung injury

High mobility group box 1 (HMGB1) was discovered as a novel late-acting cytokine that contributes to acute lung injury (ALI). However, the contribution of HMGB1 to two-hit-induced ALI has not been investigated. To examine the participation of HMGB1 in the pathogenesis of ALI caused by the two-hit hypothesis, endotoxin was injected intratracheally in a hemorrhagic shock-primed ALI mouse model. Concentrations of HMGB1 in the lung of the shock group were markedly increased at 16 h (1.63 ± 0.05, compared to the control group: 1.02 ± 0.03; P < 0.05), with the highest concentration being observed at 24 h. In the sham/lipopolysaccharide group, lung HMGB1 concentrations were found to be markedly increased at 24 h (1.98 ± 0.08, compared to the control group: 1.07 ± 0.03; P < 0.05). Administration of lipopolysaccharide to the hemorrhagic shock group resulted in a notable HMGB1 increase by 4 h, with a further increase by 16 h. Intratracheal lipopolysaccharide injection after hemorrhagic shock resulted in the highest lung leak at 16 h (2.68 ± 0.08, compared to the control group: 1.05 ± 0.04; P < 0.05). Compared to the hemorrhagic shock/lipopolysaccharide mice, blockade of HMGB1 at the same time as lipopolysaccharide injection prevented significantly pulmonary tumor necrosis factor-alpha, interleukin-1beta and myeloperoxidase. Lung leak was also markedly reduced at 16 h; blockade of HMGB1 24 h after lipopolysaccharide injection failed to alter lung leak or myeloperoxidase at 48 h. Our observations suggest that HMGB1 plays a key role as a late mediator when lipopolysaccharide is injected after hemorrhagic shock-primed ALI and the kinetics of its release differs from that of one-hit ALI. The therapeutic window to suppress HMGB1 activity should not be delayed to 24 h after the disease onset.

Thoughts on work-in-progress crowdsourcing metrics of digital collections

The presentation consists of work-in-progress metrics of #digitalkoot, the crowdsourcing project launched by National Library of Finland

Defining Sales and Operations Planning Process in an Environmental Management Company

Sales and operations research publications have increased significantly in the last decades. The concept of sales and operations planning (S&OP) has gained increased recognition and has been put forward as the area within Supply Chain Management (SCM). Development of S&OP is based on the need for determining future actions, both for sales and operations, since off-shoring, outsourcing, complex supply chains and extended lead times make challenges for responding to changes in the marketplace when they occur. Order intake of the case company has grown rapidly during the last years. Along with the growth, new challenges considering data management and information flow have arisen due to increasing customer orders. To manage these challenges, case company has implemented S&OP process, though initial process is in early stage and due to this, the process is not managing the increased customer orders adequately. Thesis objective is to explore extensively the S&OP process content of the case company and give further recommendations. Objectives are categorized into six different groups, to clarify the purpose of this thesis. Qualitative research methods used are active participant observation, qualitative interviews, enquiry, education, and a workshop. It is notable that demand planning was felt as cumbersome, so it is typically the biggest challenge in S&OP process. More proactive the sales forecasting can be, more expanded the time horizon of operational planning will turn out. S&OP process is 60 percent change management, 30 percent process development and 10 percent technology. The change management and continuous improvement can sometimes be arduous and set as secondary. It is important that different people are required to improve the process and the process is constantly evaluated. As well as, process governance is substantially in a central role and it has to be managed consciously. Generally, S&OP process was seen important and all the stakeholders were committed to the process. Particular sections were experienced more important than others, depending on the stakeholders’ point of views. Recommendations to objective groups are evaluated by the achievable benefit and resource requirement. The urgent and easily implemented improvement recommendations should be executed firstly. Next steps are to develop more coherent process structure and refine cost awareness. Afterwards demand planning, supply planning, and reporting should be developed more profoundly. For last, information technology system should be implemented to support the process phases.

Exploring business models for medical games: Key components and challenges

The costs of health care are going up in many countries. In order to provide affordable and effective health care solutions, new technologies and approaches are constantly being developed. In this research, video games are presented as a possible solution to the problem. Video games are fun, and nowadays most people like to spend time on them. In addition, recent studies have pointed out that video games can have notable health benefits. Health games have already been developed, used in practice, and researched. However, the bulk of health game studies have been concerned with the design or the effectiveness of the games; no actual business studies have been conducted on the subject, even though health games often lack commercial success despite their health benefits. This thesis seeks to fill this gap. The specific aim of this thesis is to develop a conceptual business model framework and empirically use it in explorative medical game business model research. In the first stage of this research, a literature review was conducted and the existing literature analyzed and synthesized into a conceptual business model framework consisting of six dimensions. The motivation behind the synthesis is the ongoing ambiguity around the business model concept. In the second stage, 22 semi-structured interviews were conducted with different professionals within the value network for medical games. The business model framework was present in all stages of the empirical research: First, in the data collection stage, the framework acted as a guiding instrument, focusing the interview process. Then, the interviews were coded and analyzed using the framework as a structure. The results were then reported following the structure of the framework. In the results, the interviewees highlighted several important considerations and issues for medical games concerning the six dimensions of the business model framework. Based on the key findings of this research, several key components of business models for medical games were identified and illustrated in a single figure. Furthermore, five notable challenges for business models for medical games were presented, and possible solutions for the challenges were postulated. Theoretically, these findings provide pioneering information on the untouched subject of business models for medical games. Moreover, the conceptual business model framework and its use in the novel context of medical games provide a contribution to the business model literature. Regarding practice, this thesis further accentuates that medical games can offer notable benefits to several stakeholder groups and offers advice to companies seeking to commercialize these games.

Effects of filtration methods on the neutralization yield of crude marine fish oil

The evaluation of filtration methods on the yield and oleochemicals characteristics on the crude fish oil from the soapstock of marine fish for purposes of nutrition has been conducted in this work. The analytical properties of the crude and the neutralized oil with three excesses of sodium hydroxide (NaOH, 20%, 40% and 60%) were carried out on two different ways with organza and the “glass wool”. The neutralization of the oil brought about a notable improvement in the analytical properties of the oil. Thus, it leads to a high quality fish oil in terms of taste, colour, odours, shelf life and market value. Based on the improved characteristics of the oil, it could be suitable for applications in pharmaceutical and food industries.

Yrittäjän poistuminen – yrittäjän yritystoiminnasta poistumisen suunnittelu

Tämän tutkimuksen tavoitteena oli laadullisia menetelmiä käyttäen lisätä ymmärrystä yrittäjän poistumisen ilmiöstä. Yrittäjän näkökulmasta tutkimuksessa tarkastellaan poistumiseen suhtautumista ja sen suunnitteluun ja toteutukseen vaikuttavia yrittäjän sisäisiä ja ulkoisia tekijöitä. Tutkimuksen aineisto kerättiin Lahden lähialueen yrittäjiltä käyttäen teemahaastattelun menetelmää. Aineiston analyysin menetelmänä oli teemoittelu. Psykologista omistajuutta sovellettiin tutkimuksen viitekehyksenä. Tutkimuksen tuloksena havaittiin yrittäjien suunnittelevan poistumistaan kahdessa vaiheessa, poistuen ensin yrittäjän roolista ja vasta määräämättömän ajan jälkeen kokonaan yrityksen toiminnasta ja sen tukijan roolista. Toimintatapa helpottaa yrittäjän psykologisesta omistajuudesta ja identiteetin muutoksesta johtuvaa luopumisen vaikeutta. Ulkoisista poistumiseen vaikuttavista tekijöistä tutkimuksessa nostetaan esille perheyritysten perintöveroon liitetyt ennakkokäsitykset, jotka voivat vaikuttaa poistumisen lykkäämiseen. Psykologisen omistajuuden käsite ja tutkimuksessa havaittu poistumiseen liitetty tabu selittävät osittain yrityksen ostajan löytämisen vaikeutta ja lopettavien yrittäjien määrää Suomessa. Tutkimuksen tulokset ovat merkittäviä yrittäjyyttä ja omistajanvaihdoksia edistävien toimijoiden kannalta.

Cleavages in contemporary Finland : a study on party-voter ties

Cleavages have been central in understanding the relationship between political parties and voters but the credibility of cleavage approach has been increasingly debated. This is because of decreasing party loyalty, fewer ideological differences between the parties and general social structural change amongst other factors. By definition, cleavages arise when social structural groups recognize their clashing interests, which are reflected in common values and attitudes, and vote for parties that are dedicated to defend the interests of the groups concerned. This study assesses relevance of cleavage approach in the Finnish context. The research problem in this study is “what kind of a cleavage structure exists in Finland at the beginning of the 21st century? Finland represents a case that has traditionally been characterized by a strong and diverse cleavage structure, notable ideological fragmentation in the electorate and an ideologically diverse party system. Nevertheless, the picture of the party-voter ties in Finland still remains incomplete with regard to a thorough analysis of cleavages. In addition, despite the vast amount of literature on cleavages in political science, studies that thoroughly analyze national cleavage structures by assessing the relationship between social structural position, values and attitudes and party choice have been rare. The research questions are approached by deploying statistical analyses, and using Finnish National Election Studies from 2003, 2007 and 2011as data. In this study, seven different social structural cleavage bases are analyzed: native language, type of residential area, occupational class, education, denomination, gender and age cohorts. Four different value/attitudinal dimensions were identified in this study: economic right and authority, regional and socioeconomic equality, sociocultural and European Union dimensions. This study shows that despite the weak overall effect of social structural positions on values and attitudes, a few rather strong connections between them were identified. The overall impact of social structural position and values and attitudes on party choice varies significantly between parties. Cleavages still exist in Finland and the cleavage structure partly reflects the old basis in the Finnish party system. The cleavage that is based on the type of residential area and reflected in regional and socioeconomic equality dimensions concerns primarily the voters of the Centre Party and the Coalition Party. The linguistic cleavage concerns mostly the voters of the Swedish People’s Party. The classic class cleavage reflected in the regional and socioeconomic equality dimension concerns in turn first and foremost the blue-collar voters of the Left Alliance and the Social Democratic Party, the agricultural entrepreneur voters of the Centre Party and higher professional and manager voters of the Coalition Party. The conflict with the most potential as a cleavage is the one based on social status (occupational class and education) and it is reflected in sociocultural and EU dimensions. It sets the voters of the True Finns against the voters of the Green League and the Coalition Party. The study underlines the challenges the old parties have met after the volatile election in 2011, which shook the cleavage structure. It also describes the complexity involved in the Finnish conflict structure and the multidimensionality in the electoral competition between the parties.

Pertussis: infection, vaccination and gene polymorphisms

Pertussis or whooping cough is a human respiratory tract infection and a vaccine-preventable disease that is caused by Bordetella pertussis bacteria. Pertussis vaccination has been part of the Finnish national vaccine program since 1952. Despite extensive vaccinations, the incidence of pertussis has increased in many countries during the last decades. Large epidemics have been observed also in countries with high vaccine coverage. Inter-individual variation in immune responses is always encountered after vaccination. Low vaccine responses may cause vulnerability to pertussis even straight after vaccination. Reasons for low responses are not fully understood. The innate immune system is responsible for the initial recognition of pathogens and vaccine antigens. The role of innate immunity on pertussis immunity has not been thoroughly investigated. Mannose-binding lectin (MBL) and toll-like receptor 4 (TLR4) are important molecules of the innate immune system and in the recognition of pathogens. Cytokines form a signaling network that have a notable role in immune responses after infections as well as after vaccinations. Single nucleotide polymorphism (SNP) is common in genes encoding these molecules and the polymorphisms have been reported to affect vaccine response after viral and bacterial vaccines. This study investigated the gene polymorphisms of MBL2, TLR4 and interleukin (IL)-10 promoter and their association with vaccine responses after acellular pertussis (aP) vaccination in Finnish adolescents and infants. Cell-mediated immune responses were investigated ten years after the previous pertussis vaccinations in young adults. In addition, the role of MBL deficiency in pertussis infection susceptibility was evaluated. The results of this study show that subjects with TLR4 polymorphism had lower antibody production and persistence after aP vaccination compared with normal allele. A specific SNP in the TLR4 gene was associated with decreased antibody responses and persistence in adolescents after aP booster vaccination. Cell-mediated immune responses were partly detected ten years after the previous vaccination; booster vaccine clearly enhanced the responses. In addition, subjects with IL-10 polymorphism had altered cell-mediated immune responses. MBL deficiency was found to be more frequent in pertussis patients than healthy controls but the polymorphism of MBL2 was not associated with antibody responses after acellular pertussis vaccination. The novel finding of this study was that genetic variation in the innate immune system seems to play a role in altered pertussis vaccine responses as well as in pertussis infection. These new findings enlighten the mechanisms behind the low responses after pertussis vaccination and help to predict risk factors related to this phenomenon.

Item-level life-cycle model for maintenance network – from cost to additional value

The importance of industrial maintenance has been emphasized during the last decades; it is no longer a mere cost item, but one of the mainstays of business. Market conditions have worsened lately, investments in production assets have decreased, and at the same time competition has changed from taking place between companies to competition between networks. Companies have focused on their core functions and outsourced support services, like maintenance, above all to decrease costs. This new phenomenon has led to increasing formation of business networks. As a result, a growing need for new kinds of tools for managing these networks effectively has arisen. Maintenance costs are usually a notable part of the life-cycle costs of an item, and it is important to be able to plan the future maintenance operations for the strategic period of the company or for the whole life-cycle period of the item. This thesis introduces an itemlevel life-cycle model (LCM) for industrial maintenance networks. The term item is used as a common definition for a part, a component, a piece of equipment etc. The constructed LCM is a working tool for a maintenance network (consisting of customer companies that buy maintenance services and various supplier companies). Each network member is able to input their own cost and profit data related to the maintenance services of one item. As a result, the model calculates the net present values of maintenance costs and profits and presents them from the points of view of all the network members. The thesis indicates that previous LCMs for calculating maintenance costs have often been very case-specific, suitable only for the item in question, and they have also been constructed for the needs of a single company, without the network perspective. The developed LCM is a proper tool for the decision making of maintenance services in the network environment; it enables analysing the past and making scenarios for the future, and offers choices between alternative maintenance operations. The LCM is also suitable for small companies in building active networks to offer outsourcing services for large companies. The research introduces also a five-step constructing process for designing a life-cycle costing model in the network environment. This five-step designing process defines model components and structure throughout the iteration and exploitation of user feedback. The same method can be followed to develop other models. The thesis contributes to the literature of value and value elements of maintenance services. It examines the value of maintenance services from the perspective of different maintenance network members and presents established value element lists for the customer and the service provider. These value element lists enable making value visible in the maintenance operations of a networked business. The LCM added with value thinking promotes the notion of maintenance from a “cost maker” towards a “value creator”.

Development of Project Logistics in Engineering, Procurement and Construction Projects

The aim of this Master’s Thesis is to develop project logistics functions in large scale en-gineering, procurement and construction projects. The background of the research topic is compounded from two separate subjects; OPAL Program and case study of an actual EPC project. The purpose is to examine Project Logistics process in accordance with OPAL Program as well as logistics process in focus EPC project. Both entities are researched by using the case study research methodology. Logistics process of the focus EPC project is described as well as presented and in addi-tion, logistics related findings and observations are introduced. Significant findings and observations are found from logistics costs as well as shipment volume estimations in the early phase of the focus ECP project. A notable finding is also that because goods were transported as readily assembled as possible it caused expensive oversized cargo deliveries. From findings and observation of the focus EPC project it can be derived that logistics has to be involved in the early sales phase in order to receive more accurate logistics cost esti-mations for project deliveries. It is also noticed that in order to obtain savings in logistics costs, oversized deliveries must be avoided.