The Precipitationshed : Concepts, Methods, and Applications

Human societies are reliant on the functioning of the hydrologic cycle. The atmospheric branch of this cycle, often referred to as moisture recycling in the context of land-to-land exchange, refers to water evaporating, traveling through the atmosphere, and falling out as precipitation. Similar to the surface water cycle that uses the watershed as the unit of analysis, it is also possible to consider a ‘watershed of the sky’ for the atmospheric water cycle. Thus, I explore the precipitationshed - defined as the upwind surface of the Earth that provides evaporation that later falls as precipitation in a specific place. The primary contributions of this dissertation are to (a) introduce the precipitationshed concept, (b) provide a quantitative basis for the study of the precipitationshed, and (c) demonstrate its use in the fields of hydrometeorology, land-use change, social-ecological systems, ecosystem services, and environmental governance. In Paper I, the concept of the precipitationshed is introduced and explored for the first time. The quantification of precipitationshed variability is described in Paper II, and the key finding is that the precipitationsheds for multiple regions are persistent in time and space. Moisture recycling is further described as an ecosystem service in Paper III, to integrate the concept into the existing language of environmental sustainability and management. That is, I identify regions where vegetation more strongly regulates the provision of atmospheric water, as well as the regions that more strongly benefit from this regulation. In Paper IV, the precipitationshed is further explored through the lens of urban reliance on moisture recycling. Using a novel method, I quantify the vulnerability of urban areas to social-ecological changes within their precipitationsheds. In Paper V, I argue that successful moisture recycling governance will require flexible, transboundary institutions that are capable of operating within complex social-ecological systems. I conclude that, in the future, the precipitationshed can be a key tool in addressing the complexity of social-ecological systems. 

Dietary exposure assessments for children in Europe (the EXPOCHI project): rationale, methods and design

[EN]The number of dietary exposure assessment studies focussing on children is very limited. Children are however a vulnerable group due to their higher food consumption level per kg body weight. Therefore, the EXPOCHI project aims [1] to create a relational network of individual food consumption databases in children, covering different geographical areas within Europe, and [2] to use these data to assess the usual intake of lead, chromium, selenium and food colours.

Design, modelling, simulation and integration of cyber physical systems: methods and applications

The main drivers for the development and evolution of Cyber Physical Systems (CPS) are the reduction of development costs and time along with the enhancement of the designed products. The aim of this survey paper is to provide an overview of different types of system and the associated transition process from mechatronics to CPS and cloud-based (IoT) systems. It will further consider the requirement that methodologies for CPS-design should be part of a multi-disciplinary development process within which designers should focus not only on the separate physical and computational components, but also on their integration and interaction. Challenges related to CPS-design are therefore considered in the paper from the perspectives of the physical processes, computation and integration respectively. Illustrative case studies are selected from different system levels starting with the description of the overlaying concept of Cyber Physical Production Systems (CPPSs). The analysis and evaluation of the specific properties of a sub-system using a condition monitoring system, important for the maintenance purposes, is then given for a wind turbine.

Comprehensive economic and financial analysis of the enterprise activity: approaches, methods and implementation

This thesis intends to analyse the performance and the efficiency of companies and to identify the key factors that may explain it. A comprehensive analysis based on a set of economic and financial ratios was studied as an instrument which provides information on enterprise performance and its efficiency. It was selected a sample with 15 enterprises: 7 Portuguese and 8 Ukrainian ones, belonging to several industries. Financial and non-financial data was collected for 6 years, during the period of 2009 to 2014. Research questions that guided this work were: Are the enterprises efficient/profitable? What factors influence enterprises’ efficiency/performance? Is there any difference between Ukrainian and Portuguese enterprises’ efficiency/performance, which factors have more influence? Which industrial sector is represented by more efficient/profitable enterprises? The main results showed that in average enterprises were efficient; comparing by states Ukrainian enterprises are more efficient; industries have similar level of efficiency. Among factors that influence ATR positively are fixed and current assets turnover ratios, ROA; negatively influencing are EBITDA margin and liquidity ratio. There is no significant difference between models by country. Concerning profitability, enterprises have low performance level but in comparison of countries Ukrainian enterprises have better profitability in average. Regarding the industry sector, paper industry is the most profitable. Among factors influencing ROA are profit margin, fixed asset turnover ratio, EBITDA margin, Debt to equity ratio and the country. In case of profitability both countries have different models. For Ukrainian enterprises is suggested to pay attention on factors of Short-term debt to total debt, ROA, Interest coverage ratio in order to be more efficient; Profit margin and EBITDA margin to make their performance better. For Portuguese enterprises for improving efficiency the observation and improvement of fixed assets turnover ratio, current assets turnover ratio, Short-term financial debt to total debt, Leverage Ratio, EBITDA margin is suggested; for improving higher profitability track fixed assets turnover ratio, current assets turnover ratio, Debt to equity ratio, Profit margin and Interest coverage ratio is suggested.

The acquisition of adjunct control: grammar and processing

This dissertation uses children’s acquisition of adjunct control as a case study to investigate grammatical and performance accounts of language acquisition. In previous research, children have consistently exhibited non-adultlike behavior for sentences with adjunct control. To explain children’s behavior, several different grammatical accounts have been proposed, but evidence for these accounts has been inconclusive. In this dissertation, I take two approaches to account for children’s errors. First, I spell out the predictions of previous grammatical accounts, and test these predictions after accounting for some methodological concerns that might have influenced children’s behavior in previous studies. While I reproduce the non-adultlike behavior observed in previous studies, the predictions of previous grammatical accounts are not borne out, suggesting that extragrammatical factors are needed to explain children’s behavior. Next, I consider the role of two different types of extragrammatical factors in predicting children’s non-adultlike behavior. With a new task designed to address the task demands in previous studies, children exhibit significantly higher accuracy than with previous tasks. This suggests that children’s behavior has been influenced by task- specific processing factors. In addition to the task, I also test the predictions of a similarity-based interference account, which links children’s errors to the same memory mechanisms involved in sentence processing difficulties observed in adults. These predictions are borne out, supporting a more continuous developmental trajectory as children’s processing mechanisms become more resistant to interference. Finally, I consider how children’s errors might influence their acquisition of adjunct control, given the distribution in the linguistic input. I discuss the results of a corpus analysis, including the possibility that adjunct control could be learned from the input. The kinds of information that could be useful to a learner become much more limited, however, after considering the processing limitations that would interfere with the representations available to the learner.

Trabalhar com a matemática em educação de infância

Este estudo tem como principal objetivo compreender e analisar o modo como crianças de creche e jardim-de-infância resolvem problemas matemáticos e o que pode constranger a resolução. Em particular, procurei analisar a atividade matemática que as crianças desenvolvem quando se confrontam com problemas matemáticos e os desafios com que se deparam. Do ponto de vista metodológico, o estudo enquadra-se numa abordagem qualitativa de investigação e num paradigma interpretativo. Além disso, trata-se de uma investigação-ação orientada pela questão “como otimizar a atividade de resolver problemas matemáticos em contextos de educação de infância?”. Neste âmbito, propus a quatro crianças de creche e a 21 de jardim-de-infância um conjunto de tarefas selecionadas para, potencialmente, terem, para si, algum grau de desafio. Os principais métodos de recolha de dados foram a observação participante, a análise documental e um inquérito por questionário realizado às educadoras cooperantes. O estudo ilustra que é possível envolver crianças de creche e de jardim-de-infância numa atividade de resolução de problemas matemáticos e que esta atividade é favorecida se o contexto dos problemas estiver próximo do que fazem no dia-a-dia da sala. Durante o processo de resolução das tarefas propostas, foram mobilizadas e trabalhadas diversas noções matemáticas. Na creche, todas as crianças evidenciaram possuir conhecimentos acerca da noção topológica “dentro de” e “fora de” e algumas foram bem-sucedidas no uso do processo de classificação, tendo em conta um critério. Neste âmbito, recorreram a representações ativas. No jardim-de-infância, todas as crianças conseguiram fazer a contagem sincronizada das letras do seu nome, de indicar a quantidade de letras, o que indicia o conhecimento da noção de cardinal, e de representar esta quantidade recorrendo tanto a numerais como a representações icónicas. Além disso, foram capazes de interpretar uma tabela de modo a construir um gráfico com barras e de elaborar um pictograma, o que revela possuírem conhecimentos ao nível da literacia estatística. Por último, algumas crianças foram bem-sucedidas na descoberta de estratégias de resolução de problemas que lhes permitiram inventariar exaustivamente todas as possibilidades de resolução e contar, organizadamente, estas possibilidades. No decurso desta atividade surgiram tentativas de generalização, embora nem sempre corretas, sobressaindo o recurso a representações ativas nomeadamente à dramatização de situações. Quanto aos desafios com que se depararam destacam-se, no caso da creche, o uso correto do processo de classificação. No caso do jardim-de-infância, as crianças demonstraram dificuldades em distinguir a legenda do pictograma dos dados, em resolver um problema em que estava em jogo o sentido combinatório da multiplicação e em encontrar estratégias de generalização. O estudo indicia, ainda, que é essencial que o educador proponha tarefas diversificadas e desafiantes que, partindo sempre da curiosidade e interesse das crianças, lhes permitam trabalhar com ideias matemáticas importantes e representar adequadamente o conhecimento com que lidam.

EGCL: an extended G-Code Language with flow control, functions and mnemonic variables

In the context of computer numerical control (CNC) and computer aided manufacturing (CAM), the capabilities of programming languages such as symbolic and intuitive programming, program portability and geometrical portfolio have special importance -- They allow to save time and to avoid errors during part programming and permit code re-usage -- Our updated literature review indicates that the current state of art presents voids in parametric programming, program portability and programming flexibility -- In response to this situation, this article presents a compiler implementation for EGCL (Extended G-code Language), a new, enriched CNC programming language which allows the use of descriptive variable names, geometrical functions and flow-control statements (if-then-else, while) -- Our compiler produces low-level generic, elementary ISO-compliant Gcode, thus allowing for flexibility in the choice of the executing CNC machine and in portability -- Our results show that readable variable names and flow control statements allow a simplified and intuitive part programming and permit re-usage of the programs -- Future work includes allowing the programmer to define own functions in terms of EGCL, in contrast to the current status of having them as library built-in functions

Physical activity assessment in the general population; instrumental methods and new technologies.

La medición objetiva del movimiento humano y la cuantificación del gasto energético debido a la actividad física es una necesidad identificada tanto en investigación como en clínica. Los métodos de referencia validados y bien definidos (el agua doblemente marcada, la calorimetría directa, la calorimetría indirecta) son caros y prácticamente se limitan a la investigación en el laboratorio. Por lo tanto, en los últimos años, se han desarrollado diferentes dispositivos de medición objetiva que son apropiados para los estudios de campo y clínicos. No hay ningún estándar de oro entre ellos, ya que todos tienen limitaciones. Los podómetros son ligeros, poco costosos, cuentan los pasos y aportan información sobre la actividad física total, pero no sobre el comportamiento y los patrones de actividad física. Los acelerómetros son caros, aportan información sobre patrón, frecuencia e intensidad de la actividad física, pero no sobre el tipo de actividad física. Los podómetros y acelerómetros únicamente recogen información sobre el movimiento del movimiento corporal, pero la validez en la estimación del gasto energético es limitada. La monitorización de la frecuencia cardíaca relaciona intensidad del ejercicio con gasto de energía, pero no aporta información sobre la actividad física. Los dispositivos GPS son portátiles, relativamente asequibles, no invasivos y recogen distancia, velocidad y elevación con hora y lugar exactos, pero quizás estén limitados para la evaluación de movimientos cortos de alta intensidad y elevado gasto energético. Los dispositivos de última generación combinan acelerometría con la medición de variables fisiológicas, comparten las ventajas de los dispositivos individuales y son más precisos. Para el cálculo del gasto energético se aplican algoritmos específicos de la actividad incluidos en el software del fabricante que pueden afectar a los resultados. La mayoría de los dispositivos estiman con mayor precisión el gasto energético a intensidades ligeras y moderadas, pero subestiman el gasto a intensidades muy ligeras y de mayor intensidad.

Pseudospectral methods and numerical continuation for the analysis os structured population models.

191 p.

Technology, mining methods and landscapes of a placer mining district in Fairbanks, Alaska, 1900-1930

Placer miners in Alaska’s interior were part of the last great gold rush in North America. As word of gold in the Fairbanks Mining District traveled down the Yukon River, a wave of miners from the Klondike placer fields in Dawson, along with a assortment of speculators and inexperienced green horns from the Lower 48 converged on the confluence of the Tanana and Chena rivers hoping to strike it rich. The steamers coming from Dawson were integral; they carried miners with experience working the frozen subarctic placer deposits of the Klondike. These miners encountered new environmental challenges that required the development of new technologies and mining methods to efficiently harvest gold. These methods and machines were brought into Fairbanks and further perfected to account for the local conditions. This thesis describes the local mining technologies and methods employed in the Fairbanks district and the landscape patterns created during the placer mining boom years of 1903-1909, decline years of 1910-1923 and recovery of 1923-1930.

Feasibility study and flow scheduling optimization of a multi-product pipeline system

The first goal of this study is to analyse a real-world multiproduct onshore pipeline system in order to verify its hydraulic configuration and operational feasibility by constructing a simulation model step by step from its elementary building blocks that permits to copy the operation of the real system as precisely as possible. The second goal is to develop this simulation model into a user-friendly tool that one could use to find an “optimal” or “best” product batch schedule for a one year time period. Such a batch schedule could change dynamically as perturbations occur during operation that influence the behaviour of the entire system. The result of the simulation, the ‘best’ batch schedule is the one that minimizes the operational costs in the system. The costs involved in the simulation are inventory costs, interface costs, pumping costs, and penalty costs assigned to any unforeseen situations. The key factor to determine the performance of the simulation model is the way time is represented. In our model an event based discrete time representation is selected as most appropriate for our purposes. This means that the time horizon is divided into intervals of unequal lengths based on events that change the state of the system. These events are the arrival/departure of the tanker ships, the openings and closures of loading/unloading valves of storage tanks at both terminals, and the arrivals/departures of trains/trucks at the Delivery Terminal. In the feasibility study we analyse the system’s operational performance with different Head Terminal storage capacity configurations. For these alternative configurations we evaluated the effect of different tanker ship delay magnitudes on the number of critical events and product interfaces generated, on the duration of pipeline stoppages, the satisfaction of the product demand and on the operative costs. Based on the results and the bottlenecks identified, we propose modifications in the original setup.

Control of citrus black spot (Guignardia citricarpa) by biological control agents and other alternative products.

2007

Development of Core Design Methods and Tools for Gen-IV Heavy Liquid Metal Cooled Reactors

Heavy Liquid Metal Cooled Reactors are among the concepts, fostered by the GIF, as potentially able to comply with stringent safety, economical, sustainability, proliferation resistance and physical protection requirements. The increasing interest around these innovative systems has highlighted the lack of tools specifically dedicated to their core design stage. The present PhD thesis summarizes the three years effort of, partially, closing the mentioned gap, by rationally defining the role of codes in core design and by creating a development methodology for core design-oriented codes (DOCs) and its subsequent application to the most needed design areas. The covered fields are, in particular, the fuel assembly thermal-hydraulics and the fuel pin thermo-mechanics. Regarding the former, following the established methodology, the sub-channel code ANTEO+ has been conceived. Initially restricted to the forced convection regime and subsequently extended to the mixed one, ANTEO+, via a thorough validation campaign, has been demonstrated a reliable tool for design applications. Concerning the fuel pin thermo-mechanics, the will to include safety-related considerations at the outset of the pin dimensioning process, has given birth to the safety-informed DOC TEMIDE. The proposed DOC development methodology has also been applied to TEMIDE; given the complex interdependence patterns among the numerous phenomena involved in an irradiated fuel pin, to optimize the code final structure, a sensitivity analysis has been performed, in the anticipated application domain. The development methodology has also been tested in the verification and validation phases; the latter, due to the low availability of experiments truly representative of TEMIDE's application domain, has only been a preliminary attempt to test TEMIDE's capabilities in fulfilling the DOC requirements upon which it has been built. In general, the capability of the proposed development methodology for DOCs in delivering tools helping the core designer in preliminary setting the system configuration has been proven.