951 resultados para Ethical framework
Resumo:
Eight new open-framework inorganic-organic hybrid compounds based on indium have been synthesized employing hydrothermal methods. All of the compounds have InO6, C2O4, and HPO3/HPO4/SO4 units connected to form structures of different dimensionality Thus, the compounds have zero- (I), two- (II, III, IV, V, VII, and VIII), and three-dimensionally (VI) extended networks. The formation of the first zero-dimensional hybrid compound is noteworthy In addition, concomitant polymorphic structures have been observed in the present study. The molecular compound, I, was found to be reactive, and the transformation studies in the presence of a base (pyridine) give rise to the polymorphic structures of II and III, while the addition of an acid (H3PO3) gives rise to a new indium phosphite with a pillared layer structure (T1). Preliminary density functional theory calculations suggest that the stabilities of the polymorphs are different, with one of the forms (II) being preferred over the other, which is consistent with the observed experimental behavior. The oxalate units perform more than one role in the present structures. Thus, the oxalate units connect two In centers to satisfy the coordination requirements as well as to achieve charge balance in compounds II, IV, and VI. The terminal oxalate units observed in compounds I, IV, and V suggest the possibility of intermediate structures. Both in-plane and out-of-plane connectivity of the oxalate units were observed in compound VI. The 31 compounds have been characterized by powder X-ray diffraction, IR spectroscopy, thermogravimetric analysis, and P-31 NMR studies.
Resumo:
This research applied Greenhalgh et al's (2005) organisational change theoretical framework and a case study method approach to explore the process of implementing a smoking cessation intervention for pregnant women. The study was carried out according to the principles laid down in the National statement on ethical conduct in human research, produced by the National Health and Medical Research Council, Australia. Ethical approval for the research was sought and received from Queensland University of Technology human research ethics committee, prior to the start of the study. The sample constituted four participants who had been involved in the process of disseminating a training programme for midwives to implement a smoking cessation intervention. Eight semi-structured interviews were undertaken with these participants and the interviews and background programme data were subjected to theoretical analysis. The data were analysed through the lens of the Greenhalgh et al (2005) framework. The result was a disaggregation and (re)aggregation of data in the formation of an analytical outcome (Charmaz, 2006).
Resumo:
A three-dimensional zinc arsenate with an interrupted zeolitic framework (-IIO), [C4N3H16](2)[Zn-5(AsO4)(4)(HAsO4)(2)], I has been synthesized solvothermally. The structure is built up from ZnO4, AsO4 and HAsO4 tetrahedral units connected alternatively through their vertices forming the 3-D structure possessing one-dimensional channels bound by 10 T-atoms (T = Zn, As), The framework density of the structure is 10.4 T-atoms which indicates considerable openness in its structure. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
A new framework is proposed in this work to solve multidimensional population balance equations (PBEs) using the method of discretization. A continuous PBE is considered as a statement of evolution of one evolving property of particles and conservation of their n internal attributes. Discretization must therefore preserve n + I properties of particles. Continuously distributed population is represented on discrete fixed pivots as in the fixed pivot technique of Kumar and Ramkrishna [1996a. On the solution of population balance equation by discretization-I A fixed pivot technique. Chemical Engineering Science 51(8), 1311-1332] for 1-d PBEs, but instead of the earlier extensions of this technique proposed in the literature which preserve 2(n) properties of non-pivot particles, the new framework requires n + I properties to be preserved. This opens up the use of triangular and tetrahedral elements to solve 2-d and 3-d PBEs, instead of the rectangles and cuboids that are suggested in the literature. Capabilities of computational fluid dynamics and other packages available for generating complex meshes can also be harnessed. The numerical results obtained indeed show the effectiveness of the new framework. It also brings out the hitherto unknown role of directionality of the grid in controlling the accuracy of the numerical solution of multidimensional PBEs. The numerical results obtained show that the quality of the numerical solution can be improved significantly just by altering the directionality of the grid, which does not require any increase in the number of points, or any refinement of the grid, or even redistribution of pivots in space. Directionality of a grid can be altered simply by regrouping of pivots.
Resumo:
A Batch Processing Machine (BPM) is one which processes a number of jobs simultaneously as a batch with common beginning and ending times. Also, a BPM, once started cannot be interrupted in between (Pre-emption not allowed). This research is motivated by a BPM in steel casting industry. There are three main stages in any steel casting industry viz., pre-casting stage, casting stage and post-casting stage. A quick overview of the entire process, is shown in Figure 1. There are two BPMs : (1) Melting furnace in the pre-casting stage and (2) Heat Treatment Furnace (HTF) in the post casting stage of steel casting manufacturing process. This study focuses on scheduling the latter, namely HTF. Heat-treatment operation is one of the most important stages of steel casting industries. It determines the final properties that enable components to perform under demanding service conditions such as large mechanical load, high temperature and anti-corrosive processing. In general, different types of castings have to undergo more than one type of heat-treatment operations, where the total heat-treatment processing times change. To have a better control, castings are primarily classified into a number of job-families based on the alloy type such as low-alloy castings and high alloy castings. For technical reasons such as type of alloy, temperature level and the expected combination of heat-treatment operations, the castings from different families can not be processed together in the same batch.
Resumo:
This paper considers the role for a Framework Convention on Global Health in addressing key challenges in women’s health at a global level. Part I analyses the conceptualization of health in terms of human rights and the linking of women’s rights and human rights. Part II seeks to identify pressing issues for women’s health, articulating 10 key challenges for women’s health. Part III considers the proposal for a Framework Convention on Global Health to meet global health needs. Finally, Part IV asks whether international law can provide a valuable platform to support recognition and achievement of women’s health rights and identifies key elements for supporting and promoting women’s health.
Resumo:
Smart everyday objects could support the wellbeing, independent living and social connectedness of ageing people, but their successful adoption depends upon them fitting with their skills, values and goals. Many technologies fail in this respect. Our work is aimed at designs that engage older people by building on their individual affective attachment to habituated objects and leveraging, from a participatory design perspective, the creative process through which people continuously adapt their homes and tools to their own lifestyle. We contribute a novel analytic framework based on an analysis of related research on appropriation and habituated objects. It identifies steps in appropriation from inspection to performance and habituation. We test this framework with the preliminary testing of an augmented habituated object, a messaging kettle. While only used in one home so far, its daily use has provoked many thoughts, scenarios and projections about use by friends, both practical, utopian and dystopian.
Resumo:
The insulation in a dc cable is subjected to both thermal and electric stress at the same time. While the electric stress is generic to the cable, the temperature rise in the insulation is, by and large, due to the Ohmic losses in the conductor. The consequence of this synergic effect is to reduce the maximum operating voltage and causes a premature failure of the cable. The authors examine this subject in some detail and propose a comprehensive theoretical formulation relating the maximum thermal voltage (MTV) to the physical and geometrical parameters of the insulation. The heat flow patterns and boundary conditions considered by the authors here and those found in earlier literature are provided. The MTV of a dc cable is shown to be a function of the load current apart from the resistance of the insulation. The results obtained using the expressions, developed by the authors, are compared with relevant results published in the literature and found to be in close conformity.
Resumo:
This chapter presents an inquiry learning framework that can be used as a pathway for the development of information literacy in both K-12 and higher education. Inquiry learning is advocated as an authentic and active approach that draws upon students’ natural curiosity. The pedagogical and curriculum framework incorporates three major elements: questioning frameworks, information literacy and an iterative research cycle. Models and strategies for the elements of the framework are presented and discussed. The chapter ends with an acknowledgement of the challenges associated with implementing inquiry learning.
Resumo:
This poster summarises the outcomes of a national project to develop and provide a holistic framework consisting of a series of sequential and increasingly sophisticated stages that will allow higher education institutions (HEIs) to manage and improve their student engagement and retention strategies/programs.
Resumo:
Hydrothermal reactions between uranium salts and arsenic pentoxide in the presence of two different amines yielded six new uranium arsenate phases exhibiting open-framework structures, ethylenediamine (en): [C2N2H9]-[(UO2)(ASO(4))] I; [C2N2H10][(UO2)F(HASO(4))]2 center dot 4H(2)O, II; [C2N2H9][U2F5(HASO(4))(2)], III; [C2N2H9][UF2(ASO(4))], IV; diethylenetriamine (DETA), [C4N3H16][U2F3(ASO(4))(2)(HAsO4)] V; and [C4N3H16][U2F6(AsO4)(HAsO4)], VI. The structures were determined using single crystal studies, which revealed two- (I, II, V) and three-dimensional (III, IV, VI) structures for the uranium arsenates. The uranium atom, in these compounds, exhibits considerable variations in the coordination (6 to 9) that appears to have some correlation with the synthetic conditions. The water molecules in [C2N2H10][(UO2)F(HAsO4)](2 center dot)4H(2)O, II, could be reversibly removed, and the dehydrated phase, [C2N2H10][(UO2)F(HAsO4)](2), IIa, was also characterized using single crystal studies. The observation of many mineralogical structures in the present compounds suggests that the hydrothermal method could successfully replicate the geothermal conditions. As part of this study, we have observed autunite, Ca[(UO2)(PO4)](2)(H2O)(11), metavauxite, [Fe(H2O)(6)][Al(OH)(H2O)(PO4)](2), finarite, PbCU(SO4)(OH)(2), and tancoite, LiNa2H[Al(PO4)(2)(OH)], structures. The repeated observation of the secondary building unit, SBU-4, in many of the uranium arsenate structures suggests that these are viable building units. Optical studies on the uranium arsenate compound, [C4N3H16][U2F6(AsO4)(HASO(4))), VI, containing uranium in the +4 oxidation state indicates a blue emission through an upconversion process. The compound also exhibits antiferromagnetic behavior.
Resumo:
The required professional and ethical pronouncements of accountants mean that auditors need to be competent and exercise due care and skill in the performance of their audits. In this study, we examine what happens when auditors take on more clients than they should, thus raising doubts about their ability to maintain competence and audit quality. Using 2803 observations of Malaysian companies from 2010 to 2013, we find that auditors with multiple clients are associated with lower earnings quality, proxied by total accruals and discretionary accruals. Our results demonstrate that associating client firms’ reported discretionary accruals with individual auditors, rather than their firms or offices, is important in determining audit quality. Moreover, we demonstrate that the disclosure of auditors’ signatures on their reports is useful for assessing auditor quality at the individual level, thus contributing to the debate on the usefulness of having auditor identities on reports.
Resumo:
The aim of the study was to find out how the consumption of the population in Finland became a target of social interest and production of statistical data in the early 20th century, and what efforts have been made to influence consumption with social policy measures at different times. Questions concerning consumption are examined through the practices employed in the compilation of statistics on it. The interpretation framework in the study is Michael Foucault s perspective of modern liberal government. This mode of government is typified by pursuit of efficiency and search of equilibrium between economic government and a government of the processes of life. It shows aspirations towards both integration and individualisation. The government is based on freedom practices. It also implies knowledge-based ways of conceptualising reality. Statistical data are of specific significance in this context. The connection between the government of consumption and the compilation of statistics on it is studied through the theoretical, socio-political and statistical conceptualisation of consumption. The research material consisted of Finnish and international documentation on the compilation of statistics on consumption, publications of social programmes, and reports of studies on consumption. The analysis of the material focused especially on the problematisations related to consumption found in these documents and on changes in them over history. There have been both clearly observable changes and as well as historical stratification and diversity in the rationalities and practices of consumption government during the 20th century. Consumption has been influenced by pluralistic government, based at different times and in varying ways on the logics of solidarity and markets. The difference between these is that in the former risks are prepared for collectively while in the latter risks are individualised. Despite the differences, the characteristic that is common to these logics is certain kind of contractuality. They are both permeated by the household logic which differs from them in that it is based on the normative and ethical demands imposed on an individual. There has been a clear interactive connection between statistical data and consumption government. Statistical practices have followed changes in the way consumption has been conceptualised in society. This has been reflected in the statistical phenomena of interest, concepts, classifications and indicators. New ways of compiling statistics have in their turn shaped perceptions of reality. Statistical data have also facilitated a variety of rational calculations with which the consequences of the population s consumption habits have been evaluated at the levels of economy at large and individuals.
Resumo:
This study examines Institutional Twinning in Morocco as a case of EU cooperation through the pragmatic, ethical and moral logics of reason in Jürgen Habermas’s discourse ethics. As a former accession tool, Twinning was introduced in 2004 for legal approximation in the context of the European Neighborhood Policy. Twinning is a unique instrument in development cooperation from a legal perspective. With its long historical and cultural ties to Europe, Morocco presents an interesting case study of this new form of cooperation. We will analyse motives behind the Twinning projects on illegal immigration, environment legislation and customs reform. As Twinning is a new policy instrument within the ENP context, there is relatively little preceding research, which, in itself, constitutes a reason to inquire into the subject. While introducing useful categories, the approaches discussing “normative power Europe” do not offer methodological tools precise enough to analyse the motives of the Twinning cooperation from a broad ethical standpoint. Helene Sjursen as well as Esther Barbé and Elisabeth Johansson-Nogués have elaborated on Jürgen Habermas’ discourse ethics in determining the extent of altruism in the ENP in general. Situating the analysis in the process-oriented framework of Critical Theory, discourse ethics provides the methodological framework for our research. The case studies reveal that the context in which they operate affects the pragmatic, ethical and moral aspirations of the actors. The utilitarian notion of profit maximization is quite pronounced both in terms of the number of Twinning projects in the economic sphere and the pragmatic logics of reason instrumental to security and trade-related issues. The historical background as well internal processes, however, contribute to defining areas of mutual interest to the actors as well as the motives Morocco and the EU sometimes described as the external projection of internal values. Through its different aspects, Twinning cooperation portrays the functioning of the pragmatic, ethical and moral logics of reason in international relations.