Spectrally isometric elementary operators

We present criteria for unital elementary operators (of small length) on unital semisimple Banach algebras to be spectral isometries. The surjective ones among them turn out to be algebra automorphisms.

More elementary operators that are spectrally bounded

We discuss some necessary and some sufficient conditions for an elementary operator x↦∑ⁿ_i=1a_ixb_i on a Banach algebra A to be spectrally bounded. In the case of length three, we obtain a complete characterisation when A acts irreducibly on a Banach space of dimension greater than three.

Locally quasi-nilpotent elementary operators

Let A be a unital dense algebra of linear mappings on a complex vector space X. Let φ = Σⁿ _i=1 M_ai,_bi be a locally quasi-nilpotent elementary operator of length n on A. We show that, if {a1, . . . , an} is locally linearly independent, then the local dimension of V (φ) = span{b_ia_j : 1 ≤ i, j ≤ n} is at most n(n−1) 2 . If ldim V (φ) = n(n−1) 2 , then there exists a representation of φ as φ = Σⁿ _i=1 M_ui,_vi with v_iu_j = 0 for i ≥ j. Moreover, we give a complete characterization of locally quasinilpotent elementary operators of length 3.

Elementary operators-still not elementary?

Properties of elementary operators, that is, finite sums of two-sided multiplications on a Banach algebra, have been studied under a vast variety of aspects by numerous authors. In this paper we review recent advances in a new direction that seems not to have been explored before: the question when an elementary operator is spectrally bounded or spectrally isometric. As with other investigations, a number of subtleties occur which show that elementary operators are still not elementary to handle.

Non-Gaussian distribution of collective operators in quantum spin chains

We numerically analyse the behavior of the full distribution of collective observables in quantum spin chains. While most of previous studies of quantum critical phenomena are limited to the first moments, here we demonstrate how quantum fluctuations at criticality lead to highly non-Gaussian distributions. Interestingly, we show that the distributions for different system sizes collapse on thesame curve after scaling for a wide range of transitions: first and second order quantum transitions and transitions of the Berezinskii–Kosterlitz–Thouless type. We propose and analyse the feasibility of an experimental reconstruction of the distribution using light–matter interfaces for atoms in optical lattices or in optical resonators.

Orbits of semigroups of truncated convolution operators

We prove that a semigroup generated by finitely many truncated convolution operators on $L_p[0, 1]$ with 1 ≤ p < ∞ is non-supercyclic. On the other hand, there is a truncated convolution operator, which possesses irregular vectors.

Existence of disjoint weakly mixing operators that fail to satisfy the Disjoint Hypercyclicity Criterion

Recently, Bès, Martin, and Sanders [11] provided examples of disjoint hypercyclic operators which fail to satisfy the Disjoint Hypercyclicity Criterion. However, their operators also fail to be disjoint weakly mixing. We show that every separable, infinite dimensional Banach space admits operators T1,T2,…,TN with N⩾2 which are disjoint weakly mixing, and still fail to satisfy the Disjoint Hypercyclicity Criterion, answering a question posed in [11]. Moreover, we provide examples of disjoint hypercyclic operators T1, T2 whose corresponding set of disjoint hypercyclic vectors is nowhere dense, answering another question posed in [11]. In fact, we explicitly describe their set of disjoint hypercyclic vectors. Those same disjoint hypercyclic operators fail to be disjoint topologically transitive. Lastly, we create examples of two families of d-hypercyclic operators which fail to have any d-hypercyclic vectors in common.

Eigenfunctions and fundamental solutions of the fractional Laplace and Dirac operators: the Riemann-Liouville case

In this paper we study eigenfunctions and fundamental solutions for the three parameter fractional Laplace operator $\Delta_+^{(\alpha,\beta,\gamma)}:= D_{x_0^+}^{1+\alpha} +D_{y_0^+}^{1+\beta} +D_{z_0^+}^{1+\gamma},$ where $(\alpha, \beta, \gamma) \in \,]0,1]^3$, and the fractional derivatives $D_{x_0^+}^{1+\alpha}$, $D_{y_0^+}^{1+\beta}$, $D_{z_0^+}^{1+\gamma}$ are in the Riemann-Liouville sense. Applying operational techniques via two-dimensional Laplace transform we describe a complete family of eigenfunctions and fundamental solutions of the operator $\Delta_+^{(\alpha,\beta,\gamma)}$ in classes of functions admitting a summable fractional derivative. Making use of the Mittag-Leffler function, a symbolic operational form of the solutions is presented. From the obtained family of fundamental solutions we deduce a family of fundamental solutions of the fractional Dirac operator, which factorizes the fractional Laplace operator. We apply also the method of separation of variables to obtain eigenfunctions and fundamental solutions.

Propriétés hydrauliques d’un till compacté avec un faible pourcentage de particules argileuses

Les propriétés hydrauliques d’un till du Nord du Québec en condition saturée et non saturée ont été étudiées en laboratoire à l’aide de l’essai de conductivité hydraulique et l’essai de succion qui permet d’obtenir la courbe de rétention d’eau. Les essais ont été réalisés avec des échantillons compactés sous différentes conditions de teneur en eau et de masse volumique sèche, de manière à évaluer l’influence de ces conditions sur les propriétés hydrauliques. Les études précédentes ont montré qu’une structure agrégée se développe dans le till lorsqu’il est compacté de côté sec de l’optimum Proctor, c’est-à-dire à un degré de saturation de compactage inférieur au degré de saturation optimum (Sr0 < Sr-opt). Le till étudié dans le cadre de cette étude diffère de ceux utilisés dans les études précédentes par son très faible pourcentage de particules argileuses (< 2 μm) de 0,7%. L’objectif principal de cette étude est d’évaluer l’influence des conditions de compactage sur la conductivité hydraulique et la courbe de rétention d’eau et de déterminer si une structure agrégée se développe lorsque le till est compacté du côté sec de l’optimum. Les résultats expérimentaux typiques de la conductivité hydraulique saturée obtenus pour les échantillons compactés du côté humide de l’optimum (Sr0 > Sr-opt) avec un indice des vides de 0,328 varient de 2,6 x 10-7 à 8,6 x 10-7 m/s. Les conductivités hydrauliques typiques obtenues pour les échantillons compactés du côté sec de l’optimum (Sr0 < Sr-opt) avec le même indice des vides étaient très similaires, variant entre 2,4 x 10-7 et 9,1 x 10-7 m/s. Les courbes de rétention d’eau mesurées en laboratoire sont très semblables entre elles, présentant toutes une structure de sol homogène, peu importe si l’échantillon a été compacté du côté sec ou du côté humide. Il apparait que la conductivité hydraulique et la courbe de rétention d’eau de ce till sont très peu influencées par le degré de saturation de compactage. Ceci peut être expliqué par le très faible pourcentage de particules argileuses, qui prévient la formation d’agrégations de particules dans la structure du till lorsqu’il est compacté du côté sec de l’optimum Proctor. Plusieurs modèles d’estimation de la conductivité hydraulique sont utilisés. Cette étude propose trois nouveaux modèles d’estimation de la conductivité hydraulique saturée pour les tills du Nord du Québec. Le premier modèle met en relation la conductivité hydraulique saturée avec le diamètre des grains de la fraction fine (d50 FF) et le deuxième modèle est une équation modifiée de Kozeny-Carman et Hazen basée sur la porosité et une taille de particule effective (d10). Finalement, un modèle permettant d’évaluer l’effet de l’agrégation avec l’équation de Kozeny-Carman modifiée dans les tills compactés est proposé.

Pico Cell Integration to Operator’s Incident Management Process

Mobile network coverage is traditionally provided by outdoor macro base stations, which have a long range and serve several of customers. Due to modern passive houses and tightening construction legislation, mobile network service is deteriorated in many indoor locations. Typically, solutions for indoor coverage problem are expensive and demand actions from the mobile operator. Due to these, superior solutions are constantly researched. The solution presented in this thesis is based on Small Cell technology. Small Cells are low power access nodes designed to provide voice and data services.. This thesis concentrates on a specific Small Cell solution, which is called a Pico Cell. The problem regarding Pico Cells and Small Cells in general is that they are a new technological solution for the mobile operator, and the possible problem sources and incidents are not properly mapped. The purpose of this thesis is to figure out the possible problems in the Pico Cell deployment and how they could be solved within the operator’s incident management process. The research in the thesis is carried out with a literature research and a case study. The possible problems are investigated through lab testing. Pico Cell automated deployment process was tested in the lab environment and its proper functionality is confirmed. The related network elements were also tested and examined, and the emerged problems are resolvable. Operators existing incident management process can be used for Pico Cell troubleshooting with minor updates. Certain pre-requirements have to be met before Pico Cell deployment can be considered. The main contribution of this thesis is the Pico Cell integrated incident management process. The presented solution works in theory and solves the problems found during the lab testing. The limitations in the customer service level were solved by adding the necessary tools and by designing a working question pattern. Process structures for automated network discovery and pico specific radio parameter planning were also added for the mobile network management layer..

Cost efficient supply processes for the Compact Slim Elevator Door

The aim of this thesis was to observe possibilities to enhance the development of manufacturing costs savings and competitiveness related to the compact KONE Renova Slim elevator door. Compact slim doors are especially designed for EMEA markets. EMEA market area is characterized by highly competitive pricing and lead times which are manifested as pressures to decrease manufacturing costs and lead times of the compact elevator door. The new elevator safety code EN81-20 coming live during the spring 2016 will also have a negative impact on the cost and competitiveness development making the situation more acute. As a sheet metal product the KONE Renova slim is highly variable. Manufacturing methods utilized in the production are common and robust methods. Due to the low volumes, high variability and tight lead times the manufacturing of the doors is facing difficulties. Manufacturing of the doors is outsourced to two individual suppliers Stera and Wittur. This thesis was implemented in collaboration with Stera. KONE and Stera pursue a long term and close partnership where the benefits reached by the collaboration are shared equally. Despite the aims, the collaboration between companies is not totally visible and various barriers are hampering the development towards more efficient ways of working. Based on the empirical studies related to this thesis, an efficient standardized (A+) process was developed for the main variations of the compact elevator door. Using the standardized process KONE is able to order the most important AMDS door variations from Stera with increased quality, lower manufacturing costs and manufacturing lead time compared to the current situation. In addition to all the benefits, the standardized (A+) process also includes risks in practice. KONE and the door supplier need to consider these practical risks together before decisions are made.

Compactness in quasi-Banach function spaces and applications to compact embeddings of Besov-type spaces

There are two main aims of the paper. The first one is to extend the criterion for the precompactness of sets in Banach function spaces to the setting of quasi-Banach function spaces. The second one is to extend the criterion for the precompactness of sets in the Lebesgue spaces $L_p(\Rn)$, $1 \leq p < \infty$, to the so-called power quasi-Banach function spaces. These criteria are applied to establish compact embeddings of abstract Besov spaces into quasi-Banach function spaces. The results are illustrated on embeddings of Besov spaces $B^s_{p,q}(\Rn)$, $0

Eigenfunctions and fundamental solutions of the Caputo fractional Laplace and Dirac operators

In this paper, by using the method of separation of variables, we obtain eigenfunctions and fundamental solutions for the three parameter fractional Laplace operator defined via fractional Caputo derivatives. The solutions are expressed using the Mittag-Leffler function and we show some graphical representations for some parameters. A family of fundamental solutions of the corresponding fractional Dirac operator is also obtained. Particular cases are considered in both cases.