Modal testing and numerical modeling of the dynamic properties of layered sheet-steel structure

Recently, due to the increasing total construction and transportation cost and difficulties associated with handling massive structural components or assemblies, there has been increasing financial pressure to reduce structural weight. Furthermore, advances in material technology coupled with continuing advances in design tools and techniques have encouraged engineers to vary and combine materials, offering new opportunities to reduce the weight of mechanical structures. These new lower mass systems, however, are more susceptible to inherent imbalances, a weakness that can result in higher shock and harmonic resonances which leads to poor structural dynamic performances. The objective of this thesis is the modeling of layered sheet steel elements, to accurately predict dynamic performance. During the development of the layered sheet steel model, the numerical modeling approach, the Finite Element Analysis and the Experimental Modal Analysis are applied in building a modal model of the layered sheet steel elements. Furthermore, in view of getting a better understanding of the dynamic behavior of layered sheet steel, several binding methods have been studied to understand and demonstrate how a binding method affects the dynamic behavior of layered sheet steel elements when compared to single homogeneous steel plate. Based on the developed layered sheet steel model, the dynamic behavior of a lightweight wheel structure to be used as the structure for the stator of an outer rotor Direct-Drive Permanent Magnet Synchronous Generator designed for high-power wind turbines is studied.

Community structure of vascular plants in treefall gaps and fire-disturbed habitats in the Atlantic rainforest, southern Bahia, Brazil

The effects of disturbances on plant community structure in tropical forests have been widely investigated. However, a majority of these studies examined only woody species, principally trees, whereas the effects of disturbances on the whole assemblage of vascular plants remain largely unexplored. At the present study, all vascular plants < 5m tall were surveyed in four habitats: natural treefall gaps, burned forest, and their adjacent understorey. The burned area differed from the other habitats in terms of species composition. However, species richness and plant density did not differ between burned area and the adjacent understorey, which is in accordance to the succession model that predict a rapid recovery of species richness, but with a different species composition in areas under moderate disturbance. The treefall gaps and the two areas of understorey did not differ among themselves in terms of the number of individuals, number of species, nor in species composition. The absence of differences between the vegetation in treefall gaps and in understorey areas seems to be in agreement with the current idea that the species present in treefall gaps are directly related to the vegetation composition before gap formation. Only minimal differences were observed between the analyses that considered only tree species and those that considered all growth habits. This suggests that the same processes acting on tree species (the best studied group of plants in tropical forests) are also acting on the whole assemblage of vascular plants in these communities.

Reproductive biology of the herkogamous vine Chiococca alba (L.) Hitchc. (Rubiaceae) in the Atlantic Rain Forest, SE Brazil

The family Rubiaceae comprises a wide spectrum of floral mechanisms and two of them seem to be common in certain groups, e.g., distyly in Rubioidae and styllar pollen in Ixoroidae. These mechanisms include herkogamy, which is interpreted as a strategy that avoids self-pollination. This is the first report on the reproductive biology of Chiococca alba, a species that is widely distributed in America. We studied floral biology and the mating system, which were evaluated through fruit set comparisons after controlled crosses (self- and cross-pollinations and test for apomixis), as well as through the evaluation of pollen tube growth resulting from these controlled crosses. Flowers of C. alba are herkogamous, cream, protandrous and lasted for two days. No measurable nectar was found, despite the presence of a nectary-like structure at the base of the corolla tube. Chiococca alba is a preferentially self-incompatible species, but self-pollination and apomixis also contribute to the natural fruit-set. Its reproductive strategy (herkogamy associated with protandry) is different from that expected for members of Chiococceae tribe (i.e., styllar pollen presentation).

Open innovation model for a large company in the ICT industry: Case Ericsson LMF

Open innovation paradigm states that the boundaries of the firm have become permeable, allowing knowledge to flow inwards and outwards to accelerate internal innovations and take unused knowledge to the external environment; respectively. The successful implementation of open innovation practices in firms like Procter & Gamble, IBM, and Xerox, among others; suggest that it is a sustainable trend which could provide basis for achieving competitive advantage. However, implementing open innovation could be a complex process which involves several domains of management; and whose term, classification, and practices have not totally been agreed upon. Thus, with many possible ways to address open innovation, the following research question was formulated: How could Ericsson LMF assess which open innovation mode to select depending on the attributes of the project at hand? The research followed the constructive research approach which has the following steps: find a practical relevant problem, obtain general understanding of the topic, innovate the solution, demonstrate the solution works, show theoretical contributions, and examine the scope of applicability of the solution. The research involved three phases of data collection and analysis: Extensive literature review of open innovation, strategy, business model, innovation, and knowledge management; direct observation of the environment of the case company through participative observation; and semi-structured interviews based of six cases involving multiple and heterogeneous open innovation initiatives. Results from the cases suggest that the selection of modes depend on multiple reasons, with a stronger influence of factors related to strategy, business models, and resources gaps. Based on these and others factors found in the literature review and observations; it was possible to construct a model that supports approaching open innovation. The model integrates perspectives from multiple domains of the literature review, observations inside the case company, and factors from the six open innovation cases. It provides steps, guidelines, and tools to approach open innovation and assess the selection of modes. Measuring the impact of open innovation could take years; thus, implementing and testing entirely the model was not possible due time limitation. Nevertheless, it was possible to validate the core elements of the model with empirical data gathered from the cases. In addition to constructing the model, this research contributed to the literature by increasing the understanding of open innovation, providing suggestions to the case company, and proposing future steps.

First record of Reticulocaulis mucosissimus I. A. Abbott (Naccariaceae, Rhodophyta) for the western Atlantic Ocean

Espírito Santo State lies in the transition region (18°-21° S) between the tropical and subtropical marine-algal provinces and is considered the richest area of the Brazilian flora. The subtidal substratum presents extensive areas of rhodoliths associated with a diversified marine biota. A detailed exploration using Scuba diving technique has revealed many little-known and previously unreported taxa that are new to the Brazilian coast. Among the algae recently discovered, Reticulocaulis mucosissimus I. A. Abbott was found at a depth of 25 meters, thus consisting of the second member of the infrequently encountered family Naccariaceae growing in the same region. This work has revealed additional distribution records of this species not yet reported from the western Atlantic. Description of the morphological and reproductive features of the species as well as illustrations and comments are presented.

Patterns of litter production in a secondary alluvial Atlantic Rain Forest in southern Brazil

Above-ground litter production is one of the most accessible ways to estimate ecosystem productivity, nutrient fluxes and carbon transfers. Phenological patterns and climatic conditions are still not fully explained well for tropical and subtropical forests under less pronounced dry season and non-seasonal climates, as well as the interaction of these patterns with successional dynamics. Monthly litterfall was estimated for two years in a 9 to 10 year old secondary alluvial Atlantic Rain forest. Total litterfall was higher in the site with more developed vegetation (6.4 ± 1.2 ton ha-1 year-1; 95% confidence interval) as compared to the site with less developed vegetation (3.0 ± 1.0 ton ha-1 year-1). The monthly production of 11 litter fractions (eight fractions comprising the leaf litter of the seven main species of the community and other species; reproductive parts, twigs £ 2 cm diameter, and miscellaneous material) were correlated with meteorological variables making possible to identify three patterns of deposition. The main pattern, dominated by leaf-exchanging species, consisted of a cycle with the highest litterfall at the beginning of the rainy season, preceding by basically three months the peaks of the annual cycles of rainfall and temperatures. Other two patterns, dominated by brevi-deciduous species, peaked at the end of the rainy season and at the end of the non-rainy season. Tropical and subtropical dry forests that present the highest leaf fall gradually earlier than rain forests (as the studied sites) are possibly related to the start of senescence process. It seems that such process is triggered earlier by a more severe hydric stress, besides other factors linked to a minor physiological activity of plants that result in abscission.

Creating risk measurement model to project portfolio management in construction company

This thesis was carried out as a case study of a company YIT in order to clarify the sev-erest risks for the company and to build a method for project portfolio evaluation. The target organization creates new living environment by constructing residential buildings, business premises, infrastructure and entire areas worth for EUR 1.9 billion in the year 2013. Company has noted project portfolio management needs more information about the structure of project portfolio and possible influences of market shock situation. With interviews have been evaluated risks with biggest influence and most appropriate metrics to examine. The major risks for the company were evaluated by interviewing the executive staff. At the same time, the most appropriate risk metrics were considered. At the moment sales risk was estimated to have biggest impact on company‟s business. Therefore project port-folio evaluation model was created and three different scenarios for company‟s future were created in order to identify the scale of possible market shock situation. The created model is tested with public and descriptive figures of YIT in a one-year-long market shock and the impact on different metrics was evaluated. Study was conducted using con-structive research methodology. Results indicate that company has notable sales risk in certain sections of business portfolio.

Floristic composition and similarity analysis of an Atlantic rain forest fragment in Cananéia, São Paulo State, Brazil

The aim of this study is to investigate the floristic composition of an Atlantic rain forest fragment located in Cananéia, São Paulo, Brazil, and to contribute to the knowledge on Atlantic forest through the comparative analysis of this and other floristic surveys both on the southern and southeastern Brazil, in different soil and relief types. We surveyed 215 species in 132 genera and 51 families. Classification and ordination analysis were applied to a binary matrix in order to analyze the similarity among 24 surveys, including the present one, of Atlantic forest from the south and southeast coast of Brazil. Higher floristic similarity was observed among this area and the ones where there was marine influence and more rugged relief. The surveys in areas with greater marine influence (sandy soil) were separated from those in other conditions, possibly indicating a species replacement gradient from the steep slopes towards the lowland and were probably related to different edaphic conditions. A latitudinal gradient was found among the surveys apparently confirming a continuous species replacement along the Atlantic forest, related to a restricted distribution of the species. This suggests that it is essential to preserve areas from the whole Atlantic coast. Atlantic forest distribution is quite complex and its composition cannot be adequately represented by small localized areas.

Value-based Reference Marketing in a Small Process Industry Software and Service Company

This master’s thesis was done for a small company, Vipetec Oy, which offers specialized technological services for companies mainly in forest industry. The study was initiated partly because the company wants to expand its customer base to a new industry. There were two goals connected to each other. First was to find out how much and what kind of value current customers have realized from ATA Process Event Library, one of the products that the company offers. Second was to determine the best way to present this value and its implications for future value potential to both current and potential customers. ATA helps to make grade and product changes, starting after machine downtime, and recovery from production break faster for customers. All three events sometimes occur in production line. The faster operation results to savings in time and material. In addition to ATA Vipetec also offers other services related to development of automation and optimization of controls. Theoretical part concentrates on the concept of value, how it can be delivered to customers, and what kind of risk customer faces in industrial purchasing. Also the function of reference marketing towards customers is discussed. In the empirical part the realized value for existing customers is evaluated based on both numerical data and interviews. There’s also a brief case study about one customer. After that the value-based reference marketing for a target industry is examined through interviews of these potential customers. Finally answers to the research questions are stated and compared also to the theoretical knowledge about the subject. Results show that those customers’ machines which use the full service concept of ATA usually are able to save more time and material than the machines which use only some features of the product. Interviews indicated that sales arguments which focus on improved competitive status are not as effective as current arguments which focus on numerical improvements. In the case of potential customers in the new industry, current sales arguments likely work best for those whose irregular production situations are caused mainly by fault situations. When the actions of Vipetec were compared to ten key elements of creating customer references, it was seen that many of them the company has either already included in its strategy or has good chances to include them with the help of the results of this study.

Flowering and fruiting of Aulonemia aristulata: a gynomonoecious woody bamboo species from Atlantic Forest in Brazil

Aulonemia aristulata (Döll) McClure is a lignified bamboo species endemic to Brazil. This species occurs in southeastern forests and can reach high density at forest edges, dominating the understory of canopy-disturbed forest patches. The goal of this study was to describe the flowering period, floral biology, fruiting and seedling recruitment of A. aristulata in natural conditions in two areas located in a segment of the Atlantic Forest. Data on the morphology of the synflorescences and florets, timing and sequence of the anthesis events and floral visitors were recorded. Natural pollinators (open pollination or control) as well as spontaneous self-pollination were also checked. Pollen viability was estimated using the acetocarmine technique. Aulonemia aristulata is monocarpic (semelparous) with gregarious flowering. All culms in both studied areas blossomed and fruited between August and November 2007, dying subsequently between December 2007 and April 2008. Two types of synflorescences and flowers were observed: terminal with bisexual and protandric florets, with the anthesis lasting for 3-4 days; and axillary, with morphologically bisexual, but functionally female, florets and anthesis lasting for 3-4 days. The latter were also observed in the rhizome of plants whose aerial portion had been removed. The presence of axillary synflorescences with pistillate flowers is described here for the first time in Aulonemia species. Moreover, this is the first report of gynomonoecy in woody bamboo. Fruiting from bisexual florets under natural conditions (35%) was superior to that obtained from bagged synflorescences (11.5%). Fruiting from functional female florets was around 20%. Pollen viability was on the average of 90%. The results suggest that Aulonemia aristulata is anemophilous. The massive bamboo seedling recruitment observed after dieback with the ability to colonize open areas could promote the regeneration of Aulonemia aristulata.

The Genus Herposiphonia (Ceramiales, Rhodophyta) in the Coral Reefs Environmental Protection Area, Northeastern Brazil, with new records for Brazil and the Atlantic Ocean

This paper presents a taxonomic study of taxa of the red algae genus Herposiphonia (Ceramiales) occurring on Maracajaú Reef in the Coral Reefs Environmental Protection Area (CREPA - Área de Proteção Ambiental dos Recifes de Corais) in Rio Grande do Norte State, along the northeastern coast of Brazil. The CREPA comprises coastline and continental shelf areas of the municipalities of Touros, Rio do Fogo, and Maxaranguape and includes sand dunes, coastal lagoons, and the adjacent shoreline and offshore reefs. Detailed morphological studies were made, considering recent taxonomic criteria for species delimitation of Herposiphonia, and five species were identified: H. delicatula, H. nuda, H. parca, H. secunda, and H. tenella, thus increasing the number of species in the genus from three to six. Herposiphonia delicatula and H. parca represent new occurrences for Brazil, and H. nuda is reported for the first time for the Atlantic Ocean.

A new species of Lemmermanniella (Cyanobacteria) from the Atlantic Rainforest, Brazil

The Brazilian Atlantic Rainforest is a highly heterogeneous ecosystem comprising large numbers of tropical and subtropical habitats favorable to the development of cyanobacteria. Studies on cyanobacteria in this ecosystem are still rare, however, especially those involving unicellular and colonial types. The high biodiversity and endemism of this biome has been extremely impacted and fragmented, and less than 10% of its original vegetation cover remains today. We describe here a new species of a colonial cyanobacteria, Lemmermanniella terrestris, found on dry soils in a subtropical region of the Atlantic Rainforest in the municipality of Cananéia in southern São Paulo State, Brazil. This new taxon demonstrated all of the diacritical features of the genus Lemmermanniella but, unlike the other species of the genus, it was growing on the soil surface and not in an aquatic environment. A set of morphological features, including colonies composed of subcolonies, and cell dimensions, shapes and contents distinguish it from other species of the genus. Considering that species of Lemmermanniella are found in very distinct habitats (such as thermal and brackish waters) and that they maintain the same life cycle described for the genus in all of those environments, the morphological structures of the colonies can be used as reliable markers for identifying the genus, and its species differ primarily in relation to the habitats they occupy.

Raskaita teräsrakenteita valmistavan tilauskonepajan tuotannon kehittäminen

Diplomityössä tarkastellaan raskaita teräsrakenteita valmistavan tilauskonepajan tuotannon kehittämiskohteita. Tuotannon kehittämisellä halutaan nopeuttaa tuotannon läpimenoaikoja, vähentää laatukustannuksia ja parantaa yrityksen tiedonkulkua. Näillä toimenpiteillä pyritään vaikuttamaan yrityksen kilpailukykyyn, jolloin se voi nousta suomalaisessa toimittajaverkostossa korkeammalle portaalle. Työn teoriaosassa paneudutaan tuottavuus- ja laatuajatteluun hitsaavassa konepajassa. Samalla esitellään eräitä konepajoissa tyypillisimmin käytettyjä laatustandardeja, joita ovat: SFS-EN ISO 9001, SFS-EN ISO 3834 ja SFS-EN 1090. Lisäksi teoriaosiossa on kerrottu erilaisista tuotannonohjausjärjestelmistä ja layout-teorioista. Tämän diplomityön kohdeyritys on Karjalan Konepaja Oy. Yrityksen nykytilanteen kartoittamiseksi suoritettiin useita haastatteluita sekä laadittiin koko organisaatiota koskeva kysely. Tilauskonepajan haasteena ovat alati muuttuvat tilaukset. Tilauskonepajan tuotannon kehittäminen tulee aloittaa sopivien tuotannontehokkuutta mittaavien mittareiden määrittämisellä. Usein kapasiteetti ja tuottavuus kuvastavat parhaiten työvaiheiden tehokkuutta. Mittareiden tarkoitus on auttaa konepajaa löytämään ne tuotannon pullonkaulat, joista yrityksen kehittäminen tulisi aloittaa. Lean-filosofian avulla tulee kehittää tuotannosta hitaimmin suoriutuvia työvaiheita. Tarkoituksena on poistaa valmistusketjusta sellaiset työvaiheet, jotka eivät anna tuotteelle lisäarvoa. Lisäksi työpisteiden layout kannattaa kyseenalaistaa aika ajoin, sillä jo pienilläkin muutoksilla voidaan saada parannuksia työpisteiden tuottavuuteen ja kapasiteettiin.

Centralized IT management using SCCM in a large multinational company

Microsoft System Center Configuration Manager is a systems management product for managing large groups of computers and/or mobile devices. It provides operating system deployment, software distribution, patch management, hardware & software inventory, remote control and many other features for the managed clients. This thesis focuses on researching whether this product is suitable for large, international organization with no previous, centralized solution for managing all such networked devices and detecting areas, where the system can be altered to achieve a more optimal management product from the company’s perspective. The results showed that the system is suitable for such organization if properly configured and clear and transparent line of communication between key IT personnel exists.

The radio frequency identification technology in the supply chain management: a case of a big logistics company

Nowadays global business trends force the adoption of innovative ICTs into the supply chain management (SCM). Particularly, the RFID technology is on high demand among SCM professionals due to its business advantages such as improving of accuracy and veloc-ity of SCM processes which lead to decrease of operational costs. Nevertheless, a question of the RFID technology impact on the efficiency of warehouse processes in the SCM re-mains open. The goal of the present study is to experiment the possibility of improvement order picking velocity in a warehouse of a big logistics company with the use of the RFID technology. In order to achieve this goal the following objectives have been developed: 1) Defining the scope of the RFID technology applications in the SCM; 2) Justification of the RFID technology impact on the SCM processes; 3) Defining a place of the warehouse order picking process in the SCM; 4) Identification and systematization of existing meth-ods of order picking velocity improvement; 5) Choosing of the study object and gathering of the empirical data about number of orders, number of hours spent per each order line daily during 5 months; 6) Processing and analysis of the empirical data; 7) Conclusion about the impact of the RFID technology on the speed of order picking process. As a result of the research it has been found that the speed of the order picking processes has not been changed as time has gone after the RFID adoption. It has been concluded that in order to achieve a positive effect in the speed of order picking process with the use of the RFID technology it is necessary to simultaneously implement changes in logistics and organizational management in 3PL logistics companies. Practical recommendations have been forwarded to the management of the company for further investigation and procedure.