Comportamiento de los aceros refractarios AISI 304 y HP40+Nb sometidos a altas temperaturas y una atmósfera oxi-carburizante

Tesis (Maestría en Ciencias de la Ingeniería Mécanica con especialidad en Materiales) U.A.N.L.

Ruta y cat??logo audiovisual del arte mud??jar en la Comunidad de Villa y Tierra de Cu??llar

Registro con c??digo de documento duplicado y modificado posteriormente

Tractatus de penite[n]tijs et actib[us] penite[n]tium y confessoru[m] cu[m] forma absolutionu[m] [et] de canonibus penitétialibus.

Fernández Valladares,

Estudo de duas pseudoligas de Nb-Cu obtidas pela rota da metalurgia do pó

The Nb-Cu pseudoalloys present themselves as potential substitutes for the alloys from a well known system and already commercially applied, as the W-Cu alloys, used in applications such as heat sinks, electrical contacts and coils for the generation of high magnetic fields. Because it is an immiscible system, where there is mutual insolubility and low wettability of the liquid Cu on the Nb surface, the processing route used in this work was the Powder Metallurgy. Two Nb alloys were used, with additions of 10% and 20% in weight of Cu, and times of 20, 30 and 40 hours for the high energy milling of the starting powders. The milling evolution of the powders is presented through the characterization techniques, such as the LASER diffraction for particle size, XRD, SEM, EDS, DSC, dilatometry, TEM and chemical analysis. After the milling, portions of the loads were submitted to the annealing heat treatment. The process used for the samples consolidation was the hot pressing, which has been applied both on some milled powders samples, as on the annealed powders. Subsequent heat treatments were performed in the samples at temperatures of 1000ºC (solid phase) and 1100ºC (in the Cu liquid phase). All sets of consolidated samples, and also the two sets of the heat treated, were analyzed by XRD, SEM, EDS, density and Vickers microhardness. Moreover, other Nb powder samples with 10% and 20% in weight of Cu obtained by simple mechanical mixing, were consolidated, thermally treated and characterized with the same techniques applied to the others, and the results were compared among themselves. Despite the difficulty of consolidation and densification of the two pseudoalloys of the Nb-Cu system of this study, on the route that passes through the HEM, samples were obtained with densities around 90% of the theoretical density. And, on the processing route of which were only mixed, the values reached up to 97%. Therefore, in this work are also emphasized the processes that made possible these results.

High-temperature superconductivity in the 100 K region in perovskite-related oxides of the Ln-Ba-Cu-O (Ln=Y or La) system

Oxides of the Y-Ba-Cu-O system are found to show onset of superconductivity in the 100–120 K region.

Growth rate of YBCO single grains containing Y-2411(M)

Y-Ba-Cu-O (YBCO) single grains have the potential to generate large trapped magnetic fields for a variety of engineering applications, and research on the processing and properties of this material has attracted world-wide interest. In particular, the introduction of flux pinning centres to the large grain microstructure to improve its current density, Jc, and hence trapped field, has been investigated extensively over the past decade. Y 2Ba4CuMOx [Y-2411(M)], where M = Nb, Ta, Mo, W, Ru, Zr, Bi and Ag, has been reported to form particularly effective flux pinning centres in YBCO due primarily to its ability to exist as nano-size inclusions in the superconducting phase matrix. However, the addition of the Y-2411(M) phase to the precursor composition complicates the melt-processing of single grains. We report an investigation of the growth rate of single YBCO grains containing Y-2411(Bi) phase inclusions and Y2O3. The superconducting properties of these large single grains have been measured specifically to investigate the effect of Y2O3 on broadening the growth window of these materials. © 2010 IOP Publishing Ltd.

Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements

Thin films of nano-composite Y-Ba-Cu-O (YBCO) superconductors containing nano-sized, non-superconducting particles of Y2Ba 4CuMOx (M-2411 with M = Ag and Nb) have been prepared by the PLD technique. Electron backscatter diffraction (EBSD) has been used to analyze the crystallographic orientation of nano-particles embedded in the film microstructure. The superconducting YBa2Cu3O7 (Y-123) phase matrix is textured with a dominant (001) orientation for all samples, whereas the M-2411 phase exhibits a random orientation. Angular critical current measurements at various temperature (T) and applied magnetic field (B) have been performed on thin films containing different concentration of the M-2411 second phase. An increase in critical current density J c at T < 77 K and B < 6 T is observed for samples with low concentration of the second phase (2 mol % M-2411). Films containing 5 mol % Ag-2411 exhibit lower Jc than pure Y-123 thin films at all fields and temperatures. Samples with 5 mol % Nb-2411 show higher Jc(B) than phase pure Y-123 thin films for T < 77 K. © 2010 IOP Publishing Ltd.

I：新型稀土永磁材料Nd-Fe-B氧化过程及抗氧化新体系研究II：CuO、Y_2Cu_2O_5、BaCuO_2和RBa_2Cu_3O_(7-δ)超导体磁化率及Cu价态研究

本论文由两大部分组成。第一部分是新型稀土永磁材料Nd-Fe-B氧化过程及抗氧化新体系的研究。Nd-Fe-B永磁体是1983年问世的新型稀土永磁材料。和原有的铁氧体及Sm-Co体系相比，具有磁能积高（50MGOe）。价廉源广，制备简单等三大优点；也有居里温度低（310℃），温度系数大（－0.126%/K），易氧化等三大缺点，我们对Nd-Fe-B合金的氧化过程进行研究，发现该材料热稳定性差，容易发生氧化反应，氧化使材料的结构受到破坏，并给材料的磁性造成不可恢复的损失，整个氧化过程是分阶段的。在室温和干燥的空气中材料基本是稳定的。150℃以下材料磁性受到破坏的主要原因是体系中Nd的氧化。230℃以上材料主体成分Fe也开始氧化，温度升高使反应进程大大加快。到800℃左右反应基本结束，最终产物主要为Fe_2O_3, Nd_2O_3·FeNdO_3和NdBO_3。增加体系中B的相对含量和添加某些新的元素均能提高材料的抗氧化能力，新研制的Nd-Fe-B-Si四元体系和原来的Nd-Fe-B体系相比具有下列显著优点：新体系的抗氧化能力大大提高，经过150℃的长期恒温试验，材料的结构，磁性均未受到破坏，某些体系甚至能在更高的温度下使用，另外，新体系的居里温度Tc也大为提高。比原有Nd-Fe-B磁体高40℃左右。因此该体系是一种大有发展前途的新材料。此外，我们用动态热重法研究了Nd-Fe-B合金的氧化动力学过程，但由于我们新合成的体系构相较为复杂，未能达到预期效果。第二部分是CuO，Y_2Cu_2O_5，BaCuO_2和RBa_2Cu_3O_(7-δ)超导体（R稀土元素）磁化率及铜价态研究，铜的氧化物具有复杂的化学计量关系和磁学性质。在对CuO的磁化率研究中，我们发现在低温区（77K－110K）和一定磁场下，CuO由顺磁突变为抗磁。这种转变与磁场强度有很大关系。这一结果与前人的工作有较大的出入。而与超导体的形为极为相似。所不同的是，转变温度与样品的重量也有关系。实验结果重复。由于铜氧性质在R-Ba-Cu-O超导体中起决定作用，因此有必要对CuO的低温磁性作进一步研究。此外，我们对文献尚未报道的Y_2Cu_2O_5的磁化率在77－300K温度区间进行了测量，发现它是顺磁性物质，室温有效磁矩μ_(eff) = 2.13μB。高于Cu~(2+)的理论有效磁矩（1.73μB）。经过碘量法价态分析，发现Y_2Cu_2O_5中有部分Cu~(3+)，这与磁化率的测定相符合。Tc在90K左右的Y-Ba-Cu-O体系是近期才发现的具有超高温超导材料。该体系有着独特的结构和性质。在对R-Ba-Cu-O及R-Ba-Cu-O-Ag超导体的研究中，我们发现此类超导体属II类超导体，在临界温附近该超导体由顺磁转变为抗磁，此种变化与磁场强度有很大关系，当场强大于一定值后，则观察不到这种转变。在对RBa_2Cu_3O_(7-δ) (R = Y, Sm, Eu, Gd, Dy, Ho, Er, Tm)超导体和具有相同配比但由于合成工艺条件不同而不超导的R'Ba_2Cu_3O_(7-δ) (R' = Y, Sm, Eu, Gd)非超导体的铜价态分析中，我们发现此两类化合物中均含有一定量的Cu~(3+)。且超导体中Cu~(3+)的含量高于非超导体中Cu~(3+)的含量（同样比例）。我们还发现Cu~(3+)对水极为敏感，将RBa_2Cu_3O_(7-δ) (除R = Gd, Dy, Er)超导体在未干燥容器中测出的Cu~(3+)量远远低于干燥容器中所测得的值。我们认为这可能是引起超导体不稳定的重要原因。由于尚缺乏用其它手段检测到超导体中Cu~(3+)存在的例证。故对此问题还有待于今后继续作进一步的研究。

层状La-Ba-Cu复合氧化物在CO还原NO反应中活性的研究

氮氧化物是严重的空气污染物,催化消除氮氧化物是环保催化研究的热点问题,在已有报道的催化剂体系中复合氧化物和含铜分子筛受到人们的普遍关注,文献中已有报道ABO_3(A=Ln;B=Cr,Mn,Fe,Co,Ni)型复合氧化物作为CO还原NO反应的催化剂.但迄今尚未见有合成LaCuO_3的报道,有关含铜复合氧化物作催化剂的大多是A_2BO_4型的.呈ABO_3结构的含铜复合氧化物只有成层状的超导体如YBa_2Cu_3O_7,本文为了探讨复合氧化物晶体结构对催化活性的影响,首次研究了3种层状ABO_3结构的La-Ba-Cu复合氧化物对CO还原NO反应的活性,发现它们均具有较高的活性,并首次提出了Ba离子在此反应中的作用.1 实验方法催化剂的制备和Cu价态分析见文献[4,5]CO还原NO反应在固定床流动反应体系中进行,反应管为内径6mm石英管,催化剂粒度为40～80目,用量0.2g,空速为7000h~(-1),原料气为NO7.5×10~(-3),CO8.0×10~(-3),He平衡.采用英国产的Pyc Pan气相色谱分析检测N_2O,CO_2,0.5nm分子筛色谱柱检测NO,CO转化率. H_2-TPR在自制装置上...

Y_(1-x)Ca_xBa_2Cu_3O_(7-y)超导材料的研究

研究了Y_(1-x)Ca_xBa_2Cu_3O_(7-y)系超导材料,当x≤0.15时,钙离子部分置换了123相中钇离子而形成固溶体,导致正交相晶胞参数稍微增大。钙含量增加,三价铜的含量上升,T_c却下降。由于钙离子取代钇离子后主要影响邻近的Cu(2)-O层的性质,这说明Cu(2)-O层的性质对超导电性起了很重要的作用。

内陆湖沼相和近海沼泽相沉积环境煤中微量元素和矿物的对比研究—以辽宁北票、江西建新和桥头煤研究为例

Using knowledge of geology, geochemistry, coal petrology, mineralogy, by means of a variety of advanced measuring methods such as inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled atomic emission spectrometry (ICP-AES), X-ray powder diffraction (XRD), scanning electron microscopy with energy-dispersive spectrometer(SEM-EDS), sequential chemical extract and density fractions, the characteristics of trace elements and minerals in Jurassic Beipiao coal mine under inland limnetic sedimentary environment and in late Permian Jianxin and Qiaotou coal mines under paralic swamp sedimentary environment were studied. Compared with the average concentration in the world bituminous coals, the Beipiao coal was characterized by relatively high contents of Sc, Ti, Cr, Co, Ni, Zn, Se, Sr, Zr, Y, Ba, REE and Th, and lower contents of V, Rb, Cd, Sn, Pb, Bi and U; while the Jianxin coal was relatively enriched in Li, Sc, Ga, Sr, Y, Nb, Sb, Th and U, with low concentration of Be, Co, Ni, Cu, Ge, Zr, Mo, Cd, Cs, Ba, Pb and Bi; and the Qiaotou coal was enriched in Li, Sc, Sr, Nb, Ta, Zr, REE, Hf, Th and U, with low concentration of Be, V, Co, Ni, Cu, Ge, Mo, Cd, Cs, Ba, Tl, Pb and Bi. The concentrations of Ca, Mg and K in Beipiao coal are higher than those in Jianxin coal and Qiaotou coal, while Fe, S and Ti in Beipiao coal are lower than those in Jianxin coal and Qiaotou coal. The proximate analysis of coal samples was carried out, which indicated that Beipiao coal was medium- to high- ash (5.92-60.68%) with low sulphur coal, and Jianxin coal and Qiaotou coal was medium to high ash (8.85-46.33%) with high sulphur. The reflectivity was measured, which explained that Beipiao coal belonged to high volatile bituminous coal, Jianxin coal was low volatile bituminous coal and Qiaotou coal was low volatile anthracite. Quantitative maceral analyses were studied. The characteristics of rare earth elements (REE) were investigated, which showed that the total contents of REE were higher than that of the world's average content. With the increase of coal's metamorphic grade, the total contents of REE decreased from 98.5 X 10"6 of Beipiao coal to 94.2 X 10"6 of Jianxin coal, and to 75.9 X 10"6 of Qiaotou coal, and 5Eu reduced which indicated that the element Eu depleted. The characteristics of REE was controlled by the metamorphic grade of coal. And REE were mainly absorbed in clay minerals in Beipiao coal samples, while in Jianxin and Qiaotou coal mines, REE were primarily related to clay mineral and pyrite. The variation of trace elements in vertical direction of coal seams was studied, and the results showed that different trace elements differed greatly. The correlation between trace elements and ash were determined. Four major trace elements (aluminium-silicates, sulphide, carbonate and phosphate) accounted for the occurrence and distribution of most elements studied were determined. Coal samples were separated by density fraction, which showed that Cr, Cu, Mo and Pb were closely related to inorganic matters mainly distributed in P >2.6 and dropped remarkably in the density fractions P <2.3 . The occurrences of Co, Cr, Ni, As, Se, Mo, U were studied directly and quantitatively using sequential chemical extract with six steps, which showed that Co. Ni, Mo and U were mainly in the form of mineral, and As, Se chiefly in the form of organic state, while Cr mostly in the form of organic state and mineral. Major mineral phases presented in the Beipiao coal were Kaolinite, illite, quartz, calcite, and small amount of siderite, barite. While major mineral phases in Jianxin and Qiaotou coal were pyrite, kaolinite, and small amount of marcasite, rutile, sphalerite. This is the first time that the chromite in the coal was discovered in China, which indicates that Cr occurrence appeared in the form of chromite. The ratio of Sr/Ba, Sr/Ca and V/Ni in Beipiao coal mine under inland limnetic is smaller than that of in Jianxin and Qiaotou coal mines under paralic swamp. The ratio of K/Na and Th/U of Beipiao coal mine is higher than that of Jianxin and Qiaotou coal mine, which proved that Beipiao coal was not affected by sea water and Jianxin and Qiaotou coal were affected by sea water. Trace elements such as Cr, Ni, Mo in minerals were analyzed by SEM-EDS. The factors controlling the enrichment of trace elements can be divided into syngenetic stage factors and epigenetic stage factors.

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Simultaneous Determination of Ba, Cr, Mo (Group 1), and Cu, Fe, Ni, and Pb (Group 2) in Commercial Fuel Ethanol by Graphite Furnace AAS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mobilidade de oxigênio intersticial em SM'BA IND.2' C IND.U 'IND.3' 'O IND. 7-'delta' medida através de espectroscopia mecânica

Pós-graduação em Ciência e Tecnologia de Materiais - FC