Microelectrode array in mixed alkanethiol self-assembled monolayers: Electrochemical studies

We report an efficient alternative to obtain recessed microelectrodes device on gold electrode surface, in which mixed self-assembled monolayer of long and short carbon alkanethiol chains was used for this purpose. Development of the modified electrodes included the chemical adsorption of 11-mercaptoundecanoic acid and 2-mercaptoethanol solution, as well as their mixtures, on gold surface, resulting in the final mixed self-assembled monolayer configuration. For comparison, the electrochemical performance of self-assembled monolayer of 11-mercaptoundecanoic acid. 3-mercaptopropionic acid, 4-mercapto-1-butanol and 6-mercapto-1-hexanol modified electrodes was also investigated. It was verified that, in the mixed self-assembled monolayer, the 11-mercaptoundecanoic acid acts as a barrier for electron transfer while the short alkanethiol chair is deposited in an island-like shape through which electrons can be freely transferred to ions in solution, allowing electrochemical reactions to occur. The performance of the modified electrodes toward microelectrode behavior was investigated via cyclic voltammetry and electrochemical impedance spectroscopy measurements using [Fe(CN)(6)](3-/4-) redox couple as a probe. In this case, sigmoidal voltammetric responses were obtained, very similar to those observed for microelectrodes. Such behavior reinforces the proposition of electron transfer through the short alkanethiol chain layer and surface blockage by the long chain one. Electrochemical impedance results allowed calculated the mean radius value of each microelectrode disks of 3.8 mu m with about 22 mu m interval between them. The microelectrode environment provided by the mixed self-assembled monolayer can be conveniently used to provide an efficient catalytic conversion in biosensing applications. (C) 2012 Elsevier Ltd. All rights reserved.

Carbon nanotubes modified with antimony nanoparticles: A novel material for electrochemical sensing

In this study, a novel material for the electrochemical determination of bisphenol A using a nanocomposite based on multi-walled carbon nanotubes modified with antimony nanoparticles has been investigated. The morphology, structure, and electrochemical performance of the nanocomposite electrodes were characterised by field emission gun scanning electron microscopy, energy-dispersive X-ray spectroscopy, and cyclic voltammetry. A scan rate study and electrochemical impedance spectroscopy showed that the bisphenol A oxidation product is adsorbed on nanocomposite electrode surface. Differential pulse voltammetry in phosphate buffer solution at pH 6, allowed the development of a method to determine bisphenol A levels in the range of 0.5-5.0 mu mol L-1, with a detection limit of 5.24 nmol L-1 (1.19 mu g L-1). (C) 2012 Elsevier Ltd. All rights reserved.

Enzymatic Solid-Phase Reactor Based on Silica Organofunctionalized with p-Phenylenediamine for Electrochemical Detection of Phenolic Compounds

A new biomaterial, based on silica organofunctionalized with p-phenylenediamine (p-PDA) and the enzyme peroxidase, was used in the development of an enzymatic solid-phase reactor. The analytical techniques used in the characterization showed that the organic ligand was incorporated into the silica matrix. Thus, the silica modified with p-PDA allowed the incorporation of peroxidase by the electrostatic interaction between the carboxylic groups present in the enzyme molecules and the amino groups attached to the silica. The enzymatic solid-phase reactor was used for chemical oxidation of phenols in 1, 4-benzoquinone that was then detected by chronoamperometry. The system allowed the analysis of hydroquinone with a detection limit of 83.6 nmol L-1. Thus, the new material has potential in the determination of phenolic compounds river water samples.

Evaluation of the detection and quantification limits in electroanalysis using two popular methods: application in the case study of paraquat determination

In this work, the reduction reaction of paraquat herbicide was used to obtain analytical signals using electrochemical techniques of differential pulse voltammetry, square wave voltammetry and multiple square wave voltammetry. Analytes were prepared with laboratory purified water and natural water samples (from Mogi-Guacu River, SP). The electrochemical techniques were applied to 1.0 mol L-1 Na2SO4 solutions, at pH 5.5, and containing different concentrations of paraquat, in the range of 1 to 10 mu mol L-1, using a gold ultramicroelectrode. 5 replicate experiments were conducted and in each the mean value for peak currents obtained -0.70 V vs. Ag/AgCl yielded excellent linear relationships with pesticide concentrations. The slope values for the calibration plots (method sensitivity) were 4.06 x 10(-3), 1.07 x 10(-2) and 2.95 x 10(-2) A mol(-1) L for purified water by differential pulse voltammetry, square wave voltammetry and multiple square wave voltammetry, respectively. For river water samples, the slope values were 2.60 x 10(-3), 1.06 x 10(-2) and 3.35 x 10(-2) A mol(-1) L, respectively, showing a small interference from the natural matrix components in paraquat determinations. The detection limits for paraquat determinations were calculated by two distinct methodologies, i.e., as proposed by IUPAC and a statistical method. The values obtained with multiple square waves voltammetry were 0.002 and 0.12 mu mol L-1, respectively, for pure water electrolytes. The detection limit from IUPAC recommendations, when inserted in the calibration curve equation, an analytical signal (oxidation current) is smaller than the one experimentally observed for the blank solution under the same experimental conditions. This is inconsistent with the definition of detection limit, thus the IUPAC methodology requires further discussion. The same conclusion can be drawn by the analyses of detection limits obtained with the other techniques studied.

Nanogravimetric study of lead underpotential deposition on selenium thin films as a semiconductor alloy formation procedure

An electrochemical quartz crystal microbalance Au electrode modified with a Se thin film was used to investigate the electrochemical behavior of lead ad-atoms using underpotential deposition (UPD) conditions. A specific quasi-reversible process was observed during the reduction of Pb2+ on Se thin films in perchloric acid media. The charge density of Pb ad-atoms on Se thin film (46.86 mu C cm(-2)) suggests a recovery of 0.1 monolayers, which is in good agreement with EQCM data. The Se thin film can be successfully alloyed with Pb atoms that are deposited by chronoamperometry using time intervals large enough to allow for diffusion toward the inner Se phase. Linear sweep voltammetry combined with EQCM in perchloric acid was used to characterize the amount of Pb absorbed in the Se thin film. These findings offer a new strategy for alloy formation in semiconductor films using UPD as an effective tool to quantify the exact amount of the incorporated metal.

Glass/PDMS hybrid microfluidic device integrating vertically aligned SWCNTs to ultrasensitive electrochemical determinations

This communication reports a promising platform for rapid, simple, direct, and ultrasensitive determination of serotonin. The method is related to integration of vertically aligned single-walled carbon nanotubes (SWCNTs) in electrochemical microfluidic devices. The required microfabrication protocol is simple and fast. In addition, the nanomaterial influenced remarkably the obtained limit-of-detection (LOD) values. Our system achieved a LOD of 0.2 nmol L-1 for serotonin, to the best of our knowledge one of the lowest values reported in the literature.

The 3C cooperation model applied to the classical requirement analysis

Aspects related to the users' cooperative work are not considered in the traditional approach of software engineering, since the user is viewed independently of his/her workplace environment or group, with the individual model generalized to the study of collective behavior of all users. This work proposes a process for software requirements to address issues involving cooperative work in information systems that provide distributed coordination in the users' actions and the communication among them occurs indirectly through the data entered while using the software. To achieve this goal, this research uses ergonomics, the 3C cooperation model, awareness and software engineering concepts. Action-research is used as a research methodology applied in three cycles during the development of a corporate workflow system in a technological research company. This article discusses the third cycle, which corresponds to the process that deals with the refinement of the cooperative work requirements with the software in actual use in the workplace, where the inclusion of a computer system changes the users' workplace, from the face to face interaction to the interaction mediated by the software. The results showed that the highest degree of users' awareness about their activities and other system users contribute to a decrease in their errors and in the inappropriate use of the system.

Una arquitectura cognitiva para agentes sociales en entornos cooperativos complejos

La creciente demanda de sistemas informáticos abiertos y con gran interacción entre cada una de sus partes, incluyendo también usuarios humanos, ha hecho aumentar el interés y el uso de sistemas donde múltiples agentes interactúan para alcanzar sus metas. Las interacciones pueden tener el objetivo de mejorar la eficiencia de los agentes aumentando el rendimiento del sistema, pero también pueden estar pensadas para posibilitar que nuevas metas —que un agente no sería capaz de alcanzar de forma individual— puedan ser conseguidas cuando varios de ellos trabajan en conjunto. En paralelo a este crecimiento, con el avance en el campo de investigación de los agentes software, y también por los recientes descubrimientos acerca de la importancia de determinados aspectos cognitivos en el proceso de toma de decisión y resolución de problemas, la idea de la inclusión de influencias cognitivas en el modelo de razonamiento de estos agentes se presenta como una alternativa muy atractiva para mejorar su comportamiento en general, y especialmente el social, en comparación con sistemas que no consideran estos aspectos en el diseño de soluciones para entornos complejos. Pensando en proveer una solución que pueda contribuir, de alguna manera, al avance en estas dos áreas, el presente trabajo presenta una arquitectura cognitiva para modelar agentes con habilidades sociales partiendo de una arquitectura base, que proporciona los comportamientos cognitivos reactivos y deliberativos de los agentes. La arquitectura ampliada debe aportar agentes cognitivos sociales capaces de afrontar mejor el aumento de la complejidad de los sistemas y presentar comportamientos más coherentes, explicables y más creíbles durante sus interacciones con los demás. Dos teorías sociológicas proponen los componentes y estructuras que han inspirado el desarrollo de esta arquitectura social, aportando mecanismos que permiten obtener una coordinación descentralizada en un entorno social dinámico y rico en interacciones: la Teoría de Roles y la Teoría de la Actividad. Los resultados alcanzados con el desarrollo de esta arquitectura dejan traslucir su capacidad para modelar agentes sociales cognitivos capaces de interactuar de forma personalizada entre ellos para la satisfacción de metas. Los nuevos componentes y mecanismos de la arquitectura han permitido conjugar y enriquecer los comportamientos reactivo-deliberativos de la arquitectura base con comportamientos sociales elaborados.

Análise de segurança de veículo ferroviário de carga em tangente considerando a excitação periódica da via permanente.

Uma ocorrência ferroviária tem danos imprevisíveis, desde um simples atraso do horário do trem enquanto o socorro ferroviário encarrilha o vagão, até prejuízos milionários com grande perda de ativos (material rodante e via permanente) e, em casos extremos, até vidas humanas. Portanto, as ferrovias nacionais sempre buscam maneiras de programar ações que minimizam este risco. Uma das principais ações é estabelecer critérios de manutenção sempre justos. Entretanto, estes critérios geralmente não contemplam de maneira conjunta a dinâmica veicular e a geometria da via permanente. Neste sentido, este trabalho elabora um modelo matemático de um vagão ferroviário de alta capacidade em conjunto com a flexibilidade do suporte da via permanente. O modelo matemático foi validado e considerado satisfatório, a partir da comparação das frequências naturais obtidas no vagão real e na comparação de seu resultado produzido a partir de uma entrada medida com equipamentos de controle de geometria de linha e de medições dinâmicas realizadas por vagão instrumentado. Um método estratégico para análise da segurança do veículo foi sugerida e utilizada mostrando-se capaz de determinar os comprimentos de onda da via permanente que devem ser priorizados na manutenção, bem como na análise da segurança do vagão quando na adoção de restrições de velocidades.