963 resultados para market survey
Resumo:
This study is specifically concerned with the effect of the Enterprise Resource Planning (ERP) on the Business Process Redesign (BPR). Researcher’s experience and the investigation on previous researches imply that BPR and ERP are deeply related to each other and a study to found the mentioned relation further is necessary. In order to elaborate the hypothesis, a case study, in particular Turkish electricity distribution market and the phase of privatization are investigated. Eight companies that have taken part in privatization process and executed BPR serve as cases in this study. During the research, the cases are evaluated through critical success factors on both BPR and ERP. It was seen that combining the ERP Solution features with business processes lead the companies to be successful in ERP and BPR implementation. When the companies’ success and efficiency were compared before and after the ERP implementation, a considerable change was observed in organizational structure. It was spotted that the team composition is important in the success of ERP projects. Additionally, when the ERP is in driver or enabler role, the companies can be considered successful. On the contrary, when the ERP has a neutral role of business processes, the project fails. In conclusion, it can be said that the companies, which have implemented the ERP successfully, have accomplished the goals of the BPR.
Resumo:
Welle Laser is a Brazilian company that manufactures marking and engraving machines mainly for large-scale industry segments providing solutions that help increase productivity. Welle laser has 60% market share in Brazil and decided to go internationally in 2015, mainly to increase revenues and diversify business risks. Welle opened an office in Switzerland and celebrated a contract with a Mexican company to distribute their machines in Mexico. The next step for Welle is expanding its operation to USA. In my project I accessed the viability and reasons to enter the US market, the region where Welle should start its operation, and the best entry mode strategy.
Resumo:
There is a rising demand for local food which traveled only short distances and is marketed directly by the producer. With growing importance of local food also the amount of literature in this field increased. Yet, literature is lacking to examine the challenges and burdens consumers face while trying to purchase local food. Evidence is shown that a gap exists between the intention of consumers who would like to purchase local food and their actual behavior. However, reasons for this gap are only discovered as byproducts of other research objectives. Consequently, this study investigates the specific reasons for the intention-behavior gap of consumers in the local food market. The study makes use of semi-structured face-to-face interviews with rural and urban respondents. The interviews are analyzed by qualitative content analysis based on Elo and Kyngäs (2008). Revealed key drivers for the intention-behavior gap are (1) the lack of awareness where to purchase local food products, (2) the limited reachability of local food producers, (3) the assortment of the local producer in regard to size and composition and (4) the lack in transparency of the prices of local food. Consequently, it is the producers turn to eliminate the revealed barriers by proactively bringing their products closer to the consumer.
Resumo:
From January 19 to February 25, 1997 an entomological survey of the seringais and larger towns along the Acre and Purus rivers was made as part of the project “Revisitando a Amazônia de Carlos Chagas; da Borracha a Biodiversidad”. Eleven anopheline species and 1285 specimens were collected landing on human baits. The four most abundant species were Anopheles albitarsis s.l. (n=778), A. darlingi (n=359), A. rangeli (n=69) and A. oswaldoi (n=60). A total of 252 larvae were collected of which 10 anopheline species were identified. The most abundant species collected were A. albitarsis s.l. (n=88), A. deaneorum (n=45) and A. triannulatus (n=40). The low numbers of Anopheles collected and the absence of the principal malaria vector A. darlingi at the seringais sites suggests that they arc not high risk malarious areas. Other Diptera collected were Culex sp., Mansonia titillans, Mansonia pseudotitillans, Psorophora ciliata, Psorophora sp., Coquillettidia (Rhynchotaenia) sp., Simulium amazonicum and S. sanguineum.
Resumo:
The Our Lady of Conception church is located in village of Monforte (Portugal) and is not in use nowadays. The church presents structural damage and, consequently, a study was carried out. The study involved the survey of the damage, dynamic identification tests under ambient vibration and the numerical analysis. The church is constituted by the central nave, the chancel, the sacristy and the corridor to access the pulpit. The masonry walls present different thickness, namely 0.65 m in the chancel, 0.70 m in the sacristy, 0.92 in the central nave and 0.65 m in the corridor. The masonry walls present 8 buttresses with different dimensions. The total longitudinal and transversal dimensions of the church are equal to 21.10 m and 14.26 m, respectively. The survey of the damage showed that, in general, the masonry walls are in good conditions, with exception of the transversal walls of the nave, which present severe cracks. The arches of the vault presents also severe cracks along the central nave. As consequence, the infiltrations have increased the degradation of the vault and paintings. Furthermore, the foundations present settlements in the Southwest direction. The dynamic identification test were carried out under the action of ambient excitation of the wind and using 12 piezoelectric accelerometers of high sensitivity. The dynamic identification tests allowed to estimate the dynamic properties of the church, namely frequencies, mode shapes and damping ratios. A FEM numerical model was prepared and calibrated, based on the first four experimental modes estimated in the dynamic identification tests. The average error between the experimental and numerical frequencies of the first four modes is equal to 5%. After calibration of the numerical model, pushover analyses with a load pattern proportional to the mass, in the transversal and longitudinal direction of the church, were performed. The results of the analysis numerical allow to conclude that the most vulnerable direction of the church is in the transversal one and the maximum load factor is equal to 0.35.
Resumo:
This paper aims to describe the Sequential Excavation Method, used for excava-tion in underground works, as well as the related risks and preventive measures. This method has characteristics that differentiate it from other tunnelling techniques: it uses a larger number of workers and equipment; it has a high concurrency of tasks with various workers and equip-ment quite exposed to hazards; and it uses many potentially aggressive chemicals. Firstly, it is given a broad overview of this issue. Afterwards, it will be presented the results of a survey to a sample of experienced technicians, aimed at gauging the relevance of a set of guidelines relat-ing to the design and work phases, applicable to the domestic market and prepared following technical visits to works abroad.
Resumo:
Dissertação de mestrado em Finanças
Resumo:
Tese de doutoramento em Estudos da Criança (área de especialização em Formação de Professores).
Resumo:
We provide a comparative analysis of how short-run variations in carbon and energy prices relate to each other in the emerging greenhouse gas market in California (Western Climate Initiative [WCI], and the European Union Emission Trading Scheme [EU ETS]). We characterize the relationship between carbon, gas, coal, electricity and gasoline prices and an indicator for economic activity, and present a first analysis of carbon prices in the WCI. We also provide a comparative analysis of the structures of the two markets. We estimate a vector autoregressive model and the impulse--response functions. Our main findings show a positive impact from a carbon shock toward electricity, in both markets, but larger in the WCI electricity price, indicating more efficiency. We propose that the widening of carbon market sectors, namely fuels transport and electricity imports, may contribute to this result. To conclude, the research shows significant and coherent relations between variables in WCI, which demonstrate some degree of success for a first year in operation. Reversely, the EU ETS should complete its intended market reform, to allow for more impact of the carbon price. Finally, in both markets, there is no evidence of carbon pricing depleting economic activity.
Resumo:
Dissertação de mestrado em Engenharia Industrial
Resumo:
ABSTRACT The northern Brazilian state of Mato Grosso is considered an important biogeographical region, but has many sampling gaps. Apart from the well-documented non volant mammal community in the region, the bat fauna still poorly recorded. The aim of this study was to record the bat species of Juruena National Park, northern Mato Grosso, Brazil. Nineteen sites were sampled using mist-nets placed at ground level and near potential bat roosts. We collected 115 individuals belonging to 35 species and five families, which increased the number of species known for Mato Grosso´s Amazon from 86 to 91. The five new records were: Peropteryx kappleri, Peropteryx leucoptera, Lonchorhina inusitata, Tonatia saurophila, and Artibeus concolor. Our results pointed out the necessity of more studies in order to better estimate the bat diversity in northern Mato Grosso.
Resumo:
Tese de Doutoramento em Ciências da Comunicação - Especialidade em Comunicação Estratégica e Organizacional
Resumo:
Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação
Resumo:
Dissertação de mestrado em Design e Comunicação de Moda
Resumo:
The paper reflects the work of COST Action TU1403 Workgroup 3/Task group 1. The aim is to identify research needs from a review of the state of the art of three aspects related to adaptive façade systems: (1) dynamic performance requirements; (2) façade design under stochastic boundary conditions and (3) experiences with adaptive façade systems and market needs.