Determination of carbaryl in tomato ""in natura"" using an amperometric biosensor based on the inhibition of acetylcholinesterase activity

This work reports the utilization of two methodologies for carbaryl determination in tomatoes. The measurements were carried out using an amperometric biosensor technique based on the inhibition of acetylcholinesterase activity due to carbaryl adsorption and a HPLC procedure. The electrochemical experiments were performed in 0.1 mol L-1 phosphate buffer solutions at pH 7.4 with an incubation time of 8 min. The analytical curve obtained in pure solutions showed excellent linearity in the 5.0 x 10(-5) to 75 x 10(-5) mol L-1 range, with the limit of detection at 0.4 x 10(-3) gL(-1). The application of such a methodology in tomato samples involved solely liquidising the samples, which were spiked with 6.0 x 10(-6) and 5.0 x 10(-5) mol L-1 carbaryl. Recovery in such samples presented values of 99.0 and 92.4%, respectively. In order to obtain a comparison, HPLC experiments were also conducted under similar conditions. However, the tomato samples have to be manipulated by an extraction procedure (MSPD), which yielded much lower recovery values (78.3 and 84.8%, respectively). On the other hand, the detection limit obtained was much lower than that for the biosensor, i.e., 3.2 x 10(-6) g L-1. Finally, the biosensor methodology was employed to analyze carbaryl directly inside the tomato, without any previous manipulation. In this case, the biosensor was immersed in the tomato pulp, which had previously been spiked with the pesticide for 8 min, removed and inserted in the electrochemical cell. A recovery of 83.4% was obtained, showing very low interference of the matrix constituents. (C) 2007 Elsevier B.V. All rights reserved.

Agro-Based Biocomposites for Industrial Applications

Leaf fibers are fibers that run lengthwise through the leaves of most monocotyledonous plants such as pineapple, banana, etc. Pineapple (Ananas comosus) and Banana (Musa indica) are emerging fiber having a very large potential to be used for composite materials. Over 150,000 ha of pineapple and over 100,000 ha of banana plantations are available in Brazil for the fruit production and enormous amount of agricultural waste is produced. This residual waste represents one of the single largest sources of cellulose fibers available at almost no cost. The potential consumers for this fiber are pulp and paper, chemical feedstock, textiles and composites for the automotive, furniture and civil construction industry.

Evaluation of the antioxidant activity of passion fruit (Passiflora edulis and Passiflora alata) extracts on stimulated neutrophils and myeloperoxidase activity assays

The antioxidant activity of methanol extracts from Passiflora edulis and Passiflora alata pulp, and P. edulis rinds, healthy or infected with the passion fruit woodiness virus (PWV), was investigated using the oxidant activities of the neutrophil and the neutrophil granule enzyme myeloperoxidase (MPO), both playing key roles in inflammation. The reactive oxygen species produced by stimulated neutrophils were evaluated by lucigenin-enhanced chemiluminescence (CL) and the activity of purified MPO was measured by SIEFED (Specific Immunological Extraction Followed by Enzymatic Detection), a technique for studying the direct interaction of a compound with the enzyme. The rind extracts of P. edulis possessed higher and dose-dependent inhibitory effects on CL response and on the peroxidase activity of MPO than total pulp extracts from both passion fruit species. The quantification of isoorientin in the extracts showed a correlation with their antioxidant activity, suggesting the potential of P. edulis rinds as functional food or as a possible source of natural flavonoids. (C) 2011 Elsevier Ltd. All rights reserved.

Flerskiktat papper : en sammanställning av historia, teknik och forskningsresultat

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard. Now it is also the most common method for making tissue and one paper mill in Austria use it for fine paper. Stratified forming can be categorized as separate forming or simultaneous forming. Separate forming means using several headboxes and sometimes even several wires. Simultaneous forming means using only one stratified headbox. This method has many advantages over separate forming, inter alia improved economy, quality, wood exchange and higher runability of the paper machine. Several experiments have been done with simultaneous forming of different fibres by placing a fibre with high bulk in the middle layer and a smooth fibre on the surface layers. The results has shown that by using this method both the bending stiffness and surface properties are improved, or a lower grammage paper is obtained with maintaining quality. Simultaneous forming can also be used to stratify fillers in layers where they are most efficient. In that way both paper quality and economy is improved. Simultaneous forming is also used for fractionated pulp. Fractionation means separating springwood fibre from summerwood fibre, and placing them in separate layers. Research results of fractionated pulp show about the same result as simultaneous forming of different fibres.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Tratamento de perfurações radiculares com pasta de hidróxido de cálcio e iodofórmio : influência da aplicação de curativo à base de corticóides; estudo histológico em dentes de cão

Esta pesquisa teve como proposta avaliar histopatologicamente,os efeitos do tratamento de perfurações radiculares, empregando medicamentos à base de corticóide e antibiótico como curativo, seu posterior preenchimento com uma pasta aquosa de hidróxido de cálcio e iodofórmio e, também, a utilização dessa pasta durante todo o período experimental. Para tanto, foram utilizados os segundos e terceiros pré-molares superiores e os terceiros e quartos inferiores de 6 cães adultos jovens. Nestes dentes, sob isolamento absoluto do campo operatório com dique de borracha, efetuou-se a obturação dos canais radiculares, e após a limpeza da câmara pulpar, procedeu-se a perfuração radicular na raiz mesial para a região interradicular e lateralmente disposta à furca. Como curativo foram utilizados o Rifocort e o Otosporin, que permaneciam por 7 dias no trajeto perfurado e em contato com os tecidos periodontais da região. Passado esse período, o curativo era substituído por uma pasta aquosa de hidróxido de cálcio e iodofórmio e todos os dentes eram radiografados antes e depois da substituição do material. Decorridos 90 dias, os animais foram sacrificados por meio de perfusão e as peças removidas, radiografadas e preparadas para se obter cortes histológicos, os quais foram corados pela hematoxilina e eosina e pelo tricrômico de Masson. Pelos resultados obtidos neste trabalho, é válido concluir que: a) as perfurações seladas imediatamente com a pasta aquosa de hidróxido de cálcio e iodofórmio apresentaram melhores resultados no exame histológico, onde ficaram evidenciadas menor quantidade do processo inflamatório e maior hiper-plasia de cemento; b) não houve diferença significante entre as perfurações tratadas com os medicamentos Rifocort e Otosporin; c) os dentes cujas perfurações permaneceram sem nenhum tratamento durante 7 dias, exibiram uma resposta menos favorável e sem evidência de reparação na área perfurada; d) as imagens radiográficas, no que se refere á extensão de destruição do tecido ósseo alveolar, foram compatfveis com os quadros histológicos, não havendo evidências, porém, da neoformação do tecido cementário.

Transformação tecnológica e estratégia competitiva: um estudo multicaso

O objetivo principal desta pesquisa é investigar como a inovação tecnológica ajuda a moldar estratégias, para obtenção de vantagens competitivas sustentáveis, em um contexto de globalização. Com base em extensa revisão bibliográfica, compreendendo competitividade, tecnologia, estratégia e alianças estratégicas é explorado o fenômeno da inovação tecnológica e sua inserção na gestão estratégica de quatro empresas dos setores de celulose, siderurgia, químico-farmacêutico e de aplicações médicas da energia nuclear. Inicialmente, o conceito de competitividade e a estrutura industrial brasileira são analisados a luz de três modelos distintos. Também é realizada uma avaliação do conceito de competências essenciais das organizações e arquiteturas estratégicas. Posteriormente é avaliada a relação entre vantagem competitiva e inovação tecnológica e as dimensões estratégicas da tecnologia. Finalmente são descritas as escolas de pensamento estratégico e as relações entre alianças estratégicas e transferência de tecnologia. São analisadas as características estruturais e competitivas de cada um dos setores estudados, bem como apresentados perfis das empresas representantes de cada setor. Os dados de cada uma das empresas foram obtidos por meio de entrevistas semi-estruturadas. Os resultados são analisados individualmente e posteriormente consolidados. Os resultados do estudo permitiram identificar que a variável tecnológica é inserida na gestão estratégica das empresas em três níveis distintos. O primeiro nível é o de análise; o segundo é o de decisões estratégicas e finalmente o terceiro nível é o de implementação estratégica. Também foram identificadas as fontes de tecnologia normalmente utilizadas pelas organizações objeto do estudo. Por fim, é sugerido que o modelo de estrutura industrial de Porter pode receber contribuições no sentido de incorporar as estratégias cooperativas das empresas por meio de indicadores de cooperatividade.

Evolução setorial e trajetórias tecnológicas em nível de empresas na indústria de celulose e papel no Brasil (1970 - 2004): contexto da política de substituição de importações à competição globalizada

Accordingly, a variety of firms's technological capabilities studies, the literature recently is still lacking about the dynamic of sector evolution and technological development in inter-firm and their implication for technical and economical financial performance. More lacking is the research catching up the evolution of industrial sectors after the institutional reforms in the 90. For that, the focus of the dissertation is to analyze the main of the evolution of the pulp and paper industry from 1970 to 2004, using as reference points the import-substitution policy and the economic deregulation of the 1990s. Futhermore, the work tries to evaluate how such changes at industry level have been perceived from a firm point of view in terms of accumulation of technological capabilities and improvement of economic financial performance. This linkage is tested and examined in the following firms: Aracruz (Barra do Riacho establishment ), Klabin (Monte Alegre establishment) e Votorantim Celulose e Papel ¿ VCP (Jacareí establishment), defining the same time period of sectoral level. As far as the industry level study is concerned, it is based on the average rate of annual growth of some selected variables, given that the technological capabilities test is performed according to the methodology already existing in the literature, but properly adapted to the pulp and paper case. Similarly, the analysis regarding the improvement of the economic financial performance is based on a set of industry specific indicators. Hence, the work is built upon multiple case studies, taking into account both the qualitative and quantitative evidence, i.e. interviews, direct observations, as well as firm reports. Finally, it is worth emphasizing as the analysis of the changes in the sector, in conjunction with the above mentioned methodology used to measure the technological capabilities in the context of an evolving industrial regime, is still lacking in emerging economies as well as in Brazil. According to the empirical evidence, the reforms of the 1990s had a positive impact on the industrial development, from both the national and international viewpoint. Such a transformation was evident at firm level in terms of accumulation of technological capabilities and improvement of economic financial indicators. Indeed, the results show that the speed of accumulation of technological capabilities within the firms influences positively the performance indicators. On the other hand, these are also related to external factors, such as the macroeconomic conditions, which as such have not been considered in details.

Como o marketing verde interfere na imagem da marca da indústria de celulose: o estudo de caso da aracruz celulose

The purpose of this work, is to analyze the principles underlying the pulp and paper industry, here portrayed by Aracruz Celulose S A, in the marketing standpoint, as far as it concerns being in harmony with nature and adapting its relations with the stakeholders, notably regarding the community of the State of Espírito Santo. As they form, indeed, part of the same discussion, the goal is to proceed with a detailed examination of the major aspects and conditions involved, based in its corporate communications, leading to the construction of a positive corporate brand. The results found throughout this study show that despite Aracruz and the communities¿ different goals, they converge regarding their interests towards the best practices in social and environmental practices, and a more objective communication. Industry and community can work together for a same benefit: the best relations of man towards Nature, and of man towards man. The examples here stated will endorse our perception as well as serve to evaluate the results of the measures adopted in this relationship. It could be verified how internal and external aspects of the organization influence the company¿s reputation, leading to important changes in attitude and in the production process. Pressures from stakeholders have contributed largely in helping Aracruz become more conscious of the important role it plays in the social-environmental universe of the State of Espírito Santo. The assessment of leading the process of communications within in-depth transparency have signaled that, despite a closer approach with its stakeholders, Aracruz still needs to fulfill an existing gap: an excellent rapport between the company and the communities where it influences still needs to be pursued, especially regarding communicating its activities.

Trajetórias De Acumulação De Capacidades Inovadoras, Mecanismos De Aprendizagem E Fatores Organizacionais Relativos A Atividades Em Gestão De Projetos: Estudo De Caso Comparativo Inter-Empresarial Na Indústria De Bens De Capital E De Celulose E Papel No Brasil

Over the last 40 years there has been a profusion of studies about the ccumulation of technological capacities in firms from developing economies. However, there remain few studies that examine, on a combined basis, the relationship among: the trajectories of technological capacities accumulation; the underlying learning mechanisms; and, the implications of organizational factors for these two variables. Still scarcer are the studies that examine the relationship among these variables along time and based on a comparative case study. This dissertation examines the relationship among the trajectory of accumulation of innovative capacities in complex project management, the learning mechanisms underlying these technological capacities and the intra-organizational factors that influence these learning echanisms. That set of relationships is examined through a comparative and a long-term (1988-2008) case study in a capital goods firm (for the pulp and paper industry) and a pulp mill in Brazil. Based on first-hand quantitative and qualitative empiric evidence, gathered through extensive field research, this dissertation found: 1. Both firms accumulated innovative capacity in project management at the international frontier level (Level 6). However, there was variability between the firms in terms of the nature and speed of accumulation of those capacities. It was also observed that, at this level of innovation, the innovative capacities of both firms are not confined to their organizational boundaries, but they are distributed beyond their boundaries. 2. So that these companies could accumulate those levels of innovative capacities it was necessary to manage several learning mechanisms: leveraging of external knowledge and its internalization in terms of internal apacities of the firm. In other words, as the companies accumulated more innovative levels of capacities for project management, it was necessary to manage different cycles of technological learning. 3. Further, the relationship between the ccumulation of technological capacities and learning was affected positively by intra-organizational factors, such as 'authority disposition', 'mutability of work roles' and 'intensity of internal crises', and negatively by the factor 'singularity of goals'. This dissertation revealed divergent results between firms in two of the four factors studied. These results contribute to advance our understanding of the complexity and variability involved in the process of accumulation of innovative capacities in firms from developing economies. This highlights the growing importance of the organizational and the human resource dimensions of innovation and technological capacity as the company approaches the international frontier. The results suggest to managers that: (i) the good performance in project management in the two firms studied did not occur simply as a result of the pulp and paper Brazilian industry growth, rather as a result of the deliberate construction and accumulation of the capacities through an intensive and coordinated cyclical process of technological learning, (ii) to develop innovative capabilities in project management, besides looking for learning mechanisms they should also look at the organizational factors that influence the learning mechanisms directly, (iii) performance of pulp mill¿s projects is better when projects are implemented together with technology suppliers than when performed only by the mill. This dissertation concludes that capital goods firms have been having a fundamental role for the innovative capabilities accumulation in project management of pulp mills in Brazil (and vice-versa) for a long time. This contradicts some authors' propositions that affirm that: a) equipment suppliers for the pulp and paper industry have been creating little, if any, development of processes or engineering projects in Brazil; b) firms in the pulp and paper industry have little capacity for machinery and equipments projects only taking place in few technological activities, being internal or external to the firm. Finally, some studies are proposed for future research.

Acumulação de competências tecnológicas e os processos subjacentes de aprendizagem na indústria de bens de capital: O caso KVAERNER PULPING no Brasil

This dissertation is concerned with the implications of the learning processes for the technological capability accumulation at the firm level. This relationship was examined in Kvaerner Pulping over the period from 1980 to 2000. The firm is located in Curitiba/PR and supplies equipment and complete plants (capital goods) for pulp mills. In other words, based on an individual case study, this dissertation examines how the learning processes influence the building and accumulation of technological capability. The accumulation of technological capabilities is crucial for the survival and the competitive performance of the firms. An analytical framework already available in the literature was used to describe the paths (way and speed) of technological capability accumulation in the firm studied. However, the framework was adapted specifically for the capital goods industry for the pulp & paper sector. The paths of technological capability accumulation are analysed for three different technological functions: ¿engineering activities and project management¿, ¿operational processes and practices¿ and ¿process equipment¿. The learning mechanisms were examined in the light of four key features: variety, intensity, functioning and interaction. During the 1980s and 1990s the firm accumulated different levels of technological capability in the technological functions studied. It was only when the firm started to coordinate systematically the efforts to acquire and convert the knowledge from the individual to the organizational level, at the mid 1990s, that the accumulation of technological capability was accelerated. By the end of this decade the firm was able to accumulate innovative capabilities in all the functions analysed. Similarly to previous studies that investigated other types of firms, the conclusion of this dissertation suggests that the way and rate by which the firm accumulates technological capability can be explained by the learning process and its key features over time.

Uma análise da concorrência no setor brasileiro de celulose

Este trabalho analisa o setor brasileiro de celulose e tenta responder a duas questões principais: a abrangência do mercado relevante e a existência de poder de mercado das empresas que atuam neste setor. A dimensão produto do mercado relevante foi definida a partir de dados qualitativos. Devido à indisponibilidade de dados para uma análise qualitativa mais apurada, a opção foi pela celulose de fibra curta de eucalipto, produto mais importante do setor, tanto pela posição brasileira em tecnologia como pela pauta de exportações. Já quanto à dimensão geográfica, o procedimento realizado baseou-se em Forni (2004) que utiliza testes de raiz unitária para a definição do mercado. Concluiu-se que, com os dados disponíveis, o mercado deste produto pode ser considerado como internacional, não somente pelo resultado do teste como também pelo modo de funcionamento deste mercado. Definido o mercado de produto e geográfico, realizou-se um teste de poder de mercado, pois neste nicho, a Aracruz é líder mundial. Tal teste foi realizado com base na demanda residual descrita por Mayo, Kaserman e Kahai (1996) e estimado segundo Motta (2004). Concluiu-se que, apesar de a Aracruz possuir um elevado market share no setor, ela não possui poder de mercado.

Análise da dentina de dentes decíduos submetidos ao capeamento pulpar indireto

O objetivo do estudo foi avaliar as características da dentina cariada remanescente de molares decíduos quanto à coloração, consistência e microdureza, após um período médio de 3 anos e 8 meses da realização do capeamento pulpar indireto. O estudo clínico constou de 27 dentes que apresentavam lesões cariosas ativas com expressão radiográfica em metade interna de dentina. Aleatoriamente, foi realizado o capeamento pulpar indireto e utilizado como material capeador o hidróxido de cálcio (HC) e o cimento de ionômero de vidro resinoso modificado (CIVRM). As crianças foram acompanhadas através de exames clínicos e radiográficos, e ao longo de um período médio de 3 anos e 8 meses, observou-se um índice de sucesso de 89% para o grupo do HC e de 93% para o CIVRM, não havendo diferença estatisticamente significante entre os dois grupos (p=0,62). Os dentes considerados como sucesso no estudo clínico foram agrupados em um único grupo (grupo teste), que constou de 13 dentes que sofreram esfoliação natural ou exodontia por motivos ortodônticos. Além disso, foram selecionados 15 molares decíduos hígidos (grupo controle positivo) e 15, portadores de lesões cariosas ativas em metade interna de dentina (grupo controle negativo). As amostras do grupo teste tiveram suas respectivas restaurações removidas, a profundidade medida e a dentina remanescente avaliada por um operador calibrado, seguindo critérios descritivos, quanto à consistência e a coloração. Nos dentes do grupo controle positivo, foram realizados preparos cavitários oclusais em até 4 mm de profundidade, enquanto que, no grupo controle negativo, o mesmo operador do estudo clínico realizou a remoção parcial de tecido cariado in vitro. A partir daí, todos os dentes foram preparados para análise de microdureza, que foi realizada por um examinador calibrado, que empregou o princípio de cegamento. Na análise da consistência, todos os dentes do grupo teste (n=13) apresentaram-se endurecidos, enquanto que 9, apresentaram coloração amarela-clara (8 do CIVRM e 1 do HC) e 4, castanho-escura (1 do CIVRM e 3 do HC). Para o teste de microdureza no grupo teste, obteve-se uma média KHN de 40,81 (±16,28) MPa, enquanto que nos grupos controles positivo e negativo, foram alcançados valores médios de 62,73 (±11,24) MPa e 19,15 (±6,99) MPa, respectivamente. A análise estatística mediante o teste ANOVA indicou que houve diferença significativa entre os 3 grupos. Foi constatada a remineralização da dentina de dentes decíduos em que foi realizada a técnica do capeamento pulpar indireto após um período médio de 3 anos e 8 meses, através de critérios clínico (consistência) e laboratorial (análise da microdureza).

Comportamento de células pulpares humanas expostas ao TGFβ1 a ao aFGF em cultura

O propósito do presente estudo foi avaliar o comportamento de células pulpares humanas expostas ao TGFβ1 e ao aFGF, em cultura, nas seguintes concentrações: TGFβ1 a 1ng/mL, TGFβ1 a 5ng/mL, TGFβ1 a 1ng/mL + aFGF a 5ng/mL, TGFβ1 a 5ng/mL + aFGF a 5ng/mL e aFGF a 5ng/mL. Foi avaliada a morfologia celular, a atividade da fosfatase alcalina, através de ensaio com pNPP como substrato e a expressão das proteínas osteocalcina, sialoproteína óssea e sialofosfoproteína de dentina, através de RT-PCR. Após quatro dias, verificou-se que a média do número de nucléolos no grupo tratado com TGFβ1 a 1ng/mL foi significativamente maior que no grupo tratado com aFGF a 5ng/mL. A média da atividade da fosfatase alcalina no grupo tratado com TGFβ1 a 1ng/mL foi significativamente maior que no grupo tratado com TGFβ1 a 5ng/mL + aFGF a 5ng/mL. Foi observada a expressão de osteocalcina em todas as células pulpares humanas que proliferaram em cultura. Entretanto, no grupo em que foi utilizado o aFGF a 5ng/mL houve diminuição da expressão da osteocalcina. A exposição dos fatores não induziu a expressão de componentes da matriz de dentina tais como BSP e DSPP. Sugere-se que as células expostas ao TGFβ1 1ng/mL foram estimuladas, apresentando uma maior atividade celular e as células expostas ao aFGF 5ng/mL foram inibidas, apresentando uma menor atividade celular.

Influência das principais commodities agropecuárias e de variáveis macroeconômicas sobre os preços da terra agrícola no Brasil

Este trabalho tem como proposta investigar como o preço de terras de uso rural no Brasil é afetado pelos preços e exportações das principais commodities agropecuárias, bem como por variáveis macroeconômicas, como taxa básica de juros, taxa de câmbio, taxa de inflação e disponibilidade de crédito agrícola. Para tal foram consideradas as produções agrícola de algodão, café, cana-de-açúcar (e seus principais produtos açúcar e etanol), milho e soja, a produção pecuária de carne bovina e a produção industrial de celulose de fibra curta com foco em sua principal matéria prima, os plantios reflorestados de eucalipto. Em linha com estudos anteriores, foi encontrada evidência empírica de que o preço da terra possui cointegração com algumas das variáveis agrícolas, pecuárias e florestais citadas, em especial em estados com maior vocação agropecuária e/ou para silvicultura. Quanto às variáveis macroeconômicas, apenas a taxa básica de juros apresentou cointegração com o preço de terras para todos os estados avaliados, taxa de câmbio e disponibilidade de crédito rural não aparecem como variáveis estatisticamente significantes. Conclui-se que, para estados com notável participação na balança comercial brasileira de produtos agrossilvipastoris, é possível obter um modelo de equilibro de longo prazo entre o preço da terra de uso rural e as variáveis destacadas acima, de modo que investidores do setor possam utilizá-lo como ferramenta de projeção no auxílio da tomada de decisão além de avaliar potenciais impactos no valor de seus ativos A inovação do presente estudo está em testar as hipóteses de cointegração para cada um dos estados da federação.