Projeto de estabilidade de um edifício para uma sala elétrica em betão armado e estrutura metálica

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização Estruturas

An experimental investigation of air flow and convective heat transfer in enclosures having large ventilative flow rates

The prediction of convective heat transfer in enclosures under high ventilative flow rates is primarily of interest for building design and simulation purposes. Current models are based on experiments performed forty years ago with flat plates under natural convection conditions.

Technical and Didactical Scenarios of Student-centered Teaching and Learning

In this paper we envision didactical concepts for university education based on self-responsible and project-based learning and outline principles of adequate technical support. We use the scenario technique describing how a fictive student named Anna organizes her studies of informatics at a fictive university from the first days of her studies to make a career for herself.(DIPF/Orig.)

Correlação entre o sinal mecanomiográfico e a escala modificada de Ashworth durante avaliação clínica da espasticidade

Spasticity is a common disorder in people who have upper motor neuron injury. The involvement may occur at different levels. The Modified Ashworth Scale (MAS) is the most used method to measure involvement levels. But it corresponds to a subjective evaluation. Mechanomyography (MMG) is an objective technique that quantifies the muscle vibration during the contraction and stretching events. So, it may assess the level of spasticity accurately. This study aimed to investigate the correlation between spasticity levels determined by MAS with MMG signal in spastic and not spastic muscles. In the experimental protocol, we evaluated 34 members of 22 volunteers, of both genders, with a mean age of 39.91 ± 13.77 years. We evaluated the levels of spasticity by MAS in flexor and extensor muscle groups of the knee and/or elbow, where one muscle group was the agonist and one antagonist. Simultaneously the assessment by the MAS, caught up the MMG signals. We used a custom MMG equipment to register and record the signals, configured in LabView platform. Using the MatLab computer program, it was processed the MMG signals in the time domain (median energy) and spectral domain (median frequency) for the three motion axes: X (transversal), Y (longitudinal) and Z (perpendicular). For bandwidth delimitation, we used a 3rd order Butterworth filter, acting in the range of 5-50 Hz. Statistical tests as Spearman's correlation coefficient, Kruskal-Wallis test and linear correlation test were applied. As results in the time domain, the Kruskal-Wallis test showed differences in median energy (MMGME) between MAS groups. The linear correlation test showed high linear correlation between MAS and MMGME for the agonist muscle as well as for the antagonist group. The largest linear correlation occurred between the MAS and MMG ME for the Z axis of the agonist muscle group (R2 = 0.9557) and the lowest correlation occurred in the X axis, for the antagonist muscle group (R2 = 0.8862). The Spearman correlation test also confirmed high correlation for all axes in the time domain analysis. In the spectral domain, the analysis showed an increase in the median frequency (MMGMF) in MAS’ greater levels. The highest correlation coefficient between MAS and MMGMF signal occurred in the Z axis for the agonist muscle group (R2 = 0.4883), and the lowest value occurred on the Y axis for the antagonist group (R2 = 0.1657). By means of the Spearman correlation test, the highest correlation occurred between the Y axis of the agonist group (0.6951; p <0.001) and the lowest value on the X axis of the antagonist group (0.3592; p <0.001). We conclude that there was a significantly high correlation between the MMGME and MAS in both muscle groups. Also between MMG and MAS occurred a significant correlation, however moderate for the agonist group, and low for the antagonist group. So, the MMGME proved to be more an appropriate descriptor to correlate with the degree of spasticity defined by the MAS.

Avaliação de hábitos de consumo e adequação nutricional de refeições rápidas cuja base é o pão

As rápidas alterações sociais, económicas, culturais e ambientais determinaram mudanças significativas nos estilos de vida e contribuíram para o crescimento e generalização do consumo de alimentos e refeições fora de casa. Portugal acompanha a tendência de aumento do consumo alimentar fora de casa, assim, as refeições fora de casa, que há uns anos eram um acontecimento fortuito, são hoje uma prática habitual das famílias portuguesas, não só durante a semana de trabalho, mas também nos fins-de-semana. As, visitas aos centros comerciais que se tornaram um hábito no nosso país incluem uma paragem nas Praças de Alimentação, espaços de excelência pela diversidade alimentar onde predominam as refeições de fast-food. Porém é fundamental a escolha adequada/equilibrada dos alimentos que se vão consumir. O presente trabalho procurou avaliar os hábitos e percepção dos consumidores de refeições rápidas com base numa ementa específica cujo alimento principal é o pão. Posteriormente e de acordo com as preferências de consumo procedeu-se à avaliação nutricional das escolhas. Neste estudo participaram 150 indivíduos que frequentaram as instalações de um restaurante de comida rápida situada na praça de alimentação de um centro comercial situado em Viseu. Foi aplicado um questionário de autopreenchimento, por nós elaborado dividido em 4 partes: caracterização sociodemográfica; hábitos de consumo dos inquiridos; produtos escolhidos pelos inquiridos; grau de satisfação face aos produtos escolhidos. As análises estatísticas foram efectuadas com recurso ao Programa informático Statistical Package for the Social Sciences - SPSS® for Windows, versão 22. Realizam-se testes de Qui-quadrado com simulação de Monte Carlo, considerando o nível de significância de 0,05. Com base nas escolhas mais frequentes feitas pelos inquiridos procedeu-se à avaliação nutricional dos menus recorrendo ao programa DIAL 1.19 versão 1 e quando não se encontrou informação neste utilizou-se a tabela de composição de alimentos portugueses on line (INSA, 2010). Compararam-se os valores obtidos para o Valor Calórico Total, os macronutrientes, a fibra, o colesterol e o sódio com as Doses Diárias Recomendadas. A amostra era composta por 68,7% mulheres e 31,3% homens, com uma média de idades de 29,9 ± 3 anos e, maioritariamente empregados (64,7%). O grau de instrução da maioria dos inquiridos (54,7%) era o ensino superior. Grande parte da amostra não se considera consumidora habitual de fast-food,referindo ainda efectuar frequentemente uma alimentação equilibrada. Sendo que apenas 5 % frequenta as instalações mais de uma vez por semana. De entre os produtos disponíveis, a preferência fez-se pela sandes e batata-frita, sendo o momento de maior consumo o almoçoA avaliação nutricional das escolhas preferenciais dos inquiridos mostrou que o VCT do menu que inclui água como bebida está dentro dos limites calóricos preconizados para o almoço excepção feita ao menu que inclui sandes quente de frango em pão de orégãos e sandes fria de queijo fresco que se destacam por apresentar um valor inferior ao limite mínimo recomendado. Pelo contrário, a inclusão no menu do refrigerante faz com que haja um aumento do VCT, independentemente da sandes considerada, em 18%. Uma análise detalhada mostra que estas ementas são desequilibradas, apresentando 33,3% delas valores de proteínas superiores à DDR enquanto que os valores de HC e lípidos se encontram maioritariamente dentro dos limites havendo apenas 13,3% das ementas fora desses valores. Relativamente ao aporte de fibra e de sódio 86,7% das ementas aparecem desenquadradas com valores excessivos de sódio e valores de fibra 33% abaixo do limite mínimo recomendado. Tratando-se de um estudo de caso em que apenas se inclui um único restaurante de uma praça de alimentação, que fornece ementas à base de pão (sandes) os resultados são interpretados de forma cautelosa e sem generalização. Podemos no entanto concluir, face aos resultados obtidos a necessidade de redução do teor de sal das ementas. Para além disso parece-nos fundamental, para que o consumidor possa comparar opções alimentares e tomar decisões informadas, a disponibilização da informação nutricional das ementas propostas.

Aplicación de SPEA2 al cálculo de esquemas de dosificación para el tratamiento quimioterapéutico del cáncer

En este trabajo se aborda la aplicación de SPEA2, un método para optimización multiobjetivo, al cálculo de un esquema de dosificación para el tratamiento quimioterapéutico de una masa tumoral; entiéndase por esquema de dosificación la especificación del o de los agentes cito-tóxicos, sus dosis y tiempos en que deben administrarse. El problema de optimización aquí resuelto es uno multiobjetivo, pues el esquema de dosificación a calcularse debe minimizar no solo el tamaño del tumor, sino también la toxicidad remanente al término del tratamiento, su costo, etc. El SPEA2 es un algoritmo genético que aplica el criterio de Pareto; por lo tanto, lo que calcula es una aproximación a la frontera de Pareto, soluciones de entre las cuales el usuario puede escoger la “mejor”. En el proceso de esta investigación se construyó SoT-Q, una herramienta de software que consiste de dos módulos principales: un optimizador para calcular los esquemas de dosificación óptimos, y un simulador para aplicar dichos esquemas a un paciente (simulado) con masa tumoral; el funcionamiento del simulador se basa en un modelo fármaco-dinámico que representa el tumor. El programa SoT-Q podría en el futuro -una vez extensamente probado y depurado- asistir a médicos oncólogos en la toma de decisiones respecto a tratamientos quimioterapéuticos; o podría servir también como ayuda pedagógica en el entrenamiento de nuevos profesionales de la salud. Los resultados obtenidos fueron muy buenos; en todos los casos de prueba utilizados se logró reducir de manera significativa tanto el tamaño del tumor como la toxicidad remanente al término del tratamiento; en algunos casos la reducción fue de tres órdenes de magnitud.

Experiencia de la Escuela de Bibliotecología, Documentación e Información en el Desarrollo de Bases de Datos con el Programa Computacional Microisis Versión 3.0

En el campo bibliotecológico para desarrollar instrumentos de trabajo que nos permitan comunicarnos con las demás unidades y clientes de información, debemos pensar en normalizar nuestros procesos.Normalizar, en el sentido más amplio, significa seguir reglas que hagan un registro uniforme en cualquier lugar del mundo. Esto se logra mediante la aplicación de códigos y normas que han sido aceptadas internacionalmente por los organismos creados para este fin.El valor de la normalización estriba en evitar la duplicación de los esfuerzos de la catalogación en las diferentes unidades de información documental y facilitar el intercambio de datos bibliográficos tan pronto como sea posible. También, cosiste en darle al cliente la posibilidad de localizar la información en un a forma homogénea que obvie las barreras idiomáticas.

Aportaciones de la cirugía guiada por ordenador y navegación en oncología de cabeza y cuello: una revisión bibliográfica sistemática y actualización

Introducción: El objetivo de este trabajo es hacer una revisión y actualización de la literatura sobre la aportación de la planificación quirúrgica y de la navegación en el manejo de la enfermedad oncológica de cabeza y cuello, para valorar y determinar sus aplicaciones actuales. Material y métodos: Se realiza una búsqueda electrónica empleando los términos craniomaxillofacial tumors, head and neck cancer, navigation system, computer-assisted surgery y oral cancer. Resultados: El número de artículos encontrados en la revisión de la literatura ha sido de 16, publicados entre los años 1991 y 2014. Entre ellos no hay ninguna revisión sistemática, hay 5 artículos de revisión, 6 series de casos y 5 casos clínicos. Solo 10 artículos aportan información completa en relación con la enfermedad oncológica manejada con tecnología de navegación quirúrgica. Actualmente las aplicaciones de la navegación en oncología de cabeza y cuello pueden enumerarse en las siguientes áreas: biopsia guiada, resección y reconstrucción de tumores, monitorización del volumen del tumor, control de márgenes de resección quirúrgica basados en TC, RMN o PET y sistema de comunicación interdisciplinar. Conclusiones: Actualmente hay un número escaso de publicaciones sobre las aplicaciones de la navegación quirúrgica en el novedoso ámbito de la oncología de cabeza y cuello. A pesar de la ausencia de revisiones sistemáticas, parece tener un futuro prometedor por la valiosa aportación que hace para el manejo de tumores de cabeza y cuello, como proporcionar precisión anatómica, precisión diagnóstica y seguridad quirúrgica, siendo de gran utilidad en el tratamiento oncológico multidisciplinar.

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Transport in the blood of an anti-tumor water-soluble rutheniun cyclopentadienyl complex: a fluorescence study on albumin binding

Dissertação de mestrado, Qualidade em Análises, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Análise e Prevenção de avarias de um veio de manivelas de um motor Pielstick

Na engenharia mecânica há cada vez mais necessidade de utilizar e de prever o comportamento das máquinas térmicas, mais propriamente dos motores de combustão interna, em especial na área da manutenção e da prevenção de falha num dos componentes vitais de um motor a 4 tempos: o veio de manivelas. Esta situação já tem sido bastante observada na indústria mecânica naval, nomeadamente na Marinha Portuguesa e, devido ao seu elevado grau de importância no desempenho de qualquer motor, decidiu-se focar o trabalho desta tese no estudo dos motores a diesel S.E.M.T Pielstick das unidades navais da Marinha Portuguesa, mais especificamente das corvetas da classe “João Coutinho” e da classe “ Baptista de Andrade”, devido ao historial de ocorrência de falhas no veio de manivelas nesta classe de navios e em outras da Marinha Portuguesa. Para efetuar este estudo, utilizaram-se todos os dados relativos ao historial de ocorrências de falhas destes motores, bem como todos os dados disponíveis do fabricante destes motores, por forma a reproduzir da forma mais fiável possível um modelo tridimensional do veio de manivelas no programa de modelação informática CAD Solidworks®, e possibilitar a análise cinemática do veio de manivelas. Desta forma, foi possível simular as condições de funcionamento do motor, assim como analisar e determinar a causa de falha do veio de manivelas, visando prolongar a vida útil dos veios de manivelas, contribuindo não só para menores custos de manutenção mas também para o aumento da operacionalidade destes navios.

Integer Linear Programming for Sequence Problems: A general approach to reduce the problem size

Sequence problems belong to the most challenging interdisciplinary topics of the actuality. They are ubiquitous in science and daily life and occur, for example, in form of DNA sequences encoding all information of an organism, as a text (natural or formal) or in form of a computer program. Therefore, sequence problems occur in many variations in computational biology (drug development), coding theory, data compression, quantitative and computational linguistics (e.g. machine translation). In recent years appeared some proposals to formulate sequence problems like the closest string problem (CSP) and the farthest string problem (FSP) as an Integer Linear Programming Problem (ILPP). In the present talk we present a general novel approach to reduce the size of the ILPP by grouping isomorphous columns of the string matrix together. The approach is of practical use, since the solution of sequence problems is very time consuming, in particular when the sequences are long.

MULTISCALE MODELING OF LIQUID CRYSTALLINE/NANOTUBE COMPOSITES

The objective of this research is to synthesize structural composites designed with particular areas defined with custom modulus, strength and toughness values in order to improve the overall mechanical behavior of the composite. Such composites are defined and referred to as 3D-designer composites. These composites will be formed from liquid crystalline polymers and carbon nanotubes. The fabrication process is a variation of rapid prototyping process, which is a layered, additive-manufacturing approach. Composites formed using this process can be custom designed by apt modeling methods for superior performance in advanced applications. The focus of this research is on enhancement of Young's modulus in order to make the final composite stiffer. Strength and toughness of the final composite with respect to various applications is also discussed. We have taken into consideration the mechanical properties of final composite at different fiber volume content as well as at different orientations and lengths of the fibers. The orientation of the LC monomers is supposed to be carried out using electric or magnetic fields. A computer program is modeled incorporating the Mori-Tanaka modeling scheme to generate the stiffness matrix of the final composite. The final properties are then deduced from the stiffness matrix using composite micromechanics. Eshelby's tensor, required to calculate the stiffness tensor using Mori-Tanaka method, is calculated using a numerical scheme that determines the components of the Eshelby's tensor (Gavazzi and Lagoudas 1990). The numerical integration is solved using Gaussian Quadrature scheme and is worked out using MATLAB as well. . MATLAB provides a good deal of commands and algorithms that can be used efficiently to elaborate the continuum of the formula to its extents. Graphs are plotted using different combinations of results and parameters involved in finding these results

Development and Verification of Control and Protection Strategies in Hybrid AC/DC Power Systems for Smart Grid Applications

Modern power networks incorporate communications and information technology infrastructure into the electrical power system to create a smart grid in terms of control and operation. The smart grid enables real-time communication and control between consumers and utility companies allowing suppliers to optimize energy usage based on price preference and system technical issues. The smart grid design aims to provide overall power system monitoring, create protection and control strategies to maintain system performance, stability and security. This dissertation contributed to the development of a unique and novel smart grid test-bed laboratory with integrated monitoring, protection and control systems. This test-bed was used as a platform to test the smart grid operational ideas developed here. The implementation of this system in the real-time software creates an environment for studying, implementing and verifying novel control and protection schemes developed in this dissertation. Phasor measurement techniques were developed using the available Data Acquisition (DAQ) devices in order to monitor all points in the power system in real time. This provides a practical view of system parameter changes, system abnormal conditions and its stability and security information system. These developments provide valuable measurements for technical power system operators in the energy control centers. Phasor Measurement technology is an excellent solution for improving system planning, operation and energy trading in addition to enabling advanced applications in Wide Area Monitoring, Protection and Control (WAMPAC). Moreover, a virtual protection system was developed and implemented in the smart grid laboratory with integrated functionality for wide area applications. Experiments and procedures were developed in the system in order to detect the system abnormal conditions and apply proper remedies to heal the system. A design for DC microgrid was developed to integrate it to the AC system with appropriate control capability. This system represents realistic hybrid AC/DC microgrids connectivity to the AC side to study the use of such architecture in system operation to help remedy system abnormal conditions. In addition, this dissertation explored the challenges and feasibility of the implementation of real-time system analysis features in order to monitor the system security and stability measures. These indices are measured experimentally during the operation of the developed hybrid AC/DC microgrids. Furthermore, a real-time optimal power flow system was implemented to optimally manage the power sharing between AC generators and DC side resources. A study relating to real-time energy management algorithm in hybrid microgrids was performed to evaluate the effects of using energy storage resources and their use in mitigating heavy load impacts on system stability and operational security.

DOMESTIC VIOLENCE IN PERSPECTIVE OF WOMEN WHO LIVED IT

Introduction: Knowing the experience of abuse, contextual determinants that led to the rupture of the situation and attempts to build a more harmonious future, it is essential to work sensitivities and better understand victims of domestic violence. Objectives: To understand the suffering of women victims of violence. Methods: This is an intentional sample of 21 women who were at shelter home or in the community. The data were collected by in- Documento descargado de http://www.elsevier.es el 13-10-2016 3rd World Congress of Health Research 21 terviews, guided by a script organized into four themes. The interviews were conducted with audio record, the permission of the participants were fully passed the text and analyzed as two different corpuses, depending on the context in which they occurred. The analysis was conducted using the ALCESTE computer program. The study obtained a favorable opinion of the Committee on Health and Welfare of the University of Évora. Results: From the irst sample analysis emerged ive classes. The association of the words gave the meaning of each class that we have appointed as Class 1 - Precipitating Events; Class 2 - Experience of abuse; Class 3 - Two feet in the present and looking into the future; Class 4 - The present and learning from the experience of abuse; and Class 5 - Violence in general. From the analysis of the sample in the community four classes emerged that we have appointed as Class 1 - Violence in general; Class 2 - Precipitating Events; Class 3 - abuse of experience; and class 4 - Support in the process. Conclusions: Women who are at shelter home have this experience of violence and its entire context a lot are very focused on their experiences and the future is distant and unclear. Women in the community have a more comprehensive view of the phenomenon of violence as a whole, they can decentralize to their personal experiences and recognize the importance of support in the future construction process.