Asiakassuhdejohtaminen kannattavuusnäkökulmasta

Tutkimuksessa selvitetään miten asiakassuhteita johdetaan asiakaskannattavuuden perusteella erilaisissa yrityksissä. Kirjallisuuskatsauksessa perehdytään laskentatoimen ja markkinoinnin kirjallisuuteen asiakaslaskentatoimen ja asiakassuhdejohtamisen osalta. Asiakaskannattavuusajattelua avataan eri asiakaslaskentatoimen menetelmien avulla. Asiakassuhdejohtamista taas käsitellään suhdemarkkinoinnin ja prosessiajattelun näkökulmasta sekä tarkastellaan kannattaviin ja kannattamattomiin asiakassuhteisiin liittyviä mahdollisuuksia, ongelmia ja menettelytapoja. Teoriaosuuden lopuksi esitetään yhteenveto, kuinka kannattavuusajattelun tulisi näkyä asiakassuhdejohtamisessa. Empiirisessä osiossa tutkitaan neljän eri yrityksen tapaa johtaa asiakassuhteitaan sekä kannattavuusajattelun näkymistä asiakassuhdejohtamisessa. Aineisto kerättiin teemahaastattelujen avulla. Kannattavuusajattelu nousee esille yritysten tavoissa johtaa asiakassuhteitaan. Kuitenkin monenlaiset rajoitukset toimialalla, markkinoilla tai yrityksen resursseissa aiheuttavat sen, ettei kannattavuusperusteinen asiakassuhteiden johtaminen ole yhtä monipuolista ja syvällistä, kuin kirjallisuudessa esitetään.

Soil penetration resistance analysis by multivariate and geostatistical methods

The penetration resistance (PR) is a soil attribute that allows identifies areas with restrictions due to compaction, which results in mechanical impedance for root growth and reduced crop yield. The aim of this study was to characterize the PR of an agricultural soil by geostatistical and multivariate analysis. Sampling was done randomly in 90 points up to 0.60 m depth. It was determined spatial distribution models of PR, and defined areas with mechanical impedance for roots growth. The PR showed a random distribution to 0.55 and 0.60 m depth. PR in other depths analyzed showed spatial dependence, with adjustments to exponential and spherical models. The cluster analysis that considered sampling points allowed establishing areas with compaction problem identified in the maps by kriging interpolation. The analysis with main components identified three soil layers, where the middle layer showed the highest values of PR.

Climate risk in maize crop in the northeastern of Brazil based on climate change scenarios

This study evaluates the impacts of climate change on the agricultural zoning of climatic risk in maize crop cultivated in the Northeastern of Brazil, based on the Intergovernmental Panel on Climate Change (IPCC) reports. The water balance model, combined with geospatial technologies, was used to identify areas of the study region where the crops could suffer yield restrictions due to climate change. The data used in the study were the time series of rainfall with at least 30 years of daily data, crop coefficients, potential evapotranspiration and duration of the crop cycle. The scenarios of the increasing of air temperature used in the simulations were of 1.5ºC, 3ºC and 5ºC. The sowing date of maize crop from January to March appears to be less affected by warming scenarios than the sowing in November and December or April and May.

Use of penetrometers in agriculture: a review

Soil physical quality can be easily and quickly evaluated by using simple equipment to identify levels of soil compaction. Hence, it is necessary to know the variables responsible for changes in the soil penetration resistance (SPR). The aim of this review is to identify the main factors related to the various equipment used for assessing SPR as a soil physical quality indicator in agriculture. This literature review describes the different types of equipment used and its relationship with SPR. A wide range of procedures, devices, and equipments are available. Much of variability in SPR results is related to the equipment model, cone angle and diameter, and penetration rate. Usually, restrictions to root growth are correlated with SPR values above 2-3 MPa. However, comparisons of SPR values obtained under different soil moisture regimes in the same soil type have provided conflicting results of difficult interpretation. In order to minimize these problems, there is a need for standardization of measurement procedures and interpretation, and/or correction of SPR values according to a soil water content of reference.

Litium-ioniakun tasapainon hallinta

Nykyaikaisen liikkuvan sähkökäytön energianlähteenä voi toimia jopa sadoista yksittäisistä sarjaankytketyistä litium-ionikennoista muodostuva akusto. Luotettaviin mittauksiin perustuva valvonta ja käytönohjaus on erityisen tärkeää litium-ioniakuissa, jotka ovat herkkiä yli- ja alijännitteille sekä korkeille lämpötiloille. Monipuolinen hallintajärjestelmä auttaa hyödyntämään akun koko kapasiteetin sekä säilyttämään akun suorituskyvyn estämällä väärinkäytön. Tässä työssä keskitytään tarkastelemaan monikennoisten litium-ioniakkujen sovelluksissa ilmeneviä haasteita sekä eri julkaisuissa esitettyjä ratkaisumalleja akun tasapainon hallitsemiseksi.

Techno-Economic Feasibility of Novel On-Line Condition Monitoring Methods in Low Voltage Distribution Networks

The focus in this thesis is to study both technical and economical possibilities of novel on-line condition monitoring techniques in underground low voltage distribution cable networks. This thesis consists of literature study about fault progression mechanisms in modern low voltage cables, laboratory measurements to determine the base and restrictions of novel on-line condition monitoring methods, and economic evaluation, based on fault statistics and information gathered from Finnish distribution system operators. This thesis is closely related to master’s thesis “Channel Estimation and On-line Diagnosis of LV Distribution Cabling”, which focuses more on the actual condition monitoring methods and signal theory behind them.

Testing Futures Market Efficiency and Optimal Hedge Ratio Estimation: Evidence from Futures and Options on RTS

This study investigates futures market efficiency and optimal hedge ratio estimation. First, cointegration between spot and futures prices is studied using Johansen method, with two different model specifications. If prices are found cointegrated, restrictions on cointegrating vector and adjustment coefficients are imposed, to account for unbiasedness, weak exogeneity and prediction hypothesis. Second, optimal hedge ratios are estimated using static OLS, and time-varying DVEC and CCC models. In-sample and out-of-sample results for one, two and five period ahead are reported. The futures used in thesis are RTS index, EUR/RUB exchange rate and Brent oil, traded in Futures and options on RTS.(FORTS) For in-sample period, data points were acquired from start of trading of each futures contract, RTS index from August 2005, EUR/RUB exchange rate March 2009 and Brent oil October 2008, lasting till end of May 2011. Out-of-sample period covers start of June 2011, till end of December 2011. Our results indicate that all three asset pairs, spot and futures, are cointegrated. We found RTS index futures to be unbiased predictor of spot price, mixed evidence for exchange rate, and for Brent oil futures unbiasedness was not supported. Weak exogeneity results for all pairs indicated spot price to lead in price discovery process. Prediction hypothesis, unbiasedness and weak exogeneity of futures, was rejected for all asset pairs. Variance reduction results varied between assets, in-sample in range of 40-85 percent and out-of sample in range of 40-96 percent. Differences between models were found small, except for Brent oil in which OLS clearly dominated. Out-of-sample results indicated exceptionally high variance reduction for RTS index, approximately 95 percent.

Energian talteenotto liikkuvassa raskaassa työkoneessa

Tämä työ on osa Integrated Serial and Parallel Hybrid Drives in Working Machines projektia. Työssä simuloidaan ja lasketaan energian palautuspotentiaalia raskaassa liikkuvassa työkoneessa. Työn alussa aihetta käsitellään yleisesti kirjallisuuskatsauksen muodossa. Tukkikurottaja valittiin simulointien ja laskennan kohteeksi. Työssä suoritettiin alustavat simuloinnit, joiden tarkoituksena oli varmistua, että palautettavaa energiaa on olemassa. Tulokset osoittavat, että energian palauttaminen on mahdollista. Mittaukset ovat osa työtä. Mitatut muuttujat ovat paineet ja pituudet hydraulisylintereistä, rungon kiihtyvyys, sekä kaikki CAN-väylään kytkettyjen antureiden mittaustiedot. Lopulliset simuloinnit perustuvat mitattuihin työkiertoihin. Työsylintereiden ja ajovoimansiirron tehotarpeet valittiin simulointien tarkasteltaviksi mittaussuureiksi. Mahdollinen palautettavan energian määrä eri työkierroissa on työn lopputulos. Tulokset osoittavat, että palautettavan energian määrä on talteenoton kannalta riittävä.

Chelyabinsk CHP-3 “locked power” problem solving

All over the world power systems become bigger and bigger every day. New equipment is installed, new feeders are constructed, new power units are installed. Some old elements of the network, however, are not changed in time. As a result, “bottlenecks” for capacity transmission can occur. By locked power problem the situation when a power plant has installed capacity exceeding the power it can actually deliver is usually meant. Regime, scheme or even technical restrictions-related issues usually cause this kind of problem. It is really important, since from the regime point of view it is typical decision to have a mobile capacity reserve, in case of malfunctions. And, what can be even more significant, power plant owner (JSC Fortum in our case) losses his money because of selling less electrical energy. The goal of master`s thesis is to analyze the current state of Chelyabinsk power system and the CHP-3 (Combined Heat and Power plant) in particular in relation with it`s ability to deliver the whole capacity of the CHP in it`s existing state and also taking into consideration the prospect of power unit 3 installation by the fourth quarter of 2010. The thesis contains some general information about the UPS of Russia, CPS of Ural, power system of Chelyabinsk and the Chelyabinsk region itself. Then the CHP-3 is described from technical point of view with it`s equipment observation. Regimes for the nowadays power system and for the system after the power unit 3 installation are reviewed. The problems occurring are described and, finally, a solution is offered.

Sotilaslentäjän fyysinen suorituskyky sekä työperäiset tuki- ja liikuntaelinoireet

Kirjallisuudesta välittyy useitten vuosikymmenten ajalta tietämys sotilaslentämisen fyysisestä kuormittavuudesta. G-voimista aiheutuva kuormittuminen näyttää johtavan joko akuutisti tai pitkäaikaisesti lentäjän tuki- ja liikuntaelimistön toimintakykyä alentaviin ongelmiin. Erityisesti on selvitetty niskan alueen työperäisten ongelmien syntyä, jolloin on havaittu lentotoiminnan fyysisen kuormittavuuden johtavan ennenaikaiseen rakenteelliseen rappeumaan, haittaa aiheuttavan oireen lisäksi. Kansainvälisen kirjallisuuden mukaan ammatista johtuvista eli työperäisistä oireista kärsii vähintään 2/3 kaikista sotilaslentäjistä. Tietyin edellytyksin lentäjien kaularangan alueen rappeuma on Suomessa hyväksytty ammattitaudiksi vuodesta 1995 alkaen. On arveltu, että hyvästä fyysisestä suorituskyvystä olisi apua tuki- ja liikuntaelin (TULE)-oireilun ennaltaehkäisemisessä ja toimintakyvyn ylläpitämisessä. Tutkimusnäyttö tästä on lentäjien osalta ollut toistaiseksi erittäin niukkaa. Tämän tutkimuksen tavoitteena oli selvittää suomalaisten sotilaslentäjien työperäisen TULE-oireilun esiintyvyyttä, oireista koetun haitan tasoa, lentäjien fyysisen kunnon tasoja virkauran aikana ja näitten kaikkien välisiä yhteyksiä sekä työperäisen TULE-oireen merkitystä sotilaan toimintakykyyn. Tutkimus jakautui kahteen osaan. Poikkileikkauksena lentotoimintaperäisiä TULE-oireita kartoitettiin kyselytutkimuksella, johon vastasi vuositarkastuksen yhteydessä 267 lentäjää vuosina 2004-2005. Joukosta poimittiin ne 195 lentäjää, jotka olivat suorittaneet yleissotilaalliset kuntotestit puolen vuoden sisällä kyselyyn vastaamisesta, ja mitatut testitulokset yhdistettiin kyselytutkimusaineistoon. Tässä aineistossa toteutettiin fyysisesti erilailla kuormittuvien lentäjäryhmien välisiä vertailuja fyysisen kunnon, TULE-esiintyvyyden ja koetun haitan suhteen. Poikkileikkausosassa tutkittiin myös lentäjien virkauran aikaisia tasoeroja yleissotilaallisissa kuntotesteissä (n=195) verrattuna muihin suomalaisiin sotilaisiin. Lisäksi (N=289) selvitettiin ilmailulääketieteellisen tarkastuksen yhteydessä mitattuja, ns. ammatillisia fyysisiä erityisominaisuuksia eri ikäluokissa. Pitkittäisosassa seurattiin 67:n Hawk-suihkuharjoituskoneella aloittaneen Ilmavoimien sotilaslentäjien lentouran aikaista lentotoimintaperäisten TULE-oireitten esiintyvyyttä vuosien 1996 ja 2008 välillä. Lisäksi tutkittiin lentäjien kontakteja työterveyshuoltoon, oireen aiheuttamaa lentokelvottomuusaikaa, työn kuormituksen kumulatiivista kertymää lentotuntien lisääntyessä ja TULE-oireiden esiintyvyyden kannalta kriittisiä ajankohtia lentouran aikana. Tulokset osoittivat, että kaikki seurannassa olleet suomalaiset sotilaslentäjät kokivat jonkinasteisen lentotoimintaperäisen TULE-oireen uransa aikana. Niskan ammattitautiluokituksen tasoisen ongelman esiintyvyys oli 4 % koko lentäjäpopulaatiosta ja 10 % suihkuharjoituskonevaiheen jo läpäisseistä, mutta vastaavanlaisia TULE-ongelmia, ilman riittävää näyttöä ammattitaudista, esiintyi lähes joka kolmannella sotilaslentäjällä. Alaselän osalta lentäjät oireilivat lähes samassa määrin, mutta näitä oireita ei toistaiseksi ole mahdollista määrittää ammattitaudiksi. Lentäjät kävivät varsin vähän valittamassa oireistaan työterveyshuoltoon, jossa käytäneen vasta silloin, kun oire jo selvästi heikentää työtehtävissä vaadittavaa toimintakykyä. Merkittävin lentotoimintaperäisten oireitten esiintymisen kasvu ajoittui 200 Hawk-lentotunnin kohdalle, jolloin koneella saavutetaan eräänlainen optimaalinen G-indeksi eli taktisen liikehtelyn G-tasoylitysten vaihtelu. Tämän jälkeen lentäjät ovat erityisen alttiina akuuteille lennonaikaisille TULE-ongelmille. Oireitten esiintyminen kasvoi eksponentiaalisesti noin 600 lentotuntiin asti. Monimuuttujamallien mukaan työperäisen TULE-oireen esiintyvyysriskiä vähensivät alaraajojen hyvä motoriikka, korkeat valintapisteet ja korkea kaulan fleksion voimataso maksimaalisessa isometrisessä testissä. Yleissotilaallisilla kuntotasoilla ei ollut yhteyttä oireiluun, mutta lihaskunnoltaan voimakkaimmat lentäjät kärsivät tilastollisesti merkittävästi vähemmän haittaa lentotoimintaperäisistä TULE-oireistaan. Yleissotilaallisissa kuntotesteissä lentäjät olivat parempia kuin muut suomalaiset sotilaat. Aktiivisimman lentouran aikana, 30-40-vuotiaina, lentäjien fyysinen suorituskyky oli normaaliväestöön nähden vain keskimääräinen ja urheilijoihin nähden keskimääräistä heikompi. Käytännössä lentäjät eivät kyenneet ylläpitämään valintavaiheen fyysistä suorituskykyään edes kadettivaiheen loppuun asti. Huomattavaa oli lisäksi, että aktiivisen lentouran päätyttyä fyysinen kunto näytti jossain määrin palautuvan kohti lähtötasoa lentäjien ikääntymisestä huolimatta. Lentäjien valintavaiheen aikana mitatun fyysisen suorituskyvyn tason säilyminen aktiivisen lentopalveluksen loppuun asti vaatisi lentäjien fyysisen toimintakyvyn ylläpidon ja kehittämisen tehostamista koulutuksen ja työuran eri vaihessa. Tähän tavoitteeseen nähden Ilmavoimien fyysisen kasvatuksen järjestelyt vaikuttivat alimitoitetuilta. Operatiivisesti huolestuttavaa oli Ilmavoimien ohjaajien fyysisen suorituskyvyn heikentyminen silloin, kun heidän taitojensa puolesta olisi pitänyt olla suorituskykyisimpiä taistelutehtäviinsä. Myös lentäjän terveyttä ja toimintakykyä pitäisi pystyä reaaliaikaisemmin seuraamaan koko lentouran aikana. Ilmavoimille suositellaan moniammatillista lähestymistä sotilaslentäjien toimintakyvyn ylläpitämiseen ja terveysriskien hallintaan yhdessä liikunnan, työterveyshuollon, lentoturvallisuusalan ja operatiivisen suunnittelun asiantuntijoitten kanssa. Lisäksi suositellaan avoimempaa ja eettisesti kestävämpää suhtautumista ammattiin liittyvien terveysongelmien kuvaamiseen sekä fyysisen kunnon kysymyksiin jo lentäjien rekrytointivaiheessa.

Infecções por micobactérias de crescimento rápido resistentes a desinfetantes: uma problemática nacional?

Rapidly growing mycobacteria (RGM) are opportunistic microorganisms and widely distributed into aqueous environment and soil. Human RGM infections are usually associated with contaminated solutions or medical instruments used during invasive procedures. RGM postsurgical infections have recently emerged in Brazil and have caused national alert, considering the risk factors and epidemiological aspects. This study aimed at analysing the main factors linked to the recent RGM outbreaks, with focus on the national epidemic of Mycobacterium massiliense infections related to the BRA100 strains resistant to 2% glutaraldehyde commercial solutions commonly used for preoperative high-level disinfection. Based on previous studies and laboratorial results of assays and colaborations, it has been observed that the cases have been associated with videolaparoscopy for different applications and elective esthetic procedures, such as lipoaspiration and mammary prosthesis implant. Furthermore, outbreaks between 2004 and 2008 and the epidemic in Rio de Janeiro state may be considered particular Brazilian events. Although there are a few epidemiological published studies, some hypotheses based on common aspects related to most national nosocomial occurrences are possible, such as lack of protocols for cleaning and high-level disinfection, use of 2% glutaraldehyde as high-level disinfectant for surgical instruments, and dissemination of M. massiliense BRA100 by unknown mechanisms.

Histopathological changes in liver and gill epithelium of Nile tilapia, Oreochromis niloticus, exposed to waterborne copper

Nile tilapia, Oreochromis niloticus, of both sexes were reared in freshwater and exposed to 0.5, 1.0 and 2.5mg L-1 of waterborne copper for a period of 21 days. Liver and gill samples were collected after 21 days of exposure to copper and lesions were analyzed by light microscopy. The main histopathological changes observed in gills exposed to the highest concentration were edema, lifting of lamellar epithelia and an intense vasodilatation of the lamellar vascular axis. Although less frequent, lamellar fusion caused by the filamentar epithelium proliferation and some lamellar aneurisms were also found. The liver of control group exhibited a quite normal architecture, while the fish exposed to copper showed vacuolation and necrosis. These hepatic alterations were more evident in fish exposed to 1.0 and 2.5mg L-1 copper concentrations. The number of hepatocytes nucleus per mm² of hepatic tissue decreased with the increase of copper concentration. In contrast, the hepatic somatic index was high in fish exposed at 2.5mg L-1 of copper. In short, this work advance new knowledge as influence of copper in the gill and liver histology of O. niloticus and demonstrated that their effects could be observed at different concentrations.

Utilization of Particle Image velocimetry in PPOOLEX condensation experiments

Particle Image Velocimetry, PIV, is an optical measuring technique to obtain velocity information of a flow in interest. With PIV it is possible to achieve two or three dimensional velocity vector fields from a measurement area instead of a single point in a flow. Measured flow can be either in liquid or in gas form. PIV is nowadays widely applied to flow field studies. The need for PIV is to obtain validation data for Computational Fluid Dynamics calculation programs that has been used to model blow down experiments in PPOOLEX test facility in the Lappeenranta University of Technology. In this thesis PIV and its theoretical background are presented. All the subsystems that can be considered to be part of a PIV system are presented as well with detail. Emphasis is also put to the mathematics behind the image evaluation. The work also included selection and successful testing of a PIV system, as well as the planning of the installation to the PPOOLEX facility. Already in the preliminary testing PIV was found to be good addition to the measuring equipment for Nuclear Safety Research Unit of LUT. The installation to PPOOLEX facility was successful even though there were many restrictions considering it. All parts of the PIV system worked and they were found out to be appropriate for the planned use. Results and observations presented in this thesis are a good background to further PIV use.

Situational awareness concept in a multinational collaboration environment : challenges in the information sharing framework

Technological capabilities are built to support different types of collaboration, and this gives the justification to widely observe, how activity environments are influenced by technology. Technology as an enabler can be addressed from different perspectives, other than merely technological. Dynamic, evolving environment is at the same time interesting but also challenging. As a multinational collaboration environment, the maritime surveillance is an good example of time critical and evolving environment, where technological solutions enable new ways of collaboration. Justification for the inspiration to use maritime environment as the baseline for understanding the challenges in creating and maintaining adequate level of situational awareness, derives from the complexity of the collaboration and information sharing environment elements, needed to be taken into account, when analyzing criticalities related to decision making. Situational awareness is an important element supporting decision making, and challenges related to it can also be observed in the maritime environment. This dissertation describes the structures and factors involved in this complex setting, found from the case studies that should be taken into account when trying to understand, how these elements affect the activities. This dissertation focuses on the gray area that is between a life threatening situation and normal everyday activities. From the multinational experimentation series case studies, MNE5 and MNE6 it was possible to observe situations that were not life threatening for the participants themselves, but not also basic every day activities. These case studies provided a unique possibility to see situations, where gaining of situational awareness and decision making are challenged with time critical crisis situations. Unfortunately organizations do not normally take the benefit from the everyday work to prepare themselves for possible emerging crisis situations. This dissertation focuses on creating a conceptual model and a concept that supports organizations – also outside the maritime community – to improve their ability to support gaining of situational awareness from the individual training level, all the way to changes in organizational structures in aiming for better support for decision making from the individual level to the highest decision making level. Quick changes and unpredictability are reality in organizations and organizations do not have the possibility to control all the factors that affect their functioning. Since we cannot be prepared for everything, and predict every crisis, individual activities inside teams and as a part of organizations, need to be supported with guidance, tools and training in order to support acting in challenging situations. In fact the ideology of the conceptual model created, lies especially in the aim of not controlling everything in beforehand, but supporting organizations with concrete procedures to help individuals to react in different, unpredictable situations, instead of focusing on traditional risk prevention and management. Technological capabilities are not automatically solutions for functional challenges; this is why it is justified to broaden the problem area observation from the technological perspective. This dissertation demonstrates that it is possible to support collaboration in a multinational environment with technological solutions, but it requires the recognition of technological limitations and accepting the possible restrictions related to technological innovations. Technology should not be considered value per se, the value of technology should be defined according to the support of activities, including strategic and operational environment evaluation, identification of organizational elements, and taking into account also the social factors and their challenges. Then we are one step closer to providing technological solutions that support the actual activities by taking into account the variables of the activity environment in question. The multidisciplinary view to approach the information sharing and collaboration framework, is derived especially from the complexity of decision making and building of situational awareness, since they are not build or created in vacuity, but in the organizational framework by the people doing it with the technological capabilities, enabled by the organizational structures. Introduced case studies were related to maritime environment, but according to the research results, it is valid to argue, that based on the lessons learned it is possible to create and further develop conceptual model and to create a general concept to support a wider range of organizations in their attempt to gain better level of situational awareness (SA) and to support decision making. To proof the versatile usage of the developed concept, I have introduced the case study findings to the health care environment and reflected the identified elements from the trauma center to the created concept. The main contribution to complete this adventure is the presented situational awareness concept created in the respect to NATO concept structure. This has been done to tackle the challenge of collaboration by focusing on situational awareness in the information sharing context by providing a theoretical ground and understanding, of how these issues should be approached, and how these elements can be generalized and used to support activities in other environments as well. This dissertation research has been a several year evolving process reflecting and affecting presented case studies and this learning experience from the case studies has also affected the goals and research questions of this dissertation. This venture has been written from a retro perspective according to ideology of process modeling and design rationale to present to the reader how this entire journey took place and what where the critical milestones that affected the end result, conceptual model. Support in a challenging information sharing framework can be provided with the right type of combination of tools, procedures and individual effort. This dissertation will provide insights to those with a new approach to war technology for the organizations to gain a better level of awareness and to improve the capabilities in decision making. This dissertation will present, from the war technology starting point, a new approach and possibility for the organizations to create a better level of awareness and support for decision making with the right combination of tools, procedures and individual effort.