Field Testing and Evaluation of a Demonstration Timber Bridge, February 2012

Asphalt wearing surfaces are commonly used on timber bridges with transverse glued-laminated deck panel systems to help protect the timber components. However, poor performance of these asphalt wearing surfaces in the past has resulted in repeated repair and increased maintenance costs. This report describes the field demonstration and testing of a newly-constructed, glued-laminated timber girder bridge. Previous field work revealed that differential panel deflections in the glued-laminated deck were one significant factor resulting in the premature failure of the asphalt wearing surfaces on these bridges. In addition, laboratory work subsequent to the field testing attempted to address the problematic asphalt cracking common in transverse glued-laminated panel decks by testing several deck joint connection alternatives. The field demonstration project described in this report showcases the retrofit detail that was determined to provide the best field performance. The project was a cooperative effort between the Bridge Engineering Center (BEC) at Iowa State University and the United States Department of Agriculture (USDA) Forest Service Forest Products Laboratory (FPL).

Iowa System of Bridge Deck Rehabilitation with Cathodic Protection, HR-1044, 1986

Bridge deck and substructure deterioration due to the corrosive effects of deicing chemicals on reinforcing steel is a problem facing many transportation agencies. The main concern is protection of older bridges with uncoated reinforcing steel. Many different methods have been tried over the past years to repair bridge decks. The Iowa system of bridge deck rehabilitation has proven to be very effective. It consists of scarifying the deck surface, removing any deteriorated concrete, and overlaying with low slump dense concrete. Another rehabilitation method that has emerged is cathodic protection. It has been used for many years in the protection of underground pipelines and in 1973 was first installed on a bridge deck. Cathodic protection works by applying an external source of direct current to the embedded reinforcing steel, thereby changing the electrochemical process of corrosion. The corroding steel, which is anodic, is protected by changing it to a cathodic state. The technology involved in cathodic protection as applied to bridge decks has improved over the last 12 years. One company marketing new technology in cathodic protection systems is Raychem Corporation of Menlo Park, California. Their system utilizes a Ferex anode mesh that distributes the impressed direct current over the deck surface. Ferex mesh was selected because it seemed readily adaptable to the Iowa system of bridge deck rehabilitation. The bridge deck would be scarified, deteriorated concrete removed, Ferex anode mesh installed, and overlaid with low slump dense concrete. The Federal Highway Administration (FHWA) promotes cathodic protection under Demonstration Project No. 34, "Cathodic Protection for Reinforced Concrete Bridge Decks."

Integration in project business : mechanisms for integrating customers and the project network during the life-cycle of industrial projects

This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.

Providing Discourse Services for Researchers in a Repository Setting

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Project Resource Management in R&D Public Sector Organization

In R&D organizations multiple projects are executed concurrently. Problems arises in managing shared resources since they are needed by multiple projects simultaneously. The objective of this thesis was to study how the project and resource management could be developed in a public sector R&D organization. The qualitative research was carried out in the Magnetic Measurements section at CERN where the section measures magnets for particle accelerators and builds state of the art measurement devices for various needs. Hence, the R&D and measurement projects are very time consuming and very complex. Based on the previous research and the requirements from the organization the best alter- native for resource management was to build a project management information system. A centralized database was constructed and on top of it was built an application for interacting and visualizing the project data. The application allows handling project data, which works as a basis for resource planning before and during the projects are executed. It is one way to standardize the work-flow of projects, which strengthens the project process. Additionally, it was noted that the inner customer’s database, the measurement system and the new application needed to be integrated. Further integration ensures that the project data is received efficiently from customers and available not only within the application but also during the concrete work. The research results introduced a new integrated application, which centralizes the project information flow with better visibility.

Irish John Willson United Empire Loyalist Family Fonds

John Willson first came to Upper Canada along with his friend Nathaniel Pettit in the late 1700s. They both moved with their families from New Jersey where they had both been imprisioned for not siding with the rebels and maintaining Loyalist allegiences. Pettit arrived with his four daughters, leaving his son behind. Willson came with his wife and nine children. Willson received 1200 acres of land as well as 200 per child. He settled at the corner of Dorchester road and Thorold Stone Road, where he and his family did very well for themselves. Willson as well as his son Thomas ran ox-teams on the portage. His son John became the proprietor of the Exchange hotel at Niagara, and Charles operated at the Pavilion hotel at Falls View. Shortly after his arrival in Upper Canada John Willson changed his name to “Irish” John Willson, as there were 5 other “John Willsons” which appeared on the Loyalists lists. Irish John drowned in the Niagara River in 1798, and his family continued to thrive in Niagara after his death. His second son Thomas Willson, married Abigail Pettit, daughter of his Father’s friend Nathaniel. Thomas was awarded 250 acres of land as a Loyalist and 200 for Abigail, as she was the daughter of a loyalist. He became a blacksmith and also operated ox-teams along the portage. He was Assessor for Stamford Township for 1800, 1807, 1820 and 1829. During the years 1808, 1822, 1825, 1826 and 1831 he was a tax collector and overseer of Statute of Labour. Thomas and Abigail Willson had nine children together. Francis Bond Head Willson of Beaverdams (mentioned throughout the collection) was a great grandson of Thomas and Abigail. Thomas and his wife are both buried beside the Lundy’s Lane United Church. *for more information on the remaining Willson family please refer to box #1, folders 1-3. * Genealogical information from a paper prepared by Pearl Wilson and given before the Lundy’s Lane Historical Society, May 1945, by Hazel Culp Ferris. Box 1 Folder 1.

Fire Insurance - Cowan & Parks 1851

A fire insurance policy in the amount of one thousand dollars through Aetna Insurance Company of Utica, New York. The cost of twenty two dollars and twenty five cents would give them a one year insurance policy from August 1851 through August 1852.

Savoirs d’expérience et savoirs professionnels : un projet expérimental dans le champ de la santé mentale

Cette thèse est une réflexion d’épistémologie sociale sur la construction des savoirs professionnels et expérientiels portant sur les problèmes de santé mentale ainsi qu’une exploration de leurs rapports à partir d’un projet de recherche montréalais. Ce projet fédéral de recherche et de démonstration visait à évaluer l’impact de l’approche Logement d’abord auprès de personnes avec des problèmes de santé mentale en situation d’itinérance. À Montréal, des pairs, avec une expérience vécue des réalités de la santé mentale et de l’itinérance, ont été impliqués dans le projet de recherche aux côtés d’intervenants, de gestionnaires et de chercheurs. Au fil des mois, leur présence a eu des effets contrastés, contribuant parfois à renforcer les barrières entre les savoirs et les hiérarchies professionnelles en présence dans le projet, et, à d’autres occasions, à les surmonter et entrer dans un processus de co-production de nouveaux savoirs et pratiques. L’analyse des rapports entre les savoirs en présence dans le projet souligne leur caractère complémentaire dans l’intervention publique dans le domaine des services sociaux et de la santé et les forces de l’approche expérimentale mise en oeuvre. La thèse offre également une contribution à la littérature sur la participation citoyenne en proposant une réflexion sur la capacité des citoyens à transformer les institutions publiques. Les données analysées sont issues d’un terrain de deux ans mêlant observations de la participation des pairs et une cinquantaine d’entretiens individuels et collectifs réalisés auprès de pairs aidants, intervenants, chefs d’équipe, psychiatres, gestionnaires et chercheurs.

Implementation of global make to inventory strategy at BASF SE

La optimización y armonización son factores clave para tener un buen desempeño en la industria química. BASF ha desarrollado un proyecto llamada acelerador. El objetivo de este proyecto ha sido la armonización y la integración de los procesos de la cadena de suministro a nivel mundial. El proceso básico de manejo de inventarios se quedó fuera del proyecto y debía ser analizado. El departamento de manejo de inventarios en BASF SE ha estado desarrollando su propia estrategia para la definición de procesos globales de manufactura. En este trabajo se presentará un informe de las fases de la formulación de la estrategia y establecer algunas pautas para la fase de implementación que está teniendo lugar en 2012 y 2013.

Informe de actividades de apoyo al proyecto de investigación :|b“los mecanismos de influencia en la relación de liderazgo”

El presente documento busca dar cuenta de las actividades que desarrollé para dar apoyo y complemento al proyecto de investigación “Los mecanismos de influencia en la relación de liderazgo”, en el cual me desempeñé como asistente de investigación. El proyecto de investigación es adelantado por el profesor Juan Javier Saavedra Mayorga y pertenece a la línea de investigación en Liderazgo de la Facultad de Administración de la Universidad del Rosario.

Estado del arte acerca de las discusiones teóricas sobre soberanía del estado y la unión monetaria europea entre 2002 - 2010. Caso: El Reino Unido

El siguiente trabajo tiene como objetivo el Estado del arte acerca de la discusión teórica de la repercusión de la unión monetaria en el principio de soberanía nacional, específicamente el caso de Gran Bretaña, ya que éste es el único país que expresa abiertamente su incertidumbre referente a algún tipo de amenaza a su soberanía. Se pretende precisar si existen criterios concluyentes, o por el contrario determinar si no hay claridad con respecto al futuro de Gran Bretaña como miembro de la unión monetaria.A partir de lo anterior, se plantean como sus propósitos particulares construir un marco conceptual acerca de la soberanía. Este estado del arte se inicia con citas de los principales autores de finales de siglo XVII y XVIII y finaliza con las posiciones conceptuales aportadas por los teóricos modernos motivados por el nacimiento de la Unión Europea como un nuevo orden político. Entre las que se citan: modelo centrico o intergubernamentalista, modelo de gobernabilidad multi-nivel, modelo neo-funcionalista y modelo federalista. Igualmente, el trabajo, busca desarrollar un marco conceptual sobre Unión Monetaria y su evolución hasta el logro de una unión fiscal europea en el periodo de 1950-2010, establecer las relaciones teóricas entre Soberanía del Estado y Unión Monetaria y por último realizar un análisis histórico hermenéutico de la Unión Europea y el caso del Reino Unido de acuerdo a las relaciones evidenciadas en los apartados teóricos entre soberanía del Estado y Unión Monetaria.

Marketin experiencial: revolución de fidelización

Actualmente en Colombia sólo existen dos tiendas por departamento, Falabella y La Polar. Ambas ofrecen productos similares a precios análogos, por lo cual este proyecto busca desarrollar una estrategia de fidelización del cliente, utilizando una novedosa tendencia del marketing, el marketing experiencial, que permitan que Falabella cree una marcada diferenciación estableciendo relaciones a lo largo del tiempo con los clientes. El marco del proyecto es la industria del retail, por lo que inicialmente se definirán conceptos relacionados con el retail y las tiendas por departamentos, y se llevará a cabo un análisis del mercado del retail en Colombia para luego exponer la situación de los principales actores del mercado de las tiendas por departamento: Falabella y La Polar. En este trabajo, se expondrá lo que es el marketing tradicional y las herramientas publicitarias tradicionales, para luego explicar las nuevas tendencias del marketing, donde se explicará acerca del marketing experiencial y el marketing emocional. Resulta interesante desarrollar este tema porque se utiliza una herramienta del marketing que se apoya en otras disciplinas como la economía (principalmente la microeconomía); las llamadas ciencias del comportamiento como la sicología, la sociología, la antropología y la estadística, con el objeto de lograr relaciones de largo plazo entre Falabella y sus clientes.

La sabiduría como competencia gerencial

Aunque el concepto de sabiduría ha sido ampliamente estudiado por expertos de áreas como la filosofía, la religión y la psicología, aún enfrenta limitaciones en cuanto a su definición y evaluación. Por esto, el presente trabajo tiene como objetivo, formular una definición del concepto de sabiduría que permita realizar una propuesta de evaluación del concepto como competencia en los gerentes. Para esto, se realizó un análisis documental de tipo cualitativo. De esta manera, se analizaron diversos textos sobre la historia, las definiciones y las metodologías para evaluar tanto la sabiduría como las competencias; diferenciando la sabiduría de otros constructos y analizando la diferencia entre las competencias generales y las gerenciales para posteriormente, definir la sabiduría como una competencia gerencial. Como resultado de este análisis se generó un prototipo de prueba denominado SAPIENS-O, a través del cuál se busca evaluar la sabiduría como competencia gerencial. Como alcances del instrumento se pueden identificar la posibilidad de medir la sabiduría como competencia en los gerentes, la posibilidad de dar un nuevo panorama a las dificultades teóricas y empíricas sobre la sabiduría y la posibilidad de facilitar el estudio de la sabiduría en ambientes reales, más específicamente en ambientes organizacionales.

Papel de la Organización de Naciones Unidas ONU (MINUGUA) en el proceso de reconstrucción posconflicto guatemalteco en materia de justicia transicional (1994-2004). Un estado del arte

Estado del arte que recopila pronunciamientos de diversos autores sobre el papel de la Organización de Naciones Unidas, específicamente la Misión MINUGUA, en el proceso de reconstrucción posconflicto en Guatemala comprendido entre el año 1994 y 2004. Se basa en algunas dimensiones de la democratización como son el Estado de Derecho, la democracia representativa, la preeminencia del poder civil, y el fortalecimiento de la cultura democrática. Así mismo, tiene en cuenta los elementos de la justicia transicional, a saber: verdad, justicia y reparación.

La estructura y funcionalidad de los sistemas en el modelo de Bronfenbrenner y su utilidad en entornos empresariales

El proyecto será desarrollado en base al modelo ecológico del desarrollo humano, (Bronfenbrenner, 1999) partiendo desde la explicación y conceptualización del modelo en términos generales, guiando la investigación hacia un ámbito organizacional en donde se podrá aplicar la teoría descrita por Bronfenbrenner y así, determinar cuál es la estructura y funcionalidad de los sistemas en el modelo además de establecer qué utilidad tiene en entornos empresariales por medio del análisis de los múltiples sistemas, relaciones, interacciones y efectos que tienen y que desarrollan las empresas u organizaciones en el transcurso de su vida. A lo largo de la investigación se hará referencia a diferentes conceptos relacionados tanto con el modelo como con el mundo en que se desarrollan las organizaciones, tales como clusters, sistemas, sectores, estrategias, marketing relacional, comunidad, interacciones, influencias, entre otros; los cuales permitirán acercar lo mayor posible el modelo de Bronfenbrenner al mundo empresarial y lograr desarrollar de mejor manera la intención de aplicar el modelo al mundo organizacional.