Modélisation des liens entre des variables associées à l’environnement scolaire et la performance à l’écrit en français des finissants du secondaire au Québec

Le ministère de l’Éducation, du Loisir et du Sport (MELS) publie tous les ans des indicateurs (MELS, 2007) qui traitent de plusieurs aspects du système scolaire québécois. Quoique le MELS insiste sur l’obligation pour les écoles primaires et secondaires d’obtenir des résultats probants en termes d’« efficacité », les indicateurs utilisés pour apprécier la performance des écoles ne sont pas nécessairement conçus à cette fin. Une étude du MELS rapporte que les élèves de 5e secondaire éprouvent de la difficulté à obtenir de bons résultats à deux critères de correction (syntaxe et ponctuation, orthographe), parmi les six de l’épreuve unique de français écrit (MELS, 2008). Ce fait nous amène à nous intéresser à l’étude de la modélisation des liens entre des facteurs associés à l’environnement scolaire et les résultats des élèves de la région métropolitaine de Montréal, en ce qui a trait à ces deux critères pour les cohortes des années 2006, 2007 et 2008. Nous procédons d’abord à des analyses descriptives des variables pour chacune des trois populations. Nous poursuivons l’analyse en effectuant plusieurs modélisations multiniveaux multivariées des deux critères en fonction de variables indépendantes, caractéristiques de l’élève et de l’école. Les résultats de la présente recherche indiquent une relative stabilité dans la performance des élèves pour les trois années, avec une légère amélioration de la performance pour la cohorte de 2007, et qui se maintient pour la cohorte de 2008. Les élèves du secteur privé obtiennent de meilleurs résultats que ceux du public. Le résultat des filles est supérieur à celui des garçons et les élèves de langue maternelle française obtiennent de meilleurs résultats que ceux de langues maternelles différentes du français. Il importe cependant d’apporter quelques nuances dans l’interprétation de ces résultats. En outre, la part de variance dans la performance des élèves attribuable à l’élève est de l’ordre de 75,0 % et de l’ordre de 25,0 % à l’école. On note un effet différentiel des facteurs d’élève et d’école selon le critère considéré. Les variables caractéristiques de l’élève comptent pour 13,9 % de la variance totale de la performance des élèves en syntaxe et ponctuation et pour 9,8 % en orthographe. Les variables caractéristiques de l’école comptent pour 3,7 % de la variance totale de la performance des élèves en syntaxe et ponctuation et pour 6,4 % en orthographe. Certains facteurs d’école, comme la taille, la mixité ne semblent pas présenter un lien significatif avec la performance des élèves.

Construction d'une échelle décrivant les niveaux de compétence de collaboration, à partir d'indicateurs validés par des enseignants cliniciens en médecine

La collaboration est une compétence essentielle que les futurs médecins doivent développer. La détermination des niveaux de compétence est cruciale dans la planification de cet apprentissage. Les échelles descriptives suscitent un intérêt croissant, car elles décrivent en termes qualitatifs les performances attendues. Nous inspirant de la méthodologie mixte de Blais, Laurier, & Rousseau (2009), nous avons construit en cinq étapes une échelle de niveau de compétence de collaboration: 1) formulation d’une liste d’indicateurs situés à quatre niveaux de la formation médicale (préclinique, externat, résidence junior et sénior) par les chercheurs (n= 3) et un groupe d’éducateurs (n=7), leaders pédagogiques possédant une expertise pour la compétence de collaboration; 2) sondage en ligne comprenant quatre questionnaires portant sur les niveaux de 118 indicateurs, auprès d’enseignants cliniciens représentant les différentes spécialités (n=277); 3) analyse, avec le modèle partial credit de Rasch, des réponses aux questionnaires appariés par calibration concurrente; 4) détermination des niveaux des indicateurs par les éducateurs et les chercheurs; et 5) rédaction de l’échelle à partir des indicateurs de chaque niveau. L’analyse itérative des réponses montre une adéquation au modèle de Rasch et répartit les indicateurs sur l’échelle linéaire aux quatre niveaux. Les éducateurs déterminent le niveau des 111 indicateurs retenus en tenant compte des résultats du sondage et de la cohérence avec le curriculum. L’échelle comporte un paragraphe descriptif par niveau, selon trois capacités : 1) participer au fonctionnement d’une équipe; 2) prévenir et gérer les conflits; et 3) planifier, coordonner et dispenser les soins en équipe. Cette échelle rend explicites les comportements collaboratifs attendus à la fin de chaque niveau et est utile à la planification de l’apprentissage et de l’évaluation de cette compétence. La discordance entre les niveaux choisis par les éducateurs et ceux issus de l’analyse des réponses des enseignants cliniciens est principalement due au faible choix de réponse du niveau préclinique par les enseignants et aux problèmes d’adéquation pour les indicateurs décrivant la gestion des conflits. Cette recherche marque une avan- cée dans la compréhension de la compétence de collaboration et démontre l’efficacité de la méthodologie de Blais (2009) dans un contexte de compétence transversale, en sciences de la santé. Cette méthodologie pourrait aider à approfondir les trajectoires de développement d’autres compétences.

Les dimensions négligées de l'évaluation de la performance : les valeurs et la qualité de vie au travail

L’objet de cette thèse est l’élaboration d’un modèle logique de mesure du maintien des valeurs, ainsi que son opérationnalisation afin d’entreprendre l’évaluation de la performance des systèmes de santé. Le maintien des valeurs est l’une des quatre fonctions de la théorie de l’action sociale de T.Parsons permettant d’analyser les systèmes d’action. Les autres fonctions sont l’adaptation, la production et l’atteinte des buts. Cette théorie est la base du modèle EGIPSS (évaluation globale et intégrée de la performance des systèmes de santé), dans lequel cette thèse s’insère. La fonction étudiée correspond, dans l’oeuvre de T.Parsons, au sous-système culturel. Elle renvoie à l’intangible, soit à l’univers symbolique par lequel l’action prend son sens et les fonctions du système s’articulent. Le modèle logique de mesure du maintien des valeurs est structuré autour de deux concepts principaux, les valeurs individuelles et organisationnelles et la qualité de vie au travail. À travers les valeurs individuelles et organisationnelles, nous mesurons la hiérarchie et l’intensité des valeurs, ainsi que le niveau de concordance interindividuelle et le degré de congruence entre les valeurs individuelles et organisationnelles. La qualité de vie au travail est composée de plusieurs concepts permettant d’analyser et d’évaluer l’environnement de travail, le climat organisationnel, la satisfaction au travail, les réactions comportementales et l’état de santé des employés. La mesure de ces différents aspects a donné lieu à la conception de trois questionnaires et de trente indicateurs. Ma thèse présente, donc, chacun des concepts sélectionnés et leurs articulations, ainsi que les outils de mesure qui ont été construits afin d’évaluer la dimension du maintien des valeurs. Enfin, nous exposons un exemple d’opérationnalisation de ce modèle de mesure appliqué à deux hôpitaux dans la province du Mato Grosso du Sud au Brésil. Cette thèse se conclut par une réflexion sur l’utilisation de l’évaluation comme outil de gestion soutenant l’amélioration de la performance et l’imputabilité. Ce projet comportait un double enjeu. Tout d’abord, la conceptualisation de la dimension du maintien des valeurs à partir d’une littérature abondante, mais manquant d’intégration théorique, puis la création d’outils de mesure permettant de saisir autant les aspects objectifs que subjectifs des valeurs et de la qualité de vie au travail. En effet, on trouve dans la littérature de nombreuses disciplines et de multiples courants théoriques tels que la psychologie industrielle et organisationnelle, la sociologie, les sciences infirmières, les théories sur le comportement organisationnel, la théorie des organisations, qui ont conçu des modèles pour analyser et comprendre les perceptions, les attitudes et les comportements humains dans les organisations. Ainsi, l’intérêt scientifique de ce projet découle de la création d’un modèle dynamique et intégrateur offrant une synthèse des différents champs théoriques abordant la question de l’interaction entre les perceptions individuelles et collectives au travail, les conditions objectives de travail et leurs influences sur les attitudes et les comportements au travail. D’autre part, ce projet revêt un intérêt opérationnel puisqu’il vise à fournir aux décideurs du système de santé des connaissances et données concernant un aspect de la performance fortement négligé par la plupart des modèles internationaux d’évaluation de la performance.

Indicateurs de la performance des soins infirmiers ambulatoires : une scoping review

Travail dirigé présenté à la Faculté des sciences infirmières en vue de l’obtention du grade de maîtrise en sciences infirmières option administration des services infirmiers

Initier une démarche d’analyse de la performance des services infirmiers

Rapport de stage présenté à la Faculté des Sciences infirmières en vue de l’obtention du grade de maîtrise en Administration des services infirmiers, option stage

L’optimisation de la performance des services infirmiers : miser sur des pratiques de gestion utilisées par les organisations hautement performantes

Travail dirigé présenté à la Faculté des Sciences Infirmières en vue de l’obtention du grade de Maître ès Sciences (M. Sc.) en sciences infirmière option administration des sciences infirmières

Influence Of Forecasting, Planning And Controlling On The Performance Of Small And Medium Enterprises

Production Planning and Control (PPC) systems have grown and changed because of the developments in planning tools and models as well as the use of computers and information systems in this area. Though so much is available in research journals, practice of PPC is lagging behind and does not use much from published research. The practices of PPC in SMEs lag behind because of many reasons, which need to be explored This research work deals with the effect of identified variables such as forecasting, planning and control methods adopted, demographics of the key person, standardization practices followed, effect of training, learning and IT usage on firm performance. A model and framework has been developed based on literature. Empirical testing of the model has been done after collecting data using a questionnaire schedule administered among the selected respondents from Small and Medium Enterprises (SMEs) in India. Final data included 382 responses. Hypotheses linking SME performance with the use of forecasting, planning and controlling were formed and tested. Exploratory factor analysis was used for data reduction and for identifying the factor structure. High and low performing firms were classified using a Logistic Regression model. A confirmatory factor analysis was used to study the structural relationship between firm performance and dependent variables.

A key based cache replacement policy for cooperative caching in mobile ad hoc networks

Cooperative caching in mobile ad hoc networks aims at improving the efficiency of information access by reducing access latency and bandwidth usage. Cache replacement policy plays a vital role in improving the performance of a cache in a mobile node since it has limited memory. In this paper we propose a new key based cache replacement policy called E-LRU for cooperative caching in ad hoc networks. The proposed scheme for replacement considers the time interval between the recent references, size and consistency as key factors for replacement. Simulation study shows that the proposed replacement policy can significantly improve the cache performance in terms of cache hit ratio and query delay

A study on the performance of flexible pavements on mature soil subgrades

The country has witnessed tremendous increase in the vehicle population and increased axle loading pattern during the last decade, leaving its road network overstressed and leading to premature failure. The type of deterioration present in the pavement should be considered for determining whether it has a functional or structural deficiency, so that appropriate overlay type and design can be developed. Structural failure arises from the conditions that adversely affect the load carrying capability of the pavement structure. Inadequate thickness, cracking, distortion and disintegration cause structural deficiency. Functional deficiency arises when the pavement does not provide a smooth riding surface and comfort to the user. This can be due to poor surface friction and texture, hydro planning and splash from wheel path, rutting and excess surface distortion such as potholes, corrugation, faulting, blow up, settlement, heaves etc. Functional condition determines the level of service provided by the facility to its users at a particular time and also the Vehicle Operating Costs (VOC), thus influencing the national economy. Prediction of the pavement deterioration is helpful to assess the remaining effective service life (RSL) of the pavement structure on the basis of reduction in performance levels, and apply various alternative designs and rehabilitation strategies with a long range funding requirement for pavement preservation. In addition, they can predict the impact of treatment on the condition of the sections. The infrastructure prediction models can thus be classified into four groups, namely primary response models, structural performance models, functional performance models and damage models. The factors affecting the deterioration of the roads are very complex in nature and vary from place to place. Hence there is need to have a thorough study of the deterioration mechanism under varied climatic zones and soil conditions before arriving at a definite strategy of road improvement. Realizing the need for a detailed study involving all types of roads in the state with varying traffic and soil conditions, the present study has been attempted. This study attempts to identify the parameters that affect the performance of roads and to develop performance models suitable to Kerala conditions. A critical review of the various factors that contribute to the pavement performance has been presented based on the data collected from selected road stretches and also from five corporations of Kerala. These roads represent the urban conditions as well as National Highways, State Highways and Major District Roads in the sub urban and rural conditions. This research work is a pursuit towards a study of the road condition of Kerala with respect to varying soil, traffic and climatic conditions, periodic performance evaluation of selected roads of representative types and development of distress prediction models for roads of Kerala. In order to achieve this aim, the study is focused into 2 parts. The first part deals with the study of the pavement condition and subgrade soil properties of urban roads distributed in 5 Corporations of Kerala; namely Thiruvananthapuram, Kollam, Kochi, Thrissur and Kozhikode. From selected 44 roads, 68 homogeneous sections were studied. The data collected on the functional and structural condition of the surface include pavement distress in terms of cracks, potholes, rutting, raveling and pothole patching. The structural strength of the pavement was measured as rebound deflection using Benkelman Beam deflection studies. In order to collect the details of the pavement layers and find out the subgrade soil properties, trial pits were dug and the in-situ field density was found using the Sand Replacement Method. Laboratory investigations were carried out to find out the subgrade soil properties, soil classification, Atterberg limits, Optimum Moisture Content, Field Moisture Content and 4 days soaked CBR. The relative compaction in the field was also determined. The traffic details were also collected by conducting traffic volume count survey and axle load survey. From the data thus collected, the strength of the pavement was calculated which is a function of the layer coefficient and thickness and is represented as Structural Number (SN). This was further related to the CBR value of the soil and the Modified Structural Number (MSN) was found out. The condition of the pavement was represented in terms of the Pavement Condition Index (PCI) which is a function of the distress of the surface at the time of the investigation and calculated in the present study using deduct value method developed by U S Army Corps of Engineers. The influence of subgrade soil type and pavement condition on the relationship between MSN and rebound deflection was studied using appropriate plots for predominant types of soil and for classified value of Pavement Condition Index. The relationship will be helpful for practicing engineers to design the overlay thickness required for the pavement, without conducting the BBD test. Regression analysis using SPSS was done with various trials to find out the best fit relationship between the rebound deflection and CBR, and other soil properties for Gravel, Sand, Silt & Clay fractions. The second part of the study deals with periodic performance evaluation of selected road stretches representing National Highway (NH), State Highway (SH) and Major District Road (MDR), located in different geographical conditions and with varying traffic. 8 road sections divided into 15 homogeneous sections were selected for the study and 6 sets of continuous periodic data were collected. The periodic data collected include the functional and structural condition in terms of distress (pothole, pothole patch, cracks, rutting and raveling), skid resistance using a portable skid resistance pendulum, surface unevenness using Bump Integrator, texture depth using sand patch method and rebound deflection using Benkelman Beam. Baseline data of the study stretches were collected as one time data. Pavement history was obtained as secondary data. Pavement drainage characteristics were collected in terms of camber or cross slope using camber board (slope meter) for the carriage way and shoulders, availability of longitudinal side drain, presence of valley, terrain condition, soil moisture content, water table data, High Flood Level, rainfall data, land use and cross slope of the adjoining land. These data were used for finding out the drainage condition of the study stretches. Traffic studies were conducted, including classified volume count and axle load studies. From the field data thus collected, the progression of each parameter was plotted for all the study roads; and validated for their accuracy. Structural Number (SN) and Modified Structural Number (MSN) were calculated for the study stretches. Progression of the deflection, distress, unevenness, skid resistance and macro texture of the study roads were evaluated. Since the deterioration of the pavement is a complex phenomena contributed by all the above factors, pavement deterioration models were developed as non linear regression models, using SPSS with the periodic data collected for all the above road stretches. General models were developed for cracking progression, raveling progression, pothole progression and roughness progression using SPSS. A model for construction quality was also developed. Calibration of HDM–4 pavement deterioration models for local conditions was done using the data for Cracking, Raveling, Pothole and Roughness. Validation was done using the data collected in 2013. The application of HDM-4 to compare different maintenance and rehabilitation options were studied considering the deterioration parameters like cracking, pothole and raveling. The alternatives considered for analysis were base alternative with crack sealing and patching, overlay with 40 mm BC using ordinary bitumen, overlay with 40 mm BC using Natural Rubber Modified Bitumen and an overlay of Ultra Thin White Topping. Economic analysis of these options was done considering the Life Cycle Cost (LCC). The average speed that can be obtained by applying these options were also compared. The results were in favour of Ultra Thin White Topping over flexible pavements. Hence, Design Charts were also plotted for estimation of maximum wheel load stresses for different slab thickness under different soil conditions. The design charts showed the maximum stress for a particular slab thickness and different soil conditions incorporating different k values. These charts can be handy for a design engineer. Fuzzy rule based models developed for site specific conditions were compared with regression models developed using SPSS. The Riding Comfort Index (RCI) was calculated and correlated with unevenness to develop a relationship. Relationships were developed between Skid Number and Macro Texture of the pavement. The effort made through this research work will be helpful to highway engineers in understanding the behaviour of flexible pavements in Kerala conditions and for arriving at suitable maintenance and rehabilitation strategies. Key Words: Flexible Pavements – Performance Evaluation – Urban Roads – NH – SH and other roads – Performance Models – Deflection – Riding Comfort Index – Skid Resistance – Texture Depth – Unevenness – Ultra Thin White Topping

Autonomes Performance-Management in dienstorientierten Architekturen

Die Bedeutung des Dienstgüte-Managements (SLM) im Bereich von Unternehmensanwendungen steigt mit der zunehmenden Kritikalität von IT-gestützten Prozessen für den Erfolg einzelner Unternehmen. Traditionell werden zur Implementierung eines wirksamen SLMs Monitoringprozesse in hierarchischen Managementumgebungen etabliert, die einen Administrator bei der notwendigen Rekonfiguration von Systemen unterstützen. Auf aktuelle, hochdynamische Softwarearchitekturen sind diese hierarchischen Ansätze jedoch nur sehr eingeschränkt anwendbar. Ein Beispiel dafür sind dienstorientierte Architekturen (SOA), bei denen die Geschäftsfunktionalität durch das Zusammenspiel einzelner, voneinander unabhängiger Dienste auf Basis deskriptiver Workflow-Beschreibungen modelliert wird. Dadurch ergibt sich eine hohe Laufzeitdynamik der gesamten Architektur. Für das SLM ist insbesondere die dezentrale Struktur einer SOA mit unterschiedlichen administrativen Zuständigkeiten für einzelne Teilsysteme problematisch, da regelnde Eingriffe zum einen durch die Kapselung der Implementierung einzelner Dienste und zum anderen durch das Fehlen einer zentralen Kontrollinstanz nur sehr eingeschränkt möglich sind. Die vorliegende Arbeit definiert die Architektur eines SLM-Systems für SOA-Umgebungen, in dem autonome Management-Komponenten kooperieren, um übergeordnete Dienstgüteziele zu erfüllen: Mithilfe von Selbst-Management-Technologien wird zunächst eine Automatisierung des Dienstgüte-Managements auf Ebene einzelner Dienste erreicht. Die autonomen Management-Komponenten dieser Dienste können dann mithilfe von Selbstorganisationsmechanismen übergreifende Ziele zur Optimierung von Dienstgüteverhalten und Ressourcennutzung verfolgen. Für das SLM auf Ebene von SOA Workflows müssen temporär dienstübergreifende Kooperationen zur Erfüllung von Dienstgüteanforderungen etabliert werden, die sich damit auch über mehrere administrative Domänen erstrecken können. Eine solche zeitlich begrenzte Kooperation autonomer Teilsysteme kann sinnvoll nur dezentral erfolgen, da die jeweiligen Kooperationspartner im Vorfeld nicht bekannt sind und – je nach Lebensdauer einzelner Workflows – zur Laufzeit beteiligte Komponenten ausgetauscht werden können. In der Arbeit wird ein Verfahren zur Koordination autonomer Management-Komponenten mit dem Ziel der Optimierung von Antwortzeiten auf Workflow-Ebene entwickelt: Management-Komponenten können durch Übertragung von Antwortzeitanteilen untereinander ihre individuellen Ziele straffen oder lockern, ohne dass das Gesamtantwortzeitziel dadurch verändert wird. Die Übertragung von Antwortzeitanteilen wird mithilfe eines Auktionsverfahrens realisiert. Technische Grundlage der Kooperation bildet ein Gruppenkommunikationsmechanismus. Weiterhin werden in Bezug auf die Nutzung geteilter, virtualisierter Ressourcen konkurrierende Dienste entsprechend geschäftlicher Ziele priorisiert. Im Rahmen der praktischen Umsetzung wird die Realisierung zentraler Architekturelemente und der entwickelten Verfahren zur Selbstorganisation beispielhaft für das SLM konkreter Komponenten vorgestellt. Zur Untersuchung der Management-Kooperation in größeren Szenarien wird ein hybrider Simulationsansatz verwendet. Im Rahmen der Evaluation werden Untersuchungen zur Skalierbarkeit des Ansatzes durchgeführt. Schwerpunkt ist hierbei die Betrachtung eines Systems aus kooperierenden Management-Komponenten, insbesondere im Hinblick auf den Kommunikationsaufwand. Die Evaluation zeigt, dass ein dienstübergreifendes, autonomes Performance-Management in SOA-Umgebungen möglich ist. Die Ergebnisse legen nahe, dass der entwickelte Ansatz auch in großen Umgebungen erfolgreich angewendet werden kann.

Effect of management strategies on the performance of ruminant livestock production systems and the safety of plant and animal products in the city of Sikasso, Mali

The regional population growth in West Africa, and especially its urban centers, will bring about new and critical challenges for urban development policy, especially in terms of ensuring food security and providing employment for the growing population. (Peri-) urban livestock and vegetable production systems, which can contribute significantly to these endeavours, are limited by various constraints, amongst them limited access to expensive production factors and their (in)efficient use. To achieve sustainable production systems with low consumer health risks, that can meet the urban increased demand, this doctoral thesis determined nutrient use efficiencies in representative (peri-) urban livestock production systems in three West African cities, and investigated potential health risks for consumers ensuing from there. The field study, which was conducted during July 2007 to December 2009, undertook a comparative analysis of (peri-) urban livestock production strategies across 210 livestock keeping households (HH) in the three West African cities of Kano/Nigeria (84 HH), Bobo Dioulasso/Burkina Faso (63 HH) and Sikasso/Mali (63 HH). These livestock enterprises were belonging to the following three farm types: commercial gardening plus field crops and livestock (cGCL; 88 HH), commercial livestock plus subsistence field cropping (cLsC; 109 HH) and commercial gardening plus semi-commercial livestock (cGscL; 13 HH) which had been classified in a preceding study; they represented the diversity of (peri-) urban livestock production systems in West Africa. In the study on the efficiency of ruminant livestock production, lactating cowsand sheep herd units were differentiated based on whether feed supplements were offered to the animals at the homestead (Go: grazing only; Gsf: mainly grazing plus some supplement feeding). Inflows and outflows of nutrients were quantified in these herds during 18 months, and the effects of seasonal variations in nutrient availability on animals’ productivity and reproductive performance was determined in Sikasso. To assess the safety of animal products and vegetables, contamination sources of irrigated lettuce and milk with microbiological contaminants, and of tomato and cabbage with pesticide residues in (peri-) urban agriculture systems of Bobo Dioulasso and Sikasso were characterized at three occasions in 2009. Samples of irrigation water, organic fertilizer and ix lettuce were collected in 6 gardens, and samples of cabbage and tomato in 12 gardens; raw and curdled milk were sampled in 6 dairy herds. Information on health risks for consumers of such foodstuffs was obtained from 11 health centers in Sikasso. In (peri-) urban livestock production systems, sheep and goats dominated (P<0.001) in Kano compared to Bobo Dioulasso and Sikasso, while cattle and poultry were more frequent (P<0.001) in Bobo Dioulasso and Sikasso than in Kano. Across cities, ruminant feeding relied on grazing and homestead supplementation with fresh grasses, crop residues, cereal brans and cotton seed cake; cereal grains and brans were the major ingredients of poultry feeds. There was little association of gardens and livestock; likewise field cropping and livestock were rarely integrated. No relation existed between the education of the HH head and the adoption of improved management practices (P>0.05), but the proportion of HH heads with a long-term experience in (peri-) urban agriculture was higher in Kano and in Bobo Dioulasso than in Sikasso (P<0.001). Cattle and sheep fetched highest market prices in Kano; unit prices for goats and chicken were highest in Sikasso. Animal inflow, outflow and dairy herd growth rates were significantly higher (P<0.05) in the Gsf than in the Go cattle herds. Maize bran and cottonseed expeller were the main feeds offered to Gsf cows as dry-season supplement, while Gsf sheep received maize bran, fresh grasses and cowpea pods. The short periodic transhumance of Go dairy cows help them maintaining their live weight, whereas Gsf cows lost weight during the dry season despite supplement feeding at a rate of 1506 g dry matter per cow and day, resulting in low productivity and reproductive performance. The daily live weight gains of calves and lambs, respectively, were low and not significantly different between the Go and the Gsf system. However, the average live weight gains of lambs were significantly higher in the dry season (P<0.05) than in the rainy season because of the high pressure of gastrointestinal parasites and of Trypanosoma sp. In consequence, 47% of the sheep leaving the Go and Gsf herds died due to diseases during the study period. Thermo-tolerant coliforms and Escherichia coli contamination levels of irrigation water significantly exceeded WHO recommendations for the unrestricted irrigation of vegetables consumed raw. Microbial contamination levels of lettuce at the farm gate and the market place in Bobo Dioulasso and at the farm gate in Sikasso were higher than at the market place in Sikasso (P<0.05). Pesticide residues were detected in only one cabbage and one tomato sample and were below the maximum residue limit for consumption. Counts of thermo-tolerant coliforms and Escherichia coli were higher in curdled than in raw milk (P<0.05). From 2006 to x 2009, cases of diarrhea/vomiting and typhoid fever had increased by 11% and 48%, respectively, in Sikasso. For ensuring economically successful and ecologically viable (peri-) urban livestock husbandry and food safety of (peri-) urban foodstuffs of animal and plant origin, the dissemination and adoption of improved feeding practices, livestock healthcare and dung management are key. In addition, measures fostering the safety of animal products and vegetables including the appropriate use of wastewater in (peri-) urban agriculture, restriction to approve vegetable pesticides and the respect of their latency periods, and passing and enforcement of safety laws is required. Finally, the incorporation of environmentally sound (peri-) urban agriculture in urban planning by policy makers, public and private extension agencies and the urban farmers themselves is of utmost importance. To enable an efficient (peri-) urban livestock production in the future, research should concentrate on cost-effective feeding systems that allow meeting the animals’ requirement for production and reproduction. Thereby focus should be laid on the use of crop-residues and leguminous forages. The improvement of the milk production potential through crossbreeding of local cattle breeds with exotic breeds known for their high milk yield might be an accompanying option, but it needs careful supervision to prevent the loss of the local trypanotolerant purebreds.

Implementation Workshop: High Performance Work Organizations

Since the rise of the industrial revolution, there are few challenges that compare in scale and scope with the challenge of implementing lean principles in order to achieve high performance work systems. This report summarize key insights and learning by representatives from a cross section of organizations who are on this journey. Specifically, we report on findings from the first Lean Aircraft Initiative (LAI) Implementation Workshop, which was held on February 5-6, 1997.

An Interpolative Analytical Cache Model with Application to Performance-Power Design Space Exploration

Caches are known to consume up to half of all system power in embedded processors. Co-optimizing performance and power of the cache subsystems is therefore an important step in the design of embedded systems, especially those employing application specific instruction processors. In this project, we propose an analytical cache model that succinctly captures the miss performance of an application over the entire cache parameter space. Unlike exhaustive trace driven simulation, our model requires that the program be simulated once so that a few key characteristics can be obtained. Using these application-dependent characteristics, the model can span the entire cache parameter space consisting of cache sizes, associativity and cache block sizes. In our unified model, we are able to cater for direct-mapped, set and fully associative instruction, data and unified caches. Validation against full trace-driven simulations shows that our model has a high degree of fidelity. Finally, we show how the model can be coupled with a power model for caches such that one can very quickly decide on pareto-optimal performance-power design points for rapid design space exploration.

Social network measures for "nosduocentered" networks, their predictive power on performance

Our purpose in this article is to define a network structure which is based on two egos instead of the egocentered (one ego) or the complete network (n egos). We describe the characteristics and properties for this kind of network which we call “nosduocentered network”, comparing it with complete and egocentered networks. The key point for this kind of network is that relations exist between the two main egos and all alters, but relations among others are not observed. After that, we use new social network measures adapted to the nosduocentered network, some of which are based on measures for complete networks such as degree, betweenness, closeness centrality or density, while some others are tailormade for nosduocentered networks. We specify three regression models to predict research performance of PhD students based on these social network measures for different networks such as advice, collaboration, emotional support and trust. Data used are from Slovenian PhD students and their s