Using health-related quality of life instruments for children with long-term conditions : On the basis of a national quality registry system

Introduction: There has been a continuous development of new technologies in healthcare that are derived from national quality registries. However, this innovation needs to be translated into the workflow of healthcare delivery, to enable children with long-term conditions to get the best support possible to manage their health during everyday life. Since children living with long-term conditions experience different interference levels in their lives, healthcare professionals need to assess the impact of care on children’s day-to-day lives, as a complement to biomedical assessments. Aim: The overall aim of this thesis was to explore and describe the use of instruments about health-related quality of life (HRQOL) in outpatient care for children with long-term conditions on the basis of a national quality registry system. Methods: The research was conducted by using comparative, cross-sectional and explorative designs and data collection was performed by using different methods. The questionnaire DISABKIDS Chronic Generic Measure -37 was used as well as semi-structured interviews and video-recordings from consultations. Altogether, 156 children (8–18 years) and nine healthcare professionals participated in the studies. Children with Type 1 Diabetes (T1D) (n 131) answered the questionnaire DISABKIDS and children with rheumatic diseases, kidney diseases and T1D (n 25) were interviewed after their consultation at the outpatient clinic after the web-DISABKIDS had been used. In total, nine healthcare professionals used the HRQOL instrument as an assessment tool during the encounters which was video-recorded (n 21). Quantitative deductive content analysis was used to describe content in different HRQOL instruments. Statistical inference was used to analyse results from DISABKIDS and qualitative content analysis was used to analyse the interviews and video-recordings. Results: The findings showed that based on a biopsychosocial perspective, both generic and disease-specific instruments should be used to gain a comprehensive evaluation of the child’s HRQOL. The DISABKIDS instrument is applicable when describing different aspects of health concerning children with T1D. When DISABKIDS was used in the encounters, children expressed positive experiences about sharing their results with the healthcare professional. It was discovered that different approaches led to different outcomes for the child when the healthcare professionals were using DISABKIDS during the encounter. When an instructing approach is used, the child’s ability to learn more about their health and how to improve their health is limited. When an inviting or engaging approach is used by the professional, the child may become more involved during the conversations. Conclusions: It could be argued that instruments of HRQOL could be used as a complement to biomedical variables, to promote a biopsychosocial perspective on the child’s health. According to the children in this thesis, feedback on their results after answering to web-DISABKIDS is important, which implies that healthcare professionals need to prioritize time for discussions about results from HRQOL instruments in the encounters. If healthcare professionals involve the child in the discussion of the results of the HRQOL, misinterpreted answers could be corrected during the conversation. Concurrently, this claims that healthcare professionals invite and engage the child.

Développement d'instruments de mesure pour l'évaluation des facteurs influençant l'adoption des pratiques exemplaires pour le traitement de la mise en décharge de l'ulcère du pied diabétique

L'ulcère du pied diabétique (UPD) affecte 15 à 25 % des personnes diabétiques. Le traitement recommandé de la mise en décharge de l'ulcère est peu appliqué, entraînant des délais de guérison excessifs et des coûts élevés pour le système de santé. Peu d'études abordent le sujet des facteurs responsables de la faible adoption des pratiques exemplaires pour le traitement de décharge de l'UPD en soins de première ligne. Les objectifs spécifiques de ce projet de maîtrise sont d'élaborer et de valider deux questionnaires, un dédié aux patients et un dédié aux professionnels de la santé, explorant les facteurs influençant l'adoption des pratiques exemplaires pour le traitement de la mise en décharge de l’UPD en soins de première ligne. En guise de référence à l'élaboration des questionnaires, un guide de développement d'instrument de mesure, inspiré de la théorie du comportement planifié, a été utilisé. L'analyse de deux types de validation a été entreprise, soit l'analyse de la validité de contenu et de la stabilité temporelle. Les résultats ont démontré des scores particulièrement élevés de validité de contenu et des scores de stabilité temporelle satisfaisants pour le questionnaire dédié aux patients. Le questionnaire dédié aux professionnels de la santé a aussi remporté des scores de validité de contenu particulièrement élevés, mais les items ont obtenu des scores de stabilité temporelle faibles. Le niveau de connaissance des participants sur le sujet exploré a eu une influence majeure sur les résultats de stabilité temporelle. Pour la version finale des questionnaires, seulement les items obtenant des scores élevés de validité de contenu et de stabilité temporelle ont été conservés. Cette étude a fait l'objet d'un article de recherche intitulé Development of Survey Tools to Explore Factors Influencing the Adoption of Best Practices for Diabetic Foot Ulcer Offloading et a été soumis à la revue Journal of Wound Ostomy & Continence Nursing. Les réponses obtenues aux items remportant des coefficients de validité forts sont brièvement examinées à la partie discussion. Les résultats de ce projet de maîtrise permettent de souligner la nécessité de recourir à une méthodologie rigoureuse pour l'obtention d'instruments de mesure valides; un élément trop souvent négligé dans les études sur les soins de santé.

Proposition d'instruments pour l'évaluation des compétences de l'élève dans un projet d'équipe en Techniques de génie mécanique au collégial.

Depuis le Renouveau au collégial, la révision des programmes d'études maintenant axés sur le développement des compétences a introduit des changements importants au plan des pratiques enseignantes. Dans ce contexte, les enseignantes et les enseignants ont été appelés à modifier leurs pratiques évaluatives de manière à soutenir le développement des compétences. Certaines situations d'apprentissage appellent une réflexion plus élaborée que ne le permet le cadre habituel de la fonction d'enseignante ou d'enseignant. C'est dans cette optique que nous avons choisi de traiter dans cet essai de maîtrise, de l'évaluation de la compétence de l'élève lorsque des projets sont réalisés en équipe dans un cours en particulier. La problématique du présent essai concerne l'évaluation de projets dans le programme de Techniques de génie mécanique (TGM) option fabrication, au cégep du Vieux Montréal. Dans le cadre du cours de projet de fabrication I (241-B56-VM), deux compétences sont développées soit effectuer la programmation manuelle d'un cours à commande numérique (0133) et conduire une machine-outil à commande numérique (012V). Puisque des apprentissages sont réalisés en contexte de projet d'usinage en équipe, dans un environnement technologique nécessitant l'utilisation de logiciels spécialisés et de tours à commande numérique, équipements essentiels au développement des compétences visées, plusieurs problématiques ont été observées. Des difficultés ont été constatées lors de l'évaluation des apprentissages de l'élève; il appert que les outils d'évaluation utilisés pour soutenir l'apprentissage et pour juger du niveau de maîtrise des compétences devraient être mieux adaptés. De plus, l'interdépendance des élèves en situation de projet en équipe rend plus complexe la démarche conduisant à l'évaluation spécifique de compétences propres à chaque élève. Ces constats nous ont conduits à formuler la question générale de recherche suivante : quels sont les instruments pour évaluer les compétences de l'élève dans le cadre d'un projet réalisé en équipe dans un cours de génie mécanique au collégial? Afin de répondre à cette question de recherche, un cadre de référence a été constitué. Dans un premier temps, celui-ci aborde le concept de compétence et ses composantes. Dans un deuxième temps, l'évaluation des apprentissages dans un programme formulé par compétences aborde dans l'ordre les fonctions de l'évaluation, les orientations qui guident l'évaluation, la démarche et les instruments d'évaluation. Dans un troisième temps, quelques exemples d'expériences pratiques en enseignement supérieur ont permis d'illustrer des pratiques évaluatives mises en application afin d'évaluer les apprentissages dans un projet réalisé en équipe. Au terme de ce cadre de référence, nous retenons que l'évaluation de la compétence de l'élève dans un projet réalisé en équipe requiert l'utilisation de différents instruments d'évaluation formative et certificative. Plusieurs écrits convergent vers l'utilisation du rapport de projet, du journal de bord, des grilles d'évaluation et d'appréciation pour soutenir l'élève et porter un jugement en cours et au terme de l'apprentissage. En nous appuyant sur le cadre de référence construit et dans le but de concevoir des instruments d'évaluation pour porter un jugement sur l'atteinte de la compétence de l'élève qui réalise un projet en équipe dans un cours du programme de Techniques de génie mécanique, les étapes de la recherche-développement de Van der Maren (2003) nous ont guidés vers la conception d'un objet pédagogique. Les étapes de la démarche proposée par Van der Maren (2003) nous ont conduits à conceptualiser et à modéliser l'objet soit des instruments d'évaluation d'un projet réalisé en équipe. Ainsi, en accord avec le cadre de référence un ensemble d'instruments d'évaluation formative et certificative ont été conçus et classés en trois dimensions proposées par Proulx (2004), soit l'évaluation formelle, l'évaluation pratique et l'évaluation personnelle. Parmi les instruments proposés plusieurs types de grilles d'évaluation font appel à l'autoévaluation, à l'évaluation par les pairs et par l'enseignante ou l'enseignant. Dans le cadre de projets réalisés en équipe, ces grilles d'évaluation permettent de suivre et de soutenir la progression des apprentissages, l'implication et la participation au travail d'équipe et l'appréciation de l'élève sur les résultats obtenus. Au terme de cet essai qui nous a permis de proposer des instruments d'évaluation de l'élève lors de la réalisation d'un projet en équipe pour un cours de fabrication mécanique au collégial, nous retenons qu'un travail de conception rigoureux a été mené afin de concevoir et de catégoriser un ensemble d'instruments d'évaluation qui seront mis à l'essai avec des cohortes d'élèves du collégial dès l'hiver 2011.

New Instruments for Impact Assessment: study of an academic library

This study presents a review of new instruments for the impact assessment of libraries and a case study of the evaluation impact of the Library of the Faculty of Science, University of Porto (FCUP), from the students’ point of view. We con ducted a mixed methods research, i.e., which includes both qualitative data, to describe characteristics, in particular human actions, and quantitative data, represented by numbers that indicate exact amounts which can be statistically manipulated. Applying International Standard ISO16439:2014 (E) - Information and documentation - Methods and procedures for assessing the impact of libraries, we collected, 20 opinion texts from students of different nationalities, published in «Notícias da Biblioteca», from January 2013 to December 2014 and have conducted seven interviews.

Mapping spatial and temporal potassium balances in Brazilian soils of south-west Goias.

Introduction: Brazil, is one of the main agricultural producers in the world ranking 1st in the production of sugarcane, coffee and oranges. It is also 2nd as world producer of soybeans and a leader in the harvested yields of many other crops. The annual consumption of mineral fertilizers exceeds 20 million mt, 30% of which corresponds to potash fertilizers (ANDA, 2006). From this statistic it may be supposed that fertilizer application in Brazil is rather high, compared with many other countries. However, even if it is assumed that only one fourth of this enormous 8.5 million km2 territory is used for agriculture, average levels of fertilizer application per hectare of arable land are not high enough for sustainable production. One of the major constraints is the relatively low natural fertility status of the soils which contain excessive Fe and Al oxides. Agriculture is also often practised on sandy soils so that the heavy rainfall causes large losses of nutrients through leaching. In general, nutrient removal by crops such as sugarcane and tropical fruits is much more than the average nutrient application via fertilization, especially in regions with a long history of agricultural production. In the recently developed areas, especially in the Cerrado (Brazilian savanna) where agriculture has expanded since 1980, soils are even poorer than in the "old" agricultural regions, and high costs of mineral fertilizers have become a significant input factor in determining soybean, maize and cotton planting. The consumption of mineral fertilizers throughout Brazil is very uneven. According to the 1995/96 Agricultural Census, only in eight of the total of 26 Brazilian states, were 50 per cent or more of the farms treated "systematically" with mineral fertilizers; in many states it was less than 25 per cent, and in five states even less than 12 per cent (Brazilian Institute for Geography and Statistics; Censo Agropecuario1995/96, Instituto Brazileiro de Geografia e Estadistica; IBGE, www.ibge.gov.br). The geographical application distribution pattern of mineral fertilizers may be considered as an important field of research. Understanding geographical disparities in fertilization level requires a complex approach. This includes evaluation of the availability of nutrients in the soil (and related soil properties e.g. CEC and texture), the input of nutrients with fertilizer application, and the removal of nutrients by harvested yields. When all these data are compiled, it is possible to evaluate the balance of particular nutrients for certain areas, and make conclusions as to where agricultural practices should be optimized. This kind of research is somewhat complicated, because it relies on completely different sources of data, usually from incomparable data sources, e.g. soil characteristics attributed to soil type areas, in contrast to yields by administrative regions, or farms. A priority tool in this case is the Geographical Information System (GIS), which enables attribution of data from different fields to the same territorial units, and makes possible integration of these data in an "inputoutput" model, where "input" is the natural availability of a nutrient in the soil plus fertilization, and "output" export of the same nutrient with the removed harvested yield.

Energy balances in sugar cane, coffee and natural vegetation in the northeastern side of the São Paulo state, Brazil

Under land and climate change scenarios, agriculture has experienced water competitions among other sectors in the São Paulo state, Brazil. On the one hand, in several occasions, in the northeastern side of this state, nowadays sugar-cane is expanding, while coffee plantations are losing space. On the other hand, both crops have replaced the natural vegetation composed by Savannah and Atlantic Coastal Forest species. Under this dynamic situation, geosciences are valuable tools for evaluating the large-scale energy and mass exchanges between these diffe rent agro-ecosystems and the lower atmosphere. For quantification of the energy balance components in these mixed agro-ecosystems, the bands 1 and 2 from the MODIS product MOD13Q1 we re used throughout SA FER (Surface Algorithm for Evapotranspiration Retrieving) algorithm, which was applied together with a net of 12 automatic weather stations, during the year 2015 in the main sugar cane and coffee growing regions, located at the no rtheastern side of the state. The fraction of the global solar radiation (R G ) transformed into net radiation (Rn) was 52% for sugar cane and 53% for both, coffee and natural vegetation. The respective annual fractions of Rn used as λ E were 0.68, 0.87 and 0.77, while for the sensible heat (H) fluxes they were 0.27, 0.07 and 0.16. From April to July, heat advection raised λ E values above Rn promoting negative H, however these effects were much and less strong in coffee and sugar cane crop s, respectively. The smallest daily Rn fraction for all agro-ecosystems was for the soil heat flux (G), with averages of 5%, 6% and 7% in sugar cane, coffee and natural vegetation. From the energy balance analyses, we could conclude that, sugar-cane crop presented lower annual water consumption than that for coffee crop , what can be seen as an advantage in situations of water scarcity. However, the replacement of natural vegetation by su gar cane can contribute for warming th e environment, while when this occur with coffee crop there was noticed co oling conditions. The large scale modeling satisfactory results confirm the suitability of using MODIS products togeth er with weather stations to study the energy balance components in mixed agro-ecosystems under land-use and climate change conditions.

Task profiling : A task-Based approach to measuring the integration of ICT in the classroom

The measurement of ICT (information and communication technology) integration is emerging as an area of research interest with such systems as Education Queensland including it in their recently released list of research priorities. Studies to trial differing integration measurement instruments have taken place within Australia in the last few years, particularly Western Australia (Trinidad, Clarkson, & Newhouse, 2004; Trinidad, Newhouse & Clarkson, 2005), Tasmania (Fitzallen 2005) and Queensland (Finger, Proctor, & Watson, 2005). This paper will add to these investigations by describing an alternate and original methodological approach which was trialled in a small-scale pilot study conducted jointly by Queensland Catholic Education Commission (QCEC) and the Centre of Learning Innovation, Queensland University of Technology (QUT) in late 2005. The methodology described is based on tasks which, through a process of profiling, can be seen to be artefacts which embody the internal and external factors enabling and constraining ICT integration.

Survey design: Insights from a public sector ERP success story

Research on the impact of Information Systems (IS) reported in both academic literature and popular press has reported confounding results. Some studies have reported encouraging results of IS, while others have reported nil or detrimental results. The contradictory results of these research studies can be partially attributed to the weaknesses in survey instruments. In an attempt to increase the validity of conclusions of IS assessment studies, survey instrument design should follow a rigorous and scientific procedure. This paper illustrates key validity and reliability issues in measuring Information Systems performance, using examples from a study designed to assess Enterprise Resource Planning systems success. The article emphasizes on the importance of the survey method and the theoretical considerations of item derivation, scale development and item evaluation. Examples are provided from the ERP assessment study to supplement the readers understanding of the theoretical concepts of survey design.

Creating a therapeutic environment : a non-randomised controlled trial of a quiet time intervention for patients in acute care

Background: Noise is a significant barrier to sleep for acute care hospital patients, and sleep has been shown to be therapeutic for health, healing and recovery. Scheduled quiet time interventions to promote inpatient rest and sleep have been successfully trialled in critical care but not in acute care settings. Objectives: The study aim was to evaluate as cheduled quiet time intervention in an acute care setting. The study measured the effect of a scheduled quiet time on noise levels, inpatients’ rest and sleep behaviour, and wellbeing. The study also examined the impact of the intervention on patients’, visitors’ and health professionals’ satisfaction, and organisational functioning. Design: The study was a multi-centred non-randomised parallel group trial. Settings: The research was conducted in the acute orthopaedic wards of two major urban public hospitals in Brisbane, Australia. Participants: All patientsadmitted to the two wards in the5-month period of the study were invited to participate, withafinalsample of 299 participants recruited. This sample produced an effect size of 0.89 for an increase in the number of patients asleep during the quiet time. Methods: Demographic data were collected to enable comparison between groups. Data for noise level, sleep status, sleepiness and well being were collected using previously validated instruments: a Castle Model 824 digital sound level indicator; a three point sleep status scale; the Epworth Sleepiness Scale; and the SF12 V2 questionnaire. The staff, patient and visitor surveys on the experimental ward were adapted from published instruments. Results: Significant differences were found between the two groups in mean decibel level and numbers of patients awake and asleep. The difference in mean measured noise levels between the two environments corresponded to a ‘perceived’ difference of 2 to 1. There were significant correlations between average decibel level and number of patients awake and asleep in the experimental group, and between average decibel level and number of patients awake in the control group. Overall, patients, visitors and health professionals were satisfied with the quiet time intervention. Conclusions: The findings show that a quiet time intervention on an acute care hospital ward can affect noise level and patient sleep/wake patterns during the intervention period. The overall strongly positive response from surveys suggests that scheduled quiet time would be a positively perceived intervention with therapeutic benefit.

E-Government and the digital divide

Many governments world wide are attempting to increase accountability, transparency, and the quality of services by adopting information and communications technologies (ICTs) to modernize and change the way their administrations work. Meanwhile e-government is becoming a significant decision-making and service tool at local, regional and national government levels. The vast majority of users of these government online services see significant benefits from being able to access services online. The rapid pace of technological development has created increasingly more powerful ICTs that are capable of radically transforming public institutions and private organizations alike. These technologies have proven to be extraordinarily useful instruments in enabling governments to enhance the quality, speed of delivery and reliability of services to citizens and to business (VanderMeer & VanWinden, 2003). However, just because the technology is available does not mean it is accessible to all. The term digital divide has been used since the 1990s to describe patterns of unequal access to ICTs—primarily computers and the Internet—based on income, ethnicity, geography, age, and other factors. Over time it has evolved to more broadly define disparities in technology usage, resulting from a lack of access, skills, or interest in using technology. This article provides an overview of recent literature on e-government and the digital divide, and includes a discussion on the potential of e-government in addressing the digital divide.

Operationalizing the resource based view for nascent and young firms : developing scales for resource advantages and disadvantages

Principal Topic: It is well known that most new ventures suffer from a significant lack of resources, which increases the risk of failure (Shepherd, Douglas and Shanley, 2000) and makes it difficult to attract stakeholders and financing for the venture (Bhide & Stevenson, 1999). The Resource-Based View (RBV) (Barney, 1991; Wernerfelt, 1984) is a dominant theoretical base increasingly drawn on within Strategic Management. While theoretical contributions applying RBV in the domain of entrepreneurship can arguably be traced back to Penrose (1959), there has been renewed attention recently (e.g. Alvarez & Busenitz, 2001; Alvarez & Barney, 2004). This said, empirical work is in its infancy. In part, this may be due to a lack of well developed measuring instruments for testing ideas derived from RBV. The purpose of this study is to develop a measurement scales that can serve to assist such empirical investigations. In so doing we will try to overcome three deficiencies in current empirical measures used for the application of RBV to the entrepreneurship arena. First, measures for resource characteristics and configurations associated with typical competitive advantages found in entrepreneurial firms need to be developed. These include such things as alertness and industry knowledge (Kirzner, 1973), flexibility (Ebben & Johnson, 2005), strong networks (Lee et al., 2001) and within knowledge intensive contexts, unique technical expertise (Wiklund and Shepard, 2003). Second, the RBV has the important limitations of being relatively static and modelled on large, established firms. In that context, traditional RBV focuses on competitive advantages. However, newly established firms often face disadvantages, especially those associated with the liabilities of newness (Aldrich & Auster, 1986). It is therefore important in entrepreneurial contexts to expand to an investigation of responses to competitive disadvantage through an RBV lens. Conversely, recent research has suggested that resource constraints actually have a positive effect on firm growth and performance under some circumstances (e.g., George, 2005; Katila & Shane, 2005; Mishina et al., 2004; Mosakowski, 2002; cf. also Baker & Nelson, 2005). Third, current empirical applications of RBV measured levels or amounts of particular resources available to a firm. They infer that these resources deliver firms competitive advantage by establishing a relationship between these resource levels and performance (e.g. via regression on profitability). However, there is the opportunity to directly measure the characteristics of resource configurations that deliver competitive advantage, such as Barney´s well known VRIO (Valuable, Rare, Inimitable and Organized) framework (Barney, 1997). Key Propositions and Methods: The aim of our study is to develop and test scales for measuring resource advantages (and disadvantages) and inimitability for entrepreneurial firms. The study proceeds in three stages. The first stage developed our initial scales based on earlier literature. Where possible, we adapt scales based on previous work. The first block of the scales related to the level of resource advantages and disadvantages. Respondents were asked the degree to which each resource category represented an advantage or disadvantage relative to other businesses in their industry on a 5 point response scale: Major Disadvantage, Slight Disadvantage, No Advantage or Disadvantage, Slight Advantage and Major Advantage. Items were developed as follows. Network capabilities (3 items) were adapted from (Madsen, Alsos, Borch, Ljunggren & Brastad, 2006). Knowledge resources marketing expertise / customer service (3 items) and technical expertise (3 items) were adapted from Wiklund and Shepard (2003). flexibility (2 items), costs (4 items) were adapted from JIBS B97. New scales were developed for industry knowledge / alertness (3 items) and product / service advantages. The second block asked the respondent to nominate the most important resource advantage (and disadvantage) of the firm. For the advantage, they were then asked four questions to determine how easy it would be for other firms to imitate and/or substitute this resource on a 5 point likert scale. For the disadvantage, they were asked corresponding questions related to overcoming this disadvantage. The second stage involved two pre-tests of the instrument to refine the scales. The first was an on-line convenience sample of 38 respondents. The second pre-test was a telephone interview with a random sample of 31 Nascent firms and 47 Young firms (< 3 years in operation) generated using a PSED method of randomly calling households (Gartner et al. 2004). Several items were dropped or reworded based on the pre-tests. The third stage (currently in progress) is part of Wave 1 of CAUSEE (Nascent Firms) and FEDP (Young Firms), a PSED type study being conducted in Australia. The scales will be tested and analysed with a random sample of approximately 700 Nascent and Young firms respectively. In addition, a judgement sample of approximately 100 high potential businesses in each category will be included. Findings and Implications: The paper will report the results of the main study (stage 3 – currently data collection is in progress) will allow comparison of the level of resource advantage / disadvantage across various sub-groups of the population. Of particular interest will be a comparison of the high potential firms with the random sample. Based on the smaller pre-tests (N=38 and N=78) the factor structure of the items confirmed the distinctiveness of the constructs. The reliabilities are within an acceptable range: Cronbach alpha ranged from 0.701 to 0.927. The study will provide an opportunity for researchers to better operationalize RBV theory in studies within the domain of entrepreneurship. This is a fundamental requirement for the ability to test hypotheses derived from RBV in systematic, large scale research studies.

Sleeper [for laptop computer and live performer]

Sleeper is an 18'00" musical work for live performer and laptop computer which exists as both a live performance work and a recorded work for audio CD. The work has been presented at a range of international performance events and survey exhibitions. These include the 2003 International Computer Music Conference (Singapore) where it was selected for CD publication, Variable Resistance (San Francisco Museum of Modern Art, USA), and i.audio, a survey of experimental sound at the Performance Space, Sydney. The source sound materials are drawn from field recordings made in acoustically resonant spaces in the Australian urban environment, amplified and acoustic instruments, radio signals, and sound synthesis procedures. The processing techniques blur the boundaries between, and exploit, the perceptual ambiguities of de-contextualised and processed sound. The work thus challenges the arbitrary distinctions between sound, noise and music and attempts to reveal the inherent musicality in so-called non-musical materials via digitally re-processed location audio. Thematically the work investigates Paul Virilio’s theory that technology ‘collapses space’ via the relationship of technology to speed. Technically this is explored through the design of a music composition process that draws upon spatially and temporally dispersed sound materials treated using digital audio processing technologies. One of the contributions to knowledge in this work is a demonstration of how disparate materials may be employed within a compositional process to produce music through the establishment of musically meaningful morphological, spectral and pitch relationships. This is achieved through the design of novel digital audio processing networks and a software performance interface. The work explores, tests and extends the music perception theories of ‘reduced listening’ (Schaeffer, 1967) and ‘surrogacy’ (Smalley, 1997), by demonstrating how, through specific audio processing techniques, sounds may shifted away from ‘causal’ listening contexts towards abstract aesthetic listening contexts. In doing so, it demonstrates how various time and frequency domain processing techniques may be used to achieve this shift.

Measuring the quality of teaching in elementary school classrooms

This paper reviews the means by which teacher quality has been measured. It considers data sources such as students, peers, experts, and examines the psychometrics and scaleproperties of teacher quality assessment instruments with respect to reliability and validity. A list of items for possible inclusion in an elementary student focussed instrument is considered, together with the potential use of such an instrument in measuring teacher quality.