Molecular profiling of indoor microbial communities in moisture damaged and non-damaged buildings

Epidemiological studies have shown an elevation in the incidence of asthma, allergic symptoms and respiratory infections among people living or working in buildings with moisture and mould problems. Microbial growth is suspected to have a key role, since the severity of microbial contamination and symptoms show a positive correlation, while the removal of contaminated materials relieves the symptoms. However, the cause-and-effect relationship has not been well established and knowledge of the causative agents is incomplete. The present consensus of indoor microbes relies on culture-based methods. Microbial cultivation and identification is known to provide qualitatively and quantitatively biased results, which is suspected to be one of the reasons behind the often inconsistent findings between objectively measured microbiological attributes and health. In the present study the indoor microbial communities were assessed using culture-independent, DNA based methods. Fungal and bacterial diversity was determined by amplifying and sequencing the nucITS- and16S-gene regions, correspondingly. In addition, the cell equivalent numbers of 69 mould species or groups were determined by quantitative PCR (qPCR). The results from molecular analyses were compared with results obtained using traditional plate cultivation for fungi. Using DNA-based tools, the indoor microbial diversity was found to be consistently higher and taxonomically wider than viable diversity. The dominant sequence types of fungi, and also of bacteria were mainly affiliated with well-known microbial species. However, in each building they were accompanied by various rare, uncultivable and unknown species. In both moisture-damaged and undamaged buildings the dominant fungal sequence phylotypes were affiliated with the classes Dothideomycetes (mould-like filamentous ascomycetes); Agaricomycetes (mushroom- and polypore-like filamentous basidiomycetes); Urediniomycetes (rust-like basidiomycetes); Tremellomycetes and the family Malasseziales (both yeast-like basidiomycetes). The most probable source for the majority of fungal types was the outdoor environment. In contrast, the dominant bacterial phylotypes in both damaged and undamaged buildings were affiliated with human-associated members within the phyla Actinobacteria and Firmicutes. Indications of elevated fungal diversity within potentially moisture-damage-associated fungal groups were recorded in two of the damaged buildings, while one of the buildings was characterized by an abundance of members of the Penicillium chrysogenum and P. commune species complexes. However, due to the small sample number and strong normal variation firm conclusions concerning the effect of moisture damage on the species diversity could not be made. The fungal communities in dust samples showed seasonal variation, which reflected the seasonal fluctuation of outdoor fungi. Seasonal variation of bacterial communities was less clear but to some extent attributable to the outdoor sources as well. The comparison of methods showed that clone library sequencing was a feasible method for describing the total microbial diversity, indicated a moderate quantitative correlation between sequencing and qPCR results and confirmed that culture based methods give both a qualitative and quantitative underestimate of microbial diversity in the indoor environment. However, certain important indoor fungi such as Penicillium spp. were clearly underrepresented in the sequence material, probably due to their physiological and genetic properties. Species specific qPCR was a more efficient and sensitive method for detecting and quantitating individual species than sequencing, but in order to exploit the full advantage of the method in building investigations more information is needed about the microbial species growing on damaged materials. In the present study, a new method was also developed for enhanced screening of the marker gene clone libraries. The suitability of the screening method to different kinds of microbial environments including biowaste compost material and indoor settled dusts was evaluated. The usability was found to be restricted to environments that support the growth and subsequent dominance of a small number microbial species, such as compost material.

Kymmenen teollisesti merkittävän puulajin kuoriuutteiden mahdollisuudet tuholaistorjunnassa

Metsäteollisuudesta kertyy vuosittain suuria määriä ylijäämämateriaalia, kuten puun kuorta ja oksia.Ylimääräinen aines käytetään pääasiassa energiantuotantoon, mutta uusia soveltamismahdollisuuksia kaivataan. Kuoren on havaittu olevan potentiaalinen lähde monille bioaktiivisille yhdisteille, joille olisi käyttöä esimerkiksi lääke- ja kemianteollisuudessa sekä maa-, metsä- ja puutarhatuotannon tuholaistorjunnassa. Tutkimus on osa Euroopan Unionin rahoittamaa ForestSpeCs-projektia, jonka tarkoituksena on selvittää metsäteollisuuden ylijäämämateriaalien vaihtoehtoisia käyttötapoja. Valittujen kymmenen teollisesti merkittävän pohjoisen puulajin (Abies nephrolepis, Betula pendula, Larix decidua, L. gmelinii, L. sibirica, Picea abies, P. ajanensis, P. pumila, Pinus sylvestris, Populus tremula) kuoresta uutettujen aineiden soveltuvuutta syönninestoaineeksi testattiin kaaliperhosen (Pieris brassicae L.) ja krysanteemiyökkösen (Spodoptera littoralis Boisduval) toukilla sekä osittain sinappikuoriaisella (Phaedon cochloreae Fabricius) ja idänlehtikuoriaisella (Agelastica alni L.). Uutteet valmistettiin yhteistyössä projektin ryhmien avulla tai itsenäisesti erilaisin menetelmin. Testaukset tehtiin laboratorio-oloissa käyttäen lehtikiekkojen valintabiotestiä sekä karkeilla uutteilla että niistä erotelluilla yksittäisillä yhdisteillä. Tehdyistä mittauksista laskettiin syönninestoindeksit (FDI). Tulosten perusteella lähes kaikki testatut uutteet vaikuttivat ainakin jossain määrin kohdehyönteisen syöntikäyttäytymiseen. Hieman yli puolet kaaliperhosella testatuista 46 uutteesta aiheuttivat yli 50 % syönnineston eli kaaliperhonen suosi kontrollilehtiä uutteella käsiteltyjä todennäköisemmin. Krysanteemiyökkösellä yli 50 %:n syönnineston aiheuttivat vain seitsemän testatuista 56 uutteesta. Lisäksi kolme uutetta lisäsi käsiteltyjen kiekkojen syöntiä merkittävästi. Idänlehtikuoriaistoukat ja -aikuiset karttoivat erityisesti abietiinihapolla käsiteltyjä lehtiä. Sinappikuoriaisella testatut uutteet toimivat myös lupaavasti. Testattujen puulajien kuoresta on mahdollista uuttaa biologisesti aktiivisia yhdisteitä, mutta tuholaistorjunnan kannalta oikeiden pitoisuuksien ja tehokkaiden uuttomenetelmien löytäminen vaatii jatkotutkimuksia. Kuoren sisältämien yhdisteiden laatu ja määrä vaihtelevat monien tekijöiden, kuten ympäristön ja genetiikan vaikutuksesta. Hyönteisten sietokyky vaihtelee myös paljon lajeittain ja yksilöidenkin välillä on eroja. Uutteista valmistettavia torjunta-aineita olisi kuitenkin mahdollista sisällyttää esimerkiksi integroituun torjuntaan muiden menetelmien rinnalle tulevaisuudessa.

Comparison of the effect of processing parameters and degradation on the DC and microwave properties of thin films and polycrystalline bulk high-Tc superconducting materials

The sharp increase in microwave power loss (the reverse of what has previously been reported) at the transition temperature in high-Tc superconducting systems such as YBaCu oxide (polycrystalline bulk and thin films obtained by the laser ablation technique) and BiPbSrCaCu oxide is reported. The differences between DC resistivity ( rho ) and the microwave power loss (related to microwave surface resistance) are analysed from the data obtained by a simultaneous measurement set-up. The influence of various parameters, such as preparation conditions, thickness and aging of the sample and the probing frequency (6-18 GHz), on the variation of microwave power loss with temperature is outlined.

Kansan raittiudeksi ja kotien onneksi : Naisten kieltolakimielipiteet ja toiminta kieltolain puolesta ja sitä vastaan 1919 - 1932

It is often maintained that the Prohibition Act (in force from 1 June 1919 to 5 April 1932) still influences both the Finnish alcohol policy and notions about alcohol. This study focuses on the development of women s opinions concerning Prohibition in Finland. What role did the formulation and expression of women s opinions and women's actions play in the final outcome of the Prohibition Act? What do the debate on Prohibition and women s activities for and against the legislation tell us about the status and possibilities of women to exert influence in the Finnish society of the Prohibition era? Women s opinions are particularly interesting since they deviated radically from what has generally been assumed. It was expected that the referendum of 1931 would result in a resounding vote of 100% in favour of Prohibition, but the outcome was a majority vote against it. Over 65% of the women who cast their vote in the referendum wanted a full repeal of Prohibition. The study approaches the history of Prohibition by combining methods and theories of the history of mentalities and social history with gender history. Women are examined as a heterogeneous group with dissimilar objectives and differing ways of acting and thinking. The research material consists of press materials, archival materials from organisations, personal materials and statistics from the Prohibition period. Both discourses and practices are examined; the object of the research is best described by Michel Foucault's concept of dispositif. When participating in the public debate on Prohibition, women based their right to express their opinions and take part in action on an ideological continuum spanning a hundred years, according to which home and family were central areas of women s interest. This idea was linked to questions of morality and social policy. On the other hand, women presented themselves as working taxpayers, voters and equal citizens. The most crucial issue in women's discussions was whether Prohibition improved or worsened the temperance of fathers, husbands and sons. The dichotomies town dweller - countryside dweller, Swedish-speaking Finnish-speaking, and middle class - working class were highly significant backgrounds both as factors dividing women and in public discussions regarding Prohibition. The 1931 referendum showed that the lines of demarcation drawn during the preceding debate did not materialise in political action in line with these dichotomies: the dispositif did not correspond to the discourse. Contrary to what was expressed in public, a great number of women among the labour and rural classes, among inland inhabitants and among Finnish-speakers were also against Prohibition. The media and organisations defended temperance and Prohibition almost until the end of the Prohibition era. This discourse was in conflict with the discourse of everyday conversations and practices in which alcohol was present.

Trade Blocs and the Cold War : The CMEA and the EC challenge, 1969-1976

The coherence of the Soviet bloc was seriously tested at the turn of the 1970s, as the Soviet Union and its allies engaged in intensive negotiations over their relations with the European Communities (EC). In an effort to secure their own national economic interests many East European countries began independent manoeuvres against the wishes of their bloc leader. However, much of the intra-bloc controversy was kept out of the public eye, as the battle largely took place behind the scenes, within the organisation for economic cooperation, the Council for Mutual Economic Assistance (CMEA). The CMEA policy-making process vis-à-vis the EC is described in this study with reference to primary archival materials. This study investigates the negotiating positions and powers of the CMEA member states in their efforts to deal with the economic challenge created by the progress of the EC, as it advanced towards the customs union. This entails an analysis of the functioning principles and performance of the CMEA machinery. The study traces the CMEA negotiations that began in 1970 over its policy toward the EC. The policy was finally adopted in 1974, and was followed by the first official meeting between the two organisations in early 1975. The story ends in 1976, when the CMEA s efforts to enter into working relations with the EC were seemingly frustrated by the latter. The first major finding of the study is that, contrary to much of the prior research, the Soviet Union was not in a hegemonic position vis-à-vis its allies. It had to use a lot of its resources to tame the independent manoeuvring of its smaller allies. Thus, the USSR was not the kind of bloc leader that the totalitarian literature has described. Because the Soviet Union had to spend so much attention on its own bloc-politics, it was not able to concentrate on formulating a policy vis-à-vis the EC. Thus, the Soviet leadership was dependent on its allies in those instances when the socialist countries needed to act as a bloc. This consequently opened up the possibility for the USSR s allies to manoeuvre. This study also argues that when the CMEA did manage to find a united position, it was a force that the EC had to reckon with in its policy-making. This was particularly the case in the implementation of the EC Common Commercial Policy. The other main finding of the study is that, although it has been largely neglected in the previous literature on the history of West European integration, the CMEA did in fact have an effect on EC decision-making. This study shows how for political and ideological reasons the CMEA members did not acknowledge the EC s supranational authority. Therefore the EC had no choice but to refrain from implementing its Common Commercial Policy in full.

A Feature-Based Solution to Forward Problem in Electrical Capacitance Tomography of Conductive Materials

A new feature-based technique is introduced to solve the nonlinear forward problem (FP) of the electrical capacitance tomography with the target application of monitoring the metal fill profile in the lost foam casting process. The new technique is based on combining a linear solution to the FP and a correction factor (CF). The CF is estimated using an artificial neural network (ANN) trained using key features extracted from the metal distribution. The CF adjusts the linear solution of the FP to account for the nonlinear effects caused by the shielding effects of the metal. This approach shows promising results and avoids the curse of dimensionality through the use of features and not the actual metal distribution to train the ANN. The ANN is trained using nine features extracted from the metal distributions as input. The expected sensors readings are generated using ANSYS software. The performance of the ANN for the training and testing data was satisfactory, with an average root-mean-square error equal to 2.2%.

Self-assembled composite nano-materials exploiting a thermo reversible n-acene fibrillar scaffold and organic-capped ZnO nanoparticles

An organic-inorganic composite material is obtained by self-assembly of 2,3-didecyloxy-anthracene (DDOA), an organogelator of butanol, and organic-capped ZnO nanoparticles (NPs). The ligand 3, 2,3-di(6-oxy-n-hexanoic acid)-anthracene, designed to cap ZnO and interact with the DDOA nanofibers by structural similarity, improves the dispersion of the NPs into the organogel. The composite material displays mechanical properties similar to those of the pristine DDOA organogel, but gelates at a lower critical concentration and emits significantly less, even in the presence of very small amounts of ZnO NPs. The ligand 3 could also act as a relay to promote the photo-induced quenching process.

Absorption-resorption heating cycles with the new working pairs R21-NMP and R21-DMA

The new working pairs, R21-NMP and R21-DMA, find potential application as working pairs for the single stage Resorption Heat Pump (RHP) and the Resorption Heat Transformer (RHT) cycles. A thermodynamic cycle analysis with these pairs shows that single stage RHPs have high COPs in their entire range of operation. RHTs show higher temperature boosts (up to 47 K) than the simple absorption heat transformers. Absorber temperatures of up to 400 K can be achieved in a single stage RHT system using R21 as the refrigerant. However, absorption-resorption systems have inherent limitations on the range of operating temperatures. Besides, they necessitate a higher pump work as compared to simple single stage absorption heating systems.

A comparative-study of vapor-compression refrigeration working fluids, in the wake of the montreal protocal

A comparative study has been carried out of R-12, 22, 125, 134a, 152a, 218, 245, 500, 502, 507 and 717 as working fluids in a vapour-compression refrigeration system. Two performance parameters were defined, which are expressed in reduced quantities for a corresponding-states comparison of these refrigerants in the temperature range -20 to 50-degrees-C. One is based on the product of temperature drop to pressure penalty ratio and the available volumetric heat of vaporisation at the evaporator; the other considers the effect of isentropic compression in the ideal gas state. It was shown that R-125, 507 and 218 could be better alternatives to R-12 than R-134a. Among these, R-218 has a lower maximum cycle pressure.

Chemical Approaches to the Design of Oxide Materials.

Chemical methods of synthesis play a crucial role in designing and discovering new and novel materials and in providing less cumbersome methods for preparing known materials. Chemical methods also enable the synthesis of metastable materials which are otherwise difficult to prepare. In this presentation, the various innovative chemical methods of synthesising oxide materials will be briefly reviewed with emphasis on soft-chemical routes. Electrochemical synthesis, ion-exchange method, alkali-flux method and some of the interaction reactions will be highlighted, besides topochemical aspects of solid state synthesis. Cuprate superconductors as well as intergrowth structures will also be examined.

Combustion synthesis of oxide materials for nuclear waste immobilization

Oxide materials like perovskite, zirconolite, hollandite, pyrochlore, NASICON and sphene which are used for nuclear waste immobilization have been prepared by a solution combustion process. The process involves the combustion of stoichiometric amount of corresponding metal nitrates and carbohydrazide/tetraformyl trisazine/diformyl hydrazide at 450 degrees C. The combustion products have been characterized using powder X-ray diffraction, infrared spectroscopy, and Si-29 MAS-NMR. The fine particle nature of the combustion derived powders has been studied using density, particle size, BET surface area measurements and scanning electron microscopy. Sintering of combustion derived powder yields 85-95% dense ceramics in the temperature range 1000 degrees-1300 degrees C.

Controlled combustion synthesis and properties of fine-particle NASICON materials

Fine-particle NASICON materials, Na1+xZr2P3-xSixO12 (where x = 0.0, 0.5, 1.0, 1.5, 2.0 and 2.5), have been prepared by controlled combustion of an aqueous solution containing stoicthiometric amounts of sodium nitrate, zirconyl nitrate, ammonium perchlorate, diammonium hydrogen phosphate, fumed silica and carbonohydrazide. Formation of NASICON has been confirmed by powder XRD, Si-29 NMR and IR spectroscopy. These NASICON powders are fine (average agglomerate size 5-12 mum) with a surface area varying from 8 to 30 m2 g-1. NASICON powders pelletized and sintered at 1100-1200-degrees-C for 5 h achieved 90-95% theoretical density and show fine-grain microstructure. The coefficient of thermal expansion of sintered NASICON compact was measured up to 500-degrees-C and changes f rom -3.4 x 10(-6) to 4.1 x 10(-6) K-1. The conductivity of Sintered Na3Zr2PSi2O12 compact at 300-degrees-C is 0.236 OMEGA-1 cm-1.