Genetic transformation of Eucalyptus camaldulensis by agrobalistic method

Eucalyptus stands in the setting of worldwide forestry due to its adaptability, rapid growth, production of high-quality and low cost of wood pulp fibers. The eucalyptus convetional breeding is impaired mainlly by the long life cycle making the genetic transformation systems an important tool for this purpose. However, this system requires in vitro eficient protocols for plant induction, regeneration and seletion, that allow to obtain transgenic plants from the transformed cell groups. The aim of this work was to evaluate the callus formation and to optimize the leaves and callus genetic transformation protocol by using the Agrobacterium tumefaciens system. Concerning callus formation, two different culture media were evaluated: MS medium supplemented with auxin, cytokinin (M1) and the MS medium with reduced nitrogen concentration and supplemented with auxin, cytokinin coconut water (M2). To establish the leave genetic transformation, those were exposed to agrobiolistics technique (gene gun), to tissue injury, and A. tumesfasciens EHA 105 contening the vetor pCambia 3301 (35S::GUS::NOS), for gene transference and to establish the callus transformation thoses were exposed only to A. tumefasciens. For both experiments, the influence of different infection periods was evaluated. The M2 medium provided the best values for callus sizea and fresh and dry weight. The leaves genetic transformation using the agrobiolistics technique was effective, the gus gene transient expression could be observed. No significant differences were obtained in the infection periods (4, 6 and 8 minutes). The callus genetic transformation with A. tumefaciens also promotend the gus gene transient expression on the callus co-cultiveted for 15 e 30 minutes. The transformed callus was transfered to a regeneration and selection medium and transformed plants were obtained.

RELATIONSHIP BETWEEN LIGNIN CONTENT AND QUALITY OF Pinus taeda SEEDLINGS1

ABSTRACT The essay objective was to correlate lignin content resulting from tigmomorphogenesis induced by stem swaying with survival and post-planting growth of P. taeda seedlings. Seedlings were subjected to daily frequencies (0, 5, 10, 20 and 40 movements) of stem swaying for 60 days. By the end of the treatments, we determined lignin content of below and aboveground seedling tissues. Four replicates per treatment were planted in a area cultivated with pines. Ninety days after planting, survival and increments of seedling height, stem diameter and stem volume were quantified. Application of 20 stem swayings increased lignin in both below and aboveground plant tissues. Outplanted seedling survival was reduced with 40 stem swayings while growth increments were increased with both 10 and 20 stem swayings. Lignin content from belowground plant tissues was positively correlated with outplanted seedling survival while lignin from aboveground tissues correlated with height and stem volume increments. P. taeda seedlings with higher lignin content have higher survival chances after planting.

Development of capacitive sensor for measuring soil water content

The irrigation management based on the monitoring of the soil water content allows for the minimization of the amount of water applied, making its use more efficient. Taking into account these aspects, in this work, a sensor for measuring the soil water content was developed to allow real time automation of irrigation systems. This way, problems affecting crop yielding such as irregularities in the time to turn on or turn off the pump, and excess or deficit of water can be solved. To develop the sensors were used stainless steel rods, resin, and insulating varnish. The sensors measuring circuit was based on a microcontroller, which gives its output signal in the digital format. The sensors were calibrated using soil of the type “Quartzarenic Neosoil”. A third order polynomial model was fitted to the experimental data between the values of water content corresponding to the field capacity and the wilting point to correlate the soil water content obtained by the oven standard method with those measured by the electronic circuit, with a coefficient of determination of 93.17%, and an accuracy in the measures of ±0.010 kg kg-1. Based on the results, it was concluded that the sensor and its implemented measuring circuit can be used in the automation process of irrigation systems.

Jatropha seed oil content and yield under different irrigation and potassium fertilization levels

The aim of this research was to evaluate the effects of different irrigation depths and potassium dosages, of Jatropha seed oil content and yield. The experimental design used was randomized blocks, in split-plots, with four replicates. The treatments were four water depths (plots) and four potassium dosages (subplots) applied through irrigation water. The water depths were applied based on the percentage of accumulated evaporation of a Class A (ECA) tank and of rainfall, as following: L0 = without irrigation, L40, L80 and L120, representing 40, 80 and 120% of the balance, respectively. The potassium dosages were K30, K60, K90 and K120 (30, 60, 90 and 120kg ha-1 of potassium, respectively). The oil extraction of samples was done through chemical extraction by organic solvent. The seeds used in this test were from the sampling of two seed productions from 2009, second year of crop production. It was possible to observe that irrigation use increased oil yield and decreased the oil content of Jatropha seed. Potassium fertilization did not influence oil content and yield. There was a relative increase of efficiency in water use producing oil until certain water depth, and after that there was a decrease.

Soil penetration resistance in a rhodic eutrudox affected by machinery traffic and soil water content

Soil compaction caused by machinery traffic reduces crop yields. This study aimed to evaluate the effects of intensive traffic, and the soil water content, on the soil penetration resistance (PR) of a Rhodic Eutrudox (Distroferric Red Latosol, Brazilian Classification), managed under no-tillage (NT). The experiment consisted of six treatments: NT with recent chiseling, NT without additional compaction, and NT with additional compaction by 4, 8, 10 and 20 passes of a harvester with a weight of 100 kN (70 kN on the front axle). Undisturbed soil samples were collected at 5.5-10.5 cm and 13.5-18.5 cm depth to quantify the soil bulk density (BD). The PR was assessed in four periods, using an impact penetrometer, inserted in the soil to a depth of 46 cm. The effect of traffic intensities on the PR was small when this variable was assessed with the soil in the plastic consistency. Differences in PR among treatments increased as the soil water content decreased. The increase in the values of PR and BD was higher in the first passes, but the increase in the number of traffics resulted in deeper soil compaction. The machinery traffic effects on PR are better characterized in the friable soil consistency.

Construction and calibration of TDR probes for volumetric water content estimation in a Distroferric Red Latosol

The determination of volumetric water content of soils is an important factor in irrigation management. Among the indirect methods for estimating, the time-domain reflectometry (TDR) technique has received a significant attention. Like any other technique, it has advantages and disadvantages, but its greatest disadvantage is the need of calibration and high cost of acquisition. The main goal of this study was to establish a calibration model for the TDR equipment, Trase System Model 6050X1, to estimate the volumetric water content in a Distroferric Red Latosol. The calibration was carried out in a laboratory with disturbed soil samples under study, packed in PVC columns of a volume of 0.0078m³. The TDR probes were handcrafted with three rods and 0.20m long. They were vertically installed in soil columns, with a total of five probes per column and sixteen columns. The weightings were carried out in a digital scale, while daily readings of dielectric constant were obtained in TDR equipment. The linear model θν = 0.0103 Ka + 0.1900 to estimate the studied volumetric water content showed an excellent coefficient of determination (0.93), enabling the use of probes in indirect estimation of soil moisture.

Coverage mobilization in the sowing line and its influence on temperature and water content and on maize emergence

Straw on sowing line modifies seed germination environment regarding temperature and water content. Given these considerations, the aim of this study was to evaluate different mechanisms for coverage mobilization on the sowing line and their effect on germination environment of maize seeds, mainly in relation to the dynamics of straw in the seedbed, water content and soil temperature. Treatments consisted on the combination of two mechanisms at front of furrow opener, composed of cutting disc and row cleaners, with three mechanisms behind the seed furrower for returning the soil, consisting of three covering mechanisms, commercial and prototype models. It was found that straw presence on the surface of sowing line contributed to germination of maize seeds, maintenance of temperature and soil water content. The cutting disc treatment, associated with prototype, introduced percentages of water content near the ones in bottom layer, and this soil water content was 29.7% with 93.75% of straw coverage and deeper seeding depth, granting better conditions for seed germination. However, the straw coverage removal on soil by the row cleaners and its low sowing depth caused water loss in the lines resulting in great reduction of the emergence speed index in maize seedlings.

Mobile learning and video experience in delivering digital content

In recent years, the worldwide distribution of smartphone devices has been growing rapidly. Mobile technologies are evolving fast, a situation which provides new possibilities for mobile learning applications. Along with new delivery methods, this development enables new concepts for learning. This study focuses on the effectiveness and experience of a mobile learning video promoting the key features of a specific device. Through relevant learning theories, mobile technologies and empirical findings, the thesis presents the key elements for a mobile learning video that are essential for effective learning. This study also explores how previous experience with mobile services and knowledge of a mobile handset relate to final learning results. Moreover, this study discusses the optimal delivery mechanisms for a mobile video. The target group for the study consists of twenty employees of a Sanoma Company. The main findings show that the individual experience of learning and the actual learning results may differ and that the design for certain video elements, such as sound and the presentation of technical features, can have an impact on the experience and effectiveness of a mobile learning video. Moreover, a video delivery method based on cloud technologies and HTML5 is suggested to be used in parallel with standalone applications.

A Farewell to Flat Biology. Three-dimensional Cell Culture Models in Cancer Drug Target Identification and Validation

Cells of epithelial origin, e.g. from breast and prostate cancers, effectively differentiate into complex multicellular structures when cultured in three-dimensions (3D) instead of conventional two-dimensional (2D) adherent surfaces. The spectrum of different organotypic morphologies is highly dependent on the culture environment that can be either non-adherent or scaffold-based. When embedded in physiological extracellular matrices (ECMs), such as laminin-rich basement membrane extracts, normal epithelial cells differentiate into acinar spheroids reminiscent of glandular ductal structures. Transformed cancer cells, in contrast, typically fail to undergo acinar morphogenic patterns, forming poorly differentiated or invasive multicellular structures. The 3D cancer spheroids are widely accepted to better recapitulate various tumorigenic processes and drug responses. So far, however, 3D models have been employed predominantly in the Academia, whereas the pharmaceutical industry has yet to adopt a more widely and routine use. This is mainly due to poor characterisation of cell models, lack of standardised workflows and high throughput cell culture platforms, and the availability of proper readout and quantification tools. In this thesis, a complete workflow has been established entailing well-characterised 3D cell culture models for prostate cancer, a standardised 3D cell culture routine based on high-throughput-ready platform, automated image acquisition with concomitant morphometric image analysis, and data visualisation, in order to enable large-scale high-content screens. Our integrated suite of software and statistical analysis tools were optimised and validated using a comprehensive panel of prostate cancer cell lines and 3D models. The tools quantify multiple key cancer-relevant morphological features, ranging from cancer cell invasion through multicellular differentiation to growth, and detect dynamic changes both in morphology and function, such as cell death and apoptosis, in response to experimental perturbations including RNA interference and small molecule inhibitors. Our panel of cell lines included many non-transformed and most currently available classic prostate cancer cell lines, which were characterised for their morphogenetic properties in 3D laminin-rich ECM. The phenotypes and gene expression profiles were evaluated concerning their relevance for pre-clinical drug discovery, disease modelling and basic research. In addition, a spontaneous model for invasive transformation was discovered, displaying a highdegree of epithelial plasticity. This plasticity is mediated by an abundant bioactive serum lipid, lysophosphatidic acid (LPA), and its receptor LPAR1. The invasive transformation was caused by abrupt cytoskeletal rearrangement through impaired G protein alpha 12/13 and RhoA/ROCK, and mediated by upregulated adenylyl cyclase/cyclic AMP (cAMP)/protein kinase A, and Rac/ PAK pathways. The spontaneous invasion model tangibly exemplifies the biological relevance of organotypic cell culture models. Overall, this thesis work underlines the power of novel morphometric screening tools in drug discovery.

Leda förändring genom relationer, processer och kultur

Forskningens syfte var att bidra med en ny kunskapssyntes om vad det innebär att leda förändring ur ett vårdvetenskapligt perspektiv. Vårdledaren har, speciellt vid större förändringar inom organisationen, en stor betydelse för hur vårdandet förvaltas genom att hålla den vårdande traditionen levande och genom formningen av den vårdande kulturen och vårdgemenskapen. Den övergripande hermeneutiska forskningsansatsen med tillämpning av metodologisk triangulering har influerats av Gadamers, Ricoeurs och Ödmans syn på hermeneutik med förståelse och förklaring som kompletterar varandra. Forskningens övergripande frågeställning ”Vad innebär det att leda förändring ur ett vårdvetenskapligt perspektiv?” förankrades i de fyra underliggande frågeställningarna. Den första frågeställningen berörde meningsinnehållet i begreppet förändring samt dess gestaltning. Metoden var en hermeneutisk begreppsbestämning på en ontologisk och kontextuell nivå enligt Koorts metod för begreppsbestämning. Genom en personalenkät undersöktes personalens åsikter (totalt 597 personer) om den kommande fusionen och förändringen samt deras förväntningar på ledarna under förändringsprocessen för att få svar på vad förutsättningarna var för en förändring eller förändringsprocess med avsedda mål och effekter. Svaret på hur vårdledaren och dennes uppgifter gestaltades vid en förändring samt hur vårdledarna uppfattade förändring och den kommande förändringsprocessen erhölls genom djupintervjuer med vårdledare (17). Av resultatet framgår att vårdledaren leder förändring genom att leda relationer, processer och kultur och genom ett stödjande, reflekterande och kulturbärande ledarskap med syftet att åstadkomma en verklig och hållbar förändring. För att åstadkomma en verklig och hållbar förändring, dvs. en inre omgestaltning och omdaning som vardande, förutsätts dock att både tankemönster och handlanden förändras. Riktningen och insatserna för förändringen skall ha sin grund i en tydlig och meningsfull målsättning och vision utgående från en gemensam värdegrund. En arena för dialog borde utvecklas så att förändringens liksom även vårdandets vision och mission förankras och utvecklas till handling och förändring. Vårdledarens primära uppgift eller mission var att tillhandahålla varje individuell patient en god vård. Den primära missionen var med andra ord att med ansvarsfullhet tjäna vårdandet sak utgående från ett etiskt förhållningssätt. I tjänande av vårdandets sak fanns dock en tillit till att förändringen gagnar patienten och hans eller hennes vård, men vårdledarnas anpassning till förändringen var utan djupare engagemang. Vårdledarna kände även en oro för sitt uppdrag som vårdledare, vårdarbetets ställning och mandatet som patientens advokat. Vårdledaren är också en kulturbärare, vilket innebär att även kulturen har betydelse under en förändringsprocess. Genom att leda kulturen skapar vårdledaren en öppen, bekräftande och evidensbaserad atmosfär med centrala värderingar som ger uttryck för den rådande andan och kulturen.

Europeana content priorities

David Smithin esitys Europeana työpajassa 20.11.2012 Helsingissä.

Suomalaisen musiikkiteollisuuden murros

Tämä tutkimus on kvalitatiivinen monitapaustutkimus, jossa tutkitaan suomalaisen musiikkiteollisuuden arvoketjun sisältöä ja sen muutoksia vuosituhannen vaihteen jälkeisenä aikana. Tutkimuksen tavoitteena on selvittää millainen on suomalaisen musiikkiteollisuuden arvoketjun sisältö nykyisin ja miten se on muuttunut musiikkiteollisuuden nykyisen murroksen myötä. Nykyinen murrostilanne johtuu pääosin fyysisten äänitteiden myyntimäärien laskusta ja teknologian kehityksestä. Äänitteiden myynnistä saatavien tulovirtojen pienennyttyä monet teollisuudenalan toimijat ovat joutuneet tehostamaan toimintaansa, ja niiden roolit ovat jatkuvan muutoksen alla. Teknologian kehityksen myötä teollisuudenalalle on tullut myös uusia toimijoita, jotka ovat mahdollistaneet uusia toimintatapoja ja ansaintalogiikoita.

Content marketing and the significance of corporate branding

Tämän tutkielman tavoite on tutkia vahvan brandin merkitystä ja syitä, miksi yritykset käyttävät sisältömarkkinointia brandin rakentamisessa, sekä selvittää mitkä ovat yritysten sisältömarkkinointi-investointien tavoitteet, odotetut seuraukset ja koetut hyödyt ja tulokset. Teoriaosassa esitetään empiriaosaa varten tarvittava akateeminen taustatutkimustieto. Empiria on toteutettu puoli-struktroiduilla kahdenkeskisillä puhelinhaastatteuilla. Haastateltavina ovat työn toimeksiantajan Calcus Kustannus Oy:n viisi asiakasta. Näiden yritysten liikevaihto vaihtelee 23-75M€ välillä, ja yritykset toimivat pääosin suomen B2B yritysmarkkinoilla. Haastateltavat henkilöt ovat yrityksissä vastuussa markkinointipäätöksistä. Tulokset osoittavat, että vahvalla brandilla on erittäin suuri merkitys yrityksen kasvun ja menestyksen kannalta, ja että yritykset käyttävät sisältömarkkinointia brandin rakentamisessa, koska se kasvattaa brandipääomaa tehokkaasti. Sisältömarkkinoinnilla yritykset pyrkivät kasvttamaan heidän asiakkaidensa branditietoisuutta ja brandiuskollisuutta, sekä brandinsa uskottavuutta jakamalla aidosti kiinnostavaa ja lisäarvoa tuottavaa sisältöä. Lisäksi yrityksen asiantuntija-, sekä mielipidejohtajaroolin vahvistaminen koettiin erittäin tärkeäksi. Sisältömarkkinoinnin koetaan olevan brandin rakentamisessa tehokkaampaa kuin traditionaalinen markkinointi, minkä vuoksi yritykset tulevat kasvattamaan sen osuutta markkinointisuunnitelmissaan tulevaisuudessa.

Adult education policy in the European Union during the Lisbon decade : the shift to vocational adult learning and work skills matching

This doctoral dissertation investigates the adult education policy of the European Union (EU) in the framework of the Lisbon agenda 2000–2010, with a particular focus on the changes of policy orientation that occurred during this reference decade. The year 2006 can be considered, in fact, a turning point for the EU policy-making in the adult learning sector: a radical shift from a wide--ranging and comprehensive conception of educating adults towards a vocationally oriented understanding of this field and policy area has been observed, in particular in the second half of the so--called ‘Lisbon decade’. In this light, one of the principal objectives of the mainstream policy set by the Lisbon Strategy, that of fostering all forms of participation of adults in lifelong learning paths, appears to have muted its political background and vision in a very short period of time, reflecting an underlying polarisation and progressive transformation of European policy orientations. Hence, by means of content analysis and process tracing, it is shown that the new target of the EU adult education policy, in this framework, has shifted from citizens to workers, and the competence development model, borrowed from the corporate sector, has been established as the reference for the new policy road maps. This study draws on the theory of governance architectures and applies a post-ontological perspective to discuss whether the above trends are intrinsically due to the nature of the Lisbon Strategy, which encompasses education policies, and to what extent supranational actors and phenomena such as globalisation influence the European governance and decision--making. Moreover, it is shown that the way in which the EU is shaping the upgrading of skills and competences of adult learners is modeled around the needs of the ‘knowledge economy’, thus according a great deal of importance to the ‘new skills for new jobs’ and perhaps not enough to life skills in its broader sense which include, for example, social and civic competences: these are actually often promoted but rarely implemented in depth in the EU policy documents. In this framework, it is conveyed how different EU policy areas are intertwined and interrelated with global phenomena, and it is emphasised how far the building of the EU education systems should play a crucial role in the formation of critical thinking, civic competences and skills for a sustainable democratic citizenship, from which a truly cohesive and inclusive society fundamentally depend, and a model of environmental and cosmopolitan adult education is proposed in order to address the challenges of the new millennium. In conclusion, an appraisal of the EU’s public policy, along with some personal thoughts on how progress might be pursued and actualised, is outlined.