Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Reforma a seco de metano com catalisadores Ni/MCM-41 sintetizados a partir de fontes alternativas de sílica

The production of synthesis gas has received renewed attention due to demand for renewable energies to reduce the emissions of gases responsible for enhanced greenhouse effect. This work was carried out in order to synthesize, characterize and evaluate the implementation of nickel catalysts on MCM-41 in dry reforming reactions of methane. The mesoporous molecular sieves were synthesized using as silica sources the tetraethyl orthosilicate (TEOS) and residual glass powder (PV). The sieves were impregnated with 10% nickel to obtain the metallic catalysts (Ni/MCM-41). These materials were calcined and characterized by Thermogravimetric Analysis (TG), Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Temperature-Programmed Reduction (TPR) and N2 Adsorption/Desorption isotherms (BET/BJH). The catalytic properties of the samples were evaluated in methane dry reforming with CO2 in order to produce synthesis gas to be used in the petrochemical industry. The materials characterized showed hexagonal structure characteristic of mesoporous material MCM-41 type, being maintained after impregnation with nickel. The samples presented variations in the specific surface area, average volume and diameter of pores based on the type of interaction between the nickel and the mesoporous support. The result of the the catalytic tests showed conversions about 91% CO2, 86% CH4, yelds about 85% CO and 81% H2 to Ni/MCM-41_TEOS_C, and conversions about 87% CO2, 82% CH4, yelds about 70% CO and 59% H2 to Ni/MCM-41_PV_C. The similar performance confirms that the TEOS can be replaced by a less noble materials

Filmes formados pelo copolímero SEBS e nanopartículas de óxidos de ferro : preparação e caracterização

Dissertação (mestrado)—Universidade de Brasília, Instituto de Física, Programa de Pós-Graduação em Física, 2016.

Mixed Spatial and Nonspatial Problems in Location Based Services

With hundreds of millions of users reporting locations and embracing mobile technologies, Location Based Services (LBSs) are raising new challenges. In this dissertation, we address three emerging problems in location services, where geolocation data plays a central role. First, to handle the unprecedented growth of generated geolocation data, existing location services rely on geospatial database systems. However, their inability to leverage combined geographical and textual information in analytical queries (e.g. spatial similarity joins) remains an open problem. To address this, we introduce SpsJoin, a framework for computing spatial set-similarity joins. SpsJoin handles combined similarity queries that involve textual and spatial constraints simultaneously. LBSs use this system to tackle different types of problems, such as deduplication, geolocation enhancement and record linkage. We define the spatial set-similarity join problem in a general case and propose an algorithm for its efficient computation. Our solution utilizes parallel computing with MapReduce to handle scalability issues in large geospatial databases. Second, applications that use geolocation data are seldom concerned with ensuring the privacy of participating users. To motivate participation and address privacy concerns, we propose iSafe, a privacy preserving algorithm for computing safety snapshots of co-located mobile devices as well as geosocial network users. iSafe combines geolocation data extracted from crime datasets and geosocial networks such as Yelp. In order to enhance iSafe's ability to compute safety recommendations, even when crime information is incomplete or sparse, we need to identify relationships between Yelp venues and crime indices at their locations. To achieve this, we use SpsJoin on two datasets (Yelp venues and geolocated businesses) to find venues that have not been reviewed and to further compute the crime indices of their locations. Our results show a statistically significant dependence between location crime indices and Yelp features. Third, review centered LBSs (e.g., Yelp) are increasingly becoming targets of malicious campaigns that aim to bias the public image of represented businesses. Although Yelp actively attempts to detect and filter fraudulent reviews, our experiments showed that Yelp is still vulnerable. Fraudulent LBS information also impacts the ability of iSafe to provide correct safety values. We take steps toward addressing this problem by proposing SpiDeR, an algorithm that takes advantage of the richness of information available in Yelp to detect abnormal review patterns. We propose a fake venue detection solution that applies SpsJoin on Yelp and U.S. housing datasets. We validate the proposed solutions using ground truth data extracted by our experiments and reviews filtered by Yelp.

Caietanus super libros de anima cu[m] duplici textus tra[n]slatione, antiqua s[cilicet] Ioa[n]nis Argiropyli, que semper primo loco ponitur ; Eiusde[m] questiones de sensu age[n]te [et] de sensibilibus co[m]munibus, ac de intellectu. Item de substantia or

Pie de imp. tomado del colofón

Trace elements and electrolytes in human resting mixed saliva after exercise

Objectives—Exercise is known to cause changes in the concentration of salivary components such as amylase, Na, and Cl. The aim of this investigation was to evaluate the eVect of physical exercise on the levels of trace elements and electrolytes in whole (mixed) saliva. Methods—Forty subjects performed a maximal exercise test on a cycle ergometer. Samples of saliva were obtained before and immediately after the exercise test. Sample concentrations of Fe, Mg, Sc, Cr, Mn, Co, Cu, Zn, Se, Sr, Ag, Sb, Cs, and Hg were determined by inductively coupled plasma mass spectrometry and concentrations of Ca and Na by atomic absorption spectrometry. Results—After exercise, Mg and Na levels showed a significant increase (p<0.05) while Mn levels fell (p<0.05). Zn/Cu molar ratios were unaVected by exercise. Conclusions—Intense physical exercise induced changes in the concentrations of only three (Na, Mg, and Mn) of the 16 elements analysed in the saliva samples. Further research is needed to assess the clinical implications of these findings.

¡Porque ni putas, ni peluqueras, ni nada… somos ciudadanas!’: Reflexiones sobre ciudadanía desde un grupo trans en la ciudad de Bogotá

‘¡Porque ni putas, ni peluqueras, ni nada… somos ciudadanas!’. Se pregunta por cómo se puede entender la ciudadanía desde las acciones comunitarias que llevaron a cabo un grupo de mujeres trans en la ciudad de Bogotá . Según informes nacionales y a nivel Latinoamérica son las mujeres trans pertenecientes al sector LGBT las que dijeron sentir, en mayor número, vulnerados sus derechos entorno a trabajo, salud y educación en la capital del país en comparación a la población LGB. La causa de tal vulneración pareció coincidir con su identidad de género, por ejemplo, al no poder encontrar trabajo por las expresiones de género que utilizaban. Por ende era necesario abordar cómo se entiende la ciudadanía desde corporalidades que no han tenido un óptimo acceso a la ciudad teniendo como referencia sus experiencias personales. Siendo el tránsito un proceso que se hace a lo largo del tiempo.

Procesos hopping a través del modelo difusional en materiales nanocristalinos usados para aplicaciones fotovoltaicas

Se presentan los modelos de hopping de rango variable (variable range hopping; VRH), vecinos cercanos (nearest neighbor hopping; NNH) y barreras de potencial presentes en las fronteras de grano; como mecanismos de transporte eléctrico predominantes en los materiales semiconductores para aplicaciones fotovoltaicas. Las medidas de conductividad a oscuras en función de temperatura fueron realizadas para región de bajas temperaturas entre 120 y 400 K con Si y compuestos Cu3BiS2 y Cu2ZnSnSe4. Siguiendo la teoría de percolación, se obtuvieron parámetros hopping y la densidad de estados cerca del nivel de Fermi, N(EF), para todas las muestras. A partir de los planteamientos dados por Mott para VRH, se presentó el modelo difusional, que permitió establecer la relación entre la conductividad y la densidad de estados de defecto o estados localizados en el gap del material. El análisis comparativo entre modelos, evidenció, que es posible obtener mejora hasta de un orden de magnitud en valores para cada uno de los parámetros hopping que caracterizan el material.

Sintesi e caratterizzazione di cluster Ag-Cu-Fe, Au-Cu-Fe e Ni-Pd

Durante il mio periodo di tirocinio mi sono occupato della sintesi e caratterizzazione di cluster carbonilici eterometallici, ed in particolare di cluster Ag-Cu-Fe, Au-Cu-Fe, e Ni-Pd. In un primo momento il lavoro si è concentrato sullo studio della reazione tra cluster Cu-Fe e sali di Ag e Au, con lo scopo di ottenere specie Ag-Cu-Fe, e Au-Cu-Fe. Nella seconda parte l’attività è stata incentrata sulla sintesi di cluster Ni-Pd ad elevata nuclearità, attraverso reazioni tra [Ni6(CO)12]2- e composti di Pd(II). In entrambi i casi le sintesi sono state condotte variando i rapporti stechiometrici dei reagenti e i solventi, permettendo l’ottenimento di specie, caratterizzate spettroscopicamente mediante tecnica IR. In alcuni casi è stato anche possibile ottenere cristalli caratterizzati strutturalmente tramite diffrattometria a raggi X. Le reazioni di [Cu3Fe3(CO)12]3- con quantità crescenti di M=Ag, Au danno luogo alla formazione in sequenza di [Cu5Fe4(CO)16]3-, [MxCu5-xFe4(CO)16]3- (x = 0-5), [M5Fe4(CO)16]3-, [M6Fe4(CO)16]2-. Successivamente, nel caso in cui M= Ag, un ulteriore aggiunta di sali di M+ porta alla formazione di [Ag13Fe8(CO)32]3-, mentre se M= Au si formano i cosiddetti “bruni d’oro” e alla fine, [AuFe4(CO)16]-. Le specie [MxCu5-xFe4(CO)16]3- risultano particolarmente interessanti dato che possono essere viste come leghe molecolari M/Cu, che mostrano disordine sia sostituzionale che composizionale. Per quanto riguarda i cluster Ni-Pd sono state ottenute tre nuove specie carboniliche ad elevata nuclearità, ovvero [Ni37-xPd7+x(CO)48]6- (x= 0,69), [HNi37-xPd7+x(CO)48]5- (x= 0,53) and [Ni22-xPd20+x(CO)48]6- (x = 0.63). In tutte queste strutture il Pd tende ad occupare posizioni che minimizzano le interazioni Pd-CO massimizzando le interazioni M-M, mentre l’opposto risulta per il Ni. Ciò si traduce in una parziale segregazione dei due metalli, anche se alcuni fenomeni di disordine (sostituzionale e composizionale) sono presenti in tali strutture.

Developing a methodology for co-creation using extended reality technologies.

Amid the remarkable growth of innovative technologies, particularly immersive technologies like Extended Reality (XR) (comprising of Virtual Reality (VR), Augmented Reality (AR) & Mixed Reality (MR)), a transformation is unfolding in the way we collaborate and interact. The current research takes the initiative to explore XR’s potential for co-creation activities and proposes XR as a future co-creation platform. It strives to develop a XR-based co-creation system, actively engage stakeholders in the co-creation process, with the goal of enhancing their creative businesses. The research leverages XR tools to investigate how they can enhance digital co-creation methods and determine if the system facilitates efficient and effective value creation during XR-based co-creation sessions. In specific terms, the research probes into whether the XR-based co-creation method and environment enhances the quality and novelty of ideas, reduce communication challenges by providing better understanding of the product, problem or process and optimize the process in terms of reduction in time and costs. The research introduces a multi-user, multi-sensory collaborative and interactive XR platform that adapts to various use-case scenarios. This thesis also presents the user testing performed to collect both qualitative and quantitative data, which serves to substantiate the hypothesis. What sets this XR system apart is its incorporation of fully functional prototypes into a mixed reality environment, providing users with a unique dimension within an immersive digital landscape. The outcomes derived from the experimental studies demonstrate that XR-based co-creation surpasses conventional desktop co-creation methods and remarkably, the results are even comparable to a full mock-up test. In conclusion, the research underscores that the utilization of XR as a tool for co-creation generates substantial value. It serves as a method that enhances the process, an environment that fosters interaction and collaboration, and a platform that equips stakeholders with the means to engage effectively.

Tuning The Surface Anisotropy In Fe-doped Nio Nanoparticles.

Ni(1-x)FexO nanoparticles have been obtained by the co-precipitation chemical route. X-ray diffraction analyses using Rietveld refinement have shown a slight decrease in the microstrain and mean particle size as a function of the Fe content. The zero-field-cooling (ZFC) and field-cooling (FC) magnetization curves show superparamagnetic behavior at high temperatures and a low temperature peak (at T = 11 K), which is enhanced with increasing Fe concentration. Unusual behavior of the coercive field in the low temperature region and an exchange bias behavior were also observed. A decrease in the Fe concentration induces an increase in the exchange bias field. We argue that these behaviors can be linked with the strengthening of surface anisotropy caused by the incorporation of Fe ions.

Possible Unconventional Superconductivity In Substituted Bafe2as2 Revealed By Magnetic Pair-breaking Studies.

The possible existence of a sign-changing gap symmetry in BaFe2As2-derived superconductors (SC) has been an exciting topic of research in the last few years. To further investigate this subject we combine Electron Spin Resonance (ESR) and pressure-dependent transport measurements to investigate magnetic pair-breaking effects on BaFe1.9M0.1As2 (M = Mn, Co, Cu, and Ni) single crystals. An ESR signal, indicative of the presence of localized magnetic moments, is observed only for M = Cu and Mn compounds, which display very low SC transition temperature (Tc) and no SC, respectively. From the ESR analysis assuming the absence of bottleneck effects, the microscopic parameters are extracted to show that this reduction of Tc cannot be accounted by the Abrikosov-Gorkov pair-breaking expression for a sign-preserving gap function. Our results reveal an unconventional spin- and pressure-dependent pair-breaking effect and impose strong constraints on the pairing symmetry of these materials.

Combined External Pressure And Cu-substitution Studies On Bafe2as2 Single Crystals.

We report a combined study of external pressure and Cu-substitution on BaFe2As2 single crystals grown by the in-flux technique. At ambient pressure, the Cu-substitution is known to suppress the spin density wave (SDW) phase in pure BaFe2As2(TSDW ≈ 140 K) and to induce a superconducting (SC) dome with a maximum transition temperature [Formula: see text]. This [Formula: see text] is much lower than the Tc ∼ 15-28 K achieved in the case of Ru, Ni and Co substitutions. Such a lower Tc is attributed to a Cu(2+) magnetic pair-breaking effect. The latter is strongly suppressed by applied pressure, as shown herein, Tc can be significantly enhanced by applying high pressures. In this work, we investigated the pressure effects on Cu(2+) magnetic pair-breaking in the BaFe2-xCuxAs2 series. Around the optimal concentration (xopd = 0.11), all samples showed a substantial increase of Tc as a function of pressure. Yet for those samples with a slightly higher doping level (over-doped regime), Tc presented a dome-like shape with maximum Tc ≃ 8 K. Remarkably interesting, the under-doped samples, e.g. x = 0.02 display a maximum pressure induced Tc ≃ 30 K which is comparable to the maximum Tc's found for the pure compound under external pressures. Furthermore, the magnetoresistance effect as a function of pressure in the normal state of the x = 0.02 sample also presented an evolution consistent with the screening of the Cu(2+) local moments. These findings demonstrate that the Cu(2+) magnetic pair-breaking effect is completely suppressed by applying pressure in the low concentration regime of Cu(2+) substituted BaFe2As2.