A low-voltage RF-CMOS receiver front-end for a wireless fall detection microsystem

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e de Computadores, pela Universidade Nova de Ciências e Tecnologia

Optimal job design in the presence of implicit contracts

We characterize the optimal job design in a multitasking environment when the firms rely on implicit incentive contracts (i.e., bonus payments). Two natural forms of job design are compared: (i) individual accountability, where each agent is assigned to a particular job and assumes full responsibility for its outcome; and (ii) team accountability, where a group of agents share responsibility for a job and are jointly accountable for its outcome. The key trade-off is that team accountability mitigates the multitasking problem but may weaken the implicit contracts. The optimal job design follows a cut-off rule: firms with high reputation concerns opt for team accountability, whereas firms with low reputation concerns opt for individual accountability. Team accountability is more likely the more acute the multitasking problem is. However, the cut-off rule need not hold if the firm combines implicit incentives with explicit pay-per-performance contracts.

Adaptação cultural e contributo para a validação da escala petterns of activity measura - pain (POAM-P)

RESUMO: A dor lombar crónica (DLC) é uma das condições clínicas mais comuns e com elevados custos socioeconómicos no mundo ocidental. Estudos recentes indicam que os utentes com DLC apresentam diferentes padrões de atividade que influenciam os níveis de incapacidade funcional. Contudo, a evidência acerca destas associações é, ainda, limitada e inconclusiva. Em Portugal, não existe, do nosso conhecimento, nenhuma escala validada para a população portuguesa que meça estes padrões de atividade em utentes com DLC. Objetivos: Adaptar culturalmente a escala Patterns of Activity Measure – Pain (POAM-P) para a população portuguesa com dor lombar crónica inespecífica (DLCI) e contribuir para a sua validação. Metodologia: A versão original (inglesa) do POAM-P foi traduzida e adaptada para a língua portuguesa (POAM-P-VP) através de uma equipa multidisciplinar que incluiu tradutores, retrotradutores (cegos e independentes), peritos de diferentes áreas e utentes com DLCI, de acordo com as recomendações de linhas orientadoras atuais para este processo. A análise factorial e das propriedades psicométricas da POAM-P-VP contou com uma amostra de 132 utentes. A consistência interna foi analisada através do coeficiente alpha de Cronbach (α) e para a análise da fiabilidade teste-reteste recorreu-se ao coeficiente de correlação intraclasse (ICC:2,1). A análise da validade de construto convergente e discriminativa das componentes da POAM-P-VP foi conseguida através da aplicação da versão portuguesa da escala Tampa Scale of Kinesiophobia (TSK-13-VP), e recorrendo ao cálculo do coeficiente de Spearman. Todos os cálculos estatísticos foram realizados no software IBM SPSS Statistics (versão 20). Resultados: A análise factorial permitiu identificar três componentes da POAM-P-VP (evitamento, persistência excessiva e persistência consistente com a dor), sendo estruturalmente diferentes das subescalas do POAM-P original. Estas componentes apresentaram uma consistência interna boa a elevada. As componentes 1 e 2 apresentaram uma fiabilidade teste-reteste moderada a excelente, e a componente 3 uma fiabilidade teste-reteste pobre, limitando o seu poder de uso na prática clínica e em investigação. Relativamente à validade de construto, nenhuma das hipóteses estabelecidas no estudo apriori foram verificadas, não podendo aferir acerca da relação dos padrões de atividade com a cinesiofobia, medida pelo TSK-13-VP. Porém, a componente de evitamento da POAM-P-VP parece medir conteúdos partilhados com a TSK-13-VP (rs = 0.15, p<0.048). Conclusão: A adaptação e contributo para a validação da versão portuguesa da escala POAM-P constituiu um ponto de partida para a existência de um instrumento de medição de padrões de atividade de utentes portugueses com DLC, requerendo mais estudos para a sua validação. Apesar de algumas limitações, considera-se que este estudo é de grande importância para os fisioterapeutas e investigadores que buscam um maior conhecimento e efetividade das abordagens de intervenção em utentes com dor lombar crónica.-------------- ABSTRACT: Chronic low back pain (CLBP) is one of the most common clinical conditions as well as one with high economical costs within western countries. Recent studies have shown that patients with LBP present different patterns of activity which influence their levels of functional capacity. However, evidence on these associations is still limited and inconclusive. To our knowledge, there is in Portugal no valid scale for measuring these patterns of activity in CLBP patients. Purpose: Culturally adapt the Patterns of Activity Measure – Pain (POAM-P) scale to the Portuguese population with non-specific chronic low back pain (NSLBP) and contribute to its validation. Method: The original English version of POAM-P was blindly and independently translated, back translated and adapted to the Portuguese language (POAM-P-VP) by a multidisciplinary team of translators, experts from different fields, and patients with NSLBP, according to established guidelines for this process. Factorial and psychometric properties’ analysis of POAM-P-VP comprised a sample of 132 patients. The internal consistency was analyzed based on Cronbach's alpha-coefficient (α) and for test-retest reliability analysis the Intraclass Correlation Coefficient (ICC) was used. The analysis of convergent and discriminant construct validity of POAM-P-VP components was achieved through the use of the Portuguese version of the Tampa Scale of Kinesiophobia (TSK-13-VP), using the Spearman coefficient calculation. All statistical calculations were performed using IBM SPSS Statistics software (v.20). Results: The factor analysis allowed for the identification of three components of POAM-P-VP (avoidance, excessive persistence and pain-contingent persistence), structurally different from the original POAM-P subscales. These components demonstrated a good to high level of internal consistency. Components 1 and 2 demonstrated moderate to excellent test-retest reliability, whereas component 3 presented low test-retest reliability thus limiting its clinical and investigative use. With regard to construct validity, none of the previously established hypothesis was verified, therefore not making it possible to assess the relation between activity patterns and kinesiophobia, measured by TSK-13-VP. However, the avoidance component of POAM-P-VP seems to share measurable contents with TSK-13-VP (rs = 0.15, p<0.048). Conclusion: The adaptation and contribution to the validation of the Portuguese version of POAM-P scale, sets a starting point to the existence of a useful instrument for measuring activity patterns in Portuguese CLBP patients, requiring further studies towards its validation. Despite some limitations, this study is considered of high importance to physiotherapists as well as investigators in search of deeper knowledge and effective practical approaches on chronic low back pain patients.

Reframing reverse logistics, reducing costs

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

How to improve supply chain performance of a specialized retailer: Managing landed costs of Zippy’s global supply chain

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Very low prevalence of hepatitis C virus infection in rural communities of northeastern Brazil with a high prevalence of schistosomiasis mansoni

The association of hepatitis C virus infection and the hepatosplenic form of schistosomiasis mansoni has been claimed to result in the concomitant evolution of the two pathologies, with a poor prognosis due to aggravated liver disease. Recently, however, some authors have begun to reject the hypothesis of a higher susceptibility of hepatosplenic schistosomal patients to HCV. The aim of the present transverse study carried out between July and August 1990 was to determine the possible association between SM and HCV markers in residents of Catolândia, Bahia State. Anti-HCV markers were assayed by ELISA-II and RIBA-II in serum samples obtained from 1,228 residents (85.8%). The anti-HCV antibody (ELISA-II) was positive in six (0.5%) individuals, eight (0.6%) cases were inconclusive and 1,214 (98.9%) were negative. However, only in one ELISA-positive serum sample (0.08%) were antibodies confirmed by RIBA-II, while two other samples assayed by RIBA-II were indeterminate. These three patients presented the hepatointestinal form of SM during the follow-up period (1976 to 1996). In conclusion, no association was observed between HCV and SM in the endemic area studied, especially among patients with the hepatosplenic form of the disease.

Design and development of a microfluidic platform for use with colorimetric gold nanoprobe assays

Due to the importance and wide applications of the DNA analysis, there is a need to make genetic analysis more available and more affordable. As such, the aim of this PhD thesis is to optimize a colorimetric DNA biosensor based on gold nanoprobes developed in CEMOP by reducing its price and the needed volume of solution without compromising the device sensitivity and reliability, towards the point of care use. Firstly, the price of the biosensor was decreased by replacing the silicon photodetector by a low cost, solution processed TiO2 photodetector. To further reduce the photodetector price, a novel fabrication method was developed: a cost-effective inkjet printing technology that enabled to increase TiO2 surface area. Secondly, the DNA biosensor was optimized by means of microfluidics that offer advantages of miniaturization, much lower sample/reagents consumption, enhanced system performance and functionality by integrating different components. In the developed microfluidic platform, the optical path length was extended by detecting along the channel and the light was transmitted by optical fibres enabling to guide the light very close to the analysed solution. Microfluidic chip of high aspect ratio (~13), smooth and nearly vertical sidewalls was fabricated in PDMS using a SU-8 mould for patterning. The platform coupled to the gold nanoprobe assay enabled detection of Mycobacterium tuberculosis using 3 8l on DNA solution, i.e. 20 times less than in the previous state-of-the-art. Subsequently, the bio-microfluidic platform was optimized in terms of cost, electrical signal processing and sensitivity to colour variation, yielding 160% improvement of colorimetric AuNPs analysis. Planar microlenses were incorporated to converge light into the sample and then to the output fibre core increasing 6 times the signal-to-losses ratio. The optimized platform enabled detection of single nucleotide polymorphism related with obesity risk (FTO) using target DNA concentration below the limit of detection of the conventionally used microplate reader (i.e. 15 ng/μl) with 10 times lower solution volume (3 μl). The combination of the unique optical properties of gold nanoprobes with microfluidic platform resulted in sensitive and accurate sensor for single nucleotide polymorphism detection operating using small volumes of solutions and without the need for substrate functionalization or sophisticated instrumentation. Simultaneously, to enable on chip reagents mixing, a PDMS micromixer was developed and optimized for the highest efficiency, low pressure drop and short mixing length. The optimized device shows 80% of mixing efficiency at Re = 0.1 in 2.5 mm long mixer with the pressure drop of 6 Pa, satisfying requirements for the application in the microfluidic platform for DNA analysis.

A domain specific language for domotic systems

To cope with modernity, the interesting of having a fully automated house has been increasing over the years, as technology evolves and as our lives become more stressful and overloaded. An automation system provides a way to simplify some daily tasks, allowing us to have more spare time to perform activities where we are really needed. There are some systems in this domain that try to implement these characteristics, but this kind of technology is at its early stages of evolution being that it is still far away of empowering the user with the desired control over a habitation. The reason is that the mentioned systems miss some important features such as adaptability, extension and evolution. These systems, developed from a bottom-up approach, are often tailored for programmers and domain experts, discarding most of the times the end users that remain with unfinished interfaces or products that they have difficulty to control. Moreover, complex behaviors are avoided, since they are extremely difficult to implement mostly due to the necessity of handling priorities, conflicts and device calibration. Besides, these solutions are only reachable at very high costs, yet they still have the limitation of being difficult to configure by non-technical people once in runtime operation. As a result, it is necessary to create a tool that allows the execution of several automated actions, with an interface that is easy to use but at the same time supports all the main features of this domain. It is also desirable that this tool is independent of the hardware so it can be reused, thus a Model Driven Development approach (MDD) is the ideal option, as it is a method that follows those principles. Since the automation domain has some very specific concepts, the use of models should be combined with a Domain Specific Language (DSL). With these two methods, it is possible to create a solution that is adapted to the end users, but also to domain experts and programmers due to the several levels of abstraction that can be added to diminish the complexity of use. The aim of this thesis is to design a Domain Specific Language (DSL) that uses the Model Driven Development approach (MDD), with the purpose of supporting Home Automation (HA) concepts. In this implementation, the development of simple and complex scenarios should be supported and will be one of the most important concerns. This DSL should also support other significant features in this domain, such as the ability to schedule tasks, which is something that is limited in the current existing solutions.

eHealth e a adoção da inovação em assisted living technologies : o caso das demências

RESUMO - Assistimos hoje a um contexto marcado (i) pelo progressivo envelhecimento das sociedades ocidentais, (ii) pelo aumento da prevalência das doenças crónicas, de que as demências são um exemplo, (iii) pelo significativo aumento dos custos associados a estas patologias, (iv) por orçamentos públicos fortemente pressionadas pelo controlo da despesa, (v) por uma vida moderna que dificulta o apoio intergeracional, tornando o suporte proporcionado pelos filhos particularmente difícil, (vi) por fortes expectativas relativamente à prestação de cuidados de saúde com qualidade. Teremos assim de ser capazes de conseguir melhorar os serviços de saúde, ao mesmo tempo que recorremos a menos recursos financeiros e humanos, pelo que a inovação parece ser crítica para a sustentabilidade do sistema. Contudo a difusão das Assistive Living Technologies, apesar do seu potencial, tem sido bastante baixa, nomeadamente em Portugal. Porquê? Hamer, Plochg e Moreira (2012), no editorial do International Journal of Healthcare Management, enquadram a Inovação como “podendo ser imprevisível e mesmo dolorosa, pelo que talvez possamos não ficar surpreendidos se surgirem resistências e que, inovações bastante necessárias, capazes de melhorar os indicadores de saúde, tenham sido de adoção lenta ou que tenham mesmo sido insustentáveis”. Em Portugal não há bibliografia que procure caracterizar o modelo de difusão da inovação em eHealth ou das tecnologias de vivência assistida. A bibliografia internacional é igualmente escassa. O presente projeto de investigação, de natureza exploratória, tem como objetivo principal, identificar barreiras e oportunidades para a implementação de tecnologias eHealth, aplicadas ao campo das demências. Como objetivos secundários pretendemse identificar as oportunidades e limitações em Portugal: mapa de competências nacionais, e propor medidas que possa acelerar a inovação em ALT, no contexto nacional. O projeto seguirá o modelo de um estudo qualitativo. Para o efeito foram conduzidas entrevistas em profundidade junto de experts em ALT, procurando obter a visão daqueles que participam do lado da Oferta- a Indústria; do lado da Procura- doentes, cuidadores e profissionais de saúde; bem como dos Reguladores. O instrumento utilizado para a recolha da informação pretendida foi o questionário não estruturado. A análise e interpretação da informação recolhida foram feitas através da técnica de Análise de Conteúdo. Os resultados da Análise de Conteúdo efetuada permitiram expressar a dicotomia barreira/oportunidade, nas seguintes categorias aqui descritas como contextos (i) Contexto Tecnológico, nas subcategorias de Acesso às Infraestruturas; Custo da Tecnologia; Interoperabilidade, (ii) Contexto do Valor Percecionado, nas subcategorias de Utilidade; Eficiência; Divulgação, (iii) Contexto Político, compreendendo a Liderança; Organização; Regulação; Recursos, (iv) Contexto Sociocultural, incluindo nomeadamente Idade; Literacia; Capacidade Económica, (v) Contexto Individual, incluindo como subcategorias, Capacidade de Adaptação a Novas tecnologias; Motivação; Acesso a equipamentos (vi) Contexto Específico da Doença, nomeadamente o Impacto Cognitivo; Tipologia Heterogénea e a Importância do Cuidador. Foi proposto um modelo exploratório, designado de Modelo de Contextos e Forças, que estudos subsequentes poderão validar. Neste modelo o Contexto Tecnológico é um Força Básica ou Fundamental; o Contexto do Valor Percecionado, constitui-se numa Força Crítica para a adoção de inovação, que assenta na sua capacidade para oferecer valor aos diversos stakeholders da cadeia de cuidados. Temos também o Contexto Político, com capacidade de modelar a adoção da inovação e nomeadamente com capacidade para o acelerar, se dele emitir um sinal de urgência para a mudança. O Contexto Sociocultural e Individual expressam uma Força Intrínseca, dado que elas são características internas, próprias e imutáveis no curto-prazo, das sociedade e das pessoas. Por fim há que considerar o Contexto Específico da Doença, nesta caso o das demências. Das conclusões do estudo parece evidente que as condições tecnológicas estão medianamente satisfeitas em Portugal, com evidentes progressos nos últimos anos (exceção para a interoperabilidade aonde há necessidade de maiores progressos), não constituindo portanto barreira à introdução de ALT. Aonde há necessidade de investir é nas áreas do valor percebido. Da análise feita, esta é uma área que constitui uma barreira à introdução e adoção das ALT em Portugal. A falta de perceção do valor que estas tecnologias trazem, por parte dos profissionais de saúde, doentes, cuidadores e decisores políticos, parece ser o principal entrave à sua adoção. São recomendadas estratégias de modelos colaborativos de Investigação e Desenvolvimento e de abordagens de cocriação com a contribuição de todos os intervenientes na cadeia de cuidados. Há também um papel que cabe ao estado no âmbito das prioridades e da mobilização de recursos, sendo-lhe requerida a expressão do sentido de urgência para que esta mudança aconteça. Foram também identificadas oportunidades em diversas áreas, como na prevenção, no diagnóstico, na compliance medicamentosa, na terapêutica, na monitorização, no apoio à vida diária e na integração social. O que é necessário é que as soluções encontradas constituam respostas àquilo que são as verdadeiras necessidades dos intervenientes e não uma imposição tecnológica que só por si nada resolve. Do estudo resultou também a perceção de que há que (i) continuar a trabalhar no sentido de aproximar a comunidade científica, da clínica e do doente, (ii) fomentar a colaboração entre centros, com vista à criação de escala a nível global. Essa colaboração já parece acontecer a nível empresarial, tendo sido identificadas empresas Portuguesas com vocação global. A qualidade individual das instituições de ensino, dos centros de investigação, das empresas, permite criar as condições para que Portugal possa ser país um piloto e um case-study internacional em ALT, desde que para tal pudéssemos contar com um trabalho colaborativo entre instituições e com decisões políticas arrojadas.

Late onset sepsis and intestinal bacterial colonization in very low birth weight infants receiving long-term parenteral nutrition

INTRODUCTION: The purpose of this study was to establish the late onset sepsis (LOS) rate of our service, characterize the intestinal microbiota and evaluate a possible association between gut flora and sepsis in surgical infants who were receiving parenteral nutrition (PN). METHODS: Surveillance cultures of the gut were taken at the start of PN and thereafter once a week. Specimens for blood culture were collected based on clinical criteria established by the medical staff. The central venous catheter (CVC) tip was removed under aseptic conditions. Standard laboratory methods were used to identify the microorganisms that grew on cultures of gut, blood and CVC tip. RESULTS: 74 very low birth weight infants were analyzed. All the infants were receiving PN and antibiotics when the gut culture was started. In total, 21 (28.4%) infants experienced 28 episodes of LOS with no identified source. Coagulase negative staphylococci were the most common bacteria identified, both in the intestine (74.2%) and blood (67.8%). All infections occurred in patients who received PN through a central venous catheter. Six infants experienced episodes of microbial translocation. CONCLUSIONS: In this study, LOS was the most frequent episode in neonates receiving parenteral nutrition who had been submitted to surgery; 28.6% of this infection was probably a gut-derived phenomenon and requires novel strategies for prevention.

Is low worker mobility evidence for monopsony power?

Major in Competition and Regulation

Structured products in the current low interest rate environment

Directed Research Internship

Design and characterization of novel biopolymeric structure using biocompatible ionic liquids

The main objective of this thesis was the development of polymeric structures from the dissolution of FucoPol, a bacterial exopolysaccharide (EPS), in a biocompatible ionic liquid, choline acetate. The FucoPol was produced by the bacteria Enterobacter A47 using glycerol as carbon source at controlled temperature and pH (30ºC and 7, respectively). At the end of 3 days it was produced 7 g/L of FucoPol. The net yield of Fucopol in glycerol (YP/S) was 0.22 g/g and the maximum productivity 2.37 g/L.d This polymer was characterized about its composition in sugars and acyl groups (by High-Performance Liquid Chromatography - HPLC), containing fucose (35 % mol), galactose (21 % mol), glucose (29 % mol), rhamnose (3% mol) and glucuronic acid (12% mol) as well as acetate (14.28 % mol), pyruvate (2.15 % mol) and succinate (1.80 % mol). Its content of water and ash was 15% p/p and 2% p/p, respectively, and the chemical bonds (determined by Infrared Spectroscopy - FT-IR) are consistent to the literature reports. However, due to limitations in Differential Scanning Calorimetry (DSC) equipment it was not possible to determine the glass transition temperature. In turn, the ionic liquid showed the typical behavior of a Newtonian fluid, glass transition temperature (determined by DSC) -98.03ºC and density 1.1031 g/cm3. The study of chemical bonds by FT-IR showed that amount of water (8.80%) influenced the visualization of the bands predicted to in view of their chemical structure. After the dissolution of the FucoPol in the ionic liquid at different temperatures (50, 60, 80 and 100 ° C) it was promoted the removal of this by the phase inversion method using deionized water as a solvent, followed by drying in an oven at 70 ° C. The mixtures before and after the phase inversion method were characterized through the studies mentioned above. In order to explore possible application field’s biocompatibility assays and collage on balsa wood tests were performed. It was found that the process of washing with water by the phase inversion method was not totally effective in removing the biocompatible ionic liquid, since all FucoPol – IL mixtures still contained ionic liquid in their composition as can be seen by the DSC results and FT-IR. In addition, washing the mixtures with water significantly altered the composition of FucoPol. However, these mixtures, that developed a viscous behavior typical of a non-Newtonian fluid (shear-thinning), have the potential to be applied in the biomedical field as well as biological glues.

How to engage low category users through social media- The case of the make-up sector in Portugal

Purpose: This work project should be inevitably deemed as a practical approach to a marketing problem; “How to engage low category users through the social media – the case of the make-up sector in Portugal”. Design/methodology/approach: Online structured questionnaires and in-depth interviews were used. The questionnaire was answered by 110 women aged from 15 to 45 years old and the interviews were conducted with 14 women of the same age. The interviews provided key insights for the questionnaire formulation. Findings: Women are poorly informed on make-up properties and characteristics, feeling a genuine concern in regard to this subject. Lack of time, occasional usage and skin damage are the main barriers for make-up usage by low category users. Overcoming these aspects pass by demystifying the association of make-up with skin damage and emphasise the functional and emotional benefits of make-up. Further, brands need to create contents more consumer-oriented and ask directly to fans/followers suggestions and other insights. Resort to Portuguese “common” women for greater empathy in campaigns, promote online meetings between followers and make-up professionals on social media; and finally take advantage of the hybrid condition of Facebook, which incorporates multiple forms of content presentation, including videos, the most appealing format of make-up presentation for women. Research limitations/implications: Further studies addressing this topic, by using larger samples and study of specific make-up brands and campaign programs, over social media to reach a solid growth potential of make-up market evidences in Portugal. Originality/ value: Make-up brands are emphasising their interest in linking social media and marketing their promotional mix around social marketing.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.