Spatial multicriteria decision analysis for the siting of on-shore wind power in Kemiönsaari

Wind power is a low-carbon energy production form that reduces the dependence of society on fossil fuels. Finland has adopted wind energy production into its climate change mitigation policy, and that has lead to changes in legislation, guidelines, regional wind power areas allocation and establishing a feed-in tariff. Wind power production has indeed boosted in Finland after two decades of relatively slow growth, for instance from 2010 to 2011 wind energy production increased with 64 %, but there is still a long way to the national goal of 6 TWh by 2020. This thesis introduces a GIS-based decision-support methodology for the preliminary identification of suitable areas for wind energy production including estimation of their level of risk. The goal of this study was to define the least risky places for wind energy development within Kemiönsaari municipality in Southwest Finland. Spatial multicriteria decision analysis (SMCDA) has been used for searching suitable wind power areas along with many other location-allocation problems. SMCDA scrutinizes complex ill-structured decision problems in GIS environment using constraints and evaluation criteria, which are aggregated using weighted linear combination (WLC). Weights for the evaluation criteria were acquired using analytic hierarchy process (AHP) with nine expert interviews. Subsequently, feasible alternatives were ranked in order to provide a recommendation and finally, a sensitivity analysis was conducted for the determination of recommendation robustness. The first study aim was to scrutinize the suitability and necessity of existing data for this SMCDA study. Most of the available data sets were of sufficient resolution and quality. Input data necessity was evaluated qualitatively for each data set based on e.g. constraint coverage and attribute weights. Attribute quality was estimated mainly qualitatively by attribute comprehensiveness, operationality, measurability, completeness, decomposability, minimality and redundancy. The most significant quality issue was redundancy as interdependencies are not tolerated by WLC and AHP does not include measures to detect them. The third aim was to define the least risky areas for wind power development within the study area. The two highest ranking areas were Nordanå-Lövböle and Påvalsby followed by Helgeboda, Degerdal, Pungböle, Björkboda, and Östanå-Labböle. The fourth aim was to assess the recommendation reliability, and the top-ranking two areas proved robust whereas the other ones were more sensitive.

Adsorptiojäähdyttimen käytön kannattavuus kaukolämpöjärjestelmässä

Vantaa Energy has decided to find out the district cooling business opportunities in Vantaa. One reason for starting up the cooling business is Vantaa Energy's waste-to-energy power plant which is under construction. In the future, especially in the summer time there is an oversupply of district heating because of the new power plant. The cooling using the district heat could be one way to increase the consumption of district heat in the summer. This thesis examines the use of adsorption cooling profitability. Adsorption refrigerator is a machine which uses heat as the driving energy. At Vantaa Energy's case, district heat produced at cogeneration plants would be used. The literature section of this thesis includes descriptions of district cooling, building cooling demand, as well as different ways to produce cooling energy. A tool for profitability calculations was made. It shows the payback period, internal rate of return and net present value of different projects. Based on the calculations adsorption refrigeration is not profitable. This is primarily due to the high price of the adsorption refrigerator. Payback periods become long even when the used heat energy is free. In addition, the lack of availability of the refrigerators and operating experience could become a partial barrier to the use of technology even if the investment would become profitable.

La traduzione della letteratura per l’infanzia dal finlandese all’italiano: l’esempio degli albi illustrati di Mauri Kunnas

Despite the increasing number of research on translating for children, no study has so far taken into consideration the translations of children’s literature from Finnish into Italian. This dissertation sets out to fill this gap with a comparative study of Finnish picturebooks and their translations into Italian. Besides being the first research in the field analysing the shifts between these two systems, the study thoroughly investigates the characteristics of the translation process of picturebooks. The works chosen as case study are the Finnish picturebooks by Mauri Kunnas and their Italian translations from the period 1979-2009 because they are characterized by a high number of linguistic and cultural complexities which challenge translators’ skills and knowledge. The dissertation establishes whether and how culture-specific elements (anthroponyms, toponyms, food and allusions) and the word-image interaction have a significant impact on the quality and the nature of the target works, and also whether these aspects are still consistent after the translation and the adaptation process to the target system. Since picturebooks are multimodal texts whose message is produced by both the verbal and the visual, it has been necessary to use a multimodal comparative analysis. Such a descriptive comparative study has allowed me to describe the textual and cultural manipulations undergone by Kunnas’s picturebooks translated into Italian. Indeed, it has helped to identify what kind of shifts occur when cultural specific elements are transferred from the source system to the target one, to determine the most frequent translation strategies used to ensure a higher degree of readability, and to establish whether particular translation choices have contributed to modify the word-image interaction. The results of the multimodal comparative analysis have shown that Italian translators have been deeply influenced by the preponderance of the illustrations and for this reason they have often verbalised the visual and added information not originally contained in the source written text. Moreover, the findings of the analysis together with the interviews to the Italian translator and publishing house have also demonstrated that the latter aimed at producing works “good for the child” – and at the same time “good for the adult” – and at minimizing Finnish cultural specificity, even to the detriment of the aesthetic nature of the original picturebooks.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Implications of weeds of genus euphorbia for crop production: a review

The genus Euphorbia comprises about 2000 species ranging from annuals to trees, including C3, C4, and CAM species. Euphorbia species widely studied in agriculture includes E. antiquorum, E. carollata, E. dentata, E. dracunculoides, E. esula, E. geniculata, E. granulata, E. helioscopia, E. heterophylla, E. hierosolymitana, E. hirta, E. maculata, E. microphylla, E. nerifolia, E. piluifera, E. pulcherrima, E. royleana, E. supine, and E. thiamifolia. These species have been reported mainly in field crops/vegetables, orchards, pastures, and rangelands. Euphorbia plants may present allelopathic effect over desirable cereals, pulses, oilseeds, vegetables, forage plants, and nitrifying bacteria, posing a serious threat to livestock production on open range lands through the release of allelochemicals from roots, stems, leaves, and inflorescence in the rhizosphere. Leaves are reported to be more toxic than other plant parts. Competition of Euphorbia spp. against crop plants is the most important crop yield-limiting factor. The critical period for Euphorbia competition with crops is reported to take place between 17 to 70 days after emergence for most crops, depending on root development during the initial crop growth stage, crop height, tillering or branching capacity, whether weeds emerge at the same time as the crop or later after crop emergence; how quickly crop canopy develops and also on Euphorbia species. A yield reduction of 4-85% has been reported in field crops with different Euphorbia species and distinct occurrence densities. Euphorbia species decrease herbage production by 10 to 100% in pasture and rangelands, with many acting as natural insecticide, fungicide, nematidicide, immunopotentiator, or immunosuppressor.

On advancing business intelligence in the electricity retail market

In recent decades, business intelligence (BI) has gained momentum in real-world practice. At the same time, business intelligence has evolved as an important research subject of Information Systems (IS) within the decision support domain. Today’s growing competitive pressure in business has led to increased needs for real-time analytics, i.e., so called real-time BI or operational BI. This is especially true with respect to the electricity production, transmission, distribution, and retail business since the law of physics determines that electricity as a commodity is nearly impossible to be stored economically, and therefore demand-supply needs to be constantly in balance. The current power sector is subject to complex changes, innovation opportunities, and technical and regulatory constraints. These range from low carbon transition, renewable energy sources (RES) development, market design to new technologies (e.g., smart metering, smart grids, electric vehicles, etc.), and new independent power producers (e.g., commercial buildings or households with rooftop solar panel installments, a.k.a. Distributed Generation). Among them, the ongoing deployment of Advanced Metering Infrastructure (AMI) has profound impacts on the electricity retail market. From the view point of BI research, the AMI is enabling real-time or near real-time analytics in the electricity retail business. Following Design Science Research (DSR) paradigm in the IS field, this research presents four aspects of BI for efficient pricing in a competitive electricity retail market: (i) visual data-mining based descriptive analytics, namely electricity consumption profiling, for pricing decision-making support; (ii) real-time BI enterprise architecture for enhancing management’s capacity on real-time decision-making; (iii) prescriptive analytics through agent-based modeling for price-responsive demand simulation; (iv) visual data-mining application for electricity distribution benchmarking. Even though this study is from the perspective of the European electricity industry, particularly focused on Finland and Estonia, the BI approaches investigated can: (i) provide managerial implications to support the utility’s pricing decision-making; (ii) add empirical knowledge to the landscape of BI research; (iii) be transferred to a wide body of practice in the power sector and BI research community.

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.

Adaptive Dynamics of Resource Specialization

Ecological specialization in resource utilization has various facades ranging from nutritional resources via host use of parasites or phytophagous insects to local adaptation in different habitats. Therefore, the evolution of specialization affects the evolution of most other traits, which makes it one of the core issues in the theory of evolution. Hence, the evolution of specialization has gained enormous amounts of research interest, starting already from Darwin’s Origin of species in 1859. Vast majority of the theoretical studies has, however, focused on the mathematically most simple case with well-mixed populations and equilibrium dynamics. This thesis explores the possibilities to extend the evolutionary analysis of resource usage to spatially heterogeneous metapopulation models and to models with non-equilibrium dynamics. These extensions are enabled by the recent advances in the field of adaptive dynamics, which allows for a mechanistic derivation of the invasion-fitness function based on the ecological dynamics. In the evolutionary analyses, special focus is set to the case with two substitutable renewable resources. In this case, the most striking questions are, whether a generalist species is able to coexist with the two specialist species, and can such trimorphic coexistence be attained through natural selection starting from a monomorphic population. This is shown possible both due to spatial heterogeneity and due to non-equilibrium dynamics. In addition, it is shown that chaotic dynamics may sometimes inflict evolutionary suicide or cyclic evolutionary dynamics. Moreover, the relations between various ecological parameters and evolutionary dynamics are investigated. Especially, the relation between specialization and dispersal propensity turns out to be counter-intuitively non-monotonous. This observation served as inspiration to the analysis of joint evolution of dispersal and specialization, which may provide the most natural explanation to the observed coexistence of specialist and generalist species.

Engineer-to-order tuotteen ja tuotannon kehittäminen kohti massakustomointia

Tämän kandidaatinyön tavoitteena on selvittää keinoja joilla ETO-yhtiö voi kehittää tuotettaan ja tuotantoaan kohti massakustomointi. Lisäksi selvitetään mitkä asiat vaikuttavat asiakastilauksen kytkentäpisteen asettamiseen siirtyessä massakustomointiin. Työ on tehty kirjallisuuskatsauksena. Esitettyjen tietojen ja tulosten pohjana on alan kirjallisuus sekä julkaistut artikkelit. Työn perusteella voidaan todeta että parhaimmat keinot massakustomoinnin tavoitteluun ETO-yhtiölle ovat; tuotannon ja tuotteiden kehittäminen siten että pystytään hyödyntämään modularisointia ja komponenttien standardointia, lisäksi tuotesuunnitteluun käytettävää aikaa tulee vähentää automatisoimalla tuotesuunnittelua tai käyttämällä standardi suunnitelmia. ETO-yhtiössä siirtyessä massakustomointiin tulee asiakastilauksen kytkentäpisteen paikkaa asetettaessa ottaa huomioon tuotannon ja suunnittelun ulottuvuus kytkettynä asiakkaan vaatimuksiin.

Inviting the Audience – Interactive, Participatory, and Social Television in Finland

The television and the ways it has invited the audience to take part have been changing during the last decade. Today’s interaction, or rather participation, comes from multiplatform formats, such as TV spectacles that combine TV and web platforms in order to create a wider TV experience. Multiplatform phenomena have spread television consumption and traditional coffee table discussions to several different devices and environments. Television has become a part of the bigger puzzle of interconnected devices that operates on several platforms instead of just one. This thesis examines the Finnish television (2004–2014) through the notion of audience participation and introduces the technical, thematic, and social linkages as three different phases, interactive, participatory, social, and their most characteristic features in terms of audience participation. The aim of the study is also to focus on the idea of a possible change by addressing the possible and subtler variations that have taken place through the concept of digital television. Firstly, Finnish television history has gone through numerous trials, exploring the interactive potential of television formats. Finnish SMS-based iTV had its golden era around 2005, when nearly 50% of the television formats were to some extent interactive. Nowadays, interactive television formats have vanished due to their negative reputation and this important part of recent history is mainly been neglected in the academic scope. The dissertation focuses also on the present situation and the ways television content invites the audience to take part. “TV meets the Internet” is a global expression that characterises digital TV, and the use of the Web combined with television content is also examined. Also the linkages between television and social media are identified. Since television can nowadays be described multifaceted, the research approaches are also versatile. The research is based on qualitative content analysis, media observation, and Internet inquiry. The research material also varies. It consists of primary data: taped iTV formats, website material, and social media traces both from Twitter and Facebook and secondary data: discussion forums, observations from the media and Internet inquiry data. To sum up the results, the iTV phase represented, through its content, a new possibility for audiences to take part in a TV show (through gameful and textual features) in real-time. In participatory phase, the most characteristic features from TV-related content view, is the fact that online platform(s) were used to immerse the audience with additional material and, due to this, to extend the TV watching enjoyment beyond the actual broadcast. During the Social (media) phase, both of these features, real-timeness, and extended enjoyment through additional material, are combined and Facebook & Twitter, for example, are used to immerse people in live events (in real-time) via broadcast-related tweets and extra-material offered on a Facebook page. This thesis fills in the gap in Finnish television research by examining the rapid changes taken place on the field within the last ten years. The main results is that the development of Finnish digital television has been much more diverse and subtle than has been anticipated by following only the news, media, and contemporary discourses on the subject of television. The results will benefit both practitioners and academics by identifying the recent history of Finnish television.

Sensor communication in Smart cities and regions: An efficient IoT-based remote health monitoring system

Recent advances in Information and Communication Technology (ICT), especially those related to the Internet of Things (IoT), are facilitating smart regions. Among many services that a smart region can offer, remote health monitoring is a typical application of IoT paradigm. It offers the ability to continuously monitor and collect health-related data from a person, and transmit the data to a remote entity (for example, a healthcare service provider) for further processing and knowledge extraction. An IoT-based remote health monitoring system can be beneficial in rural areas belonging to the smart region where people have limited access to regular healthcare services. The same system can be beneficial in urban areas where hospitals can be overcrowded and where it may take substantial time to avail healthcare. However, this system may generate a large amount of data. In order to realize an efficient IoT-based remote health monitoring system, it is imperative to study the network communication needs of such a system; in particular the bandwidth requirements and the volume of generated data. The thesis studies a commercial product for remote health monitoring in Skellefteå, Sweden. Based on the results obtained via the commercial product, the thesis identified the key network-related requirements of a typical remote health monitoring system in terms of real-time event update, bandwidth requirements and data generation. Furthermore, the thesis has proposed an architecture called IReHMo - an IoT-based remote health monitoring architecture. This architecture allows users to incorporate several types of IoT devices to extend the sensing capabilities of the system. Using IReHMo, several IoT communication protocols such as HTTP, MQTT and CoAP has been evaluated and compared against each other. Results showed that CoAP is the most efficient protocol to transmit small size healthcare data to the remote servers. The combination of IReHMo and CoAP significantly reduced the required bandwidth as well as the volume of generated data (up to 56 percent) compared to the commercial product. Finally, the thesis conducted a scalability analysis, to determine the feasibility of deploying the combination of IReHMo and CoAP in large numbers in regions in north Sweden.

The transforming network of a foreign company operating in Mongolia. Case: A Finnish firm in Mongolia

In the globalising business environment ever fewer market areas remain unknown. Mongolia is yet only considered as an isolated strip between two power states. The purpose of this study is to put Mongolia on the map of academic business research. This is done by describing the transforming network of a foreign company operating in Mongolia. The objective of the study is approached through a case study, which presents the transformation of a Finnish company operating in Mongolia. This study aims at providing understanding on how the foreign case company observes the transformations of its network. The transformation within the case company is reflected to the transformations that occur in the Mongolian business environment. This study was conducted through a qualitative, intrinsic case study approach. The empirical data was gathered by using the method of network pictures. The network pictures were completed with the assistance of themed interviews. In order to be able to analyse the transformation within a network, three different time periods were observed: the past period around 2000, the present around 2014, and the estimated future around 2020. The data was collected from four executives positioned either in Finland, Russia or Mongolia. The respondents have a long experience within the case company, they hold managerial position, and therefore were able to offer valuable data for this study. The analytical framework used to analyse the collected data was built on the industrial network model, the ARA (actors-resources-activities)-model. The study shows that the changing business environment of Mongolia was utilised by the case company. In order to better meet the transforming customer wishes, the case company transformed from being a retailer to being a manufacturer. The case company was able to become a pioneer in the market. Thus, the case company has undergone similar kind of rapid transformation as the economy of Mongolia in entirety. This study shows that the general nature of the ARA-model makes it usable for new research contexts. The initial ARA-model offers a way to identify the dimensions of a network and a mean to understand these dimensions. The ARA-model can be applied to different contexts and to all time dimensions, past, present and future. The managerial recommendations offered in this study are directed towards the managers that plan to start operations in Mongolia. While this study is the first of its kind, it offers a good starting point for the future research on the change of Mongolian business networks. Valuable information could, for example, be obtained from a comparative study between the case company of this study and a multinational mining company operating in Mongolia.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Lauseen aspektin ilmaiseminen suomen kielessä. Tutkimus olla-, tehdä- ja tulla-verbillisistä tekstilauseista käyttökonteksteissaan

Tutkimuksessa tarkastellaan lauseen aspektin ilmaisemista suomen kielessä. Aspektia käsitellään merkityskategoriana, joka osoittaa lauseen kuvaaman asiaintilan ajallisen keston, ja perustavanlaatuisena aspektuaalisena erontekona pidetään rajattuuden ja rajaamattomuuden vastakohtaisuutta. Tutkimuksessa selvitetään, millä perusteella lauseet saavat joko rajatun tai rajaamattoman aspektitulkinnan ja miten konteksti vaikuttaa tähän tulkintaan. Lauseen kontekstina käsitellään kielellistä kontekstia eli tekstiä. Työ on aineistopohjainen tutkimus kirjoitetusta nykysuomesta, ja tarkastelun kohteena on sanomalehtiteksteistä koottu lauseaineisto. Lauseiden pääverbit ovat olla, tehdä ja tulla. Aineistosta on mahdollista esittää sekä kvalitatiivisia että kvantitatiivisia huomioita. Tutkimuksen teoreettisen ja metodologisen taustan muodostavat eräiden kognitiivisen kielitieteen suuntausten kuvauskäsitteet ja -metodit sekä fennistinen aspektin kuvaamisen perinne. Tutkimuksessa tarkastellaan kahta fennistiikassa esitettyä tapaa määritellä lauseen aspektimerkitys ja osoitetaan, että ne ovat toisiaan täydentäviä. Molemmat lähestymistavat huomioon ottamalla on siis mahdollista kuvata lauseen aspektimerkityksen määräytyminen täsmällisemmin kuin vain yhteen kuvaustapaan keskittymällä. Lisäksi osoitetaan, että keskeisinä aspektin ilmaisemisen keinoina pidetyt keston ja toistuvuuden adverbiaalit jäävät aineistossa marginaalisiksi. Ajankohdan adverbiaaleja puolestaan käsitellään aiemmasta tutkimuksesta poiketen rajattuina tarkastelunäkökulmina kuvattuun asiaintilaan, ja ne toimivat tässä tehtävässä liittyessään aspektiltaan rajaamattomiin lauseisiin. Lisäksi tutkimus osoittaa, että aspektin ilmaisemisen kerroksellisuutta voidaan aspektin ilmaisemiseen osallistuvien lauseenjäsenten kerrostumisen ohella tarkastella lausekokonaisuuden eri semanttisten tasojen kerrostumisena. Lausetta laajemman kontekstin vaikutusta aspektitulkintaan ei ole aiemmin tutkittu suomen kielessä. Tutkimus osoittaa, että aspektiltaan monitulkintaisten lauseiden konteksti voi selventää tulkinnan tai mahdollistaa samanaikaisesti vaihtoehtoiset tulkinnat. Lisäksi erilaisten lauseenulkoisten rajan ilmausten avulla on mahdollista osoittaa lauseen aspektin rajattuutta siinä tapauksessa, että lause muutoin ymmärrettäisiin aspektiltaan rajaamattomaksi.

Tilintarkastuksen odotuskuilu ja keinot odotuskuilun kaventamiseen kansainvälisten tieteellisten tutkimusten näkökulmasta

Tilintarkastuksen odotuskuilua on tutkittu pitkään ja yhtämittaisesti jo vuosikymmenten ajan ympäri maailmaa. Kansainvälisiä tutkimuksia tilintarkastuksen odotuskuilusta on valtava määrä, mutta tutkimustulokset odotuskuilun muodostumiseen vaikuttavista syistä ovat osittain epäselviä. Tämän pro gradu -tutkielman tavoitteena on koota yhteen kansainvälisten tutkimusten tuloksien pohjalta keskeisimmät syyt odotuskuilun muodostumiselle ja keinot odotuskuilun kaventamiseen käyttäen lähdemateriaalina 2000-luvulla ja sen jälkeen julkaistuja tutkimuksia. Tutkimus on toteutettu systemaattisena kirjallisuuskatsauksena. Lähdeaineisto haettiin systemaattisesti EBSCO-tietokannasta, jonka kautta lopulliseen aineistoon valikoitui yhteensä 31 tutkimusta. Tutkimustulokset osoittavat, että tilintarkastuksen odotuskuilu muodostuu ensisijaisesti johtuen yleisön kohtuuttomista odotuksista ja yleisön tietämättömyydestä tilintarkastajien velvollisuuksista. Todennäköisinä keinoina odotuskuilun kaventamisessa ovat tilintarkastusraportoinnin laajentaminen sekä yleisön kouluttaminen erityisesti tilintarkastajien roolista heitä koskevista velvollisuuksista. Tutkimustulokset eivät kuitenkaan osoittaneet yksimielistä keinoa siihen, kuinka yleisön kouluttaminen pitäisi toteuttaa.